ia64/kvm: compilation fix. export account_system_vtime.
[pv_ops_mirror.git] / drivers / net / wireless / hostap / hostap_plx.c
blobcbf15d703201f15dc323bffcd9461fd974fb4e1f
1 #define PRISM2_PLX
3 /* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is
4 * based on:
5 * - Host AP driver patch from james@madingley.org
6 * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc.
7 */
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/if.h>
13 #include <linux/skbuff.h>
14 #include <linux/netdevice.h>
15 #include <linux/workqueue.h>
16 #include <linux/wireless.h>
17 #include <net/iw_handler.h>
19 #include <linux/ioport.h>
20 #include <linux/pci.h>
21 #include <asm/io.h>
23 #include "hostap_wlan.h"
26 static char *dev_info = "hostap_plx";
29 MODULE_AUTHOR("Jouni Malinen");
30 MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
31 "cards (PLX).");
32 MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)");
33 MODULE_LICENSE("GPL");
36 static int ignore_cis;
37 module_param(ignore_cis, int, 0444);
38 MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS");
41 /* struct local_info::hw_priv */
42 struct hostap_plx_priv {
43 void __iomem *attr_mem;
44 unsigned int cor_offset;
48 #define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */
49 #define COR_SRESET 0x80
50 #define COR_LEVLREQ 0x40
51 #define COR_ENABLE_FUNC 0x01
52 /* PCI Configuration Registers */
53 #define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */
54 /* Local Configuration Registers */
55 #define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */
56 #define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */
57 #define PLX_CNTRL 0x50
58 #define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28)
61 #define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID }
63 static struct pci_device_id prism2_plx_id_table[] __devinitdata = {
64 PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"),
65 PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"),
66 PLXDEV(0x126c, 0x8030, "Nortel emobility"),
67 PLXDEV(0x1562, 0x0001, "Symbol LA-4123"),
68 PLXDEV(0x1385, 0x4100, "Netgear MA301"),
69 PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"),
70 PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"),
71 PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"),
72 PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"),
73 PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"),
74 PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"),
75 PLXDEV(0x16ab, 0x1103, "Longshine 8031"),
76 PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"),
77 PLXDEV(0xec80, 0xec00, "Belkin F5D6000"),
78 { 0 }
82 /* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid
83 * is not listed here, you will need to add it here to get the driver
84 * initialized. */
85 static struct prism2_plx_manfid {
86 u16 manfid1, manfid2;
87 } prism2_plx_known_manfids[] = {
88 { 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */,
89 { 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */,
90 { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */,
91 { 0x0126, 0x8000 } /* Proxim RangeLAN */,
92 { 0x0138, 0x0002 } /* Compaq WL100 */,
93 { 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */,
94 { 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */,
95 { 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */,
96 { 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */,
97 { 0x028a, 0x0002 } /* D-Link DRC-650 */,
98 { 0x0250, 0x0002 } /* Samsung SWL2000-N */,
99 { 0xc250, 0x0002 } /* EMTAC A2424i */,
100 { 0xd601, 0x0002 } /* Z-Com XI300 */,
101 { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
102 { 0, 0}
106 #ifdef PRISM2_IO_DEBUG
108 static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
110 struct hostap_interface *iface;
111 local_info_t *local;
112 unsigned long flags;
114 iface = netdev_priv(dev);
115 local = iface->local;
117 spin_lock_irqsave(&local->lock, flags);
118 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
119 outb(v, dev->base_addr + a);
120 spin_unlock_irqrestore(&local->lock, flags);
123 static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
125 struct hostap_interface *iface;
126 local_info_t *local;
127 unsigned long flags;
128 u8 v;
130 iface = netdev_priv(dev);
131 local = iface->local;
133 spin_lock_irqsave(&local->lock, flags);
134 v = inb(dev->base_addr + a);
