drivers/ide/pci/tc86c001.c

   1 /*
   2  * Copyright (C) 2002 Toshiba Corporation
   3  * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
   4  *
   5  * This file is licensed under the terms of the GNU General Public
   6  * License version 2.  This program is licensed "as is" without any
   7  * warranty of any kind, whether express or implied.
   8  */
   9
  10 #include <linux/types.h>
  11 #include <linux/pci.h>
  12 #include <linux/ide.h>
  13
  14 static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
  15 {
  16         ide_hwif_t *hwif        = HWIF(drive);
  17         unsigned long scr_port  = hwif->config_data + (drive->dn ? 0x02 : 0x00);
  18         u16 mode, scr           = inw(scr_port);
  19
  20         switch (speed) {
  21         case XFER_UDMA_4:       mode = 0x00c0; break;
  22         case XFER_UDMA_3:       mode = 0x00b0; break;
  23         case XFER_UDMA_2:       mode = 0x00a0; break;
  24         case XFER_UDMA_1:       mode = 0x0090; break;
  25         case XFER_UDMA_0:       mode = 0x0080; break;
  26         case XFER_MW_DMA_2:     mode = 0x0070; break;
  27         case XFER_MW_DMA_1:     mode = 0x0060; break;
  28         case XFER_MW_DMA_0:     mode = 0x0050; break;
  29         case XFER_PIO_4:        mode = 0x0400; break;
  30         case XFER_PIO_3:        mode = 0x0300; break;
  31         case XFER_PIO_2:        mode = 0x0200; break;
  32         case XFER_PIO_1:        mode = 0x0100; break;
  33         case XFER_PIO_0:
  34         default:                mode = 0x0000; break;
  35         }
  36
  37         scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
  38         scr |= mode;
  39         outw(scr, scr_port);
  40 }
  41
  42 static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
  43 {
  44         tc86c001_set_mode(drive, XFER_PIO_0 + pio);
  45 }
  46
  47 /*
  48  * HACKITY HACK
  49  *
  50  * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
  51  * if a DMA transfer terminates prematurely, the controller leaves the device's
  52  * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
  53  * set the interrupt bit in the DMA status register), thus no PCI interrupt
  54  * will occur until a DMA transfer has been successfully completed.
  55  *
  56  * We work around this by initiating dummy, zero-length DMA transfer on
  57  * a DMA timeout expiration. I found no better way to do this with the current
  58  * IDE core than to temporarily replace a higher level driver's timer expiry
  59  * handler with our own backing up to that handler in case our recovery fails.
  60  */
  61 static int tc86c001_timer_expiry(ide_drive_t *drive)
  62 {
  63         ide_hwif_t *hwif        = HWIF(drive);
  64         ide_expiry_t *expiry    = ide_get_hwifdata(hwif);
  65         ide_hwgroup_t *hwgroup  = HWGROUP(drive);
  66         u8 dma_stat             = inb(hwif->dma_status);
  67
  68         /* Restore a higher level driver's expiry handler first. */
  69         hwgroup->expiry = expiry;
  70
  71         if ((dma_stat & 5) == 1) {      /* DMA active and no interrupt */
  72                 unsigned long sc_base   = hwif->config_data;
  73                 unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
  74                 u8 dma_cmd              = inb(hwif->dma_command);
  75
  76                 printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
  77                        "attempting recovery...\n", drive->name);
  78
  79                 /* Stop DMA */
  80                 outb(dma_cmd & ~0x01, hwif->dma_command);
  81
  82                 /* Setup the dummy DMA transfer */
  83                 outw(0, sc_base + 0x0a);        /* Sector Count */
  84                 outw(0, twcr_port);     /* Transfer Word Count 1 or 2 */
  85
  86                 /* Start the dummy DMA transfer */
  87                 outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
  88                 outb(0x01, hwif->dma_command); /* set START_STOPBM */
  89
  90                 /*
  91                  * If an interrupt was pending, it should come thru shortly.
  92                  * If not, a higher level driver's expiry handler should
  93                  * eventually cause some kind of recovery from the DMA stall.
  94                  */
  95                 return WAIT_MIN_SLEEP;
  96         }
  97
  98         /* Chain to the restored expiry handler if DMA wasn't active. */
  99         if (likely(expiry != NULL))
 100                 return expiry(drive);
 101
 102         /* If there was no handler, "emulate" that for ide_timer_expiry()... */
 103         return -1;
 104 }
 105
 106 static void tc86c001_dma_start(ide_drive_t *drive)
 107 {
 108         ide_hwif_t *hwif        = HWIF(drive);
 109         ide_hwgroup_t *hwgroup  = HWGROUP(drive);
 110         unsigned long sc_base   = hwif->config_data;
 111         unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
 112         unsigned long nsectors  = hwgroup->rq->nr_sectors;
 113
 114         /*
 115          * We have to manually load the sector count and size into
 116          * the appropriate system control registers for DMA to work
 117          * with LBA48 and ATAPI devices...
