1 /*****************************************************************************
5 * $Date: 2005/06/21 18:29:48 $ *
8 * part of the Chelsio 10Gb Ethernet Driver. *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License, version 2, as *
12 * published by the Free Software Foundation. *
14 * You should have received a copy of the GNU General Public License along *
15 * with this program; if not, write to the Free Software Foundation, Inc., *
16 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
19 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
22 * http://www.chelsio.com *
24 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
25 * All rights reserved. *
27 * Maintainers: maintainers@chelsio.com *
29 * Authors: Dimitrios Michailidis <dm@chelsio.com> *
30 * Tina Yang <tainay@chelsio.com> *
31 * Felix Marti <felix@chelsio.com> *
32 * Scott Bardone <sbardone@chelsio.com> *
33 * Kurt Ottaway <kottaway@chelsio.com> *
34 * Frank DiMambro <frank@chelsio.com> *
38 ****************************************************************************/
42 #include <linux/types.h>
43 #include <linux/errno.h>
44 #include <linux/pci.h>
45 #include <linux/ktime.h>
46 #include <linux/netdevice.h>
47 #include <linux/etherdevice.h>
48 #include <linux/if_vlan.h>
49 #include <linux/skbuff.h>
50 #include <linux/init.h>
52 #include <linux/tcp.h>
55 #include <linux/if_arp.h>
62 /* This belongs in if_ether.h */
63 #define ETH_P_CPL5 0xf
66 #define SGE_FREELQ_N 2
67 #define SGE_CMDQ0_E_N 1024
68 #define SGE_CMDQ1_E_N 128
69 #define SGE_FREEL_SIZE 4096
70 #define SGE_JUMBO_FREEL_SIZE 512
71 #define SGE_FREEL_REFILL_THRESH 16
72 #define SGE_RESPQ_E_N 1024
73 #define SGE_INTRTIMER_NRES 1000
74 #define SGE_RX_SM_BUF_SIZE 1536
75 #define SGE_TX_DESC_MAX_PLEN 16384
77 #define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4)
80 * Period of the TX buffer reclaim timer. This timer does not need to run
81 * frequently as TX buffers are usually reclaimed by new TX packets.
83 #define TX_RECLAIM_PERIOD (HZ / 4)
85 #define M_CMD_LEN 0x7fffffff
86 #define V_CMD_LEN(v) (v)
87 #define G_CMD_LEN(v) ((v) & M_CMD_LEN)
88 #define V_CMD_GEN1(v) ((v) << 31)
89 #define V_CMD_GEN2(v) (v)
90 #define F_CMD_DATAVALID (1 << 1)
91 #define F_CMD_SOP (1 << 2)
92 #define V_CMD_EOP(v) ((v) << 3)
95 * Command queue, receive buffer list, and response queue descriptors.
97 #if defined(__BIG_ENDIAN_BITFIELD)
114 u32 Cmdq1CreditReturn
: 5;
115 u32 Cmdq1DmaComplete
: 5;
116 u32 Cmdq0CreditReturn
: 5;
117 u32 Cmdq0DmaComplete
: 5;
124 u32 GenerationBit
: 1;
127 #elif defined(__LITTLE_ENDIAN_BITFIELD)
144 u32 GenerationBit
: 1;
151 u32 Cmdq0DmaComplete
: 5;
152 u32 Cmdq0CreditReturn
: 5;
153 u32 Cmdq1DmaComplete
: 5;
154 u32 Cmdq1CreditReturn
: 5;
160 * SW Context Command and Freelist Queue Descriptors
164 DECLARE_PCI_UNMAP_ADDR(dma_addr
);
165 DECLARE_PCI_UNMAP_LEN(dma_len
);
170 DECLARE_PCI_UNMAP_ADDR(dma_addr
);
171 DECLARE_PCI_UNMAP_LEN(dma_len
);
175 * SW command, freelist and response rings
178 unsigned long status
; /* HW DMA fetch status */
179 unsigned int in_use
; /* # of in-use command descriptors */
180 unsigned int size
; /* # of descriptors */
181 unsigned int processed
; /* total # of descs HW has processed */
182 unsigned int cleaned
; /* total # of descs SW has reclaimed */
183 unsigned int stop_thres
; /* SW TX queue suspend threshold */
184 u16 pidx
; /* producer index (SW) */
185 u16 cidx
; /* consumer index (HW) */
186 u8 genbit
; /* current generation (=valid) bit */
187 u8 sop
; /* is next entry start of packet? */
188 struct cmdQ_e
*entries
; /* HW command descriptor Q */
189 struct cmdQ_ce
*centries
; /* SW command context descriptor Q */
190 dma_addr_t dma_addr
; /* DMA addr HW command descriptor Q */
191 spinlock_t lock
; /* Lock to protect cmdQ enqueuing */
195 unsigned int credits
; /* # of available RX buffers */
196 unsigned int size
; /* free list capacity */
197 u16 pidx
; /* producer index (SW) */
198 u16 cidx
; /* consumer index (HW) */
199 u16 rx_buffer_size
; /* Buffer size on this free list */
200 u16 dma_offset
; /* DMA offset to align IP headers */
201 u16 recycleq_idx
; /* skb recycle q to use */
202 u8 genbit
; /* current generation (=valid) bit */
203 struct freelQ_e
*entries
; /* HW freelist descriptor Q */
204 struct freelQ_ce
*centries
; /* SW freelist context descriptor Q */
205 dma_addr_t dma_addr
; /* DMA addr HW freelist descriptor Q */
209 unsigned int credits
; /* credits to be returned to SGE */
210 unsigned int size
; /* # of response Q descriptors */
211 u16 cidx
; /* consumer index (SW) */
212 u8 genbit
; /* current generation(=valid) bit */
213 struct respQ_e
*entries
; /* HW response descriptor Q */
214 dma_addr_t dma_addr
; /* DMA addr HW response descriptor Q */
217 /* Bit flags for cmdQ.status */
219 CMDQ_STAT_RUNNING
= 1, /* fetch engine is running */
220 CMDQ_STAT_LAST_PKT_DB
= 2 /* last packet rung the doorbell */
223 /* T204 TX SW scheduler */
225 /* Per T204 TX port */
227 unsigned int avail
; /* available bits - quota */
228 unsigned int drain_bits_per_1024ns
; /* drain rate */
229 unsigned int speed
; /* drain rate, mbps */
230 unsigned int mtu
; /* mtu size */
231 struct sk_buff_head skbq
; /* pending skbs */
234 /* Per T204 device */
236 ktime_t last_updated
; /* last time quotas were computed */
237 unsigned int max_avail
; /* max bits to be sent to any port */
238 unsigned int port
; /* port index (round robin ports) */
239 unsigned int num
; /* num skbs in per port queues */
240 struct sched_port p
[MAX_NPORTS
];
241 struct tasklet_struct sched_tsk
;/* tasklet used to run scheduler */
243 static void restart_sched(unsigned long);
247 * Main SGE data structure
249 * Interrupts are handled by a single CPU and it is likely that on a MP system
250 * the application is migrated to another CPU. In that scenario, we try to
251 * seperate the RX(in irq context) and TX state in order to decrease memory
255 struct adapter
*adapter
; /* adapter backpointer */
256 struct net_device
*netdev
; /* netdevice backpointer */
257 struct freelQ freelQ
[SGE_FREELQ_N
]; /* buffer free lists */
258 struct respQ respQ
; /* response Q */
259 unsigned long stopped_tx_queues
; /* bitmap of suspended Tx queues */
260 unsigned int rx_pkt_pad
; /* RX padding for L2 packets */
261 unsigned int jumbo_fl
; /* jumbo freelist Q index */
262 unsigned int intrtimer_nres
; /* no-resource interrupt timer */
263 unsigned int fixed_intrtimer
;/* non-adaptive interrupt timer */
264 struct timer_list tx_reclaim_timer
; /* reclaims TX buffers */
265 struct timer_list espibug_timer
;
266 unsigned long espibug_timeout
;
267 struct sk_buff
*espibug_skb
[MAX_NPORTS
];
268 u32 sge_control
; /* shadow value of sge control reg */
269 struct sge_intr_counts stats
;
270 struct sge_port_stats
*port_stats
[MAX_NPORTS
];
271 struct sched
*tx_sched
;
272 struct cmdQ cmdQ
[SGE_CMDQ_N
] ____cacheline_aligned_in_smp
;
276 * stop tasklet and free all pending skb's
278 static void tx_sched_stop(struct sge
*sge
)
280 struct sched
*s
= sge
->tx_sched
;
283 tasklet_kill(&s
->sched_tsk
);
285 for (i
= 0; i
< MAX_NPORTS
; i
++)
286 __skb_queue_purge(&s
->p
[s
->port
].skbq
);
290 * t1_sched_update_parms() is called when the MTU or link speed changes. It
291 * re-computes scheduler parameters to scope with the change.