135 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
136 spin_unlock_irqrestore(&local->lock, flags);
137 return v;
140 static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
142 struct hostap_interface *iface;
143 local_info_t *local;
144 unsigned long flags;
146 iface = netdev_priv(dev);
147 local = iface->local;
149 spin_lock_irqsave(&local->lock, flags);
150 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
151 outw(v, dev->base_addr + a);
152 spin_unlock_irqrestore(&local->lock, flags);
155 static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
157 struct hostap_interface *iface;
158 local_info_t *local;
159 unsigned long flags;
160 u16 v;
162 iface = netdev_priv(dev);
163 local = iface->local;
165 spin_lock_irqsave(&local->lock, flags);
166 v = inw(dev->base_addr + a);
167 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
168 spin_unlock_irqrestore(&local->lock, flags);
169 return v;
172 static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
173 u8 *buf, int wc)
175 struct hostap_interface *iface;
176 local_info_t *local;
177 unsigned long flags;
179 iface = netdev_priv(dev);
180 local = iface->local;
182 spin_lock_irqsave(&local->lock, flags);
183 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
184 outsw(dev->base_addr + a, buf, wc);
185 spin_unlock_irqrestore(&local->lock, flags);
188 static inline void hfa384x_insw_debug(struct net_device *dev, int a,
189 u8 *buf, int wc)
191 struct hostap_interface *iface;
192 local_info_t *local;
193 unsigned long flags;
195 iface = netdev_priv(dev);
196 local = iface->local;
198 spin_lock_irqsave(&local->lock, flags);
199 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
200 insw(dev->base_addr + a, buf, wc);
201 spin_unlock_irqrestore(&local->lock, flags);
204 #define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
205 #define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
206 #define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
207 #define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
208 #define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
209 #define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
211 #else /* PRISM2_IO_DEBUG */
213 #define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
214 #define HFA384X_INB(a) inb(dev->base_addr + (a))
215 #define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
216 #define HFA384X_INW(a) inw(dev->base_addr + (a))
217 #define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
218 #define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
220 #endif /* PRISM2_IO_DEBUG */
223 static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
224 int len)
226 u16 d_off;
227 u16 *pos;
229 d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
230 pos = (u16 *) buf;
232 if (len / 2)
233 HFA384X_INSW(d_off, buf, len / 2);
234 pos += len / 2;
236 if (len & 1)
237 *((char *) pos) = HFA384X_INB(d_off);
239 return 0;
243 static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
245 u16 d_off;
246 u16 *pos;
248 d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
249 pos = (u16 *) buf;
251 if (len / 2)
252 HFA384X_OUTSW(d_off, buf, len / 2);
253 pos += len / 2;
255 if (len & 1)
256 HFA384X_OUTB(*((char *) pos), d_off);
258 return 0;
262 /* FIX: This might change at some point.. */
263 #include "hostap_hw.c"
266 static void prism2_plx_cor_sreset(local_info_t *local)
268 unsigned char corsave;
269 struct hostap_plx_priv *hw_priv = local->hw_priv;
271 printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n",
272 dev_info);
274 /* Set sreset bit of COR and clear it after hold time */
276 if (hw_priv->attr_mem == NULL) {
277 /* TMD7160 - COR at card's first I/O addr */
278 corsave = inb(hw_priv->cor_offset);
279 outb(corsave | COR_SRESET, hw_priv->cor_offset);
280 mdelay(2);
281 outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
282 mdelay(2);
283 } else {
284 /* PLX9052 */
285 corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
286 writeb(corsave | COR_SRESET,
287 hw_priv->attr_mem + hw_priv->cor_offset);
288 mdelay(2);
289 writeb(corsave & ~COR_SRESET,
290 hw_priv->attr_mem + hw_priv->cor_offset);
291 mdelay(2);
296 static void prism2_plx_genesis_reset(local_info_t *local, int hcr)
298 unsigned char corsave;
299 struct hostap_plx_priv *hw_priv = local->hw_priv;
301 if (hw_priv->attr_mem == NULL) {
302 /* TMD7160 - COR at card's first I/O addr */
