arch/arm/mach-sa1100/pm.c

   1 /*
   2  * SA1100 Power Management Routines
   3  *
   4  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License.
   8  *
   9  * History:
  10  *
  11  * 2001-02-06:  Cliff Brake         Initial code
  12  *
  13  * 2001-02-25:  Sukjae Cho <sjcho@east.isi.edu> &
  14  *              Chester Kuo <chester@linux.org.tw>
  15  *                      Save more value for the resume function! Support
  16  *                      Bitsy/Assabet/Freebird board
  17  *
  18  * 2001-08-29:  Nicolas Pitre <nico@cam.org>
  19  *                      Cleaned up, pushed platform dependent stuff
  20  *                      in the platform specific files.
  21  *
  22  * 2002-05-27:  Nicolas Pitre   Killed sleep.h and the kmalloced save array.
  23  *                              Storage is local on the stack now.
  24  */
  25 #include <linux/init.h>
  26 #include <linux/suspend.h>
  27 #include <linux/errno.h>
  28 #include <linux/time.h>
  29
  30 #include <asm/hardware.h>
  31 #include <asm/memory.h>
  32 #include <asm/system.h>
  33 #include <asm/mach/time.h>
  34
  35 extern void sa1100_cpu_suspend(void);
  36 extern void sa1100_cpu_resume(void);
  37
  38 #define SAVE(x)         sleep_save[SLEEP_SAVE_##x] = x
  39 #define RESTORE(x)      x = sleep_save[SLEEP_SAVE_##x]
  40
  41 /*
  42  * List of global SA11x0 peripheral registers to preserve.
  43  * More ones like CP and general purpose register values are preserved
  44  * on the stack and then the stack pointer is stored last in sleep.S.
  45  */
  46 enum {  SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
  47         SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
  48
  49         SLEEP_SAVE_Ser1SDCR0,
  50
  51         SLEEP_SAVE_COUNT
  52 };
  53
  54
  55 static int sa11x0_pm_enter(suspend_state_t state)
  56 {
  57         unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
  58
  59         gpio = GPLR;
  60
  61         /* save vital registers */
  62         SAVE(GPDR);
  63         SAVE(GAFR);
  64
  65         SAVE(PPDR);
  66         SAVE(PPSR);
  67         SAVE(PPAR);
  68         SAVE(PSDR);
  69
  70         SAVE(Ser1SDCR0);
  71
  72         /* Clear previous reset status */
  73         RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
  74
  75         /* set resume return address */
  76         PSPR = virt_to_phys(sa1100_cpu_resume);
  77
  78         /* go zzz */
  79         sa1100_cpu_suspend();
  80
  81         cpu_init();
  82
  83         /*
  84          * Ensure not to come back here if it wasn't intended
  85          */
  86         PSPR = 0;
  87
  88         /*
  89          * Ensure interrupt sources are disabled; we will re-init
  90          * the interrupt subsystem via the device manager.
  91          */
  92         ICLR = 0;
  93         ICCR = 1;
  94         ICMR = 0;
  95
  96         /* restore registers */
  97         RESTORE(GPDR);
  98         RESTORE(GAFR);
  99
 100         RESTORE(PPDR);
 101         RESTORE(PPSR);
 102         RESTORE(PPAR);
 103         RESTORE(PSDR);
 104
 105         RESTORE(Ser1SDCR0);
 106
 107         GPSR = gpio;
 108         GPCR = ~gpio;
 109
 110         /*
 111          * Clear the peripheral sleep-hold bit.
 112          */
 113         PSSR = PSSR_PH;
 114
 115         return 0;
 116 }
 117
 118 unsigned long sleep_phys_sp(void *sp)
 119 {
 120         return virt_to_phys(sp);
 121 }
 122
 123 static struct platform_suspend_ops sa11x0_pm_ops = {
 124         .enter          = sa11x0_pm_enter,
 125         .valid          = suspend_valid_only_mem,
 126 };
 127
 128 static int __init sa11x0_pm_init(void)
 129 {
 130         suspend_set_ops(&sa11x0_pm_ops);
 131         return 0;
 132 }
 133
 134 late_initcall(sa11x0_pm_init);