drivers/ide/ppc/mpc8xx.c

   1 /*
   2  *  Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de
   3  *  Modified for direct IDE interface
   4  *      by Thomas Lange, thomas@corelatus.com
   5  *  Modified for direct IDE interface on 8xx without using the PCMCIA
   6  *  controller
   7  *      by Steven.Scholz@imc-berlin.de
   8  *  Moved out of arch/ppc/kernel/m8xx_setup.c, other minor cleanups
   9  *      by Mathew Locke <mattl@mvista.com>
  10  */
  11
  12 #include <linux/errno.h>
  13 #include <linux/kernel.h>
  14 #include <linux/mm.h>
  15 #include <linux/stddef.h>
  16 #include <linux/unistd.h>
  17 #include <linux/ptrace.h>
  18 #include <linux/slab.h>
  19 #include <linux/user.h>
  20 #include <linux/tty.h>
  21 #include <linux/major.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/reboot.h>
  24 #include <linux/init.h>
  25 #include <linux/ioport.h>
  26 #include <linux/ide.h>
  27 #include <linux/bootmem.h>
  28
  29 #include <asm/mpc8xx.h>
  30 #include <asm/mmu.h>
  31 #include <asm/processor.h>
  32 #include <asm/io.h>
  33 #include <asm/pgtable.h>
  34 #include <asm/ide.h>
  35 #include <asm/8xx_immap.h>
  36 #include <asm/machdep.h>
  37 #include <asm/irq.h>
  38
  39 #define DRV_NAME "ide-mpc8xx"
  40
  41 static int identify  (volatile u8 *p);
  42 static void print_fixed (volatile u8 *p);
  43 static void print_funcid (int func);
  44 static int check_ide_device (unsigned long base);
  45
  46 static void ide_interrupt_ack (void *dev);
  47 static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio);
  48
  49 typedef struct ide_ioport_desc {
  50         unsigned long   base_off;               /* Offset to PCMCIA memory      */
  51         unsigned long   reg_off[IDE_NR_PORTS];  /* controller register offsets  */
  52         int             irq;                    /* IRQ                          */
  53 } ide_ioport_desc_t;
  54
  55 ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = {
  56 #ifdef IDE0_BASE_OFFSET
  57         { IDE0_BASE_OFFSET,
  58             {
  59                 IDE0_DATA_REG_OFFSET,
  60                 IDE0_ERROR_REG_OFFSET,
  61                 IDE0_NSECTOR_REG_OFFSET,
  62                 IDE0_SECTOR_REG_OFFSET,
  63                 IDE0_LCYL_REG_OFFSET,
  64                 IDE0_HCYL_REG_OFFSET,
  65                 IDE0_SELECT_REG_OFFSET,
  66                 IDE0_STATUS_REG_OFFSET,
  67                 IDE0_CONTROL_REG_OFFSET,
  68                 IDE0_IRQ_REG_OFFSET,
  69             },
  70             IDE0_INTERRUPT,
  71         },
  72 #ifdef IDE1_BASE_OFFSET
  73         { IDE1_BASE_OFFSET,
  74             {
  75                 IDE1_DATA_REG_OFFSET,
  76                 IDE1_ERROR_REG_OFFSET,
  77                 IDE1_NSECTOR_REG_OFFSET,
  78                 IDE1_SECTOR_REG_OFFSET,
  79                 IDE1_LCYL_REG_OFFSET,
  80                 IDE1_HCYL_REG_OFFSET,
  81                 IDE1_SELECT_REG_OFFSET,
  82                 IDE1_STATUS_REG_OFFSET,
  83                 IDE1_CONTROL_REG_OFFSET,
  84                 IDE1_IRQ_REG_OFFSET,
  85             },
  86             IDE1_INTERRUPT,
  87         },
  88 #endif /* IDE1_BASE_OFFSET */
  89 #endif  /* IDE0_BASE_OFFSET */
  90 };
  91
  92 ide_pio_timings_t ide_pio_clocks[6];
  93 int hold_time[6] =  {30, 20, 15, 10, 10, 10 };   /* PIO Mode 5 with IORDY (nonstandard) */
  94
  95 /*
  96  * Warning: only 1 (ONE) PCMCIA slot supported here,
  97  * which must be correctly initialized by the firmware (PPCBoot).
