arch/ppc/platforms/4xx/bamboo.c

   1 /*
   2  * Bamboo board specific routines
   3  *
   4  * Wade Farnsworth <wfarnsworth@mvista.com>
   5  * Copyright 2004 MontaVista Software Inc.
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 #include <linux/stddef.h>
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/errno.h>
  17 #include <linux/reboot.h>
  18 #include <linux/pci.h>
  19 #include <linux/kdev_t.h>
  20 #include <linux/types.h>
  21 #include <linux/major.h>
  22 #include <linux/blkdev.h>
  23 #include <linux/console.h>
  24 #include <linux/delay.h>
  25 #include <linux/initrd.h>
  26 #include <linux/seq_file.h>
  27 #include <linux/root_dev.h>
  28 #include <linux/tty.h>
  29 #include <linux/serial.h>
  30 #include <linux/serial_core.h>
  31 #include <linux/serial_8250.h>
  32 #include <linux/ethtool.h>
  33
  34 #include <asm/system.h>
  35 #include <asm/pgtable.h>
  36 #include <asm/page.h>
  37 #include <asm/dma.h>
  38 #include <asm/io.h>
  39 #include <asm/machdep.h>
  40 #include <asm/ocp.h>
  41 #include <asm/pci-bridge.h>
  42 #include <asm/time.h>
  43 #include <asm/todc.h>
  44 #include <asm/bootinfo.h>
  45 #include <asm/ppc4xx_pic.h>
  46 #include <asm/ppcboot.h>
  47
  48 #include <syslib/gen550.h>
  49 #include <syslib/ibm440gx_common.h>
  50
  51 extern bd_t __res;
  52
  53 static struct ibm44x_clocks clocks __initdata;
  54
  55 /*
  56  * Bamboo external IRQ triggering/polarity settings
  57  */
  58 unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
  59         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
  60         (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
  61         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
  62         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
  63         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
  64         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
  65         (IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
  66         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
  67         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
  68         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
  69 };
  70
  71 static void __init
  72 bamboo_calibrate_decr(void)
  73 {
  74         unsigned int freq;
  75
  76         if (mfspr(SPRN_CCR1) & CCR1_TCS)
  77                 freq = BAMBOO_TMRCLK;
  78         else
  79                 freq = clocks.cpu;
  80
  81         ibm44x_calibrate_decr(freq);
  82
  83 }
  84
  85 static int
  86 bamboo_show_cpuinfo(struct seq_file *m)
  87 {
  88         seq_printf(m, "vendor\t\t: IBM\n");
  89         seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
  90
  91         return 0;
  92 }
  93
  94 static inline int
  95 bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
  96 {
  97         static char pci_irq_table[][4] =
  98         /*
  99          *      PCI IDSEL/INTPIN->INTLINE
 100          *         A   B   C   D
 101          */
 102         {
 103                 { 28, 28, 28, 28 },     /* IDSEL 1 - PCI Slot 0 */
 104                 { 27, 27, 27, 27 },     /* IDSEL 2 - PCI Slot 1 */
 105                 { 26, 26, 26, 26 },     /* IDSEL 3 - PCI Slot 2 */
 106                 { 25, 25, 25, 25 },     /* IDSEL 4 - PCI Slot 3 */
 107         };
 108
 109         const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
 110         return PCI_IRQ_TABLE_LOOKUP;
 111 }
 112
 113 static void __init bamboo_set_emacdata(void)
 114 {
 115         u8 * base_addr;
 116         struct ocp_def *def;
 117         struct ocp_func_emac_data *emacdata;
 118         u8 val;
 119         int mode;
 120         u32 excluded = 0;
 121
 122         base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
 123         val = readb(base_addr);
 124         iounmap((void *) base_addr);
 125         if (BAMBOO_SEL_MII(val))
 126                 mode = PHY_MODE_MII;
 127         else if (BAMBOO_SEL_RMII(val))
 128                 mode = PHY_MODE_RMII;
 129         else
 130                 mode = PHY_MODE_SMII;
 131
 132         /*
 133          * SW2 on the Bamboo is used for ethernet configuration and is accessed
 134          * via the CONFIG2 register in the FPGA.  If the ANEG pin is set,
 135          * overwrite the supported features with the settings in SW2.
 136          *
 137          * This is used as a workaround for the improperly biased RJ-45 sockets
 138          * on the Rev. 0 Bamboo.  By default only 10baseT is functional.
 139          * Removing inductors L17 and L18 from the board allows 100baseT, but
 140          * disables 10baseT.  The Rev. 1 has no such limitations.
