drivers/net/ixp2000/caleb.c

   1 /*
   2  * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
   3  * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
   4  * Dedicated to Marija Kulikova.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/delay.h>
  14 #include <asm/io.h>
  15 #include "caleb.h"
  16
  17 #define CALEB_IDLO              0x00
  18 #define CALEB_IDHI              0x01
  19 #define CALEB_RID               0x02
  20 #define CALEB_RESET             0x03
  21 #define CALEB_INTREN0           0x04
  22 #define CALEB_INTREN1           0x05
  23 #define CALEB_INTRSTAT0         0x06
  24 #define CALEB_INTRSTAT1         0x07
  25 #define CALEB_PORTEN            0x08
  26 #define CALEB_BURST             0x09
  27 #define CALEB_PORTPAUS          0x0A
  28 #define CALEB_PORTPAUSD         0x0B
  29 #define CALEB_PHY0RX            0x10
  30 #define CALEB_PHY1RX            0x11
  31 #define CALEB_PHY0TX            0x12
  32 #define CALEB_PHY1TX            0x13
  33 #define CALEB_IXPRX_HI_CNTR     0x15
  34 #define CALEB_PHY0RX_HI_CNTR    0x16
  35 #define CALEB_PHY1RX_HI_CNTR    0x17
  36 #define CALEB_IXPRX_CNTR        0x18
  37 #define CALEB_PHY0RX_CNTR       0x19
  38 #define CALEB_PHY1RX_CNTR       0x1A
  39 #define CALEB_IXPTX_CNTR        0x1B
  40 #define CALEB_PHY0TX_CNTR       0x1C
  41 #define CALEB_PHY1TX_CNTR       0x1D
  42 #define CALEB_DEBUG0            0x1E
  43 #define CALEB_DEBUG1            0x1F
  44
  45
  46 static u8 caleb_reg_read(int reg)
  47 {
  48         u8 value;
  49
  50         value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
  51
  52 //      printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
  53
  54         return value;
  55 }
  56
  57 static void caleb_reg_write(int reg, u8 value)
  58 {
  59         u8 dummy;
  60
  61 //      printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
  62
  63         *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
  64
  65         dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
  66         __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
  67 }
  68
  69
  70 void caleb_reset(void)
  71 {
  72         /*
  73          * Perform a chip reset.
  74          */
  75         caleb_reg_write(CALEB_RESET, 0x02);
  76         udelay(1);
  77
  78         /*
  79          * Enable all interrupt sources.  This is needed to get
  80          * meaningful results out of the status bits (register 6
  81          * and 7.)
  82          */
  83         caleb_reg_write(CALEB_INTREN0, 0xff);
  84         caleb_reg_write(CALEB_INTREN1, 0x07);
  85
  86         /*
  87          * Set RX and TX FIFO thresholds to 1.5kb.
  88          */
  89         caleb_reg_write(CALEB_PHY0RX, 0x11);
  90         caleb_reg_write(CALEB_PHY1RX, 0x11);
  91         caleb_reg_write(CALEB_PHY0TX, 0x11);
  92         caleb_reg_write(CALEB_PHY1TX, 0x11);
  93
  94         /*
  95          * Program SPI-3 burst size.
  96          */
  97         caleb_reg_write(CALEB_BURST, 0);        // 64-byte RBUF mpackets
  98 //      caleb_reg_write(CALEB_BURST, 1);        // 128-byte RBUF mpackets
  99 //      caleb_reg_write(CALEB_BURST, 2);        // 256-byte RBUF mpackets
 100 }
 101
 102 void caleb_enable_rx(int port)
 103 {
 104         u8 temp;
 105
 106         temp = caleb_reg_read(CALEB_PORTEN);
 107         temp |= 1 << port;
 108         caleb_reg_write(CALEB_PORTEN, temp);
 109 }
 110
 111 void caleb_disable_rx(int port)
 112 {
 113         u8 temp;
 114
 115         temp = caleb_reg_read(CALEB_PORTEN);
 116         temp &= ~(1 << port);
 117         caleb_reg_write(CALEB_PORTEN, temp);
 118 }
 119
 120 void caleb_enable_tx(int port)
 121 {
 122         u8 temp;
 123
 124         temp = caleb_reg_read(CALEB_PORTEN);
 125         temp |= 1 << (port + 4);
 126         caleb_reg_write(CALEB_PORTEN, temp);
 127 }
 128
 129 void caleb_disable_tx(int port)
 130 {
 131         u8 temp;
 132
 133         temp = caleb_reg_read(CALEB_PORTEN);
 134         temp &= ~(1 << (port + 4));
 135         caleb_reg_write(CALEB_PORTEN, temp);
 136 }