303 corsave = inb(hw_priv->cor_offset);
304 outb(corsave | COR_SRESET, hw_priv->cor_offset);
305 mdelay(10);
306 outb(hcr, hw_priv->cor_offset + 2);
307 mdelay(10);
308 outb(corsave & ~COR_SRESET, hw_priv->cor_offset);
309 mdelay(10);
310 } else {
311 /* PLX9052 */
312 corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset);
313 writeb(corsave | COR_SRESET,
314 hw_priv->attr_mem + hw_priv->cor_offset);
315 mdelay(10);
316 writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2);
317 mdelay(10);
318 writeb(corsave & ~COR_SRESET,
319 hw_priv->attr_mem + hw_priv->cor_offset);
320 mdelay(10);
325 static struct prism2_helper_functions prism2_plx_funcs =
327 .card_present = NULL,
328 .cor_sreset = prism2_plx_cor_sreset,
329 .genesis_reset = prism2_plx_genesis_reset,
330 .hw_type = HOSTAP_HW_PLX,
334 static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len,
335 unsigned int *cor_offset,
336 unsigned int *cor_index)
338 #define CISTPL_CONFIG 0x1A
339 #define CISTPL_MANFID 0x20
340 #define CISTPL_END 0xFF
341 #define CIS_MAX_LEN 256
342 u8 *cis;
343 int i, pos;
344 unsigned int rmsz, rasz, manfid1, manfid2;
345 struct prism2_plx_manfid *manfid;
347 cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL);
348 if (cis == NULL)
349 return -ENOMEM;
351 /* read CIS; it is in even offsets in the beginning of attr_mem */
352 for (i = 0; i < CIS_MAX_LEN; i++)
353 cis[i] = readb(attr_mem + 2 * i);
354 printk(KERN_DEBUG "%s: CIS: %02x %02x %02x %02x %02x %02x ...\n",
355 dev_info, cis[0], cis[1], cis[2], cis[3], cis[4], cis[5]);
357 /* set reasonable defaults for Prism2 cards just in case CIS parsing
358 * fails */
359 *cor_offset = 0x3e0;
360 *cor_index = 0x01;
361 manfid1 = manfid2 = 0;
363 pos = 0;
364 while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) {
365 if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN)
366 goto cis_error;
368 switch (cis[pos]) {
369 case CISTPL_CONFIG:
370 if (cis[pos + 1] < 2)
371 goto cis_error;
372 rmsz = (cis[pos + 2] & 0x3c) >> 2;
373 rasz = cis[pos + 2] & 0x03;
374 if (4 + rasz + rmsz > cis[pos + 1])
375 goto cis_error;
376 *cor_index = cis[pos + 3] & 0x3F;
377 *cor_offset = 0;
378 for (i = 0; i <= rasz; i++)
379 *cor_offset += cis[pos + 4 + i] << (8 * i);
380 printk(KERN_DEBUG "%s: cor_index=0x%x "
381 "cor_offset=0x%x\n", dev_info,
382 *cor_index, *cor_offset);
383 if (*cor_offset > attr_len) {
384 printk(KERN_ERR "%s: COR offset not within "
385 "attr_mem\n", dev_info);
386 kfree(cis);
387 return -1;
389 break;
391 case CISTPL_MANFID:
392 if (cis[pos + 1] < 4)
393 goto cis_error;
394 manfid1 = cis[pos + 2] + (cis[pos + 3] << 8);
395 manfid2 = cis[pos + 4] + (cis[pos + 5] << 8);
396 printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n",
397 dev_info, manfid1, manfid2);
398 break;
401 pos += cis[pos + 1] + 2;
404 if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END)
405 goto cis_error;
407 for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++)
408 if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) {
409 kfree(cis);
410 return 0;
413 printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is"
414 " not supported card\n", dev_info, manfid1, manfid2);
415 goto fail;
417 cis_error:
418 printk(KERN_WARNING "%s: invalid CIS data\n", dev_info);
420 fail:
421 kfree(cis);
422 if (ignore_cis) {
423 printk(KERN_INFO "%s: ignore_cis parameter set - ignoring "
424 "errors during CIS verification\n", dev_info);
425 return 0;
427 return -1;
431 static int prism2_plx_probe(struct pci_dev *pdev,
432 const struct pci_device_id *id)
434 unsigned int pccard_ioaddr, plx_ioaddr;
435 unsigned long pccard_attr_mem;
436 unsigned int pccard_attr_len;
437 void __iomem *attr_mem = NULL;
438 unsigned int cor_offset, cor_index;
439 u32 reg;
440 local_info_t *local = NULL;
441 struct net_device *dev = NULL;
442 struct hostap_interface *iface;
443 static int cards_found /* = 0 */;
444 int irq_registered = 0;
445 int tmd7160;
446 struct hostap_plx_priv *hw_priv;
448 hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
449 if (hw_priv == NULL)
450 return -ENOMEM;
452 if (pci_enable_device(pdev))
453 goto err_out_free;
455 /* National Datacomm NCP130 based on TMD7160, not PLX9052. */
456 tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131);
458 plx_ioaddr = pci_resource_start(pdev, 1);
459 pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3);