  98  */
  99 static int _slot_ = -1;                 /* will be read from PCMCIA registers   */
 100
 101 /* Make clock cycles and always round up */
 102 #define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U )
 103
 104 #define M8XX_PCMCIA_CD2(slot)      (0x10000000 >> (slot << 4))
 105 #define M8XX_PCMCIA_CD1(slot)      (0x08000000 >> (slot << 4))
 106
 107 /*
 108  * The TQM850L hardware has two pins swapped! Grrrrgh!
 109  */
 110 #ifdef  CONFIG_TQM850L
 111 #define __MY_PCMCIA_GCRX_CXRESET        PCMCIA_GCRX_CXOE
 112 #define __MY_PCMCIA_GCRX_CXOE           PCMCIA_GCRX_CXRESET
 113 #else
 114 #define __MY_PCMCIA_GCRX_CXRESET        PCMCIA_GCRX_CXRESET
 115 #define __MY_PCMCIA_GCRX_CXOE           PCMCIA_GCRX_CXOE
 116 #endif
 117
 118 #if defined(CONFIG_BLK_DEV_MPC8xx_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
 119 #define PCMCIA_SCHLVL IDE0_INTERRUPT    /* Status Change Interrupt Level        */
 120 static int pcmcia_schlvl = PCMCIA_SCHLVL;
 121 #endif
 122
 123 /*
 124  * See include/linux/ide.h for definition of hw_regs_t (p, base)
 125  */
 126
 127 /*
 128  * m8xx_ide_init_ports() for a direct IDE interface _using_
 129  * MPC8xx's internal PCMCIA interface
 130  */
 131 #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
 132 static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
 133 {
 134         unsigned long *p = hw->io_ports_array;
 135         int i;
 136
 137         typedef struct {
 138                 ulong br;
 139                 ulong or;
 140         } pcmcia_win_t;
 141         volatile pcmcia_win_t *win;
 142         volatile pcmconf8xx_t *pcmp;
 143
 144         uint *pgcrx;
 145         u32 pcmcia_phy_base;
 146         u32 pcmcia_phy_end;
 147         static unsigned long pcmcia_base = 0;
 148         unsigned long base;
 149
 150         *p = 0;
 151
 152         pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
 153
 154         if (!pcmcia_base) {
 155                 /*
 156                  * Read out PCMCIA registers. Since the reset values
 157                  * are undefined, we sure hope that they have been
 158                  * set up by firmware
 159                  */
 160
 161                 /* Scan all registers for valid settings */
 162                 pcmcia_phy_base = 0xFFFFFFFF;
 163                 pcmcia_phy_end = 0;
 164                 /* br0 is start of brX and orX regs */
 165                 win = (pcmcia_win_t *) \
 166                         (&(((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0));
 167                 for (i = 0; i < 8; i++) {
 168                         if (win->or & 1) {      /* This bank is marked as valid */
 169                                 if (win->br < pcmcia_phy_base) {
 170                                         pcmcia_phy_base = win->br;
 171                                 }
 172                                 if ((win->br + PCMCIA_MEM_SIZE) > pcmcia_phy_end) {
 173                                         pcmcia_phy_end  = win->br + PCMCIA_MEM_SIZE;
 174                                 }
 175                                 /* Check which slot that has been defined */
 176                                 _slot_ = (win->or >> 2) & 1;
 177
 178                         }                                       /* Valid bank */
 179                         win++;
 180                 }                                               /* for */
 181
 182                 printk ("PCMCIA slot %c: phys mem %08x...%08x (size %08x)\n",
 183                         'A' + _slot_,
 184                         pcmcia_phy_base, pcmcia_phy_end,
 185                         pcmcia_phy_end - pcmcia_phy_base);
 186
 187                 if (!request_mem_region(pcmcia_phy_base,
 188                                         pcmcia_phy_end - pcmcia_phy_base,
 189                                         DRV_NAME)) {