293 unsigned int t1_sched_update_parms(struct sge
*sge
, unsigned int port
,
294 unsigned int mtu
, unsigned int speed
)
296 struct sched
*s
= sge
->tx_sched
;
297 struct sched_port
*p
= &s
->p
[port
];
298 unsigned int max_avail_segs
;
300 pr_debug("t1_sched_update_params mtu=%d speed=%d\n", mtu
, speed
);
307 unsigned long long drain
= 1024ULL * p
->speed
* (p
->mtu
- 40);
308 do_div(drain
, (p
->mtu
+ 50) * 1000);
309 p
->drain_bits_per_1024ns
= (unsigned int) drain
;
312 p
->drain_bits_per_1024ns
=
313 90 * p
->drain_bits_per_1024ns
/ 100;
316 if (board_info(sge
->adapter
)->board
== CHBT_BOARD_CHT204
) {
317 p
->drain_bits_per_1024ns
-= 16;
318 s
->max_avail
= max(4096U, p
->mtu
+ 16 + 14 + 4);
319 max_avail_segs
= max(1U, 4096 / (p
->mtu
- 40));
321 s
->max_avail
= 16384;
322 max_avail_segs
= max(1U, 9000 / (p
->mtu
- 40));
325 pr_debug("t1_sched_update_parms: mtu %u speed %u max_avail %u "
326 "max_avail_segs %u drain_bits_per_1024ns %u\n", p
->mtu
,
327 p
->speed
, s
->max_avail
, max_avail_segs
,
328 p
->drain_bits_per_1024ns
);
330 return max_avail_segs
* (p
->mtu
- 40);
336 * t1_sched_max_avail_bytes() tells the scheduler the maximum amount of
337 * data that can be pushed per port.
339 void t1_sched_set_max_avail_bytes(struct sge
*sge
, unsigned int val
)
341 struct sched
*s
= sge
->tx_sched
;
345 for (i
= 0; i
< MAX_NPORTS
; i
++)
346 t1_sched_update_parms(sge
, i
, 0, 0);
350 * t1_sched_set_drain_bits_per_us() tells the scheduler at which rate a port
353 void t1_sched_set_drain_bits_per_us(struct sge
*sge
, unsigned int port
,
356 struct sched
*s
= sge
->tx_sched
;
357 struct sched_port
*p
= &s
->p
[port
];
358 p
->drain_bits_per_1024ns
= val
* 1024 / 1000;
359 t1_sched_update_parms(sge
, port
, 0, 0);
366 * get_clock() implements a ns clock (see ktime_get)
368 static inline ktime_t
get_clock(void)
373 return timespec_to_ktime(ts
);
377 * tx_sched_init() allocates resources and does basic initialization.
379 static int tx_sched_init(struct sge
*sge
)
384 s
= kzalloc(sizeof (struct sched
), GFP_KERNEL
);
388 pr_debug("tx_sched_init\n");
389 tasklet_init(&s
->sched_tsk
, restart_sched
, (unsigned long) sge
);
392 for (i
= 0; i
< MAX_NPORTS
; i
++) {
393 skb_queue_head_init(&s
->p
[i
].skbq
);
394 t1_sched_update_parms(sge
, i
, 1500, 1000);
401 * sched_update_avail() computes the delta since the last time it was called
402 * and updates the per port quota (number of bits that can be sent to the any
405 static inline int sched_update_avail(struct sge
*sge
)
407 struct sched
*s
= sge
->tx_sched
;
408 ktime_t now
= get_clock();
410 long long delta_time_ns
;
412 delta_time_ns
= ktime_to_ns(ktime_sub(now
, s
->last_updated
));
414 pr_debug("sched_update_avail delta=%lld\n", delta_time_ns
);
415 if (delta_time_ns
< 15000)
418 for (i
= 0; i
< MAX_NPORTS
; i
++) {
419 struct sched_port
*p
= &s
->p
[i
];
420 unsigned int delta_avail
;
422 delta_avail
= (p
->drain_bits_per_1024ns
* delta_time_ns
) >> 13;
423 p
->avail
= min(p
->avail
+ delta_avail
, s
->max_avail
);
426 s
->last_updated
= now
;
432 * sched_skb() is called from two different places. In the tx path, any
433 * packet generating load on an output port will call sched_skb()
434 * (skb != NULL). In addition, sched_skb() is called from the irq/soft irq
435 * context (skb == NULL).
436 * The scheduler only returns a skb (which will then be sent) if the
437 * length of the skb is <= the current quota of the output port.
439 static struct sk_buff
*sched_skb(struct sge
*sge
, struct sk_buff
*skb
,
440 unsigned int credits
)
442 struct sched
*s
= sge
->tx_sched
;
443 struct sk_buff_head
*skbq
;
444 unsigned int i
, len
, update
= 1;
446 pr_debug("sched_skb %p\n", skb
);
451 skbq
= &s
->p
[skb
->dev
->if_port
].skbq
;
452 __skb_queue_tail(skbq
, skb
);
457 if (credits
< MAX_SKB_FRAGS
+ 1)
461 for (i
= 0; i
< MAX_NPORTS
; i
++) {
462 s
->port
= ++s
->port
& (MAX_NPORTS
- 1);
463 skbq
= &s
->p
[s
->port
].skbq
;
465 skb
= skb_peek(skbq
);
471 if (len
<= s
->p
[s
->port
].avail
) {
472 s
->p
[s
->port
].avail
-= len
;
474 __skb_unlink(skb
, skbq
);
480 if (update
-- && sched_update_avail(sge
))
484 /* If there are more pending skbs, we use the hardware to schedule us
487 if (s
->num
&& !skb
) {
488 struct cmdQ
*q
= &sge
->cmdQ
[0];
489 clear_bit(CMDQ_STAT_LAST_PKT_DB
, &q
->status
);
490 if (test_and_set_bit(CMDQ_STAT_RUNNING
, &q
->status
) == 0) {
491 set_bit(CMDQ_STAT_LAST_PKT_DB
, &q
->status
);
492 writel(F_CMDQ0_ENABLE
, sge
->adapter
->regs
+ A_SG_DOORBELL
);
495 pr_debug("sched_skb ret %p\n", skb
);
501 * PIO to indicate that memory mapped Q contains valid descriptor(s).
503 static inline void doorbell_pio(struct adapter
*adapter
, u32 val
)
506 writel(val
, adapter
->regs
+ A_SG_DOORBELL
);
510 * Frees all RX buffers on the freelist Q. The caller must make sure that
511 * the SGE is turned off before calling this function.
513 static void free_freelQ_buffers(struct pci_dev
*pdev
, struct freelQ
*q
)
515 unsigned int cidx
= q
->cidx
;
517 while (q
->credits
--) {
518 struct freelQ_ce
*ce
= &q
->centries
[cidx
];
520 pci_unmap_single(pdev
, pci_unmap_addr(ce
, dma_addr
),
521 pci_unmap_len(ce
, dma_len
),
523 dev_kfree_skb(ce
->skb
);
525 if (++cidx
== q
->size
)
531 * Free RX free list and response queue resources.
533 static void free_rx_resources(struct sge
*sge
)
535 struct pci_dev
*pdev
= sge
->adapter
->pdev
;
536 unsigned int size
, i
;
538 if (sge
->respQ
.entries
) {
539 size
= sizeof(struct respQ_e
) * sge
->respQ
.size
;
540 pci_free_consistent(pdev
, size
, sge
->respQ
.entries
,
541 sge
->respQ
.dma_addr
);
544 for (i
= 0; i
< SGE_FREELQ_N
; i
++) {
545 struct freelQ
*q
= &sge
->freelQ
[i
];
548 free_freelQ_buffers(pdev
, q
);
552 size
= sizeof(struct freelQ_e
) * q
->size
;
553 pci_free_consistent(pdev
, size
, q
->entries
,
560 * Allocates basic RX resources, consisting of memory mapped freelist Qs and a
563 static int alloc_rx_resources(struct sge
*sge
, struct sge_params
*p
)
565 struct pci_dev
*pdev
= sge
->adapter
->pdev
;
566 unsigned int size
, i
;
568 for (i
= 0; i
< SGE_FREELQ_N
; i
++) {
569 struct freelQ
*q
= &sge
->freelQ
[i
];
572 q
->size
= p
->freelQ_size
[i
];
573 q
->dma_offset
= sge
->rx_pkt_pad
? 0 : NET_IP_ALIGN
;
574 size
= sizeof(struct freelQ_e
) * q
->size
;
575 q
->entries
= pci_alloc_consistent(pdev
, size
, &q
->dma_addr
);
579 size
= sizeof(struct freelQ_ce
) * q
->size
;
580 q
->centries
= kzalloc(size
, GFP_KERNEL
);
586 * Calculate the buffer sizes for the two free lists. FL0 accommodates
587 * regular sized Ethernet frames, FL1 is sized not to exceed 16K,
588 * including all the sk_buff overhead.
590 * Note: For T2 FL0 and FL1 are reversed.
592 sge
->freelQ
[!sge
->jumbo_fl
].rx_buffer_size
= SGE_RX_SM_BUF_SIZE
+
593 sizeof(struct cpl_rx_data
) +
594 sge
->freelQ
[!sge
->jumbo_fl
].dma_offset
;
597 SKB_DATA_ALIGN(sizeof(struct skb_shared_info
));
599 sge
->freelQ
[sge
->jumbo_fl
].rx_buffer_size
= size
;
602 * Setup which skb recycle Q should be used when recycling buffers from
605 sge
->freelQ
[!sge
->jumbo_fl
].recycleq_idx
= 0;
606 sge
->freelQ
[sge
->jumbo_fl
].recycleq_idx
= 1;
608 sge
->respQ
.genbit
= 1;
609 sge
->respQ
.size
= SGE_RESPQ_E_N
;
610 sge
->respQ
.credits
= 0;
611 size
= sizeof(struct respQ_e
) * sge
->respQ
.size
;
613 pci_alloc_consistent(pdev
, size
, &sge
->respQ
.dma_addr
);
614 if (!sge
->respQ
.entries
)
619 free_rx_resources(sge
);
624 * Reclaims n TX descriptors and frees the buffers associated with them.
