2 * Adaptec AIC79xx device driver for Linux.
4 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
6 * --------------------------------------------------------------------------
7 * Copyright (c) 1994-2000 Justin T. Gibbs.
8 * Copyright (c) 1997-1999 Doug Ledford
9 * Copyright (c) 2000-2003 Adaptec Inc.
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
49 static struct scsi_transport_template
*ahd_linux_transport_template
= NULL
;
51 #include <linux/init.h> /* __setup */
52 #include <linux/mm.h> /* For fetching system memory size */
53 #include <linux/blkdev.h> /* For block_size() */
54 #include <linux/delay.h> /* For ssleep/msleep */
55 #include <linux/device.h>
58 * Bucket size for counting good commands in between bad ones.
60 #define AHD_LINUX_ERR_THRESH 1000
63 * Set this to the delay in seconds after SCSI bus reset.
64 * Note, we honor this only for the initial bus reset.
65 * The scsi error recovery code performs its own bus settle
66 * delay handling for error recovery actions.
68 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
69 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
71 #define AIC79XX_RESET_DELAY 5000
75 * To change the default number of tagged transactions allowed per-device,
76 * add a line to the lilo.conf file like:
77 * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
78 * which will result in the first four devices on the first two
79 * controllers being set to a tagged queue depth of 32.
81 * The tag_commands is an array of 16 to allow for wide and twin adapters.
82 * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
86 uint16_t tag_commands
[16]; /* Allow for wide/twin adapters. */
90 * Modify this as you see fit for your system.
92 * 0 tagged queuing disabled
93 * 1 <= n <= 253 n == max tags ever dispatched.
95 * The driver will throttle the number of commands dispatched to a
96 * device if it returns queue full. For devices with a fixed maximum
97 * queue depth, the driver will eventually determine this depth and
98 * lock it in (a console message is printed to indicate that a lock
99 * has occurred). On some devices, queue full is returned for a temporary
100 * resource shortage. These devices will return queue full at varying
101 * depths. The driver will throttle back when the queue fulls occur and
102 * attempt to slowly increase the depth over time as the device recovers
103 * from the resource shortage.
105 * In this example, the first line will disable tagged queueing for all
106 * the devices on the first probed aic79xx adapter.
108 * The second line enables tagged queueing with 4 commands/LUN for IDs
109 * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
110 * driver to attempt to use up to 64 tags for ID 1.
112 * The third line is the same as the first line.
114 * The fourth line disables tagged queueing for devices 0 and 3. It
115 * enables tagged queueing for the other IDs, with 16 commands/LUN
116 * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
117 * IDs 2, 5-7, and 9-15.
121 * NOTE: The below structure is for reference only, the actual structure
122 * to modify in order to change things is just below this comment block.
123 adapter_tag_info_t aic79xx_tag_info[] =
125 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
126 {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
127 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
128 {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
132 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
133 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
135 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
138 #define AIC79XX_CONFIGED_TAG_COMMANDS { \
139 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
140 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
141 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
142 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
143 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
144 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
145 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
146 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \
150 * By default, use the number of commands specified by
151 * the users kernel configuration.
153 static adapter_tag_info_t aic79xx_tag_info
[] =
155 {AIC79XX_CONFIGED_TAG_COMMANDS
},
156 {AIC79XX_CONFIGED_TAG_COMMANDS
},
157 {AIC79XX_CONFIGED_TAG_COMMANDS
},
158 {AIC79XX_CONFIGED_TAG_COMMANDS
},
159 {AIC79XX_CONFIGED_TAG_COMMANDS
},
160 {AIC79XX_CONFIGED_TAG_COMMANDS
},
161 {AIC79XX_CONFIGED_TAG_COMMANDS
},
162 {AIC79XX_CONFIGED_TAG_COMMANDS
},
163 {AIC79XX_CONFIGED_TAG_COMMANDS
},
164 {AIC79XX_CONFIGED_TAG_COMMANDS
},
165 {AIC79XX_CONFIGED_TAG_COMMANDS
},
166 {AIC79XX_CONFIGED_TAG_COMMANDS
},
167 {AIC79XX_CONFIGED_TAG_COMMANDS
},
168 {AIC79XX_CONFIGED_TAG_COMMANDS
},
169 {AIC79XX_CONFIGED_TAG_COMMANDS
},
170 {AIC79XX_CONFIGED_TAG_COMMANDS
}
174 * The I/O cell on the chip is very configurable in respect to its analog
175 * characteristics. Set the defaults here; they can be overriden with
176 * the proper insmod parameters.
178 struct ahd_linux_iocell_opts
184 #define AIC79XX_DEFAULT_PRECOMP 0xFF
185 #define AIC79XX_DEFAULT_SLEWRATE 0xFF
186 #define AIC79XX_DEFAULT_AMPLITUDE 0xFF
187 #define AIC79XX_DEFAULT_IOOPTS \
189 AIC79XX_DEFAULT_PRECOMP, \
190 AIC79XX_DEFAULT_SLEWRATE, \
191 AIC79XX_DEFAULT_AMPLITUDE \
193 #define AIC79XX_PRECOMP_INDEX 0
194 #define AIC79XX_SLEWRATE_INDEX 1
195 #define AIC79XX_AMPLITUDE_INDEX 2
196 static const struct ahd_linux_iocell_opts aic79xx_iocell_info
[] =
198 AIC79XX_DEFAULT_IOOPTS
,
199 AIC79XX_DEFAULT_IOOPTS
,
200 AIC79XX_DEFAULT_IOOPTS
,
201 AIC79XX_DEFAULT_IOOPTS
,
202 AIC79XX_DEFAULT_IOOPTS
,
203 AIC79XX_DEFAULT_IOOPTS
,
204 AIC79XX_DEFAULT_IOOPTS
,
205 AIC79XX_DEFAULT_IOOPTS
,
206 AIC79XX_DEFAULT_IOOPTS
,
207 AIC79XX_DEFAULT_IOOPTS
,
208 AIC79XX_DEFAULT_IOOPTS
,
209 AIC79XX_DEFAULT_IOOPTS
,
210 AIC79XX_DEFAULT_IOOPTS
,
211 AIC79XX_DEFAULT_IOOPTS
,
212 AIC79XX_DEFAULT_IOOPTS
,
213 AIC79XX_DEFAULT_IOOPTS
217 * There should be a specific return value for this in scsi.h, but
218 * it seems that most drivers ignore it.
220 #define DID_UNDERFLOW DID_ERROR
223 ahd_print_path(struct ahd_softc
*ahd
, struct scb
*scb
)
225 printk("(scsi%d:%c:%d:%d): ",
226 ahd
->platform_data
->host
->host_no
,
227 scb
!= NULL
? SCB_GET_CHANNEL(ahd
, scb
) : 'X',
228 scb
!= NULL
? SCB_GET_TARGET(ahd
, scb
) : -1,
229 scb
!= NULL
? SCB_GET_LUN(scb
) : -1);
233 * XXX - these options apply unilaterally to _all_ adapters
234 * cards in the system. This should be fixed. Exceptions to this
235 * rule are noted in the comments.
239 * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
240 * has no effect on any later resets that might occur due to things like
243 static uint32_t aic79xx_no_reset
;
246 * Should we force EXTENDED translation on a controller.
247 * 0 == Use whatever is in the SEEPROM or default to off
248 * 1 == Use whatever is in the SEEPROM or default to on
250 static uint32_t aic79xx_extended
;
253 * PCI bus parity checking of the Adaptec controllers. This is somewhat
254 * dubious at best. To my knowledge, this option has never actually
255 * solved a PCI parity problem, but on certain machines with broken PCI
256 * chipset configurations, it can generate tons of false error messages.
257 * It's included in the driver for completeness.