 118          */
 119         outw(nsectors, sc_base + 0x0a); /* Sector Count */
 120         outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
 121
 122         /* Install our timeout expiry hook, saving the current handler... */
 123         ide_set_hwifdata(hwif, hwgroup->expiry);
 124         hwgroup->expiry = &tc86c001_timer_expiry;
 125
 126         ide_dma_start(drive);
 127 }
 128
 129 static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
 130 {
 131         struct pci_dev *dev = to_pci_dev(hwif->dev);
 132         unsigned long sc_base = pci_resource_start(dev, 5);
 133         u16 scr1 = inw(sc_base + 0x00);
 134
 135         /*
 136          * System Control  1 Register bit 13 (PDIAGN):
 137          * 0=80-pin cable, 1=40-pin cable
 138          */
 139         return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 140 }
 141
 142 static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
 143 {
 144         struct pci_dev *dev     = to_pci_dev(hwif->dev);
 145         unsigned long sc_base   = pci_resource_start(dev, 5);
 146         u16 scr1                = inw(sc_base + 0x00);
 147
 148         /* System Control 1 Register bit 15 (Soft Reset) set */
 149         outw(scr1 |  0x8000, sc_base + 0x00);
 150
 151         /* System Control 1 Register bit 14 (FIFO Reset) set */
 152         outw(scr1 |  0x4000, sc_base + 0x00);
 153
 154         /* System Control 1 Register: reset clear */
 155         outw(scr1 & ~0xc000, sc_base + 0x00);
 156
 157         /* Store the system control register base for convenience... */
 158         hwif->config_data = sc_base;
 159
 160         if (!hwif->dma_base)
 161                 return;
 162
 163         /*
 164          * Sector Count Control Register bits 0 and 1 set:
 165          * software sets Sector Count Register for master and slave device
 166          */
 167         outw(0x0003, sc_base + 0x0c);
 168
 169         /* Sector Count Register limit */
 170         hwif->rqsize     = 0xffff;
 171 }
 172
 173 static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
 174                                                         const char *name)
 175 {
 176         int err = pci_request_region(dev, 5, name);
 177
 178         if (err)
 179                 printk(KERN_ERR "%s: system control regs already in use", name);
 180         return err;
 181 }
 182
 183 static const struct ide_port_ops tc86c001_port_ops = {
 184         .set_pio_mode           = tc86c001_set_pio_mode,
 185         .set_dma_mode           = tc86c001_set_mode,
 186         .cable_detect           = tc86c001_cable_detect,
 187 };
 188
 189 static const struct ide_dma_ops tc86c001_dma_ops = {
 190         .dma_host_set           = ide_dma_host_set,
 191         .dma_setup              = ide_dma_setup,
 192         .dma_exec_cmd           = ide_dma_exec_cmd,
 193         .dma_start              = tc86c001_dma_start,
 194         .dma_end                = __ide_dma_end,
 195         .dma_test_irq           = ide_dma_test_irq,
 196         .dma_lost_irq           = ide_dma_lost_irq,
 197         .dma_timeout            = ide_dma_timeout,
 198 };
 199
 200 static const struct ide_port_info tc86c001_chipset __devinitdata = {
 201         .name           = "TC86C001",
 202         .init_chipset   = init_chipset_tc86c001,
 203         .init_hwif      = init_hwif_tc86c001,
 204         .port_ops       = &tc86c001_port_ops,
 205         .dma_ops        = &tc86c001_dma_ops,
 206         .host_flags     = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
 207                           IDE_HFLAG_ABUSE_SET_DMA_MODE,
 208         .pio_mask       = ATA_PIO4,
 209         .mwdma_mask     = ATA_MWDMA2,
 210         .udma_mask      = ATA_UDMA4,
 211 };
 212
 213 static int __devinit tc86c001_init_one(struct pci_dev *dev,
 214                                        const struct pci_device_id *id)
 215 {
 216         return ide_setup_pci_device(dev, &tc86c001_chipset);
 217 }
 218
 219 static const struct pci_device_id tc86c001_pci_tbl[] = {
 220         { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
 221         { 0, }
 222 };
 223 MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
 224
 225 static struct pci_driver driver = {
 226         .name           = "TC86C001",
 227         .id_table       = tc86c001_pci_tbl,
 228         .probe          = tc86c001_init_one
 229 };
 230
 231 static int __init tc86c001_ide_init(void)
 232 {
 233         return ide_pci_register_driver(&driver);
 234 }
 235 module_init(tc86c001_ide_init);
 236
 237 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 238 MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
 239 MODULE_LICENSE("GPL");