626 static void free_cmdQ_buffers(struct sge
*sge
, struct cmdQ
*q
, unsigned int n
)
629 struct pci_dev
*pdev
= sge
->adapter
->pdev
;
630 unsigned int cidx
= q
->cidx
;
633 ce
= &q
->centries
[cidx
];
635 if (likely(pci_unmap_len(ce
, dma_len
))) {
636 pci_unmap_single(pdev
, pci_unmap_addr(ce
, dma_addr
),
637 pci_unmap_len(ce
, dma_len
),
643 dev_kfree_skb_any(ce
->skb
);
647 if (++cidx
== q
->size
) {
658 * Assumes that SGE is stopped and all interrupts are disabled.
660 static void free_tx_resources(struct sge
*sge
)
662 struct pci_dev
*pdev
= sge
->adapter
->pdev
;
663 unsigned int size
, i
;
665 for (i
= 0; i
< SGE_CMDQ_N
; i
++) {
666 struct cmdQ
*q
= &sge
->cmdQ
[i
];
670 free_cmdQ_buffers(sge
, q
, q
->in_use
);
674 size
= sizeof(struct cmdQ_e
) * q
->size
;
675 pci_free_consistent(pdev
, size
, q
->entries
,
682 * Allocates basic TX resources, consisting of memory mapped command Qs.
684 static int alloc_tx_resources(struct sge
*sge
, struct sge_params
*p
)
686 struct pci_dev
*pdev
= sge
->adapter
->pdev
;
687 unsigned int size
, i
;
689 for (i
= 0; i
< SGE_CMDQ_N
; i
++) {
690 struct cmdQ
*q
= &sge
->cmdQ
[i
];
694 q
->size
= p
->cmdQ_size
[i
];
697 q
->processed
= q
->cleaned
= 0;
699 spin_lock_init(&q
->lock
);
700 size
= sizeof(struct cmdQ_e
) * q
->size
;
701 q
->entries
= pci_alloc_consistent(pdev
, size
, &q
->dma_addr
);
705 size
= sizeof(struct cmdQ_ce
) * q
->size
;
706 q
->centries
= kzalloc(size
, GFP_KERNEL
);
712 * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE
713 * only. For queue 0 set the stop threshold so we can handle one more
714 * packet from each port, plus reserve an additional 24 entries for
715 * Ethernet packets only. Queue 1 never suspends nor do we reserve
716 * space for Ethernet packets.
718 sge
->cmdQ
[0].stop_thres
= sge
->adapter
->params
.nports
*
723 free_tx_resources(sge
);
727 static inline void setup_ring_params(struct adapter
*adapter
, u64 addr
,
728 u32 size
, int base_reg_lo
,
729 int base_reg_hi
, int size_reg
)
731 writel((u32
)addr
, adapter
->regs
+ base_reg_lo
);
732 writel(addr
>> 32, adapter
->regs
+ base_reg_hi
);
733 writel(size
, adapter
->regs
+ size_reg
);
737 * Enable/disable VLAN acceleration.
739 void t1_set_vlan_accel(struct adapter
*adapter
, int on_off
)
741 struct sge
*sge
= adapter
->sge
;
743 sge
->sge_control
&= ~F_VLAN_XTRACT
;
745 sge
->sge_control
|= F_VLAN_XTRACT
;
746 if (adapter
->open_device_map
) {
747 writel(sge
->sge_control
, adapter
->regs
+ A_SG_CONTROL
);
748 readl(adapter
->regs
+ A_SG_CONTROL
); /* flush */
753 * Programs the various SGE registers. However, the engine is not yet enabled,
754 * but sge->sge_control is setup and ready to go.
756 static void configure_sge(struct sge
*sge
, struct sge_params
*p
)
758 struct adapter
*ap
= sge
->adapter
;
760 writel(0, ap
->regs
+ A_SG_CONTROL
);
761 setup_ring_params(ap
, sge
->cmdQ
[0].dma_addr
, sge
->cmdQ
[0].size
,
762 A_SG_CMD0BASELWR
, A_SG_CMD0BASEUPR
, A_SG_CMD0SIZE
);
763 setup_ring_params(ap
, sge
->cmdQ
[1].dma_addr
, sge
->cmdQ
[1].size
,
764 A_SG_CMD1BASELWR
, A_SG_CMD1BASEUPR
, A_SG_CMD1SIZE
);
765 setup_ring_params(ap
, sge
->freelQ
[0].dma_addr
,
766 sge
->freelQ
[0].size
, A_SG_FL0BASELWR
,
767 A_SG_FL0BASEUPR
, A_SG_FL0SIZE
);
768 setup_ring_params(ap
, sge
->freelQ
[1].dma_addr
,
769 sge
->freelQ
[1].size
, A_SG_FL1BASELWR
,
770 A_SG_FL1BASEUPR
, A_SG_FL1SIZE
);
772 /* The threshold comparison uses <. */
773 writel(SGE_RX_SM_BUF_SIZE
+ 1, ap
->regs
+ A_SG_FLTHRESHOLD
);
775 setup_ring_params(ap
, sge
->respQ
.dma_addr
, sge
->respQ
.size
,
776 A_SG_RSPBASELWR
, A_SG_RSPBASEUPR
, A_SG_RSPSIZE
);
777 writel((u32
)sge
->respQ
.size
- 1, ap
->regs
+ A_SG_RSPQUEUECREDIT
);
779 sge
->sge_control
= F_CMDQ0_ENABLE
| F_CMDQ1_ENABLE
| F_FL0_ENABLE
|
780 F_FL1_ENABLE
| F_CPL_ENABLE
| F_RESPONSE_QUEUE_ENABLE
|
781 V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS
| F_ISCSI_COALESCE
|
782 V_RX_PKT_OFFSET(sge
->rx_pkt_pad
);
784 #if defined(__BIG_ENDIAN_BITFIELD)
785 sge
->sge_control
|= F_ENABLE_BIG_ENDIAN
;
788 /* Initialize no-resource timer */
789 sge
->intrtimer_nres
= SGE_INTRTIMER_NRES
* core_ticks_per_usec(ap
);
791 t1_sge_set_coalesce_params(sge
, p
);
795 * Return the payload capacity of the jumbo free-list buffers.
797 static inline unsigned int jumbo_payload_capacity(const struct sge
*sge
)
799 return sge
->freelQ
[sge
->jumbo_fl
].rx_buffer_size
-
800 sge
->freelQ
[sge
->jumbo_fl
].dma_offset
-
801 sizeof(struct cpl_rx_data
);
805 * Frees all SGE related resources and the sge structure itself
807 void t1_sge_destroy(struct sge
*sge
)
811 for_each_port(sge
->adapter
, i
)
812 free_percpu(sge
->port_stats
[i
]);
814 kfree(sge
->tx_sched
);
815 free_tx_resources(sge
);
816 free_rx_resources(sge
);
821 * Allocates new RX buffers on the freelist Q (and tracks them on the freelist
822 * context Q) until the Q is full or alloc_skb fails.
824 * It is possible that the generation bits already match, indicating that the
825 * buffer is already valid and nothing needs to be done. This happens when we
826 * copied a received buffer into a new sk_buff during the interrupt processing.
828 * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad),
829 * we specify a RX_OFFSET in order to make sure that the IP header is 4B
832 static void refill_free_list(struct sge
*sge
, struct freelQ
*q
)
834 struct pci_dev
*pdev
= sge
->adapter
->pdev
;
835 struct freelQ_ce
*ce
= &q
->centries
[q
->pidx
];
836 struct freelQ_e
*e
= &q
->entries
[q
->pidx
];
837 unsigned int dma_len
= q
->rx_buffer_size
- q
->dma_offset
;
839 while (q
->credits
< q
->size
) {
843 skb
= alloc_skb(q
->rx_buffer_size
, GFP_ATOMIC
);
847 skb_reserve(skb
, q
->dma_offset
);
848 mapping
= pci_map_single(pdev
, skb
->data
, dma_len
,
850 skb_reserve(skb
, sge
->rx_pkt_pad
);
853 pci_unmap_addr_set(ce
, dma_addr
, mapping
);
854 pci_unmap_len_set(ce
, dma_len
, dma_len
);
855 e
->addr_lo
= (u32
)mapping
;
856 e
->addr_hi
= (u64
)mapping
>> 32;
857 e
->len_gen
= V_CMD_LEN(dma_len
) | V_CMD_GEN1(q
->genbit
);
859 e
->gen2
= V_CMD_GEN2(q
->genbit
);
863 if (++q
->pidx
== q
->size
) {
874 * Calls refill_free_list for both free lists. If we cannot fill at least 1/4
875 * of both rings, we go into 'few interrupt mode' in order to give the system
876 * time to free up resources.
878 static void freelQs_empty(struct sge
*sge
)
880 struct adapter
*adapter
= sge
->adapter
;
881 u32 irq_reg
= readl(adapter
->regs
+ A_SG_INT_ENABLE
);
884 refill_free_list(sge
, &sge
->freelQ
[0]);
885 refill_free_list(sge
, &sge
->freelQ
[1]);
887 if (sge
->freelQ
[0].credits
> (sge
->freelQ
[0].size
>> 2) &&
888 sge
->freelQ
[1].credits
> (sge
->freelQ
[1].size
>> 2)) {
889 irq_reg
|= F_FL_EXHAUSTED
;
890 irqholdoff_reg
= sge
->fixed_intrtimer
;
892 /* Clear the F_FL_EXHAUSTED interrupts for now */
893 irq_reg
&= ~F_FL_EXHAUSTED
;
894 irqholdoff_reg
= sge
->intrtimer_nres
;
896 writel(irqholdoff_reg
, adapter
->regs
+ A_SG_INTRTIMER
);
897 writel(irq_reg
, adapter
->regs
+ A_SG_INT_ENABLE
);
899 /* We reenable the Qs to force a freelist GTS interrupt later */
900 doorbell_pio(adapter
, F_FL0_ENABLE
| F_FL1_ENABLE
);
903 #define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA)
904 #define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
905 #define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \
906 F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
909 * Disable SGE Interrupts
911 void t1_sge_intr_disable(struct sge
*sge
)
913 u32 val
= readl(sge
->adapter
->regs
+ A_PL_ENABLE
);
915 writel(val
& ~SGE_PL_INTR_MASK
, sge
->adapter
->regs
+ A_PL_ENABLE
);
916 writel(0, sge
->adapter
->regs
+ A_SG_INT_ENABLE
);
920 * Enable SGE interrupts.