 190                         printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
 191                         return -EBUSY;
 192                 }
 193
 194                 pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base,
 195                                                    pcmcia_phy_end-pcmcia_phy_base);
 196
 197 #ifdef DEBUG
 198                 printk ("PCMCIA virt base: %08lx\n", pcmcia_base);
 199 #endif
 200                 /* Compute clock cycles for PIO timings */
 201                 for (i=0; i<6; ++i) {
 202                         bd_t    *binfo = (bd_t *)__res;
 203
 204                         hold_time[i]   =
 205                                 PCMCIA_MK_CLKS (hold_time[i],
 206                                                 binfo->bi_busfreq);
 207                         ide_pio_clocks[i].setup_time  =
 208                                 PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time,
 209                                                 binfo->bi_busfreq);
 210                         ide_pio_clocks[i].active_time =
 211                                 PCMCIA_MK_CLKS (ide_pio_timings[i].active_time,
 212                                                 binfo->bi_busfreq);
 213                         ide_pio_clocks[i].cycle_time  =
 214                                 PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time,
 215                                                 binfo->bi_busfreq);
 216 #if 0
 217                         printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n",
 218                                 i,
 219                                 ide_pio_clocks[i].setup_time,
 220                                 ide_pio_clocks[i].active_time,
 221                                 ide_pio_clocks[i].hold_time,
 222                                 ide_pio_clocks[i].cycle_time,
 223                                 ide_pio_timings[i].setup_time,
 224                                 ide_pio_timings[i].active_time,
 225                                 ide_pio_timings[i].hold_time,
 226                                 ide_pio_timings[i].cycle_time);
 227 #endif
 228                 }
 229         }
 230
 231         if (_slot_ == -1) {
 232                 printk ("PCMCIA slot has not been defined! Using A as default\n");
 233                 _slot_ = 0;
 234         }
 235
 236 #ifdef CONFIG_IDE_8xx_PCCARD
 237
 238 #ifdef DEBUG
 239         printk ("PIPR = 0x%08X  slot %c ==> mask = 0x%X\n",
 240                 pcmp->pcmc_pipr,
 241                 'A' + _slot_,
 242                 M8XX_PCMCIA_CD1(_slot_) | M8XX_PCMCIA_CD2(_slot_) );
 243 #endif /* DEBUG */
 244
 245         if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) {
 246                 printk ("No card in slot %c: PIPR=%08x\n",
 247                         'A' + _slot_, (u32) pcmp->pcmc_pipr);
 248                 return -ENODEV;         /* No card in slot */
 249         }
 250
 251         check_ide_device (pcmcia_base);
 252
 253 #endif  /* CONFIG_IDE_8xx_PCCARD */
 254
 255         base = pcmcia_base + ioport_dsc[data_port].base_off;
 256 #ifdef DEBUG
 257         printk ("base: %08x + %08x = %08x\n",
 258                         pcmcia_base, ioport_dsc[data_port].base_off, base);
 259 #endif
 260
 261         for (i = 0; i < IDE_NR_PORTS; ++i) {
 262 #ifdef DEBUG
 263                 printk ("port[%d]: %08x + %08x = %08x\n",
 264                         i,
 265                         base,
 266                         ioport_dsc[data_port].reg_off[i],
 267                         i, base + ioport_dsc[data_port].reg_off[i]);
 268 #endif
 269                 *p++ = base + ioport_dsc[data_port].reg_off[i];
 270         }
 271
 272         hw->irq = ioport_dsc[data_port].irq;
 273         hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
 274
 275 #ifdef CONFIG_IDE_8xx_PCCARD