258 * 0 = Shut off PCI parity check
259 * non-0 = Enable PCI parity check
261 * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
262 * variable to -1 you would actually want to simply pass the variable
263 * name without a number. That will invert the 0 which will result in
266 static uint32_t aic79xx_pci_parity
= ~0;
269 * There are lots of broken chipsets in the world. Some of them will
270 * violate the PCI spec when we issue byte sized memory writes to our
271 * controller. I/O mapped register access, if allowed by the given
272 * platform, will work in almost all cases.
274 uint32_t aic79xx_allow_memio
= ~0;
277 * So that we can set how long each device is given as a selection timeout.
278 * The table of values goes like this:
283 * We default to 256ms because some older devices need a longer time
284 * to respond to initial selection.
286 static uint32_t aic79xx_seltime
;
289 * Certain devices do not perform any aging on commands. Should the
290 * device be saturated by commands in one portion of the disk, it is
291 * possible for transactions on far away sectors to never be serviced.
292 * To handle these devices, we can periodically send an ordered tag to
293 * force all outstanding transactions to be serviced prior to a new
296 static uint32_t aic79xx_periodic_otag
;
298 /* Some storage boxes are using an LSI chip which has a bug making it
299 * impossible to use aic79xx Rev B chip in 320 speeds. The following
300 * storage boxes have been reported to be buggy:
301 * EonStor 3U 16-Bay: U16U-G3A3
302 * EonStor 2U 12-Bay: U12U-G3A3
303 * SentinelRAID: 2500F R5 / R6
304 * SentinelRAID: 2500F R1
305 * SentinelRAID: 2500F/1500F
308 * To get around this LSI bug, you can set your board to 160 mode
309 * or you can enable the SLOWCRC bit.
311 uint32_t aic79xx_slowcrc
;
314 * Module information and settable options.
316 static char *aic79xx
= NULL
;
318 MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
319 MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
320 MODULE_LICENSE("Dual BSD/GPL");
321 MODULE_VERSION(AIC79XX_DRIVER_VERSION
);
322 module_param(aic79xx
, charp
, 0444);
323 MODULE_PARM_DESC(aic79xx
,
324 "period-delimited options string:\n"
325 " verbose Enable verbose/diagnostic logging\n"
326 " allow_memio Allow device registers to be memory mapped\n"
327 " debug Bitmask of debug values to enable\n"
328 " no_reset Suppress initial bus resets\n"
329 " extended Enable extended geometry on all controllers\n"
330 " periodic_otag Send an ordered tagged transaction\n"
331 " periodically to prevent tag starvation.\n"
332 " This may be required by some older disk\n"
333 " or drives/RAID arrays.\n"
334 " tag_info:<tag_str> Set per-target tag depth\n"
335 " global_tag_depth:<int> Global tag depth for all targets on all buses\n"
336 " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
337 " precomp:<pcomp_list> Set the signal precompensation (0-7).\n"
338 " amplitude:<int> Set the signal amplitude (0-7).\n"
339 " seltime:<int> Selection Timeout:\n"
340 " (0/256ms,1/128ms,2/64ms,3/32ms)\n"
341 " slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
343 " Sample /etc/modprobe.conf line:\n"
344 " Enable verbose logging\n"
345 " Set tag depth on Controller 2/Target 2 to 10 tags\n"
346 " Shorten the selection timeout to 128ms\n"
348 " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
351 static void ahd_linux_handle_scsi_status(struct ahd_softc
*,
352 struct scsi_device
*,
354 static void ahd_linux_queue_cmd_complete(struct ahd_softc
*ahd
,
355 struct scsi_cmnd
*cmd
);
356 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd
*cmd
);
357 static void ahd_linux_initialize_scsi_bus(struct ahd_softc
*ahd
);
358 static u_int
ahd_linux_user_tagdepth(struct ahd_softc
*ahd
,
359 struct ahd_devinfo
*devinfo
);
360 static void ahd_linux_device_queue_depth(struct scsi_device
*);
361 static int ahd_linux_run_command(struct ahd_softc
*,
362 struct ahd_linux_device
*,
364 static void ahd_linux_setup_tag_info_global(char *p
);
365 static int aic79xx_setup(char *c
);
366 static void ahd_freeze_simq(struct ahd_softc
*ahd
);
367 static void ahd_release_simq(struct ahd_softc
*ahd
);
369 static int ahd_linux_unit
;
372 /************************** OS Utility Wrappers *******************************/
373 void ahd_delay(long);
378 * udelay on Linux can have problems for
379 * multi-millisecond waits. Wait at most
389 /***************************** Low Level I/O **********************************/
390 uint8_t ahd_inb(struct ahd_softc
* ahd
, long port
);
391 void ahd_outb(struct ahd_softc
* ahd
, long port
, uint8_t val
);
392 void ahd_outw_atomic(struct ahd_softc
* ahd
,
393 long port
, uint16_t val
);
394 void ahd_outsb(struct ahd_softc
* ahd
, long port
,
395 uint8_t *, int count
);
396 void ahd_insb(struct ahd_softc
* ahd
, long port
,
397 uint8_t *, int count
);
400 ahd_inb(struct ahd_softc
* ahd
, long port
)
404 if (ahd
->tags
[0] == BUS_SPACE_MEMIO
) {
405 x
= readb(ahd
->bshs
[0].maddr
+ port
);
407 x
= inb(ahd
->bshs
[(port
) >> 8].ioport
+ ((port
) & 0xFF));
415 ahd_inw_atomic(struct ahd_softc
* ahd
, long port
)
419 if (ahd
->tags
[0] == BUS_SPACE_MEMIO
) {
420 x
= readw(ahd
->bshs
[0].maddr
+ port
);
422 x
= inw(ahd
->bshs
[(port
) >> 8].ioport
+ ((port
) & 0xFF));
430 ahd_outb(struct ahd_softc
* ahd
, long port
, uint8_t val
)
432 if (ahd
->tags
[0] == BUS_SPACE_MEMIO
) {
433 writeb(val
, ahd
->bshs
[0].maddr
+ port
);
435 outb(val
, ahd
->bshs
[(port
) >> 8].ioport
+ (port
& 0xFF));
441 ahd_outw_atomic(struct ahd_softc
* ahd
, long port
, uint16_t val
)
443 if (ahd
->tags
[0] == BUS_SPACE_MEMIO
) {
444 writew(val
, ahd
->bshs
[0].maddr
+ port
);
446 outw(val
, ahd
->bshs
[(port
) >> 8].ioport
+ (port
& 0xFF));
452 ahd_outsb(struct ahd_softc
* ahd
, long port
, uint8_t *array
, int count
)
457 * There is probably a more efficient way to do this on Linux
458 * but we don't use this for anything speed critical and this
461 for (i
= 0; i
< count
; i
++)
462 ahd_outb(ahd
, port
, *array
++);
466 ahd_insb(struct ahd_softc
* ahd
, long port
, uint8_t *array
, int count
)
471 * There is probably a more efficient way to do this on Linux
472 * but we don't use this for anything speed critical and this
475 for (i
= 0; i
< count
; i
++)
476 *array
++ = ahd_inb(ahd
, port
);
479 /******************************* PCI Routines *********************************/
481 ahd_pci_read_config(ahd_dev_softc_t pci
, int reg
, int width
)
488 pci_read_config_byte(pci
, reg
, &retval
);
494 pci_read_config_word(pci
, reg
, &retval
);
500 pci_read_config_dword(pci
, reg
, &retval
);
504 panic("ahd_pci_read_config: Read size too big");
511 ahd_pci_write_config(ahd_dev_softc_t pci
, int reg
, uint32_t value
, int width
)
515 pci_write_config_byte(pci
, reg
, value
);
518 pci_write_config_word(pci
, reg
, value
);
521 pci_write_config_dword(pci
, reg
, value
);
524 panic("ahd_pci_write_config: Write size too big");
529 /****************************** Inlines ***************************************/
530 static void ahd_linux_unmap_scb(struct ahd_softc
*, struct scb
*);
533 ahd_linux_unmap_scb(struct ahd_softc
*ahd
, struct scb
*scb
)
535 struct scsi_cmnd
*cmd
;
538 ahd_sync_sglist(ahd
, scb
, BUS_DMASYNC_POSTWRITE
);
542 /******************************** Macros **************************************/
543 #define BUILD_SCSIID(ahd, cmd) \
544 (((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
547 * Return a string describing the driver.