922 void t1_sge_intr_enable(struct sge
*sge
)
924 u32 en
= SGE_INT_ENABLE
;
925 u32 val
= readl(sge
->adapter
->regs
+ A_PL_ENABLE
);
927 if (sge
->adapter
->flags
& TSO_CAPABLE
)
928 en
&= ~F_PACKET_TOO_BIG
;
929 writel(en
, sge
->adapter
->regs
+ A_SG_INT_ENABLE
);
930 writel(val
| SGE_PL_INTR_MASK
, sge
->adapter
->regs
+ A_PL_ENABLE
);
934 * Clear SGE interrupts.
936 void t1_sge_intr_clear(struct sge
*sge
)
938 writel(SGE_PL_INTR_MASK
, sge
->adapter
->regs
+ A_PL_CAUSE
);
939 writel(0xffffffff, sge
->adapter
->regs
+ A_SG_INT_CAUSE
);
943 * SGE 'Error' interrupt handler
945 int t1_sge_intr_error_handler(struct sge
*sge
)
947 struct adapter
*adapter
= sge
->adapter
;
948 u32 cause
= readl(adapter
->regs
+ A_SG_INT_CAUSE
);
950 if (adapter
->flags
& TSO_CAPABLE
)
951 cause
&= ~F_PACKET_TOO_BIG
;
952 if (cause
& F_RESPQ_EXHAUSTED
)
953 sge
->stats
.respQ_empty
++;
954 if (cause
& F_RESPQ_OVERFLOW
) {
955 sge
->stats
.respQ_overflow
++;
956 CH_ALERT("%s: SGE response queue overflow\n",
959 if (cause
& F_FL_EXHAUSTED
) {
960 sge
->stats
.freelistQ_empty
++;
963 if (cause
& F_PACKET_TOO_BIG
) {
964 sge
->stats
.pkt_too_big
++;
965 CH_ALERT("%s: SGE max packet size exceeded\n",
968 if (cause
& F_PACKET_MISMATCH
) {
969 sge
->stats
.pkt_mismatch
++;
970 CH_ALERT("%s: SGE packet mismatch\n", adapter
->name
);
972 if (cause
& SGE_INT_FATAL
)
973 t1_fatal_err(adapter
);
975 writel(cause
, adapter
->regs
+ A_SG_INT_CAUSE
);
979 const struct sge_intr_counts
*t1_sge_get_intr_counts(const struct sge
*sge
)
984 void t1_sge_get_port_stats(const struct sge
*sge
, int port
,
985 struct sge_port_stats
*ss
)
989 memset(ss
, 0, sizeof(*ss
));
990 for_each_possible_cpu(cpu
) {
991 struct sge_port_stats
*st
= per_cpu_ptr(sge
->port_stats
[port
], cpu
);
993 ss
->rx_cso_good
+= st
->rx_cso_good
;
994 ss
->tx_cso
+= st
->tx_cso
;
995 ss
->tx_tso
+= st
->tx_tso
;
996 ss
->tx_need_hdrroom
+= st
->tx_need_hdrroom
;
997 ss
->vlan_xtract
+= st
->vlan_xtract
;
998 ss
->vlan_insert
+= st
->vlan_insert
;
1003 * recycle_fl_buf - recycle a free list buffer
1004 * @fl: the free list
1005 * @idx: index of buffer to recycle
1007 * Recycles the specified buffer on the given free list by adding it at
1008 * the next available slot on the list.
1010 static void recycle_fl_buf(struct freelQ
*fl
, int idx
)
1012 struct freelQ_e
*from
= &fl
->entries
[idx
];
1013 struct freelQ_e
*to
= &fl
->entries
[fl
->pidx
];
1015 fl
->centries
[fl
->pidx
] = fl
->centries
[idx
];
1016 to
->addr_lo
= from
->addr_lo
;
1017 to
->addr_hi
= from
->addr_hi
;
1018 to
->len_gen
= G_CMD_LEN(from
->len_gen
) | V_CMD_GEN1(fl
->genbit
);
1020 to
->gen2
= V_CMD_GEN2(fl
->genbit
);
1023 if (++fl
->pidx
== fl
->size
) {
1029 static int copybreak __read_mostly
= 256;
1030 module_param(copybreak
, int, 0);
1031 MODULE_PARM_DESC(copybreak
, "Receive copy threshold");
1034 * get_packet - return the next ingress packet buffer
1035 * @pdev: the PCI device that received the packet
1036 * @fl: the SGE free list holding the packet
1037 * @len: the actual packet length, excluding any SGE padding
1038 * @dma_pad: padding at beginning of buffer left by SGE DMA
1039 * @skb_pad: padding to be used if the packet is copied
1040 * @copy_thres: length threshold under which a packet should be copied
1041 * @drop_thres: # of remaining buffers before we start dropping packets
1043 * Get the next packet from a free list and complete setup of the
1044 * sk_buff. If the packet is small we make a copy and recycle the
1045 * original buffer, otherwise we use the original buffer itself. If a
1046 * positive drop threshold is supplied packets are dropped and their
1047 * buffers recycled if (a) the number of remaining buffers is under the
1048 * threshold and the packet is too big to copy, or (b) the packet should
1049 * be copied but there is no memory for the copy.
1051 static inline struct sk_buff
*get_packet(struct pci_dev
*pdev
,
1052 struct freelQ
*fl
, unsigned int len
)
1054 struct sk_buff
*skb
;
1055 const struct freelQ_ce
*ce
= &fl
->centries
[fl
->cidx
];
1057 if (len
< copybreak
) {
1058 skb
= alloc_skb(len
+ 2, GFP_ATOMIC
);
1062 skb_reserve(skb
, 2); /* align IP header */
1064 pci_dma_sync_single_for_cpu(pdev
,
1065 pci_unmap_addr(ce
, dma_addr
),
1066 pci_unmap_len(ce
, dma_len
),
1067 PCI_DMA_FROMDEVICE
);
1068 skb_copy_from_linear_data(ce
->skb
, skb
->data
, len
);
1069 pci_dma_sync_single_for_device(pdev
,
1070 pci_unmap_addr(ce
, dma_addr
),
1071 pci_unmap_len(ce
, dma_len
),
1072 PCI_DMA_FROMDEVICE
);
1073 recycle_fl_buf(fl
, fl
->cidx
);
1078 if (fl
->credits
< 2) {
1079 recycle_fl_buf(fl
, fl
->cidx
);
1083 pci_unmap_single(pdev
, pci_unmap_addr(ce
, dma_addr
),
1084 pci_unmap_len(ce
, dma_len
), PCI_DMA_FROMDEVICE
);
1086 prefetch(skb
->data
);
1093 * unexpected_offload - handle an unexpected offload packet
1094 * @adapter: the adapter
1095 * @fl: the free list that received the packet
1097 * Called when we receive an unexpected offload packet (e.g., the TOE
1098 * function is disabled or the card is a NIC). Prints a message and
1099 * recycles the buffer.
1101 static void unexpected_offload(struct adapter
*adapter
, struct freelQ
*fl
)
1103 struct freelQ_ce
*ce
= &fl
->centries
[fl
->cidx
];
1104 struct sk_buff
*skb
= ce
->skb
;
1106 pci_dma_sync_single_for_cpu(adapter
->pdev
, pci_unmap_addr(ce
, dma_addr
),
1107 pci_unmap_len(ce
, dma_len
), PCI_DMA_FROMDEVICE
);
1108 CH_ERR("%s: unexpected offload packet, cmd %u\n",
1109 adapter
->name
, *skb
->data
);
1110 recycle_fl_buf(fl
, fl
->cidx
);
1114 * T1/T2 SGE limits the maximum DMA size per TX descriptor to
1115 * SGE_TX_DESC_MAX_PLEN (16KB). If the PAGE_SIZE is larger than 16KB, the
1116 * stack might send more than SGE_TX_DESC_MAX_PLEN in a contiguous manner.
1117 * Note that the *_large_page_tx_descs stuff will be optimized out when
1118 * PAGE_SIZE <= SGE_TX_DESC_MAX_PLEN.
1120 * compute_large_page_descs() computes how many additional descriptors are
1121 * required to break down the stack's request.
1123 static inline unsigned int compute_large_page_tx_descs(struct sk_buff
*skb
)
1125 unsigned int count
= 0;
1127 if (PAGE_SIZE
> SGE_TX_DESC_MAX_PLEN
) {
1128 unsigned int nfrags
= skb_shinfo(skb
)->nr_frags
;
1129 unsigned int i
, len
= skb
->len
- skb
->data_len
;
1130 while (len
> SGE_TX_DESC_MAX_PLEN
) {
1132 len
-= SGE_TX_DESC_MAX_PLEN
;
1134 for (i
= 0; nfrags
--; i
++) {
1135 skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
1137 while (len
> SGE_TX_DESC_MAX_PLEN
) {
1139 len
-= SGE_TX_DESC_MAX_PLEN
;
1147 * Write a cmdQ entry.