 276         {
 277                 unsigned int reg;
 278
 279                 if (_slot_)
 280                         pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb;
 281                 else
 282                         pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcra;
 283
 284                 reg = *pgcrx;
 285                 reg |= mk_int_int_mask (pcmcia_schlvl) << 24;
 286                 reg |= mk_int_int_mask (pcmcia_schlvl) << 16;
 287                 *pgcrx = reg;
 288         }
 289 #endif  /* CONFIG_IDE_8xx_PCCARD */
 290
 291         /* Enable Harddisk Interrupt,
 292          * and make it edge sensitive
 293          */
 294         /* (11-18) Set edge detect for irq, no wakeup from low power mode */
 295         ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
 296                                         (0x80000000 >> ioport_dsc[data_port].irq);
 297
 298 #ifdef CONFIG_IDE_8xx_PCCARD
 299         /* Make sure we don't get garbage irq */
 300         ((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF;
 301
 302         /* Enable falling edge irq */
 303         pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
 304 #endif  /* CONFIG_IDE_8xx_PCCARD */
 305
 306         return 0;
 307 }
 308 #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
 309
 310 /*
 311  * m8xx_ide_init_ports() for a direct IDE interface _not_ using
 312  * MPC8xx's internal PCMCIA interface
 313  */
 314 #if defined(CONFIG_IDE_EXT_DIRECT)
 315 static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
 316 {
 317         unsigned long *p = hw->io_ports_array;
 318         int i;
 319
 320         u32 ide_phy_base;
 321         u32 ide_phy_end;
 322         static unsigned long ide_base = 0;
 323         unsigned long base;
 324
 325         *p = 0;
 326
 327         if (!ide_base) {
 328
 329                 /* TODO:
 330                  * - add code to read ORx, BRx
 331                  */
 332                 ide_phy_base = CFG_ATA_BASE_ADDR;
 333                 ide_phy_end  = CFG_ATA_BASE_ADDR + 0x200;
 334
 335                 printk ("IDE phys mem : %08x...%08x (size %08x)\n",
 336                         ide_phy_base, ide_phy_end,
 337                         ide_phy_end - ide_phy_base);
 338
 339                 if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) {
 340                         printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
 341                         return -EBUSY;
 342                 }
 343
 344                 ide_base=(unsigned long)ioremap(ide_phy_base,
 345                                                 ide_phy_end-ide_phy_base);
 346
 347 #ifdef DEBUG
 348                 printk ("IDE virt base: %08lx\n", ide_base);
 349 #endif
 350         }
 351
 352         base = ide_base + ioport_dsc[data_port].base_off;
 353 #ifdef DEBUG
 354         printk ("base: %08x + %08x = %08x\n",
 355                 ide_base, ioport_dsc[data_port].base_off, base);
 356 #endif
 357
 358         for (i = 0; i < IDE_NR_PORTS; ++i) {
 359 #ifdef DEBUG
 360                 printk ("port[%d]: %08x + %08x = %08x\n",
 361                         i,
 362                         base,
 363                         ioport_dsc[data_port].reg_off[i],
 364                         i, base + ioport_dsc[data_port].reg_off[i]);
 365 #endif
 366                 *p++ = base + ioport_dsc[data_port].reg_off[i];
 367         }
 368
 369         /* direct connected IDE drive, i.e. external IRQ */
 370         hw->irq = ioport_dsc[data_port].irq;
 371         hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
 372
 373         /* Enable Harddisk Interrupt,
 374          * and make it edge sensitive
 375          */
 376         /* (11-18) Set edge detect for irq, no wakeup from low power mode */
 377         ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