550 ahd_linux_info(struct Scsi_Host
*host
)
552 static char buffer
[512];
555 struct ahd_softc
*ahd
;
558 ahd
= *(struct ahd_softc
**)host
->hostdata
;
559 memset(bp
, 0, sizeof(buffer
));
560 strcpy(bp
, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION
"\n"
562 strcat(bp
, ahd
->description
);
565 ahd_controller_info(ahd
, ahd_info
);
566 strcat(bp
, ahd_info
);
572 * Queue an SCB to the controller.
575 ahd_linux_queue(struct scsi_cmnd
* cmd
, void (*scsi_done
) (struct scsi_cmnd
*))
577 struct ahd_softc
*ahd
;
578 struct ahd_linux_device
*dev
= scsi_transport_device_data(cmd
->device
);
579 int rtn
= SCSI_MLQUEUE_HOST_BUSY
;
581 ahd
= *(struct ahd_softc
**)cmd
->device
->host
->hostdata
;
583 cmd
->scsi_done
= scsi_done
;
584 cmd
->result
= CAM_REQ_INPROG
<< 16;
585 rtn
= ahd_linux_run_command(ahd
, dev
, cmd
);
590 static struct scsi_target
**
591 ahd_linux_target_in_softc(struct scsi_target
*starget
)
593 struct ahd_softc
*ahd
=
594 *((struct ahd_softc
**)dev_to_shost(&starget
->dev
)->hostdata
);
595 unsigned int target_offset
;
597 target_offset
= starget
->id
;
598 if (starget
->channel
!= 0)
601 return &ahd
->platform_data
->starget
[target_offset
];
605 ahd_linux_target_alloc(struct scsi_target
*starget
)
607 struct ahd_softc
*ahd
=
608 *((struct ahd_softc
**)dev_to_shost(&starget
->dev
)->hostdata
);
609 struct seeprom_config
*sc
= ahd
->seep_config
;
611 struct scsi_target
**ahd_targp
= ahd_linux_target_in_softc(starget
);
612 struct ahd_devinfo devinfo
;
613 struct ahd_initiator_tinfo
*tinfo
;
614 struct ahd_tmode_tstate
*tstate
;
615 char channel
= starget
->channel
+ 'A';
617 ahd_lock(ahd
, &flags
);
619 BUG_ON(*ahd_targp
!= NULL
);
621 *ahd_targp
= starget
;
624 int flags
= sc
->device_flags
[starget
->id
];
626 tinfo
= ahd_fetch_transinfo(ahd
, 'A', ahd
->our_id
,
627 starget
->id
, &tstate
);
629 if ((flags
& CFPACKETIZED
) == 0) {
630 /* Do not negotiate packetized transfers */
631 spi_rd_strm(starget
) = 0;
632 spi_pcomp_en(starget
) = 0;
633 spi_rti(starget
) = 0;
634 spi_wr_flow(starget
) = 0;
635 spi_hold_mcs(starget
) = 0;
637 if ((ahd
->features
& AHD_RTI
) == 0)
638 spi_rti(starget
) = 0;
641 if ((flags
& CFQAS
) == 0)
642 spi_qas(starget
) = 0;
644 /* Transinfo values have been set to BIOS settings */
645 spi_max_width(starget
) = (flags
& CFWIDEB
) ? 1 : 0;
646 spi_min_period(starget
) = tinfo
->user
.period
;
647 spi_max_offset(starget
) = tinfo
->user
.offset
;
650 tinfo
= ahd_fetch_transinfo(ahd
, channel
, ahd
->our_id
,
651 starget
->id
, &tstate
);
652 ahd_compile_devinfo(&devinfo
, ahd
->our_id
, starget
->id
,
653 CAM_LUN_WILDCARD
, channel
,
655 ahd_set_syncrate(ahd
, &devinfo
, 0, 0, 0,
656 AHD_TRANS_GOAL
, /*paused*/FALSE
);
657 ahd_set_width(ahd
, &devinfo
, MSG_EXT_WDTR_BUS_8_BIT
,
658 AHD_TRANS_GOAL
, /*paused*/FALSE
);
659 ahd_unlock(ahd
, &flags
);
665 ahd_linux_target_destroy(struct scsi_target
*starget
)
667 struct scsi_target
**ahd_targp
= ahd_linux_target_in_softc(starget
);
673 ahd_linux_slave_alloc(struct scsi_device
*sdev
)
675 struct ahd_softc
*ahd
=
676 *((struct ahd_softc
**)sdev
->host
->hostdata
);
677 struct ahd_linux_device
*dev
;
680 printf("%s: Slave Alloc %d\n", ahd_name(ahd
), sdev
->id
);
682 dev
= scsi_transport_device_data(sdev
);
683 memset(dev
, 0, sizeof(*dev
));
686 * We start out life using untagged
687 * transactions of which we allow one.
692 * Set maxtags to 0. This will be changed if we
693 * later determine that we are dealing with
694 * a tagged queuing capable device.
702 ahd_linux_slave_configure(struct scsi_device
*sdev
)
704 struct ahd_softc
*ahd
;
706 ahd
= *((struct ahd_softc
**)sdev
->host
->hostdata
);
708 sdev_printk(KERN_INFO
, sdev
, "Slave Configure\n");
710 ahd_linux_device_queue_depth(sdev
);
712 /* Initial Domain Validation */
713 if (!spi_initial_dv(sdev
->sdev_target
))
719 #if defined(__i386__)
721 * Return the disk geometry for the given SCSI device.
724 ahd_linux_biosparam(struct scsi_device
*sdev
, struct block_device
*bdev
,
725 sector_t capacity
, int geom
[])
733 struct ahd_softc
*ahd
;
735 ahd
= *((struct ahd_softc
**)sdev
->host
->hostdata
);
737 bh
= scsi_bios_ptable(bdev
);
739 ret
= scsi_partsize(bh
, capacity
,
740 &geom
[2], &geom
[0], &geom
[1]);
747 cylinders
= aic_sector_div(capacity
, heads
, sectors
);
749 if (aic79xx_extended
!= 0)
752 extended
= (ahd
->flags
& AHD_EXTENDED_TRANS_A
) != 0;
753 if (extended
&& cylinders
>= 1024) {
756 cylinders
= aic_sector_div(capacity
, heads
, sectors
);
766 * Abort the current SCSI command(s).
769 ahd_linux_abort(struct scsi_cmnd
*cmd
)
773 error
= ahd_linux_queue_abort_cmd(cmd
);
779 * Attempt to send a target reset message to the device that timed out.
782 ahd_linux_dev_reset(struct scsi_cmnd
*cmd
)
784 struct ahd_softc
*ahd
;
785 struct ahd_linux_device
*dev
;
786 struct scb
*reset_scb
;
788 int retval
= SUCCESS
;
791 struct ahd_initiator_tinfo
*tinfo
;
792 struct ahd_tmode_tstate
*tstate
;
794 DECLARE_COMPLETION_ONSTACK(done
);
799 ahd
= *(struct ahd_softc
**)cmd
->device
->host
->hostdata
;
801 scmd_printk(KERN_INFO
, cmd
,
802 "Attempting to queue a TARGET RESET message:");
805 for (cdb_byte
= 0; cdb_byte
< cmd
->cmd_len
; cdb_byte
++)
806 printf(" 0x%x", cmd
->cmnd
[cdb_byte
]);
810 * Determine if we currently own this command.
812 dev
= scsi_transport_device_data(cmd
->device
);
816 * No target device for this command exists,
817 * so we must not still own the command.