1149 * Since this function writes the 'flags' field, it must not be used to
1150 * write the first cmdQ entry.
1152 static inline void write_tx_desc(struct cmdQ_e
*e
, dma_addr_t mapping
,
1153 unsigned int len
, unsigned int gen
,
1156 if (unlikely(len
> SGE_TX_DESC_MAX_PLEN
))
1158 e
->addr_lo
= (u32
)mapping
;
1159 e
->addr_hi
= (u64
)mapping
>> 32;
1160 e
->len_gen
= V_CMD_LEN(len
) | V_CMD_GEN1(gen
);
1161 e
->flags
= F_CMD_DATAVALID
| V_CMD_EOP(eop
) | V_CMD_GEN2(gen
);
1165 * See comment for previous function.
1167 * write_tx_descs_large_page() writes additional SGE tx descriptors if
1168 * *desc_len exceeds HW's capability.
1170 static inline unsigned int write_large_page_tx_descs(unsigned int pidx
,
1172 struct cmdQ_ce
**ce
,
1174 dma_addr_t
*desc_mapping
,
1175 unsigned int *desc_len
,
1176 unsigned int nfrags
,
1179 if (PAGE_SIZE
> SGE_TX_DESC_MAX_PLEN
) {
1180 struct cmdQ_e
*e1
= *e
;
1181 struct cmdQ_ce
*ce1
= *ce
;
1183 while (*desc_len
> SGE_TX_DESC_MAX_PLEN
) {
1184 *desc_len
-= SGE_TX_DESC_MAX_PLEN
;
1185 write_tx_desc(e1
, *desc_mapping
, SGE_TX_DESC_MAX_PLEN
,
1186 *gen
, nfrags
== 0 && *desc_len
== 0);
1188 pci_unmap_len_set(ce1
, dma_len
, 0);
1189 *desc_mapping
+= SGE_TX_DESC_MAX_PLEN
;
1193 if (++pidx
== q
->size
) {
1208 * Write the command descriptors to transmit the given skb starting at
1209 * descriptor pidx with the given generation.
1211 static inline void write_tx_descs(struct adapter
*adapter
, struct sk_buff
*skb
,
1212 unsigned int pidx
, unsigned int gen
,
1215 dma_addr_t mapping
, desc_mapping
;
1216 struct cmdQ_e
*e
, *e1
;
1218 unsigned int i
, flags
, first_desc_len
, desc_len
,
1219 nfrags
= skb_shinfo(skb
)->nr_frags
;
1221 e
= e1
= &q
->entries
[pidx
];
1222 ce
= &q
->centries
[pidx
];
1224 mapping
= pci_map_single(adapter
->pdev
, skb
->data
,
1225 skb
->len
- skb
->data_len
, PCI_DMA_TODEVICE
);
1227 desc_mapping
= mapping
;
1228 desc_len
= skb
->len
- skb
->data_len
;
1230 flags
= F_CMD_DATAVALID
| F_CMD_SOP
|
1231 V_CMD_EOP(nfrags
== 0 && desc_len
<= SGE_TX_DESC_MAX_PLEN
) |
1233 first_desc_len
= (desc_len
<= SGE_TX_DESC_MAX_PLEN
) ?
1234 desc_len
: SGE_TX_DESC_MAX_PLEN
;
1235 e
->addr_lo
= (u32
)desc_mapping
;
1236 e
->addr_hi
= (u64
)desc_mapping
>> 32;
1237 e
->len_gen
= V_CMD_LEN(first_desc_len
) | V_CMD_GEN1(gen
);
1239 pci_unmap_len_set(ce
, dma_len
, 0);
1241 if (PAGE_SIZE
> SGE_TX_DESC_MAX_PLEN
&&
1242 desc_len
> SGE_TX_DESC_MAX_PLEN
) {
1243 desc_mapping
+= first_desc_len
;
1244 desc_len
-= first_desc_len
;
1247 if (++pidx
== q
->size
) {
1253 pidx
= write_large_page_tx_descs(pidx
, &e1
, &ce
, &gen
,
1254 &desc_mapping
, &desc_len
,
1257 if (likely(desc_len
))
1258 write_tx_desc(e1
, desc_mapping
, desc_len
, gen
,
1263 pci_unmap_addr_set(ce
, dma_addr
, mapping
);
1264 pci_unmap_len_set(ce
, dma_len
, skb
->len
- skb
->data_len
);
1266 for (i
= 0; nfrags
--; i
++) {
1267 skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
1270 if (++pidx
== q
->size
) {
1277 mapping
= pci_map_page(adapter
->pdev
, frag
->page
,
1278 frag
->page_offset
, frag
->size
,
1280 desc_mapping
= mapping
;
1281 desc_len
= frag
->size
;
1283 pidx
= write_large_page_tx_descs(pidx
, &e1
, &ce
, &gen
,
1284 &desc_mapping
, &desc_len
,
1286 if (likely(desc_len
))
1287 write_tx_desc(e1
, desc_mapping
, desc_len
, gen
,
1290 pci_unmap_addr_set(ce
, dma_addr
, mapping
);
1291 pci_unmap_len_set(ce
, dma_len
, frag
->size
);
1299 * Clean up completed Tx buffers.
1301 static inline void reclaim_completed_tx(struct sge
*sge
, struct cmdQ
*q
)
1303 unsigned int reclaim
= q
->processed
- q
->cleaned
;
1306 pr_debug("reclaim_completed_tx processed:%d cleaned:%d\n",
1307 q
->processed
, q
->cleaned
);
1308 free_cmdQ_buffers(sge
, q
, reclaim
);
1309 q
->cleaned
+= reclaim
;
1314 * Called from tasklet. Checks the scheduler for any
1315 * pending skbs that can be sent.
1317 static void restart_sched(unsigned long arg
)
1319 struct sge
*sge
= (struct sge
*) arg
;
1320 struct adapter
*adapter
= sge
->adapter
;
1321 struct cmdQ
*q
= &sge
->cmdQ
[0];
1322 struct sk_buff
*skb
;
1323 unsigned int credits
, queued_skb
= 0;
1325 spin_lock(&q
->lock
);
1326 reclaim_completed_tx(sge
, q
);
1328 credits
= q
->size
- q
->in_use
;
1329 pr_debug("restart_sched credits=%d\n", credits
);
1330 while ((skb
= sched_skb(sge
, NULL
, credits
)) != NULL
) {
1331 unsigned int genbit
, pidx
, count
;
1332 count
= 1 + skb_shinfo(skb
)->nr_frags
;
1333 count
+= compute_large_page_tx_descs(skb
);
1338 if (q
->pidx
>= q
->size
) {
1342 write_tx_descs(adapter
, skb
, pidx
, genbit
, q
);
1343 credits
= q
->size
- q
->in_use
;
1348 clear_bit(CMDQ_STAT_LAST_PKT_DB
, &q
->status
);
1349 if (test_and_set_bit(CMDQ_STAT_RUNNING
, &q
->status
) == 0) {
1350 set_bit(CMDQ_STAT_LAST_PKT_DB
, &q
->status
);
1351 writel(F_CMDQ0_ENABLE
, adapter
->regs
+ A_SG_DOORBELL
);
1354 spin_unlock(&q
->lock
);
1358 * sge_rx - process an ingress ethernet packet
1359 * @sge: the sge structure
1360 * @fl: the free list that contains the packet buffer
1361 * @len: the packet length
1363 * Process an ingress ethernet pakcet and deliver it to the stack.
1365 static void sge_rx(struct sge
*sge
, struct freelQ
*fl
, unsigned int len
)
1367 struct sk_buff
*skb
;
1368 const struct cpl_rx_pkt
*p
;
1369 struct adapter
*adapter
= sge
->adapter
;
1370 struct sge_port_stats
*st
;
1372 skb
= get_packet(adapter
->pdev
, fl
, len
- sge
->rx_pkt_pad
);
1373 if (unlikely(!skb
)) {
1374 sge
->stats
.rx_drops
++;
1378 p
= (const struct cpl_rx_pkt
*) skb
->data
;
1379 if (p
->iff
>= adapter
->params
.nports
) {
1383 __skb_pull(skb
, sizeof(*p
));
1385 st
= per_cpu_ptr(sge
->port_stats
[p
->iff
], smp_processor_id());
1387 skb
->protocol
= eth_type_trans(skb
, adapter
->port
[p
->iff
].dev
);
1388 skb
->dev
->last_rx
= jiffies
;
1389 if ((adapter
->flags
& RX_CSUM_ENABLED
) && p
->csum
== 0xffff &&
1390 skb
->protocol
== htons(ETH_P_IP
) &&
1391 (skb
->data
[9] == IPPROTO_TCP
|| skb
->data
[9] == IPPROTO_UDP
)) {
1393 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1395 skb
->ip_summed
= CHECKSUM_NONE
;
1397 if (unlikely(adapter
->vlan_grp
&& p
->vlan_valid
)) {
1399 #ifdef CONFIG_CHELSIO_T1_NAPI
1400 vlan_hwaccel_receive_skb(skb
, adapter
->vlan_grp
,
1403 vlan_hwaccel_rx(skb
, adapter
->vlan_grp
,
1407 #ifdef CONFIG_CHELSIO_T1_NAPI
1408 netif_receive_skb(skb
);
1416 * Returns true if a command queue has enough available descriptors that
1417 * we can resume Tx operation after temporarily disabling its packet queue.
