arch/ppc/platforms/pal4_setup.c

   1 /*
   2  * Board setup routines for the SBS PalomarIV.
   3  *
   4  * Author: Dan Cox
   5  *
   6  * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
   7  * the terms of the GNU General Public License version 2.  This program
   8  * is licensed "as is" without any warranty of any kind, whether express
   9  * or implied.
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/init.h>
  14 #include <linux/types.h>
  15 #include <linux/errno.h>
  16 #include <linux/reboot.h>
  17 #include <linux/time.h>
  18 #include <linux/irq.h>
  19 #include <linux/kdev_t.h>
  20 #include <linux/initrd.h>
  21 #include <linux/console.h>
  22 #include <linux/seq_file.h>
  23 #include <linux/root_dev.h>
  24
  25 #include <asm/io.h>
  26 #include <asm/todc.h>
  27 #include <asm/bootinfo.h>
  28 #include <asm/machdep.h>
  29
  30 #include <syslib/cpc700.h>
  31
  32 #include "pal4.h"
  33
  34 extern void pal4_find_bridges(void);
  35
  36 unsigned int cpc700_irq_assigns[][2] = {
  37         {1, 1},    /* IRQ 0: ECC correctable error */
  38         {1, 1},    /* IRQ 1: PCI write to memory range */
  39         {0, 1},    /* IRQ 2: PCI write to command register */
  40         {0, 1},    /* IRQ 3: UART 0 */
  41         {0, 1},    /* IRQ 4: UART 1 */
  42         {0, 1},    /* IRQ 5: ICC 0 */
  43         {0, 1},    /* IRQ 6: ICC 1 */
  44         {0, 1},    /* IRQ 7: GPT compare 0 */
  45         {0, 1},    /* IRQ 8: GPT compare 1 */
  46         {0, 1},    /* IRQ 9: GPT compare 2 */
  47         {0, 1},    /* IRQ 10: GPT compare 3 */
  48         {0, 1},    /* IRQ 11: GPT compare 4 */
  49         {0, 1},    /* IRQ 12: GPT capture 0 */
  50         {0, 1},    /* IRQ 13: GPT capture 1 */
  51         {0, 1},    /* IRQ 14: GPT capture 2 */
  52         {0, 1},    /* IRQ 15: GPT capture 3 */
  53         {0, 1},    /* IRQ 16: GPT capture 4 */
  54         {0, 0},    /* IRQ 17: reserved */
  55         {0, 0},    /* IRQ 18: reserved */
  56         {0, 0},    /* IRQ 19: reserved */
  57         {0, 0},    /* IRQ 20: reserved */
  58         {0, 1},    /* IRQ 21: Ethernet */
  59         {0, 0},    /* IRQ 22: reserved */
  60         {0, 0},    /* IRQ 23: reserved */
  61         {0, 0},    /* IRQ 24: resreved */
  62         {0, 0},    /* IRQ 25: reserved */
  63         {0, 0},    /* IRQ 26: reserved */
  64         {0, 0},    /* IRQ 27: reserved */
  65         {0, 0},    /* IRQ 28: reserved */
  66         {0, 0},    /* IRQ 29: reserved */
  67         {0, 0},    /* IRQ 30: reserved */
  68         {0, 0},    /* IRQ 31: reserved */
  69 };
  70
  71 static int
  72 pal4_show_cpuinfo(struct seq_file *m)
  73 {
  74         seq_printf(m, "board\t\t: SBS Palomar IV\n");
  75
  76         return 0;
  77 }
  78
  79 static void
  80 pal4_restart(char *cmd)
  81 {
  82         local_irq_disable();
  83         __asm__ __volatile__("lis  3,0xfff0\n \
  84                               ori  3,3,0x100\n \
  85                               mtspr 26,3\n \
  86                               li   3,0\n \
  87                               mtspr 27,3\n \
  88                               rfi");
  89
  90         for(;;);
  91 }
  92
  93 static void
  94 pal4_power_off(void)
  95 {
  96         local_irq_disable();
  97         for(;;);
  98 }
  99
 100 static void
 101 pal4_halt(void)
 102 {
 103         pal4_power_off();
 104 }
 105
 106 TODC_ALLOC();
 107
 108 static void __init
 109 pal4_setup_arch(void)
 110 {
 111         unsigned long l2;
 112
 113         TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
 114                   ioremap(PAL4_NVRAM, PAL4_NVRAM_SIZE), 8);
 115
 116         pal4_find_bridges();
 117
 118 #ifdef CONFIG_BLK_DEV_INITRD
 119         if (initrd_start)
 120                 ROOT_DEV = Root_RAM0;
 121         else
 122 #endif
 123                 ROOT_DEV = Root_NFS;
 124
 125         /* The L2 gets disabled in the bootloader, but all the proper
 126            bits should be present from the fw, so just re-enable it */
 127         l2 = _get_L2CR();
 128         if (!(l2 & L2CR_L2E)) {
 129                 /* presume that it was initially set if the size is
 130                    still present. */
 131                 if (l2 ^ L2CR_L2SIZ_MASK)
 132                         _set_L2CR(l2 | L2CR_L2E);
 133                 else
 134                         printk("L2 not set by firmware; left disabled.\n");
 135         }
 136 }
 137
 138 static void __init
 139 pal4_map_io(void)
 140 {
 141         io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
 142 }
 143
 144 void __init
 145 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 146               unsigned long r6, unsigned long r7)
 147 {
 148         parse_bootinfo(find_bootinfo());
 149
 150         isa_io_base = 0 /*PAL4_ISA_IO_BASE*/;
 151         pci_dram_offset = 0 /*PAL4_PCI_SYS_MEM_BASE*/;
 152
 153         ppc_md.setup_arch = pal4_setup_arch;
 154         ppc_md.show_cpuinfo = pal4_show_cpuinfo;
 155
 156         ppc_md.setup_io_mappings = pal4_map_io;
 157
 158         ppc_md.init_IRQ = cpc700_init_IRQ;
 159         ppc_md.get_irq = cpc700_get_irq;
 160
 161         ppc_md.restart = pal4_restart;
 162         ppc_md.halt = pal4_halt;
 163         ppc_md.power_off = pal4_power_off;
 164
 165         ppc_md.time_init = todc_time_init;
 166         ppc_md.set_rtc_time = todc_set_rtc_time;
 167         ppc_md.get_rtc_time = todc_get_rtc_time;
 168         ppc_md.calibrate_decr = todc_calibrate_decr;
 169
 170         ppc_md.nvram_read_val = todc_direct_read_val;
 171         ppc_md.nvram_write_val = todc_direct_write_val;
 172 }
 173