819 scmd_printk(KERN_INFO
, cmd
, "Is not an active device\n");
824 * Generate us a new SCB
826 reset_scb
= ahd_get_scb(ahd
, AHD_NEVER_COL_IDX
);
828 scmd_printk(KERN_INFO
, cmd
, "No SCB available\n");
832 tinfo
= ahd_fetch_transinfo(ahd
, 'A', ahd
->our_id
,
833 cmd
->device
->id
, &tstate
);
834 reset_scb
->io_ctx
= cmd
;
835 reset_scb
->platform_data
->dev
= dev
;
836 reset_scb
->sg_count
= 0;
837 ahd_set_residual(reset_scb
, 0);
838 ahd_set_sense_residual(reset_scb
, 0);
839 reset_scb
->platform_data
->xfer_len
= 0;
840 reset_scb
->hscb
->control
= 0;
841 reset_scb
->hscb
->scsiid
= BUILD_SCSIID(ahd
,cmd
);
842 reset_scb
->hscb
->lun
= cmd
->device
->lun
;
843 reset_scb
->hscb
->cdb_len
= 0;
844 reset_scb
->hscb
->task_management
= SIU_TASKMGMT_LUN_RESET
;
845 reset_scb
->flags
|= SCB_DEVICE_RESET
|SCB_RECOVERY_SCB
|SCB_ACTIVE
;
846 if ((tinfo
->curr
.ppr_options
& MSG_EXT_PPR_IU_REQ
) != 0) {
847 reset_scb
->flags
|= SCB_PACKETIZED
;
849 reset_scb
->hscb
->control
|= MK_MESSAGE
;
853 dev
->commands_issued
++;
855 ahd_lock(ahd
, &flags
);
857 LIST_INSERT_HEAD(&ahd
->pending_scbs
, reset_scb
, pending_links
);
858 ahd_queue_scb(ahd
, reset_scb
);
860 ahd
->platform_data
->eh_done
= &done
;
861 ahd_unlock(ahd
, &flags
);
863 printf("%s: Device reset code sleeping\n", ahd_name(ahd
));
864 if (!wait_for_completion_timeout(&done
, 5 * HZ
)) {
865 ahd_lock(ahd
, &flags
);
866 ahd
->platform_data
->eh_done
= NULL
;
867 ahd_unlock(ahd
, &flags
);
868 printf("%s: Device reset timer expired (active %d)\n",
869 ahd_name(ahd
), dev
->active
);
872 printf("%s: Device reset returning 0x%x\n", ahd_name(ahd
), retval
);
878 * Reset the SCSI bus.
881 ahd_linux_bus_reset(struct scsi_cmnd
*cmd
)
883 struct ahd_softc
*ahd
;
887 ahd
= *(struct ahd_softc
**)cmd
->device
->host
->hostdata
;
889 if ((ahd_debug
& AHD_SHOW_RECOVERY
) != 0)
890 printf("%s: Bus reset called for cmd %p\n",
893 ahd_lock(ahd
, &flags
);
895 found
= ahd_reset_channel(ahd
, scmd_channel(cmd
) + 'A',
896 /*initiate reset*/TRUE
);
897 ahd_unlock(ahd
, &flags
);
900 printf("%s: SCSI bus reset delivered. "
901 "%d SCBs aborted.\n", ahd_name(ahd
), found
);
906 struct scsi_host_template aic79xx_driver_template
= {
907 .module
= THIS_MODULE
,
909 .proc_name
= "aic79xx",
910 .proc_info
= ahd_linux_proc_info
,
911 .info
= ahd_linux_info
,
912 .queuecommand
= ahd_linux_queue
,
913 .eh_abort_handler
= ahd_linux_abort
,
914 .eh_device_reset_handler
= ahd_linux_dev_reset
,
915 .eh_bus_reset_handler
= ahd_linux_bus_reset
,
916 #if defined(__i386__)
917 .bios_param
= ahd_linux_biosparam
,
919 .can_queue
= AHD_MAX_QUEUE
,
923 .use_clustering
= ENABLE_CLUSTERING
,
924 .slave_alloc
= ahd_linux_slave_alloc
,
925 .slave_configure
= ahd_linux_slave_configure
,
926 .target_alloc
= ahd_linux_target_alloc
,
927 .target_destroy
= ahd_linux_target_destroy
,
930 /******************************** Bus DMA *************************************/
932 ahd_dma_tag_create(struct ahd_softc
*ahd
, bus_dma_tag_t parent
,
933 bus_size_t alignment
, bus_size_t boundary
,
934 dma_addr_t lowaddr
, dma_addr_t highaddr
,
935 bus_dma_filter_t
*filter
, void *filterarg
,
936 bus_size_t maxsize
, int nsegments
,
937 bus_size_t maxsegsz
, int flags
, bus_dma_tag_t
*ret_tag
)
941 dmat
= malloc(sizeof(*dmat
), M_DEVBUF
, M_NOWAIT
);
946 * Linux is very simplistic about DMA memory. For now don't
947 * maintain all specification information. Once Linux supplies
948 * better facilities for doing these operations, or the
949 * needs of this particular driver change, we might need to do
952 dmat
->alignment
= alignment
;
953 dmat
->boundary
= boundary
;
954 dmat
->maxsize
= maxsize
;
960 ahd_dma_tag_destroy(struct ahd_softc
*ahd
, bus_dma_tag_t dmat
)
962 free(dmat
, M_DEVBUF
);
966 ahd_dmamem_alloc(struct ahd_softc
*ahd
, bus_dma_tag_t dmat
, void** vaddr
,
967 int flags
, bus_dmamap_t
*mapp
)
969 *vaddr
= pci_alloc_consistent(ahd
->dev_softc
,
970 dmat
->maxsize
, mapp
);
977 ahd_dmamem_free(struct ahd_softc
*ahd
, bus_dma_tag_t dmat
,
978 void* vaddr
, bus_dmamap_t map
)
980 pci_free_consistent(ahd
->dev_softc
, dmat
->maxsize
,
985 ahd_dmamap_load(struct ahd_softc
*ahd
, bus_dma_tag_t dmat
, bus_dmamap_t map
,
986 void *buf
, bus_size_t buflen
, bus_dmamap_callback_t
*cb
,
987 void *cb_arg
, int flags
)
990 * Assume for now that this will only be used during
991 * initialization and not for per-transaction buffer mapping.
993 bus_dma_segment_t stack_sg
;
995 stack_sg
.ds_addr
= map
;
996 stack_sg
.ds_len
= dmat
->maxsize
;
997 cb(cb_arg
, &stack_sg
, /*nseg*/1, /*error*/0);
1002 ahd_dmamap_destroy(struct ahd_softc
*ahd
, bus_dma_tag_t dmat
, bus_dmamap_t map
)
1007 ahd_dmamap_unload(struct ahd_softc
*ahd
, bus_dma_tag_t dmat
, bus_dmamap_t map
)
1013 /********************* Platform Dependent Functions ***************************/
1015 ahd_linux_setup_iocell_info(u_long index
, int instance
, int targ
, int32_t value
)
1019 && (instance
< ARRAY_SIZE(aic79xx_iocell_info
))) {
1020 uint8_t *iocell_info
;
1022 iocell_info
= (uint8_t*)&aic79xx_iocell_info
[instance
];
1023 iocell_info
[index
] = value
& 0xFFFF;
1025 printf("iocell[%d:%ld] = %d\n", instance
, index
, value
);
1030 ahd_linux_setup_tag_info_global(char *p
)
1034 tags
= simple_strtoul(p
+ 1, NULL
, 0) & 0xff;
1035 printf("Setting Global Tags= %d\n", tags
);
1037 for (i
= 0; i
< ARRAY_SIZE(aic79xx_tag_info
); i
++) {
1038 for (j
= 0; j
< AHD_NUM_TARGETS
; j
++) {
1039 aic79xx_tag_info
[i
].tag_commands
[j
] = tags
;
1045 ahd_linux_setup_tag_info(u_long arg
, int instance
, int targ
, int32_t value
)
1048 if ((instance
>= 0) && (targ
>= 0)
1049 && (instance
< ARRAY_SIZE(aic79xx_tag_info
))
1050 && (targ
< AHD_NUM_TARGETS
)) {
1051 aic79xx_tag_info
[instance
].tag_commands
[targ
] = value
& 0x1FF;
1053 printf("tag_info[%d:%d] = %d\n", instance
, targ
, value
);
1058 ahd_parse_brace_option(char *opt_name
, char *opt_arg
, char *end
, int depth
,
1059 void (*callback
)(u_long
, int, int, int32_t),
1060 u_long callback_arg
)
1068 char tok_list
[] = {'.', ',', '{', '}', '\0'};
1070 /* All options use a ':' name/arg separator */
1071 if (*opt_arg
!= ':')
1078 * Restore separator that may be in
1079 * the middle of our option argument.