1419 static inline int enough_free_Tx_descs(const struct cmdQ
*q
)
1421 unsigned int r
= q
->processed
- q
->cleaned
;
1423 return q
->in_use
- r
< (q
->size
>> 1);
1427 * Called when sufficient space has become available in the SGE command queues
1428 * after the Tx packet schedulers have been suspended to restart the Tx path.
1430 static void restart_tx_queues(struct sge
*sge
)
1432 struct adapter
*adap
= sge
->adapter
;
1435 if (!enough_free_Tx_descs(&sge
->cmdQ
[0]))
1438 for_each_port(adap
, i
) {
1439 struct net_device
*nd
= adap
->port
[i
].dev
;
1441 if (test_and_clear_bit(nd
->if_port
, &sge
->stopped_tx_queues
) &&
1442 netif_running(nd
)) {
1443 sge
->stats
.cmdQ_restarted
[2]++;
1444 netif_wake_queue(nd
);
1450 * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0
1453 static unsigned int update_tx_info(struct adapter
*adapter
,
1457 struct sge
*sge
= adapter
->sge
;
1458 struct cmdQ
*cmdq
= &sge
->cmdQ
[0];
1460 cmdq
->processed
+= pr0
;
1461 if (flags
& (F_FL0_ENABLE
| F_FL1_ENABLE
)) {
1463 flags
&= ~(F_FL0_ENABLE
| F_FL1_ENABLE
);
1465 if (flags
& F_CMDQ0_ENABLE
) {
1466 clear_bit(CMDQ_STAT_RUNNING
, &cmdq
->status
);
1468 if (cmdq
->cleaned
+ cmdq
->in_use
!= cmdq
->processed
&&
1469 !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB
, &cmdq
->status
)) {
1470 set_bit(CMDQ_STAT_RUNNING
, &cmdq
->status
);
1471 writel(F_CMDQ0_ENABLE
, adapter
->regs
+ A_SG_DOORBELL
);
1474 tasklet_hi_schedule(&sge
->tx_sched
->sched_tsk
);
1476 flags
&= ~F_CMDQ0_ENABLE
;
1479 if (unlikely(sge
->stopped_tx_queues
!= 0))
1480 restart_tx_queues(sge
);
1486 * Process SGE responses, up to the supplied budget. Returns the number of
1487 * responses processed. A negative budget is effectively unlimited.
1489 static int process_responses(struct adapter
*adapter
, int budget
)
1491 struct sge
*sge
= adapter
->sge
;
1492 struct respQ
*q
= &sge
->respQ
;
1493 struct respQ_e
*e
= &q
->entries
[q
->cidx
];
1495 unsigned int flags
= 0;
1496 unsigned int cmdq_processed
[SGE_CMDQ_N
] = {0, 0};
1498 while (done
< budget
&& e
->GenerationBit
== q
->genbit
) {
1499 flags
|= e
->Qsleeping
;
1501 cmdq_processed
[0] += e
->Cmdq0CreditReturn
;
1502 cmdq_processed
[1] += e
->Cmdq1CreditReturn
;
1504 /* We batch updates to the TX side to avoid cacheline
1505 * ping-pong of TX state information on MP where the sender
1506 * might run on a different CPU than this function...
1508 if (unlikely((flags
& F_CMDQ0_ENABLE
) || cmdq_processed
[0] > 64)) {
1509 flags
= update_tx_info(adapter
, flags
, cmdq_processed
[0]);
1510 cmdq_processed
[0] = 0;
1513 if (unlikely(cmdq_processed
[1] > 16)) {
1514 sge
->cmdQ
[1].processed
+= cmdq_processed
[1];
1515 cmdq_processed
[1] = 0;
1518 if (likely(e
->DataValid
)) {
1519 struct freelQ
*fl
= &sge
->freelQ
[e
->FreelistQid
];
1521 BUG_ON(!e
->Sop
|| !e
->Eop
);
1522 if (unlikely(e
->Offload
))
1523 unexpected_offload(adapter
, fl
);
1525 sge_rx(sge
, fl
, e
->BufferLength
);
1530 * Note: this depends on each packet consuming a
1531 * single free-list buffer; cf. the BUG above.
1533 if (++fl
->cidx
== fl
->size
)
1535 prefetch(fl
->centries
[fl
->cidx
].skb
);
1537 if (unlikely(--fl
->credits
<
1538 fl
->size
- SGE_FREEL_REFILL_THRESH
))
1539 refill_free_list(sge
, fl
);
1541 sge
->stats
.pure_rsps
++;
1544 if (unlikely(++q
->cidx
== q
->size
)) {
1551 if (++q
->credits
> SGE_RESPQ_REPLENISH_THRES
) {
1552 writel(q
->credits
, adapter
->regs
+ A_SG_RSPQUEUECREDIT
);
1557 flags
= update_tx_info(adapter
, flags
, cmdq_processed
[0]);
1558 sge
->cmdQ
[1].processed
+= cmdq_processed
[1];
1563 static inline int responses_pending(const struct adapter
*adapter
)
1565 const struct respQ
*Q
= &adapter
->sge
->respQ
;
1566 const struct respQ_e
*e
= &Q
->entries
[Q
->cidx
];
1568 return (e
->GenerationBit
== Q
->genbit
);
1571 #ifdef CONFIG_CHELSIO_T1_NAPI
1573 * A simpler version of process_responses() that handles only pure (i.e.,
1574 * non data-carrying) responses. Such respones are too light-weight to justify
1575 * calling a softirq when using NAPI, so we handle them specially in hard
1576 * interrupt context. The function is called with a pointer to a response,
1577 * which the caller must ensure is a valid pure response. Returns 1 if it
1578 * encounters a valid data-carrying response, 0 otherwise.
1580 static int process_pure_responses(struct adapter
*adapter
)
1582 struct sge
*sge
= adapter
->sge
;
1583 struct respQ
*q
= &sge
->respQ
;
1584 struct respQ_e
*e
= &q
->entries
[q
->cidx
];
1585 const struct freelQ
*fl
= &sge
->freelQ
[e
->FreelistQid
];
1586 unsigned int flags
= 0;
1587 unsigned int cmdq_processed
[SGE_CMDQ_N
] = {0, 0};
1589 prefetch(fl
->centries
[fl
->cidx
].skb
);
1594 flags
|= e
->Qsleeping
;
1596 cmdq_processed
[0] += e
->Cmdq0CreditReturn
;
1597 cmdq_processed
[1] += e
->Cmdq1CreditReturn
;
1600 if (unlikely(++q
->cidx
== q
->size
)) {
1607 if (++q
->credits
> SGE_RESPQ_REPLENISH_THRES
) {
1608 writel(q
->credits
, adapter
->regs
+ A_SG_RSPQUEUECREDIT
);
1611 sge
->stats
.pure_rsps
++;
1612 } while (e
->GenerationBit
== q
->genbit
&& !e
->DataValid
);
1614 flags
= update_tx_info(adapter
, flags
, cmdq_processed
[0]);
1615 sge
->cmdQ
[1].processed
+= cmdq_processed
[1];
1617 return e
->GenerationBit
== q
->genbit
;
1621 * Handler for new data events when using NAPI. This does not need any locking
1622 * or protection from interrupts as data interrupts are off at this point and
1623 * other adapter interrupts do not interfere.
1625 int t1_poll(struct napi_struct
*napi
, int budget
)
1627 struct adapter
*adapter
= container_of(napi
, struct adapter
, napi
);
1628 struct net_device
*dev
= adapter
->port
[0].dev
;
1629 int work_done
= process_responses(adapter
, budget
);
1631 if (likely(work_done
< budget
)) {
1632 netif_rx_complete(dev
, napi
);
1633 writel(adapter
->sge
->respQ
.cidx
,
1634 adapter
->regs
+ A_SG_SLEEPING
);
1640 * NAPI version of the main interrupt handler.
1642 irqreturn_t
t1_interrupt(int irq
, void *data
)
1644 struct adapter
*adapter
= data
;
1645 struct sge
*sge
= adapter
->sge
;
1648 if (likely(responses_pending(adapter
))) {
1649 struct net_device
*dev
= sge
->netdev
;
1651 writel(F_PL_INTR_SGE_DATA
, adapter
->regs
+ A_PL_CAUSE
);
1653 if (napi_schedule_prep(&adapter
->napi
)) {
1654 if (process_pure_responses(adapter
))
1655 __netif_rx_schedule(dev
, &adapter
->napi
);
1657 /* no data, no NAPI needed */
1658 writel(sge
->respQ
.cidx
, adapter
->regs
+ A_SG_SLEEPING
);
1659 napi_enable(&adapter
->napi
); /* undo schedule_prep */
1665 spin_lock(&adapter
->async_lock
);
1666 handled
= t1_slow_intr_handler(adapter
);
1667 spin_unlock(&adapter
->async_lock
);
1670 sge
->stats
.unhandled_irqs
++;
1672 return IRQ_RETVAL(handled
!= 0);
1677 * Main interrupt handler, optimized assuming that we took a 'DATA'
1680 * 1. Clear the interrupt
1681 * 2. Loop while we find valid descriptors and process them; accumulate
1682 * information that can be processed after the loop
1683 * 3. Tell the SGE at which index we stopped processing descriptors
1684 * 4. Bookkeeping; free TX buffers, ring doorbell if there are any
1685 * outstanding TX buffers waiting, replenish RX buffers, potentially
1686 * reenable upper layers if they were turned off due to lack of TX
1687 * resources which are available again.