 378                         (0x80000000 >> ioport_dsc[data_port].irq);
 379
 380         return 0;
 381 }
 382 #endif  /* CONFIG_IDE_8xx_DIRECT */
 383
 384
 385 /* -------------------------------------------------------------------- */
 386
 387
 388 /* PCMCIA Timing */
 389 #ifndef PCMCIA_SHT
 390 #define PCMCIA_SHT(t)   ((t & 0x0F)<<16)        /* Strobe Hold  Time    */
 391 #define PCMCIA_SST(t)   ((t & 0x0F)<<12)        /* Strobe Setup Time    */
 392 #define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length   */
 393 #endif
 394
 395 /* Calculate PIO timings */
 396 static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 397 {
 398 #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
 399         volatile pcmconf8xx_t   *pcmp;
 400         ulong timing, mask, reg;
 401
 402         pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
 403
 404         mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF));
 405
 406         timing  = PCMCIA_SHT(hold_time[pio]  )
 407                 | PCMCIA_SST(ide_pio_clocks[pio].setup_time )
 408                 | PCMCIA_SL (ide_pio_clocks[pio].active_time)
 409                 ;
 410
 411 #if 1
 412         printk ("Setting timing bits 0x%08lx in PCMCIA controller\n", timing);
 413 #endif
 414         if ((reg = pcmp->pcmc_por0 & mask) != 0)
 415                 pcmp->pcmc_por0 = reg | timing;
 416
 417         if ((reg = pcmp->pcmc_por1 & mask) != 0)
 418                 pcmp->pcmc_por1 = reg | timing;
 419
 420         if ((reg = pcmp->pcmc_por2 & mask) != 0)
 421                 pcmp->pcmc_por2 = reg | timing;
 422
 423         if ((reg = pcmp->pcmc_por3 & mask) != 0)
 424                 pcmp->pcmc_por3 = reg | timing;
 425
 426         if ((reg = pcmp->pcmc_por4 & mask) != 0)
 427                 pcmp->pcmc_por4 = reg | timing;
 428
 429         if ((reg = pcmp->pcmc_por5 & mask) != 0)
 430                 pcmp->pcmc_por5 = reg | timing;
 431
 432         if ((reg = pcmp->pcmc_por6 & mask) != 0)
 433                 pcmp->pcmc_por6 = reg | timing;
 434
 435         if ((reg = pcmp->pcmc_por7 & mask) != 0)
 436                 pcmp->pcmc_por7 = reg | timing;
 437
 438 #elif defined(CONFIG_IDE_EXT_DIRECT)
 439
 440         printk("%s[%d] %s: not implemented yet!\n",
 441                 __FILE__, __LINE__, __func__);
 442 #endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */
 443 }
 444
 445 static const struct ide_port_ops m8xx_port_ops = {
 446         .set_pio_mode           = m8xx_ide_set_pio_mode,
 447 };
 448
 449 static void
 450 ide_interrupt_ack (void *dev)
 451 {
 452 #ifdef CONFIG_IDE_8xx_PCCARD
 453         u_int pscr, pipr;
 454
 455 #if (PCMCIA_SOCKETS_NO == 2)
 456         u_int _slot_;
 457 #endif
 458
 459         /* get interrupt sources */
 460
 461         pscr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr;
 462         pipr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr;
 463
 464         /*
 465          * report only if both card detect signals are the same
 466          * not too nice done,
 467          * we depend on that CD2 is the bit to the left of CD1...
 468          */
 469
 470         if(_slot_==-1){
 471           printk("PCMCIA slot has not been defined! Using A as default\n");
 472           _slot_=0;
 473         }
 474
 475         if(((pipr & M8XX_PCMCIA_CD2(_slot_)) >> 1) ^
 476            (pipr & M8XX_PCMCIA_CD1(_slot_))         ) {
 477           printk ("card detect interrupt\n");
 478         }
 479         /* clear the interrupt sources */
 480         ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr = pscr;
 481
 482 #else /* ! CONFIG_IDE_8xx_PCCARD */
 483         /*
 484          * Only CONFIG_IDE_8xx_PCCARD is using the interrupt of the
 485          * MPC8xx's PCMCIA controller, so there is nothing to be done here
 486          * for CONFIG_IDE_8xx_DIRECT and CONFIG_IDE_EXT_DIRECT.