1081 tok_end
= strchr(opt_arg
, '\0');
1087 if (instance
== -1) {
1094 printf("Malformed Option %s\n",
1104 else if (instance
!= -1)
1114 else if (instance
>= 0)
1123 for (i
= 0; tok_list
[i
]; i
++) {
1124 tok_end2
= strchr(opt_arg
, tok_list
[i
]);
1125 if ((tok_end2
) && (tok_end2
< tok_end
))
1128 callback(callback_arg
, instance
, targ
,
1129 simple_strtol(opt_arg
, NULL
, 0));
1138 * Handle Linux boot parameters. This routine allows for assigning a value
1139 * to a parameter with a ':' between the parameter and the value.
1140 * ie. aic79xx=stpwlev:1,extended
1143 aic79xx_setup(char *s
)
1149 static const struct {
1153 { "extended", &aic79xx_extended
},
1154 { "no_reset", &aic79xx_no_reset
},
1155 { "verbose", &aic79xx_verbose
},
1156 { "allow_memio", &aic79xx_allow_memio
},
1158 { "debug", &ahd_debug
},
1160 { "periodic_otag", &aic79xx_periodic_otag
},
1161 { "pci_parity", &aic79xx_pci_parity
},
1162 { "seltime", &aic79xx_seltime
},
1163 { "tag_info", NULL
},
1164 { "global_tag_depth", NULL
},
1165 { "slewrate", NULL
},
1166 { "precomp", NULL
},
1167 { "amplitude", NULL
},
1168 { "slowcrc", &aic79xx_slowcrc
},
1171 end
= strchr(s
, '\0');
1174 * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1175 * will never be 0 in this case.
1179 while ((p
= strsep(&s
, ",.")) != NULL
) {
1182 for (i
= 0; i
< ARRAY_SIZE(options
); i
++) {
1184 n
= strlen(options
[i
].name
);
1185 if (strncmp(options
[i
].name
, p
, n
) == 0)
1188 if (i
== ARRAY_SIZE(options
))
1191 if (strncmp(p
, "global_tag_depth", n
) == 0) {
1192 ahd_linux_setup_tag_info_global(p
+ n
);
1193 } else if (strncmp(p
, "tag_info", n
) == 0) {
1194 s
= ahd_parse_brace_option("tag_info", p
+ n
, end
,
1195 2, ahd_linux_setup_tag_info
, 0);
1196 } else if (strncmp(p
, "slewrate", n
) == 0) {
1197 s
= ahd_parse_brace_option("slewrate",
1198 p
+ n
, end
, 1, ahd_linux_setup_iocell_info
,
1199 AIC79XX_SLEWRATE_INDEX
);
1200 } else if (strncmp(p
, "precomp", n
) == 0) {
1201 s
= ahd_parse_brace_option("precomp",
1202 p
+ n
, end
, 1, ahd_linux_setup_iocell_info
,
1203 AIC79XX_PRECOMP_INDEX
);
1204 } else if (strncmp(p
, "amplitude", n
) == 0) {
1205 s
= ahd_parse_brace_option("amplitude",
1206 p
+ n
, end
, 1, ahd_linux_setup_iocell_info
,
1207 AIC79XX_AMPLITUDE_INDEX
);
1208 } else if (p
[n
] == ':') {
1209 *(options
[i
].flag
) = simple_strtoul(p
+ n
+ 1, NULL
, 0);
1210 } else if (!strncmp(p
, "verbose", n
)) {
1211 *(options
[i
].flag
) = 1;
1213 *(options
[i
].flag
) ^= 0xFFFFFFFF;
1219 __setup("aic79xx=", aic79xx_setup
);
1221 uint32_t aic79xx_verbose
;
1224 ahd_linux_register_host(struct ahd_softc
*ahd
, struct scsi_host_template
*template)
1227 struct Scsi_Host
*host
;
1232 template->name
= ahd
->description
;
1233 host
= scsi_host_alloc(template, sizeof(struct ahd_softc
*));
1237 *((struct ahd_softc
**)host
->hostdata
) = ahd
;
1238 ahd
->platform_data
->host
= host
;
1239 host
->can_queue
= AHD_MAX_QUEUE
;
1240 host
->cmd_per_lun
= 2;
1241 host
->sg_tablesize
= AHD_NSEG
;
1242 host
->this_id
= ahd
->our_id
;
1243 host
->irq
= ahd
->platform_data
->irq
;
1244 host
->max_id
= (ahd
->features
& AHD_WIDE
) ? 16 : 8;
1245 host
->max_lun
= AHD_NUM_LUNS
;
1246 host
->max_channel
= 0;
1247 host
->sg_tablesize
= AHD_NSEG
;
1249 ahd_set_unit(ahd
, ahd_linux_unit
++);
1250 ahd_unlock(ahd
, &s
);
1251 sprintf(buf
, "scsi%d", host
->host_no
);
1252 new_name
= malloc(strlen(buf
) + 1, M_DEVBUF
, M_NOWAIT
);
1253 if (new_name
!= NULL
) {
1254 strcpy(new_name
, buf
);
1255 ahd_set_name(ahd
, new_name
);
1257 host
->unique_id
= ahd
->unit
;
1258 ahd_linux_initialize_scsi_bus(ahd
);
1259 ahd_intr_enable(ahd
, TRUE
);
1261 host
->transportt
= ahd_linux_transport_template
;
1263 retval
= scsi_add_host(host
, &ahd
->dev_softc
->dev
);
1265 printk(KERN_WARNING
"aic79xx: scsi_add_host failed\n");
1266 scsi_host_put(host
);
1270 scsi_scan_host(host
);
1275 * Place the SCSI bus into a known state by either resetting it,
1276 * or forcing transfer negotiations on the next command to any
1280 ahd_linux_initialize_scsi_bus(struct ahd_softc
*ahd
)
1289 if (aic79xx_no_reset
!= 0)
1290 ahd
->flags
&= ~AHD_RESET_BUS_A
;
1292 if ((ahd
->flags
& AHD_RESET_BUS_A
) != 0)
1293 ahd_reset_channel(ahd
, 'A', /*initiate_reset*/TRUE
);
1295 numtarg
= (ahd
->features
& AHD_WIDE
) ? 16 : 8;
1300 * Force negotiation to async for all targets that
1301 * will not see an initial bus reset.