1688 * 5. If we took an interrupt, but no valid respQ descriptors was found we
1689 * let the slow_intr_handler run and do error handling.
1691 irqreturn_t
t1_interrupt(int irq
, void *cookie
)
1694 struct adapter
*adapter
= cookie
;
1695 struct respQ
*Q
= &adapter
->sge
->respQ
;
1697 spin_lock(&adapter
->async_lock
);
1699 writel(F_PL_INTR_SGE_DATA
, adapter
->regs
+ A_PL_CAUSE
);
1701 if (likely(responses_pending(adapter
)))
1702 work_done
= process_responses(adapter
, -1);
1704 work_done
= t1_slow_intr_handler(adapter
);
1707 * The unconditional clearing of the PL_CAUSE above may have raced
1708 * with DMA completion and the corresponding generation of a response
1709 * to cause us to miss the resulting data interrupt. The next write
1710 * is also unconditional to recover the missed interrupt and render
1711 * this race harmless.
1713 writel(Q
->cidx
, adapter
->regs
+ A_SG_SLEEPING
);
1716 adapter
->sge
->stats
.unhandled_irqs
++;
1717 spin_unlock(&adapter
->async_lock
);
1718 return IRQ_RETVAL(work_done
!= 0);
1723 * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
1725 * The code figures out how many entries the sk_buff will require in the
1726 * cmdQ and updates the cmdQ data structure with the state once the enqueue
1727 * has complete. Then, it doesn't access the global structure anymore, but
1728 * uses the corresponding fields on the stack. In conjuction with a spinlock
1729 * around that code, we can make the function reentrant without holding the
1730 * lock when we actually enqueue (which might be expensive, especially on
1731 * architectures with IO MMUs).
1733 * This runs with softirqs disabled.
1735 static int t1_sge_tx(struct sk_buff
*skb
, struct adapter
*adapter
,
1736 unsigned int qid
, struct net_device
*dev
)
1738 struct sge
*sge
= adapter
->sge
;
1739 struct cmdQ
*q
= &sge
->cmdQ
[qid
];
1740 unsigned int credits
, pidx
, genbit
, count
, use_sched_skb
= 0;
1742 if (!spin_trylock(&q
->lock
))
1743 return NETDEV_TX_LOCKED
;
1745 reclaim_completed_tx(sge
, q
);
1748 credits
= q
->size
- q
->in_use
;
1749 count
= 1 + skb_shinfo(skb
)->nr_frags
;
1750 count
+= compute_large_page_tx_descs(skb
);
1752 /* Ethernet packet */
1753 if (unlikely(credits
< count
)) {
1754 if (!netif_queue_stopped(dev
)) {
1755 netif_stop_queue(dev
);
1756 set_bit(dev
->if_port
, &sge
->stopped_tx_queues
);
1757 sge
->stats
.cmdQ_full
[2]++;
1758 CH_ERR("%s: Tx ring full while queue awake!\n",
1761 spin_unlock(&q
->lock
);
1762 return NETDEV_TX_BUSY
;
1765 if (unlikely(credits
- count
< q
->stop_thres
)) {
1766 netif_stop_queue(dev
);
1767 set_bit(dev
->if_port
, &sge
->stopped_tx_queues
);
1768 sge
->stats
.cmdQ_full
[2]++;
1771 /* T204 cmdQ0 skbs that are destined for a certain port have to go
1772 * through the scheduler.
1774 if (sge
->tx_sched
&& !qid
&& skb
->dev
) {
1777 /* Note that the scheduler might return a different skb than
1778 * the one passed in.
1780 skb
= sched_skb(sge
, skb
, credits
);
1782 spin_unlock(&q
->lock
);
1783 return NETDEV_TX_OK
;
1786 count
= 1 + skb_shinfo(skb
)->nr_frags
;
1787 count
+= compute_large_page_tx_descs(skb
);
1794 if (q
->pidx
>= q
->size
) {
1798 spin_unlock(&q
->lock
);
1800 write_tx_descs(adapter
, skb
, pidx
, genbit
, q
);
1803 * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring
1804 * the doorbell if the Q is asleep. There is a natural race, where
1805 * the hardware is going to sleep just after we checked, however,
1806 * then the interrupt handler will detect the outstanding TX packet
1807 * and ring the doorbell for us.
1810 doorbell_pio(adapter
, F_CMDQ1_ENABLE
);
1812 clear_bit(CMDQ_STAT_LAST_PKT_DB
, &q
->status
);
1813 if (test_and_set_bit(CMDQ_STAT_RUNNING
, &q
->status
) == 0) {
1814 set_bit(CMDQ_STAT_LAST_PKT_DB
, &q
->status
);
1815 writel(F_CMDQ0_ENABLE
, adapter
->regs
+ A_SG_DOORBELL
);
1819 if (use_sched_skb
) {
1820 if (spin_trylock(&q
->lock
)) {
1821 credits
= q
->size
- q
->in_use
;
1826 return NETDEV_TX_OK
;
1829 #define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14))
1832 * eth_hdr_len - return the length of an Ethernet header
1833 * @data: pointer to the start of the Ethernet header
1835 * Returns the length of an Ethernet header, including optional VLAN tag.
1837 static inline int eth_hdr_len(const void *data
)
1839 const struct ethhdr
*e
= data
;
1841 return e
->h_proto
== htons(ETH_P_8021Q
) ? VLAN_ETH_HLEN
: ETH_HLEN
;
1845 * Adds the CPL header to the sk_buff and passes it to t1_sge_tx.
1847 int t1_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1849 struct adapter
*adapter
= dev
->priv
;
1850 struct sge
*sge
= adapter
->sge
;
1851 struct sge_port_stats
*st
= per_cpu_ptr(sge
->port_stats
[dev
->if_port
],
1852 smp_processor_id());
1853 struct cpl_tx_pkt
*cpl
;
1854 struct sk_buff
*orig_skb
= skb
;
1857 if (skb
->protocol
== htons(ETH_P_CPL5
))
1861 * We are using a non-standard hard_header_len.
1862 * Allocate more header room in the rare cases it is not big enough.
1864 if (unlikely(skb_headroom(skb
) < dev
->hard_header_len
- ETH_HLEN
)) {
1865 skb
= skb_realloc_headroom(skb
, sizeof(struct cpl_tx_pkt_lso
));
1866 ++st
->tx_need_hdrroom
;
1867 dev_kfree_skb_any(orig_skb
);
1869 return NETDEV_TX_OK
;
1872 if (skb_shinfo(skb
)->gso_size
) {
1874 struct cpl_tx_pkt_lso
*hdr
;
1878 eth_type
= skb_network_offset(skb
) == ETH_HLEN
?
1879 CPL_ETH_II
: CPL_ETH_II_VLAN
;
1881 hdr
= (struct cpl_tx_pkt_lso
*)skb_push(skb
, sizeof(*hdr
));
1882 hdr
->opcode
= CPL_TX_PKT_LSO
;
1883 hdr
->ip_csum_dis
= hdr
->l4_csum_dis
= 0;
1884 hdr
->ip_hdr_words
= ip_hdr(skb
)->ihl
;
1885 hdr
->tcp_hdr_words
= tcp_hdr(skb
)->doff
;
1886 hdr
->eth_type_mss
= htons(MK_ETH_TYPE_MSS(eth_type
,
1887 skb_shinfo(skb
)->gso_size
));
1888 hdr
->len
= htonl(skb
->len
- sizeof(*hdr
));
1889 cpl
= (struct cpl_tx_pkt
*)hdr
;
1892 * Packets shorter than ETH_HLEN can break the MAC, drop them
1893 * early. Also, we may get oversized packets because some
1894 * parts of the kernel don't handle our unusual hard_header_len
1895 * right, drop those too.
1897 if (unlikely(skb
->len
< ETH_HLEN
||
1898 skb
->len
> dev
->mtu
+ eth_hdr_len(skb
->data
))) {
1899 pr_debug("%s: packet size %d hdr %d mtu%d\n", dev
->name
,
1900 skb
->len
, eth_hdr_len(skb
->data
), dev
->mtu
);
1901 dev_kfree_skb_any(skb
);
1902 return NETDEV_TX_OK
;
1905 if (!(adapter
->flags
& UDP_CSUM_CAPABLE
) &&
1906 skb
->ip_summed
== CHECKSUM_PARTIAL
&&
1907 ip_hdr(skb
)->protocol
== IPPROTO_UDP
) {
1908 if (unlikely(skb_checksum_help(skb
))) {
1909 pr_debug("%s: unable to do udp checksum\n", dev
->name
);
1910 dev_kfree_skb_any(skb
);
1911 return NETDEV_TX_OK
;
1915 /* Hmmm, assuming to catch the gratious arp... and we'll use
1916 * it to flush out stuck espi packets...
1918 if ((unlikely(!adapter
->sge
->espibug_skb
[dev
->if_port
]))) {
1919 if (skb
->protocol
== htons(ETH_P_ARP
) &&
1920 arp_hdr(skb
)->ar_op
== htons(ARPOP_REQUEST
)) {
1921 adapter
->sge
->espibug_skb
[dev
->if_port
] = skb
;
1922 /* We want to re-use this skb later. We
1923 * simply bump the reference count and it
1924 * will not be freed...