461 if (tmd7160) {
462 /* TMD7160 */
463 attr_mem = NULL; /* no access to PC Card attribute memory */
465 printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, "
466 "irq=%d, pccard_io=0x%x\n",
467 plx_ioaddr, pdev->irq, pccard_ioaddr);
469 cor_offset = plx_ioaddr;
470 cor_index = 0x04;
472 outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr);
473 mdelay(1);
474 reg = inb(plx_ioaddr);
475 if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) {
476 printk(KERN_ERR "%s: Error setting COR (expected="
477 "0x%02x, was=0x%02x)\n", dev_info,
478 cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg);
479 goto fail;
481 } else {
482 /* PLX9052 */
483 pccard_attr_mem = pci_resource_start(pdev, 2);
484 pccard_attr_len = pci_resource_len(pdev, 2);
485 if (pccard_attr_len < PLX_MIN_ATTR_LEN)
486 goto fail;
489 attr_mem = ioremap(pccard_attr_mem, pccard_attr_len);
490 if (attr_mem == NULL) {
491 printk(KERN_ERR "%s: cannot remap attr_mem\n",
492 dev_info);
493 goto fail;
496 printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: "
497 "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n",
498 pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr);
500 if (prism2_plx_check_cis(attr_mem, pccard_attr_len,
501 &cor_offset, &cor_index)) {
502 printk(KERN_INFO "Unknown PC Card CIS - not a "
503 "Prism2/2.5 card?\n");
504 goto fail;
507 printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 "
508 "adapter\n");
510 /* Write COR to enable PC Card */
511 writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC,
512 attr_mem + cor_offset);
514 /* Enable PCI interrupts if they are not already enabled */
515 reg = inl(plx_ioaddr + PLX_INTCSR);
516 printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg);
517 if (!(reg & PLX_INTCSR_PCI_INTEN)) {
518 outl(reg | PLX_INTCSR_PCI_INTEN,
519 plx_ioaddr + PLX_INTCSR);
520 if (!(inl(plx_ioaddr + PLX_INTCSR) &
521 PLX_INTCSR_PCI_INTEN)) {
522 printk(KERN_WARNING "%s: Could not enable "
523 "Local Interrupts\n", dev_info);
524 goto fail;
528 reg = inl(plx_ioaddr + PLX_CNTRL);
529 printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM "
530 "present=%d)\n",
531 reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0);
532 /* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is
533 * not present; but are there really such cards in use(?) */
536 dev = prism2_init_local_data(&prism2_plx_funcs, cards_found,
537 &pdev->dev);
538 if (dev == NULL)
539 goto fail;
540 iface = netdev_priv(dev);
541 local = iface->local;
542 local->hw_priv = hw_priv;
543 cards_found++;
545 dev->irq = pdev->irq;
546 dev->base_addr = pccard_ioaddr;
547 hw_priv->attr_mem = attr_mem;
548 hw_priv->cor_offset = cor_offset;
550 pci_set_drvdata(pdev, dev);
552 if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
553 dev)) {
554 printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
555 goto fail;
556 } else
557 irq_registered = 1;
559 if (prism2_hw_config(dev, 1)) {
560 printk(KERN_DEBUG "%s: hardware initialization failed\n",
561 dev_info);
562 goto fail;
565 return hostap_hw_ready(dev);
567 fail:
568 if (irq_registered && dev)
569 free_irq(dev->irq, dev);
571 if (attr_mem)
572 iounmap(attr_mem);
574 pci_disable_device(pdev);
575 prism2_free_local_data(dev);
577 err_out_free:
578 kfree(hw_priv);
580 return -ENODEV;
584 static void prism2_plx_remove(struct pci_dev *pdev)
586 struct net_device *dev;
587 struct hostap_interface *iface;
588 struct hostap_plx_priv *hw_priv;
590 dev = pci_get_drvdata(pdev);
591 iface = netdev_priv(dev);
592 hw_priv = iface->local->hw_priv;
594 /* Reset the hardware, and ensure interrupts are disabled. */
595 prism2_plx_cor_sreset(iface->local);
596 hfa384x_disable_interrupts(dev);
598 if (hw_priv->attr_mem)
599 iounmap(hw_priv->attr_mem);
600 if (dev->irq)
601 free_irq(dev->irq, dev);
603 prism2_free_local_data(dev);
604 kfree(hw_priv);
605 pci_disable_device(pdev);
609 MODULE_DEVICE_TABLE(pci, prism2_plx_id_table);
611 static struct pci_driver prism2_plx_driver = {
612 .name = "hostap_plx",
613 .id_table = prism2_plx_id_table,
614 .probe = prism2_plx_probe,
615 .remove = prism2_plx_remove,
619 static int __init init_prism2_plx(void)
621 return pci_register_driver(&prism2_plx_driver);
625 static void __exit exit_prism2_plx(void)
627 pci_unregister_driver(&prism2_plx_driver);
631 module_init(init_prism2_plx);
632 module_exit(exit_prism2_plx);