 487          * The interrupt is handled somewhere else.     -- Steven
 488          */
 489 #endif /* CONFIG_IDE_8xx_PCCARD */
 490 }
 491
 492
 493
 494 /*
 495  * CIS Tupel codes
 496  */
 497 #define CISTPL_NULL             0x00
 498 #define CISTPL_DEVICE           0x01
 499 #define CISTPL_LONGLINK_CB      0x02
 500 #define CISTPL_INDIRECT         0x03
 501 #define CISTPL_CONFIG_CB        0x04
 502 #define CISTPL_CFTABLE_ENTRY_CB 0x05
 503 #define CISTPL_LONGLINK_MFC     0x06
 504 #define CISTPL_BAR              0x07
 505 #define CISTPL_PWR_MGMNT        0x08
 506 #define CISTPL_EXTDEVICE        0x09
 507 #define CISTPL_CHECKSUM         0x10
 508 #define CISTPL_LONGLINK_A       0x11
 509 #define CISTPL_LONGLINK_C       0x12
 510 #define CISTPL_LINKTARGET       0x13
 511 #define CISTPL_NO_LINK          0x14
 512 #define CISTPL_VERS_1           0x15
 513 #define CISTPL_ALTSTR           0x16
 514 #define CISTPL_DEVICE_A         0x17
 515 #define CISTPL_JEDEC_C          0x18
 516 #define CISTPL_JEDEC_A          0x19
 517 #define CISTPL_CONFIG           0x1a
 518 #define CISTPL_CFTABLE_ENTRY    0x1b
 519 #define CISTPL_DEVICE_OC        0x1c
 520 #define CISTPL_DEVICE_OA        0x1d
 521 #define CISTPL_DEVICE_GEO       0x1e
 522 #define CISTPL_DEVICE_GEO_A     0x1f
 523 #define CISTPL_MANFID           0x20
 524 #define CISTPL_FUNCID           0x21
 525 #define CISTPL_FUNCE            0x22
 526 #define CISTPL_SWIL             0x23
 527 #define CISTPL_END              0xff
 528
 529 /*
 530  * CIS Function ID codes
 531  */
 532 #define CISTPL_FUNCID_MULTI     0x00
 533 #define CISTPL_FUNCID_MEMORY    0x01
 534 #define CISTPL_FUNCID_SERIAL    0x02
 535 #define CISTPL_FUNCID_PARALLEL  0x03
 536 #define CISTPL_FUNCID_FIXED     0x04
 537 #define CISTPL_FUNCID_VIDEO     0x05
 538 #define CISTPL_FUNCID_NETWORK   0x06
 539 #define CISTPL_FUNCID_AIMS      0x07
 540 #define CISTPL_FUNCID_SCSI      0x08
 541
 542 /*
 543  * Fixed Disk FUNCE codes
 544  */
 545 #define CISTPL_IDE_INTERFACE    0x01
 546
 547 #define CISTPL_FUNCE_IDE_IFACE  0x01
 548 #define CISTPL_FUNCE_IDE_MASTER 0x02
 549 #define CISTPL_FUNCE_IDE_SLAVE  0x03
 550
 551 /* First feature byte */
 552 #define CISTPL_IDE_SILICON      0x04
 553 #define CISTPL_IDE_UNIQUE       0x08
 554 #define CISTPL_IDE_DUAL         0x10
 555
 556 /* Second feature byte */
 557 #define CISTPL_IDE_HAS_SLEEP    0x01
 558 #define CISTPL_IDE_HAS_STANDBY  0x02
 559 #define CISTPL_IDE_HAS_IDLE     0x04
 560 #define CISTPL_IDE_LOW_POWER    0x08
 561 #define CISTPL_IDE_REG_INHIBIT  0x10
 562 #define CISTPL_IDE_HAS_INDEX    0x20
 563 #define CISTPL_IDE_IOIS16       0x40
 564
 565
 566 /* -------------------------------------------------------------------- */
 567
 568
 569 #define MAX_TUPEL_SZ    512
 570 #define MAX_FEATURES    4
 571
 572 static int check_ide_device (unsigned long base)
 573 {
 574         volatile u8 *ident = NULL;
 575         volatile u8 *feature_p[MAX_FEATURES];
 576         volatile u8 *p, *start;
 577         int n_features = 0;
 578         u8 func_id = ~0;
 579         u8 code, len;
 580         unsigned short config_base = 0;
 581         int found = 0;
 582         int i;
 583
 584 #ifdef DEBUG
 585         printk ("PCMCIA MEM: %08lX\n", base);
 586 #endif
 587         start = p = (volatile u8 *) base;
 588
 589         while ((p - start) < MAX_TUPEL_SZ) {
 590
 591                 code = *p; p += 2;
 592
 593                 if (code == 0xFF) { /* End of chain */
 594                         break;
 595                 }
 596
 597                 len = *p; p += 2;
 598 #ifdef  DEBUG_PCMCIA
 599                 { volatile u8 *q = p;
 600                         printk ("\nTuple code %02x  length %d\n\tData:",
 601                                 code, len);
 602
 603                         for (i = 0; i < len; ++i) {
 604                                 printk (" %02x", *q);