1303 for (; target_id
< numtarg
; target_id
++) {
1304 struct ahd_devinfo devinfo
;
1305 struct ahd_initiator_tinfo
*tinfo
;
1306 struct ahd_tmode_tstate
*tstate
;
1308 tinfo
= ahd_fetch_transinfo(ahd
, 'A', ahd
->our_id
,
1309 target_id
, &tstate
);
1310 ahd_compile_devinfo(&devinfo
, ahd
->our_id
, target_id
,
1311 CAM_LUN_WILDCARD
, 'A', ROLE_INITIATOR
);
1312 ahd_update_neg_request(ahd
, &devinfo
, tstate
,
1313 tinfo
, AHD_NEG_ALWAYS
);
1315 ahd_unlock(ahd
, &s
);
1316 /* Give the bus some time to recover */
1317 if ((ahd
->flags
& AHD_RESET_BUS_A
) != 0) {
1318 ahd_freeze_simq(ahd
);
1319 msleep(AIC79XX_RESET_DELAY
);
1320 ahd_release_simq(ahd
);
1325 ahd_platform_alloc(struct ahd_softc
*ahd
, void *platform_arg
)
1327 ahd
->platform_data
=
1328 malloc(sizeof(struct ahd_platform_data
), M_DEVBUF
, M_NOWAIT
);
1329 if (ahd
->platform_data
== NULL
)
1331 memset(ahd
->platform_data
, 0, sizeof(struct ahd_platform_data
));
1332 ahd
->platform_data
->irq
= AHD_LINUX_NOIRQ
;
1334 ahd
->seltime
= (aic79xx_seltime
& 0x3) << 4;
1339 ahd_platform_free(struct ahd_softc
*ahd
)
1341 struct scsi_target
*starget
;
1344 if (ahd
->platform_data
!= NULL
) {
1345 /* destroy all of the device and target objects */
1346 for (i
= 0; i
< AHD_NUM_TARGETS
; i
++) {
1347 starget
= ahd
->platform_data
->starget
[i
];
1348 if (starget
!= NULL
) {
1349 ahd
->platform_data
->starget
[i
] = NULL
;
1353 if (ahd
->platform_data
->irq
!= AHD_LINUX_NOIRQ
)
1354 free_irq(ahd
->platform_data
->irq
, ahd
);
1355 if (ahd
->tags
[0] == BUS_SPACE_PIO
1356 && ahd
->bshs
[0].ioport
!= 0)
1357 release_region(ahd
->bshs
[0].ioport
, 256);
1358 if (ahd
->tags
[1] == BUS_SPACE_PIO
1359 && ahd
->bshs
[1].ioport
!= 0)
1360 release_region(ahd
->bshs
[1].ioport
, 256);
1361 if (ahd
->tags
[0] == BUS_SPACE_MEMIO
1362 && ahd
->bshs
[0].maddr
!= NULL
) {
1363 iounmap(ahd
->bshs
[0].maddr
);
1364 release_mem_region(ahd
->platform_data
->mem_busaddr
,
1367 if (ahd
->platform_data
->host
)
1368 scsi_host_put(ahd
->platform_data
->host
);
1370 free(ahd
->platform_data
, M_DEVBUF
);
1375 ahd_platform_init(struct ahd_softc
*ahd
)
1378 * Lookup and commit any modified IO Cell options.
1380 if (ahd
->unit
< ARRAY_SIZE(aic79xx_iocell_info
)) {
1381 const struct ahd_linux_iocell_opts
*iocell_opts
;
1383 iocell_opts
= &aic79xx_iocell_info
[ahd
->unit
];
1384 if (iocell_opts
->precomp
!= AIC79XX_DEFAULT_PRECOMP
)
1385 AHD_SET_PRECOMP(ahd
, iocell_opts
->precomp
);
1386 if (iocell_opts
->slewrate
!= AIC79XX_DEFAULT_SLEWRATE
)
1387 AHD_SET_SLEWRATE(ahd
, iocell_opts
->slewrate
);
1388 if (iocell_opts
->amplitude
!= AIC79XX_DEFAULT_AMPLITUDE
)
1389 AHD_SET_AMPLITUDE(ahd
, iocell_opts
->amplitude
);
1395 ahd_platform_freeze_devq(struct ahd_softc
*ahd
, struct scb
*scb
)
1397 ahd_platform_abort_scbs(ahd
, SCB_GET_TARGET(ahd
, scb
),
1398 SCB_GET_CHANNEL(ahd
, scb
),
1399 SCB_GET_LUN(scb
), SCB_LIST_NULL
,
1400 ROLE_UNKNOWN
, CAM_REQUEUE_REQ
);
1404 ahd_platform_set_tags(struct ahd_softc
*ahd
, struct scsi_device
*sdev
,
1405 struct ahd_devinfo
*devinfo
, ahd_queue_alg alg
)
1407 struct ahd_linux_device
*dev
;
1414 dev
= scsi_transport_device_data(sdev
);
1418 was_queuing
= dev
->flags
& (AHD_DEV_Q_BASIC
|AHD_DEV_Q_TAGGED
);
1421 case AHD_QUEUE_NONE
:
1424 case AHD_QUEUE_BASIC
:
1425 now_queuing
= AHD_DEV_Q_BASIC
;
1427 case AHD_QUEUE_TAGGED
:
1428 now_queuing
= AHD_DEV_Q_TAGGED
;
1431 if ((dev
->flags
& AHD_DEV_FREEZE_TIL_EMPTY
) == 0
1432 && (was_queuing
!= now_queuing
)
1433 && (dev
->active
!= 0)) {
1434 dev
->flags
|= AHD_DEV_FREEZE_TIL_EMPTY
;
1438 dev
->flags
&= ~(AHD_DEV_Q_BASIC
|AHD_DEV_Q_TAGGED
|AHD_DEV_PERIODIC_OTAG
);
1442 usertags
= ahd_linux_user_tagdepth(ahd
, devinfo
);
1445 * Start out agressively and allow our
1446 * dynamic queue depth algorithm to take
1449 dev
->maxtags
= usertags
;
1450 dev
->openings
= dev
->maxtags
- dev
->active
;
1452 if (dev
->maxtags
== 0) {
1454 * Queueing is disabled by the user.
1457 } else if (alg
== AHD_QUEUE_TAGGED
) {
1458 dev
->flags
|= AHD_DEV_Q_TAGGED
;
1459 if (aic79xx_periodic_otag
!= 0)
1460 dev
->flags
|= AHD_DEV_PERIODIC_OTAG
;
1462 dev
->flags
|= AHD_DEV_Q_BASIC
;
1464 /* We can only have one opening. */
1466 dev
->openings
= 1 - dev
->active
;
1469 switch ((dev
->flags
& (AHD_DEV_Q_BASIC
|AHD_DEV_Q_TAGGED
))) {
1470 case AHD_DEV_Q_BASIC
:
1471 scsi_set_tag_type(sdev
, MSG_SIMPLE_TASK
);
1472 scsi_activate_tcq(sdev
, dev
->openings
+ dev
->active
);
1474 case AHD_DEV_Q_TAGGED
:
1475 scsi_set_tag_type(sdev
, MSG_ORDERED_TASK
);
1476 scsi_activate_tcq(sdev
, dev
->openings
+ dev
->active
);
1480 * We allow the OS to queue 2 untagged transactions to
1481 * us at any time even though we can only execute them
1482 * serially on the controller/device. This should
1483 * remove some latency.
1485 scsi_deactivate_tcq(sdev
, 1);
1491 ahd_platform_abort_scbs(struct ahd_softc
*ahd
, int target
, char channel
,
1492 int lun
, u_int tag
, role_t role
, uint32_t status
)
1498 ahd_linux_user_tagdepth(struct ahd_softc
*ahd
, struct ahd_devinfo
*devinfo
)
1500 static int warned_user
;
1504 if ((ahd
->user_discenable
& devinfo
->target_mask
) != 0) {
1505 if (ahd
->unit
>= ARRAY_SIZE(aic79xx_tag_info
)) {
1507 if (warned_user
== 0) {
1509 "aic79xx: WARNING: Insufficient tag_info instances\n"
1510 "aic79xx: for installed controllers. Using defaults\n"
1511 "aic79xx: Please update the aic79xx_tag_info array in\n"
1512 "aic79xx: the aic79xx_osm.c source file.\n");
1515 tags
= AHD_MAX_QUEUE
;
1517 adapter_tag_info_t
*tag_info
;
1519 tag_info
= &aic79xx_tag_info
[ahd
->unit
];
1520 tags
= tag_info
->tag_commands
[devinfo
->target_offset
];
1521 if (tags
> AHD_MAX_QUEUE
)
1522 tags
= AHD_MAX_QUEUE
;
1529 * Determines the queue depth for a given device.