1930 cpl
= (struct cpl_tx_pkt
*)__skb_push(skb
, sizeof(*cpl
));
1931 cpl
->opcode
= CPL_TX_PKT
;
1932 cpl
->ip_csum_dis
= 1; /* SW calculates IP csum */
1933 cpl
->l4_csum_dis
= skb
->ip_summed
== CHECKSUM_PARTIAL
? 0 : 1;
1934 /* the length field isn't used so don't bother setting it */
1936 st
->tx_cso
+= (skb
->ip_summed
== CHECKSUM_PARTIAL
);
1938 cpl
->iff
= dev
->if_port
;
1940 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
1941 if (adapter
->vlan_grp
&& vlan_tx_tag_present(skb
)) {
1942 cpl
->vlan_valid
= 1;
1943 cpl
->vlan
= htons(vlan_tx_tag_get(skb
));
1947 cpl
->vlan_valid
= 0;
1950 dev
->trans_start
= jiffies
;
1951 ret
= t1_sge_tx(skb
, adapter
, 0, dev
);
1953 /* If transmit busy, and we reallocated skb's due to headroom limit,
1954 * then silently discard to avoid leak.
1956 if (unlikely(ret
!= NETDEV_TX_OK
&& skb
!= orig_skb
)) {
1957 dev_kfree_skb_any(skb
);
1964 * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled.
1966 static void sge_tx_reclaim_cb(unsigned long data
)
1969 struct sge
*sge
= (struct sge
*)data
;
1971 for (i
= 0; i
< SGE_CMDQ_N
; ++i
) {
1972 struct cmdQ
*q
= &sge
->cmdQ
[i
];
1974 if (!spin_trylock(&q
->lock
))
1977 reclaim_completed_tx(sge
, q
);
1978 if (i
== 0 && q
->in_use
) { /* flush pending credits */
1979 writel(F_CMDQ0_ENABLE
, sge
->adapter
->regs
+ A_SG_DOORBELL
);
1981 spin_unlock(&q
->lock
);
1983 mod_timer(&sge
->tx_reclaim_timer
, jiffies
+ TX_RECLAIM_PERIOD
);
1987 * Propagate changes of the SGE coalescing parameters to the HW.
1989 int t1_sge_set_coalesce_params(struct sge
*sge
, struct sge_params
*p
)
1991 sge
->fixed_intrtimer
= p
->rx_coalesce_usecs
*
1992 core_ticks_per_usec(sge
->adapter
);
1993 writel(sge
->fixed_intrtimer
, sge
->adapter
->regs
+ A_SG_INTRTIMER
);
1998 * Allocates both RX and TX resources and configures the SGE. However,
1999 * the hardware is not enabled yet.
2001 int t1_sge_configure(struct sge
*sge
, struct sge_params
*p
)
2003 if (alloc_rx_resources(sge
, p
))
2005 if (alloc_tx_resources(sge
, p
)) {
2006 free_rx_resources(sge
);
2009 configure_sge(sge
, p
);
2012 * Now that we have sized the free lists calculate the payload
2013 * capacity of the large buffers. Other parts of the driver use
2014 * this to set the max offload coalescing size so that RX packets
2015 * do not overflow our large buffers.
2017 p
->large_buf_capacity
= jumbo_payload_capacity(sge
);
2022 * Disables the DMA engine.
2024 void t1_sge_stop(struct sge
*sge
)
2027 writel(0, sge
->adapter
->regs
+ A_SG_CONTROL
);
2028 readl(sge
->adapter
->regs
+ A_SG_CONTROL
); /* flush */
2030 if (is_T2(sge
->adapter
))
2031 del_timer_sync(&sge
->espibug_timer
);
2033 del_timer_sync(&sge
->tx_reclaim_timer
);
2037 for (i
= 0; i
< MAX_NPORTS
; i
++)
2038 if (sge
->espibug_skb
[i
])
2039 kfree_skb(sge
->espibug_skb
[i
]);
2043 * Enables the DMA engine.
2045 void t1_sge_start(struct sge
*sge
)
2047 refill_free_list(sge
, &sge
->freelQ
[0]);
2048 refill_free_list(sge
, &sge
->freelQ
[1]);
2050 writel(sge
->sge_control
, sge
->adapter
->regs
+ A_SG_CONTROL
);
2051 doorbell_pio(sge
->adapter
, F_FL0_ENABLE
| F_FL1_ENABLE
);
2052 readl(sge
->adapter
->regs
+ A_SG_CONTROL
); /* flush */
2054 mod_timer(&sge
->tx_reclaim_timer
, jiffies
+ TX_RECLAIM_PERIOD
);
2056 if (is_T2(sge
->adapter
))
2057 mod_timer(&sge
->espibug_timer
, jiffies
+ sge
->espibug_timeout
);
2061 * Callback for the T2 ESPI 'stuck packet feature' workaorund
2063 static void espibug_workaround_t204(unsigned long data
)
2065 struct adapter
*adapter
= (struct adapter
*)data
;
2066 struct sge
*sge
= adapter
->sge
;
2067 unsigned int nports
= adapter
->params
.nports
;
2068 u32 seop
[MAX_NPORTS
];
2070 if (adapter
->open_device_map
& PORT_MASK
) {
2073 if (t1_espi_get_mon_t204(adapter
, &(seop
[0]), 0) < 0)
2076 for (i
= 0; i
< nports
; i
++) {
2077 struct sk_buff
*skb
= sge
->espibug_skb
[i
];
2079 if (!netif_running(adapter
->port
[i
].dev
) ||
2080 netif_queue_stopped(adapter
->port
[i
].dev
) ||
2081 !seop
[i
] || ((seop
[i
] & 0xfff) != 0) || !skb
)
2085 u8 ch_mac_addr
[ETH_ALEN
] = {
2086 0x0, 0x7, 0x43, 0x0, 0x0, 0x0
2089 skb_copy_to_linear_data_offset(skb
,
2090 sizeof(struct cpl_tx_pkt
),
2093 skb_copy_to_linear_data_offset(skb
,
2100 /* bump the reference count to avoid freeing of
2101 * the skb once the DMA has completed.
2104 t1_sge_tx(skb
, adapter
, 0, adapter
->port
[i
].dev
);
2107 mod_timer(&sge
->espibug_timer
, jiffies
+ sge
->espibug_timeout
);
2110 static void espibug_workaround(unsigned long data
)
2112 struct adapter
*adapter
= (struct adapter
*)data
;
2113 struct sge
*sge
= adapter
->sge
;
2115 if (netif_running(adapter
->port
[0].dev
)) {
2116 struct sk_buff
*skb
= sge
->espibug_skb
[0];
2117 u32 seop
= t1_espi_get_mon(adapter
, 0x930, 0);
2119 if ((seop
& 0xfff0fff) == 0xfff && skb
) {
2121 u8 ch_mac_addr
[ETH_ALEN
] =
2122 {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
2123 skb_copy_to_linear_data_offset(skb
,
2124 sizeof(struct cpl_tx_pkt
),
2127 skb_copy_to_linear_data_offset(skb
,
2134 /* bump the reference count to avoid freeing of the
2135 * skb once the DMA has completed.
2138 t1_sge_tx(skb
, adapter
, 0, adapter
->port
[0].dev
);
2141 mod_timer(&sge
->espibug_timer
, jiffies
+ sge
->espibug_timeout
);
2145 * Creates a t1_sge structure and returns suggested resource parameters.
2147 struct sge
* __devinit
t1_sge_create(struct adapter
*adapter
,
2148 struct sge_params
*p
)
2150 struct sge
*sge
= kzalloc(sizeof(*sge
), GFP_KERNEL
);
2156 sge
->adapter
= adapter
;
2157 sge
->netdev
= adapter
->port
[0].dev
;
2158 sge
->rx_pkt_pad
= t1_is_T1B(adapter
) ? 0 : 2;
2159 sge
->jumbo_fl
= t1_is_T1B(adapter
) ? 1 : 0;
2161 for_each_port(adapter
, i
) {
2162 sge
->port_stats
[i
] = alloc_percpu(struct sge_port_stats
);
2163 if (!sge
->port_stats
[i
])
2167 init_timer(&sge
->tx_reclaim_timer
);
2168 sge
->tx_reclaim_timer
.data
= (unsigned long)sge
;
2169 sge
->tx_reclaim_timer
.function
= sge_tx_reclaim_cb
;
2171 if (is_T2(sge
->adapter
)) {
2172 init_timer(&sge
->espibug_timer
);
2174 if (adapter
->params
.nports
> 1) {
2176 sge
->espibug_timer
.function
= espibug_workaround_t204
;
2178 sge
->espibug_timer
.function
= espibug_workaround
;
2179 sge
->espibug_timer
.data
= (unsigned long)sge
->adapter
;
2181 sge
->espibug_timeout
= 1;
2182 /* for T204, every 10ms */
2183 if (adapter
->params
.nports
> 1)
2184 sge
->espibug_timeout
= HZ
/100;
2188 p
->cmdQ_size
[0] = SGE_CMDQ0_E_N
;
2189 p
->cmdQ_size
[1] = SGE_CMDQ1_E_N
;
2190 p
->freelQ_size
[!sge
->jumbo_fl
] = SGE_FREEL_SIZE
;
2191 p
->freelQ_size
[sge
->jumbo_fl
] = SGE_JUMBO_FREEL_SIZE
;
2192 if (sge
->tx_sched
) {
2193 if (board_info(sge
->adapter
)->board
== CHBT_BOARD_CHT204
)
2194 p
->rx_coalesce_usecs
= 15;
2196 p
->rx_coalesce_usecs
= 50;
2198 p
->rx_coalesce_usecs
= 50;
2200 p
->coalesce_enable
= 0;
2201 p
->sample_interval_usecs
= 0;
2206 free_percpu(sge
->port_stats
[i
]);