 605                                 q+= 2;
 606                         }
 607                 }
 608 #endif  /* DEBUG_PCMCIA */
 609                 switch (code) {
 610                 case CISTPL_VERS_1:
 611                         ident = p + 4;
 612                         break;
 613                 case CISTPL_FUNCID:
 614                         func_id = *p;
 615                         break;
 616                 case CISTPL_FUNCE:
 617                         if (n_features < MAX_FEATURES)
 618                                 feature_p[n_features++] = p;
 619                         break;
 620                 case CISTPL_CONFIG:
 621                         config_base = (*(p+6) << 8) + (*(p+4));
 622                 default:
 623                         break;
 624                 }
 625                 p += 2 * len;
 626         }
 627
 628         found = identify (ident);
 629
 630         if (func_id != ((u8)~0)) {
 631                 print_funcid (func_id);
 632
 633                 if (func_id == CISTPL_FUNCID_FIXED)
 634                         found = 1;
 635                 else
 636                         return (1);     /* no disk drive */
 637         }
 638
 639         for (i=0; i<n_features; ++i) {
 640                 print_fixed (feature_p[i]);
 641         }
 642
 643         if (!found) {
 644                 printk ("unknown card type\n");
 645                 return (1);
 646         }
 647
 648         /* set level mode irq and I/O mapped device in config reg*/
 649         *((u8 *)(base + config_base)) = 0x41;
 650
 651         return (0);
 652 }
 653
 654 /* ------------------------------------------------------------------------- */
 655
 656 static void print_funcid (int func)
 657 {
 658         switch (func) {
 659         case CISTPL_FUNCID_MULTI:
 660                 printk (" Multi-Function");
 661                 break;
 662         case CISTPL_FUNCID_MEMORY:
 663                 printk (" Memory");
 664                 break;
 665         case CISTPL_FUNCID_SERIAL:
 666                 printk (" Serial Port");
 667                 break;
 668         case CISTPL_FUNCID_PARALLEL:
 669                 printk (" Parallel Port");
 670                 break;
 671         case CISTPL_FUNCID_FIXED:
 672                 printk (" Fixed Disk");
 673                 break;
 674         case CISTPL_FUNCID_VIDEO:
 675                 printk (" Video Adapter");
 676                 break;
 677         case CISTPL_FUNCID_NETWORK:
 678                 printk (" Network Adapter");
 679                 break;
 680         case CISTPL_FUNCID_AIMS:
 681                 printk (" AIMS Card");
 682                 break;
 683         case CISTPL_FUNCID_SCSI:
 684                 printk (" SCSI Adapter");
 685                 break;
 686         default:
 687                 printk (" Unknown");
 688                 break;
 689         }
 690         printk (" Card\n");
 691 }
 692
 693 /* ------------------------------------------------------------------------- */
 694
 695 static void print_fixed (volatile u8 *p)
 696 {
 697         if (p == NULL)
 698                 return;
 699
 700         switch (*p) {
 701         case CISTPL_FUNCE_IDE_IFACE:
 702             {   u8 iface = *(p+2);
 703
 704                 printk ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
 705                 printk (" interface ");
 706                 break;
 707             }
 708         case CISTPL_FUNCE_IDE_MASTER:
 709         case CISTPL_FUNCE_IDE_SLAVE:
 710             {   u8 f1 = *(p+2);
 711                 u8 f2 = *(p+4);
 712
 713                 printk ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
 714
 715                 if (f1 & CISTPL_IDE_UNIQUE)
 716                         printk (" [unique]");
 717
 718                 printk ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
 719
 720                 if (f2 & CISTPL_IDE_HAS_SLEEP)