1532 ahd_linux_device_queue_depth(struct scsi_device
*sdev
)
1534 struct ahd_devinfo devinfo
;
1536 struct ahd_softc
*ahd
= *((struct ahd_softc
**)sdev
->host
->hostdata
);
1538 ahd_compile_devinfo(&devinfo
,
1540 sdev
->sdev_target
->id
, sdev
->lun
,
1541 sdev
->sdev_target
->channel
== 0 ? 'A' : 'B',
1543 tags
= ahd_linux_user_tagdepth(ahd
, &devinfo
);
1544 if (tags
!= 0 && sdev
->tagged_supported
!= 0) {
1546 ahd_platform_set_tags(ahd
, sdev
, &devinfo
, AHD_QUEUE_TAGGED
);
1547 ahd_send_async(ahd
, devinfo
.channel
, devinfo
.target
,
1548 devinfo
.lun
, AC_TRANSFER_NEG
);
1549 ahd_print_devinfo(ahd
, &devinfo
);
1550 printf("Tagged Queuing enabled. Depth %d\n", tags
);
1552 ahd_platform_set_tags(ahd
, sdev
, &devinfo
, AHD_QUEUE_NONE
);
1553 ahd_send_async(ahd
, devinfo
.channel
, devinfo
.target
,
1554 devinfo
.lun
, AC_TRANSFER_NEG
);
1559 ahd_linux_run_command(struct ahd_softc
*ahd
, struct ahd_linux_device
*dev
,
1560 struct scsi_cmnd
*cmd
)
1563 struct hardware_scb
*hscb
;
1564 struct ahd_initiator_tinfo
*tinfo
;
1565 struct ahd_tmode_tstate
*tstate
;
1568 unsigned long flags
;
1571 nseg
= scsi_dma_map(cmd
);
1573 return SCSI_MLQUEUE_HOST_BUSY
;
1575 ahd_lock(ahd
, &flags
);
1578 * Get an scb to use.
1580 tinfo
= ahd_fetch_transinfo(ahd
, 'A', ahd
->our_id
,
1581 cmd
->device
->id
, &tstate
);
1582 if ((dev
->flags
& (AHD_DEV_Q_TAGGED
|AHD_DEV_Q_BASIC
)) == 0
1583 || (tinfo
->curr
.ppr_options
& MSG_EXT_PPR_IU_REQ
) != 0) {
1584 col_idx
= AHD_NEVER_COL_IDX
;
1586 col_idx
= AHD_BUILD_COL_IDX(cmd
->device
->id
,
1589 if ((scb
= ahd_get_scb(ahd
, col_idx
)) == NULL
) {
1590 ahd
->flags
|= AHD_RESOURCE_SHORTAGE
;
1591 ahd_unlock(ahd
, &flags
);
1592 scsi_dma_unmap(cmd
);
1593 return SCSI_MLQUEUE_HOST_BUSY
;
1597 scb
->platform_data
->dev
= dev
;
1599 cmd
->host_scribble
= (char *)scb
;
1602 * Fill out basics of the HSCB.
1605 hscb
->scsiid
= BUILD_SCSIID(ahd
, cmd
);
1606 hscb
->lun
= cmd
->device
->lun
;
1607 scb
->hscb
->task_management
= 0;
1608 mask
= SCB_GET_TARGET_MASK(ahd
, scb
);
1610 if ((ahd
->user_discenable
& mask
) != 0)
1611 hscb
->control
|= DISCENB
;
1613 if ((tinfo
->curr
.ppr_options
& MSG_EXT_PPR_IU_REQ
) != 0)
1614 scb
->flags
|= SCB_PACKETIZED
;
1616 if ((tstate
->auto_negotiate
& mask
) != 0) {
1617 scb
->flags
|= SCB_AUTO_NEGOTIATE
;
1618 scb
->hscb
->control
|= MK_MESSAGE
;
1621 if ((dev
->flags
& (AHD_DEV_Q_TAGGED
|AHD_DEV_Q_BASIC
)) != 0) {
1623 uint8_t tag_msgs
[2];
1625 msg_bytes
= scsi_populate_tag_msg(cmd
, tag_msgs
);
1626 if (msg_bytes
&& tag_msgs
[0] != MSG_SIMPLE_TASK
) {
1627 hscb
->control
|= tag_msgs
[0];
1628 if (tag_msgs
[0] == MSG_ORDERED_TASK
)
1629 dev
->commands_since_idle_or_otag
= 0;
1631 if (dev
->commands_since_idle_or_otag
== AHD_OTAG_THRESH
1632 && (dev
->flags
& AHD_DEV_Q_TAGGED
) != 0) {
1633 hscb
->control
|= MSG_ORDERED_TASK
;
1634 dev
->commands_since_idle_or_otag
= 0;
1636 hscb
->control
|= MSG_SIMPLE_TASK
;
1640 hscb
->cdb_len
= cmd
->cmd_len
;
1641 memcpy(hscb
->shared_data
.idata
.cdb
, cmd
->cmnd
, hscb
->cdb_len
);
1643 scb
->platform_data
->xfer_len
= 0;
1644 ahd_set_residual(scb
, 0);
1645 ahd_set_sense_residual(scb
, 0);
1649 void *sg
= scb
->sg_list
;
1650 struct scatterlist
*cur_seg
;
1653 scb
->platform_data
->xfer_len
= 0;
1655 scsi_for_each_sg(cmd
, cur_seg
, nseg
, i
) {
1659 addr
= sg_dma_address(cur_seg
);
1660 len
= sg_dma_len(cur_seg
);
1661 scb
->platform_data
->xfer_len
+= len
;
1662 sg
= ahd_sg_setup(ahd
, scb
, sg
, addr
, len
,
1667 LIST_INSERT_HEAD(&ahd
->pending_scbs
, scb
, pending_links
);
1670 dev
->commands_issued
++;
1672 if ((dev
->flags
& AHD_DEV_PERIODIC_OTAG
) != 0)
1673 dev
->commands_since_idle_or_otag
++;
1674 scb
->flags
|= SCB_ACTIVE
;
1675 ahd_queue_scb(ahd
, scb
);
1677 ahd_unlock(ahd
, &flags
);
1683 * SCSI controller interrupt handler.
1686 ahd_linux_isr(int irq
, void *dev_id
)
1688 struct ahd_softc
*ahd
;
1692 ahd
= (struct ahd_softc
*) dev_id
;
1693 ahd_lock(ahd
, &flags
);
1694 ours
= ahd_intr(ahd
);
1695 ahd_unlock(ahd
, &flags
);
1696 return IRQ_RETVAL(ours
);
1700 ahd_send_async(struct ahd_softc
*ahd
, char channel
,
1701 u_int target
, u_int lun
, ac_code code
)
1704 case AC_TRANSFER_NEG
:
1707 struct scsi_target
*starget
;
1708 struct info_str info
;
1709 struct ahd_initiator_tinfo
*tinfo
;
1710 struct ahd_tmode_tstate
*tstate
;
1711 unsigned int target_ppr_options
;
1713 BUG_ON(target
== CAM_TARGET_WILDCARD
);
1716 info
.length
= sizeof(buf
);
1719 tinfo
= ahd_fetch_transinfo(ahd
, channel
, ahd
->our_id
,
1723 * Don't bother reporting results while
1724 * negotiations are still pending.