 141          */
 142
 143         base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8);
 144         val = readb(base_addr);
 145         iounmap((void *) base_addr);
 146         if (!BAMBOO_AUTONEGOTIATE(val)) {
 147                 excluded |= SUPPORTED_Autoneg;
 148                 if (BAMBOO_FORCE_100Mbps(val)) {
 149                         excluded |= SUPPORTED_10baseT_Full;
 150                         excluded |= SUPPORTED_10baseT_Half;
 151                         if (BAMBOO_FULL_DUPLEX_EN(val))
 152                                 excluded |= SUPPORTED_100baseT_Half;
 153                         else
 154                                 excluded |= SUPPORTED_100baseT_Full;
 155                 } else {
 156                         excluded |= SUPPORTED_100baseT_Full;
 157                         excluded |= SUPPORTED_100baseT_Half;
 158                         if (BAMBOO_FULL_DUPLEX_EN(val))
 159                                 excluded |= SUPPORTED_10baseT_Half;
 160                         else
 161                                 excluded |= SUPPORTED_10baseT_Full;
 162                 }
 163         }
 164
 165         /* Set mac_addr, phy mode and unsupported phy features for each EMAC */
 166
 167         def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
 168         emacdata = def->additions;
 169         memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
 170         emacdata->phy_mode = mode;
 171         emacdata->phy_feat_exc = excluded;
 172
 173         def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
 174         emacdata = def->additions;
 175         memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
 176         emacdata->phy_mode = mode;
 177         emacdata->phy_feat_exc = excluded;
 178 }
 179
 180 static int
 181 bamboo_exclude_device(unsigned char bus, unsigned char devfn)
 182 {
 183         return (bus == 0 && devfn == 0);
 184 }
 185
 186 #define PCI_READW(offset) \
 187         (readw((void *)((u32)pci_reg_base+offset)))
 188
 189 #define PCI_WRITEW(value, offset) \
 190         (writew(value, (void *)((u32)pci_reg_base+offset)))
 191
 192 #define PCI_WRITEL(value, offset) \
 193         (writel(value, (void *)((u32)pci_reg_base+offset)))
 194
 195 static void __init
 196 bamboo_setup_pci(void)
 197 {
 198         void *pci_reg_base;
 199         unsigned long memory_size;
 200         memory_size = ppc_md.find_end_of_memory();
 201
 202         pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
 203
 204         /* Enable PCI I/O, Mem, and Busmaster cycles */
 205         PCI_WRITEW(PCI_READW(PCI_COMMAND) |
 206                    PCI_COMMAND_MEMORY |
 207                    PCI_COMMAND_MASTER, PCI_COMMAND);
 208
 209         /* Disable region first */
 210         PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
 211
 212         /* PLB starting addr: 0x00000000A0000000 */
 213         PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
 214
 215         /* PCI start addr, 0xA0000000 (PCI Address) */
 216         PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
 217         PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
 218
 219         /* Enable no pre-fetch, enable region */
 220         PCI_WRITEL(((0xffffffff -
 221                      (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
 222                       BAMBOO_PCIL0_PMM0MA);
 223
 224         /* Disable region one */
 225         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
 226         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
 227         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
 228         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
 229         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
 230
 231         /* Disable region two */
 232         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
 233         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
 234         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
 235         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
 236         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
 237
 238         /* Now configure the PCI->PLB windows, we only use PTM1
 239          *
 240          * For Inbound flow, set the window size to all available memory
 241          * This is required because if size is smaller,
 242          * then Eth/PCI DD would fail as PCI card not able to access
 243          * the memory allocated by DD.
 244          */
 245
 246         PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);     /* disabled region 1 */
 247         PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);     /* begin of address map */
 248
 249         memory_size = 1 << fls(memory_size - 1);
 250
 251         /* Size low + Enabled */
 252         PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
 253
 254         eieio();
 255         iounmap(pci_reg_base);
 256 }
 257
 258 static void __init
 259 bamboo_setup_hose(void)
 260 {
 261         unsigned int bar_response, bar;
 262         struct pci_controller *hose;
 263
 264         bamboo_setup_pci();
 265
 266         hose = pcibios_alloc_controller();
 267
 268         if (!hose)
 269                 return;
 270
 271         hose->first_busno = 0;
 272         hose->last_busno = 0xff;
 273
 274         hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
 275
 276         pci_init_resource(&hose->io_resource,
 277                         BAMBOO_PCI_LOWER_IO,
 278                         BAMBOO_PCI_UPPER_IO,
 279                         IORESOURCE_IO,
 280                         "PCI host bridge");
 281
 282         pci_init_resource(&hose->mem_resources[0],