 721                         printk (" [sleep]");
 722
 723                 if (f2 & CISTPL_IDE_HAS_STANDBY)
 724                         printk (" [standby]");
 725
 726                 if (f2 & CISTPL_IDE_HAS_IDLE)
 727                         printk (" [idle]");
 728
 729                 if (f2 & CISTPL_IDE_LOW_POWER)
 730                         printk (" [low power]");
 731
 732                 if (f2 & CISTPL_IDE_REG_INHIBIT)
 733                         printk (" [reg inhibit]");
 734
 735                 if (f2 & CISTPL_IDE_HAS_INDEX)
 736                         printk (" [index]");
 737
 738                 if (f2 & CISTPL_IDE_IOIS16)
 739                         printk (" [IOis16]");
 740
 741                 break;
 742             }
 743         }
 744         printk ("\n");
 745 }
 746
 747 /* ------------------------------------------------------------------------- */
 748
 749
 750 #define MAX_IDENT_CHARS         64
 751 #define MAX_IDENT_FIELDS        4
 752
 753 static u8 *known_cards[] = {
 754         "ARGOSY PnPIDE D5",
 755         NULL
 756 };
 757
 758 static int identify  (volatile u8 *p)
 759 {
 760         u8 id_str[MAX_IDENT_CHARS];
 761         u8 data;
 762         u8 *t;
 763         u8 **card;
 764         int i, done;
 765
 766         if (p == NULL)
 767                 return (0);     /* Don't know */
 768
 769         t = id_str;
 770         done =0;
 771
 772         for (i=0; i<=4 && !done; ++i, p+=2) {
 773                 while ((data = *p) != '\0') {
 774                         if (data == 0xFF) {
 775                                 done = 1;
 776                                 break;
 777                         }
 778                         *t++ = data;
 779                         if (t == &id_str[MAX_IDENT_CHARS-1]) {
 780                                 done = 1;
 781                                 break;
 782                         }
 783                         p += 2;
 784                 }
 785                 if (!done)
 786                         *t++ = ' ';
 787         }
 788         *t = '\0';
 789         while (--t > id_str) {
 790                 if (*t == ' ')
 791                         *t = '\0';
 792                 else
 793                         break;
 794         }
 795         printk ("Card ID: %s\n", id_str);
 796
 797         for (card=known_cards; *card; ++card) {
 798                 if (strcmp(*card, id_str) == 0) {       /* found! */
 799                         return (1);
 800                 }
 801         }
 802
 803         return (0);     /* don't know */
 804 }
 805
 806 static int __init mpc8xx_ide_probe(void)
 807 {
 808         hw_regs_t hw;
 809         u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 810
 811 #ifdef IDE0_BASE_OFFSET
 812         memset(&hw, 0, sizeof(hw));
 813         if (!m8xx_ide_init_ports(&hw, 0)) {
 814                 ide_hwif_t *hwif = ide_find_port();
 815
 816                 if (hwif) {
 817                         ide_init_port_hw(hwif, &hw);
 818                         hwif->pio_mask = ATA_PIO4;
 819                         hwif->port_ops = &m8xx_port_ops;
 820
 821                         idx[0] = hwif->index;
 822                 }
 823         }
 824 #ifdef IDE1_BASE_OFFSET
 825         memset(&hw, 0, sizeof(hw));
 826         if (!m8xx_ide_init_ports(&hw, 1)) {
 827                 ide_hwif_t *mate = ide_find_port();
 828
 829                 if (mate) {
 830                         ide_init_port_hw(mate, &hw);
 831                         mate->pio_mask = ATA_PIO4;
 832                         mate->port_ops = &m8xx_port_ops;
 833
 834                         idx[1] = mate->index;
 835                 }
 836         }
 837 #endif
 838 #endif
 839
 840         ide_device_add(idx, NULL);
 841
 842         return 0;
 843 }
 844
 845 module_init(mpc8xx_ide_probe);
 846
 847 MODULE_LICENSE("GPL");