 283                         BAMBOO_PCI_LOWER_MEM,
 284                         BAMBOO_PCI_UPPER_MEM,
 285                         IORESOURCE_MEM,
 286                         "PCI host bridge");
 287
 288         ppc_md.pci_exclude_device = bamboo_exclude_device;
 289
 290         hose->io_space.start = BAMBOO_PCI_LOWER_IO;
 291         hose->io_space.end = BAMBOO_PCI_UPPER_IO;
 292         hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
 293         hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
 294         isa_io_base =
 295                 (unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
 296         hose->io_base_virt = (void *)isa_io_base;
 297
 298         setup_indirect_pci(hose,
 299                         BAMBOO_PCI_CFGA_PLB32,
 300                         BAMBOO_PCI_CFGD_PLB32);
 301         hose->set_cfg_type = 1;
 302
 303         /* Zero config bars */
 304         for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
 305                 early_write_config_dword(hose, hose->first_busno,
 306                                          PCI_FUNC(hose->first_busno), bar,
 307                                          0x00000000);
 308                 early_read_config_dword(hose, hose->first_busno,
 309                                         PCI_FUNC(hose->first_busno), bar,
 310                                         &bar_response);
 311         }
 312
 313         hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
 314
 315         ppc_md.pci_swizzle = common_swizzle;
 316         ppc_md.pci_map_irq = bamboo_map_irq;
 317 }
 318
 319 TODC_ALLOC();
 320
 321 static void __init
 322 bamboo_early_serial_map(void)
 323 {
 324         struct uart_port port;
 325
 326         /* Setup ioremapped serial port access */
 327         memset(&port, 0, sizeof(port));
 328         port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
 329         port.irq = 0;
 330         port.uartclk = clocks.uart0;
 331         port.regshift = 0;
 332         port.iotype = UPIO_MEM;
 333         port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 334         port.line = 0;
 335
 336         if (early_serial_setup(&port) != 0) {
 337                 printk("Early serial init of port 0 failed\n");
 338         }
 339
 340 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 341         /* Configure debug serial access */
 342         gen550_init(0, &port);
 343 #endif
 344
 345         port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
 346         port.irq = 1;
 347         port.uartclk = clocks.uart1;
 348         port.line = 1;
 349
 350         if (early_serial_setup(&port) != 0) {
 351                 printk("Early serial init of port 1 failed\n");
 352         }
 353
 354 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 355         /* Configure debug serial access */
 356         gen550_init(1, &port);
 357 #endif
 358
 359         port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
 360         port.irq = 3;
 361         port.uartclk = clocks.uart2;
 362         port.line = 2;
 363
 364         if (early_serial_setup(&port) != 0) {
 365                 printk("Early serial init of port 2 failed\n");
 366         }
 367
 368 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 369         /* Configure debug serial access */
 370         gen550_init(2, &port);
 371 #endif
 372
 373         port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
 374         port.irq = 4;
 375         port.uartclk = clocks.uart3;
 376         port.line = 3;
 377
 378         if (early_serial_setup(&port) != 0) {
 379                 printk("Early serial init of port 3 failed\n");
 380         }
 381 }
 382
 383 static void __init
 384 bamboo_setup_arch(void)
 385 {
 386
 387         bamboo_set_emacdata();
 388
 389         ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
 390         ocp_sys_info.opb_bus_freq = clocks.opb;
 391
 392         /* Setup TODC access */
 393         TODC_INIT(TODC_TYPE_DS1743,
 394                         0,
 395                         0,
 396                         ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
 397                         8);
 398
 399         /* init to some ~sane value until calibrate_delay() runs */
 400         loops_per_jiffy = 50000000/HZ;
 401
 402         /* Setup PCI host bridge */
 403         bamboo_setup_hose();
 404
 405 #ifdef CONFIG_BLK_DEV_INITRD
 406         if (initrd_start)
 407                 ROOT_DEV = Root_RAM0;
 408         else
 409 #endif
 410 #ifdef CONFIG_ROOT_NFS
 411                 ROOT_DEV = Root_NFS;
 412 #else
 413                 ROOT_DEV = Root_HDA1;
 414 #endif
 415
 416         bamboo_early_serial_map();
 417
 418         /* Identify the system */
 419         printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
 420 }
 421
 422 void __init platform_init(unsigned long r3, unsigned long r4,
 423                 unsigned long r5, unsigned long r6, unsigned long r7)
 424 {
 425         ibm44x_platform_init(r3, r4, r5, r6, r7);
 426
 427         ppc_md.setup_arch = bamboo_setup_arch;
 428         ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
 429         ppc_md.get_irq = NULL;          /* Set in ppc4xx_pic_init() */
 430
 431         ppc_md.calibrate_decr = bamboo_calibrate_decr;
 432         ppc_md.time_init = todc_time_init;
 433         ppc_md.set_rtc_time = todc_set_rtc_time;
 434         ppc_md.get_rtc_time = todc_get_rtc_time;
 435
 436         ppc_md.nvram_read_val = todc_direct_read_val;
 437         ppc_md.nvram_write_val = todc_direct_write_val;
 438 #ifdef CONFIG_KGDB
 439         ppc_md.early_serial_map = bamboo_early_serial_map;
 440 #endif
 441 }
 442