1726 if (tinfo
->curr
.period
!= tinfo
->goal
.period
1727 || tinfo
->curr
.width
!= tinfo
->goal
.width
1728 || tinfo
->curr
.offset
!= tinfo
->goal
.offset
1729 || tinfo
->curr
.ppr_options
!= tinfo
->goal
.ppr_options
)
1730 if (bootverbose
== 0)
1734 * Don't bother reporting results that
1735 * are identical to those last reported.
1737 starget
= ahd
->platform_data
->starget
[target
];
1738 if (starget
== NULL
)
1741 target_ppr_options
=
1742 (spi_dt(starget
) ? MSG_EXT_PPR_DT_REQ
: 0)
1743 + (spi_qas(starget
) ? MSG_EXT_PPR_QAS_REQ
: 0)
1744 + (spi_iu(starget
) ? MSG_EXT_PPR_IU_REQ
: 0)
1745 + (spi_rd_strm(starget
) ? MSG_EXT_PPR_RD_STRM
: 0)
1746 + (spi_pcomp_en(starget
) ? MSG_EXT_PPR_PCOMP_EN
: 0)
1747 + (spi_rti(starget
) ? MSG_EXT_PPR_RTI
: 0)
1748 + (spi_wr_flow(starget
) ? MSG_EXT_PPR_WR_FLOW
: 0)
1749 + (spi_hold_mcs(starget
) ? MSG_EXT_PPR_HOLD_MCS
: 0);
1751 if (tinfo
->curr
.period
== spi_period(starget
)
1752 && tinfo
->curr
.width
== spi_width(starget
)
1753 && tinfo
->curr
.offset
== spi_offset(starget
)
1754 && tinfo
->curr
.ppr_options
== target_ppr_options
)
1755 if (bootverbose
== 0)
1758 spi_period(starget
) = tinfo
->curr
.period
;
1759 spi_width(starget
) = tinfo
->curr
.width
;
1760 spi_offset(starget
) = tinfo
->curr
.offset
;
1761 spi_dt(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_DT_REQ
? 1 : 0;
1762 spi_qas(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_QAS_REQ
? 1 : 0;
1763 spi_iu(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_IU_REQ
? 1 : 0;
1764 spi_rd_strm(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_RD_STRM
? 1 : 0;
1765 spi_pcomp_en(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_PCOMP_EN
? 1 : 0;
1766 spi_rti(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_RTI
? 1 : 0;
1767 spi_wr_flow(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_WR_FLOW
? 1 : 0;
1768 spi_hold_mcs(starget
) = tinfo
->curr
.ppr_options
& MSG_EXT_PPR_HOLD_MCS
? 1 : 0;
1769 spi_display_xfer_agreement(starget
);
1774 WARN_ON(lun
!= CAM_LUN_WILDCARD
);
1775 scsi_report_device_reset(ahd
->platform_data
->host
,
1776 channel
- 'A', target
);
1780 if (ahd
->platform_data
->host
!= NULL
) {
1781 scsi_report_bus_reset(ahd
->platform_data
->host
,
1786 panic("ahd_send_async: Unexpected async event");
1791 * Calls the higher level scsi done function and frees the scb.
1794 ahd_done(struct ahd_softc
*ahd
, struct scb
*scb
)
1796 struct scsi_cmnd
*cmd
;
1797 struct ahd_linux_device
*dev
;
1799 if ((scb
->flags
& SCB_ACTIVE
) == 0) {
1800 printf("SCB %d done'd twice\n", SCB_GET_TAG(scb
));
1801 ahd_dump_card_state(ahd
);
1802 panic("Stopping for safety");
1804 LIST_REMOVE(scb
, pending_links
);
1806 dev
= scb
->platform_data
->dev
;
1809 if ((cmd
->result
& (CAM_DEV_QFRZN
<< 16)) != 0) {
1810 cmd
->result
&= ~(CAM_DEV_QFRZN
<< 16);
1813 ahd_linux_unmap_scb(ahd
, scb
);
1816 * Guard against stale sense data.
1817 * The Linux mid-layer assumes that sense
1818 * was retrieved anytime the first byte of
1819 * the sense buffer looks "sane".
1821 cmd
->sense_buffer
[0] = 0;
1822 if (ahd_get_transaction_status(scb
) == CAM_REQ_INPROG
) {
1823 uint32_t amount_xferred
;
1826 ahd_get_transfer_length(scb
) - ahd_get_residual(scb
);
1827 if ((scb
->flags
& SCB_TRANSMISSION_ERROR
) != 0) {
1829 if ((ahd_debug
& AHD_SHOW_MISC
) != 0) {
1830 ahd_print_path(ahd
, scb
);
1831 printf("Set CAM_UNCOR_PARITY\n");
1834 ahd_set_transaction_status(scb
, CAM_UNCOR_PARITY
);
1835 #ifdef AHD_REPORT_UNDERFLOWS
1837 * This code is disabled by default as some
1838 * clients of the SCSI system do not properly
1839 * initialize the underflow parameter. This
1840 * results in spurious termination of commands
1841 * that complete as expected (e.g. underflow is
1842 * allowed as command can return variable amounts
1845 } else if (amount_xferred
< scb
->io_ctx
->underflow
) {
1848 ahd_print_path(ahd
, scb
);
1850 for (i
= 0; i
< scb
->io_ctx
->cmd_len
; i
++)
1851 printf(" 0x%x", scb
->io_ctx
->cmnd
[i
]);
1853 ahd_print_path(ahd
, scb
);
1854 printf("Saw underflow (%ld of %ld bytes). "
1855 "Treated as error\n",
1856 ahd_get_residual(scb
),
1857 ahd_get_transfer_length(scb
));
1858 ahd_set_transaction_status(scb
, CAM_DATA_RUN_ERR
);
1861 ahd_set_transaction_status(scb
, CAM_REQ_CMP
);
1863 } else if (ahd_get_transaction_status(scb
) == CAM_SCSI_STATUS_ERROR
) {
1864 ahd_linux_handle_scsi_status(ahd
, cmd
->device
, scb
);
1867 if (dev
->openings
== 1
1868 && ahd_get_transaction_status(scb
) == CAM_REQ_CMP
1869 && ahd_get_scsi_status(scb
) != SCSI_STATUS_QUEUE_FULL
)
1870 dev
->tag_success_count
++;
1872 * Some devices deal with temporary internal resource
1873 * shortages by returning queue full. When the queue
1874 * full occurrs, we throttle back. Slowly try to get
1875 * back to our previous queue depth.
1877 if ((dev
->openings
+ dev
->active
) < dev
->maxtags
1878 && dev
->tag_success_count
> AHD_TAG_SUCCESS_INTERVAL
) {
1879 dev
->tag_success_count
= 0;
1883 if (dev
->active
== 0)
1884 dev
->commands_since_idle_or_otag
= 0;
1886 if ((scb
->flags
& SCB_RECOVERY_SCB
) != 0) {
1887 printf("Recovery SCB completes\n");
1888 if (ahd_get_transaction_status(scb
) == CAM_BDR_SENT
1889 || ahd_get_transaction_status(scb
) == CAM_REQ_ABORTED
)
1890 ahd_set_transaction_status(scb
, CAM_CMD_TIMEOUT
);
1892 if (ahd
->platform_data
->eh_done
)
1893 complete(ahd
->platform_data
->eh_done
);
1896 ahd_free_scb(ahd
, scb
);
1897 ahd_linux_queue_cmd_complete(ahd
, cmd
);
1901 ahd_linux_handle_scsi_status(struct ahd_softc
*ahd
,
1902 struct scsi_device
*sdev
, struct scb
*scb
)
1904 struct ahd_devinfo devinfo
;
1905 struct ahd_linux_device
*dev
= scsi_transport_device_data(sdev
);
1907 ahd_compile_devinfo(&devinfo
,
1909 sdev
->sdev_target
->id
, sdev
->lun
,
1910 sdev
->sdev_target
->channel
== 0 ? 'A' : 'B',
1914 * We don't currently trust the mid-layer to
1915 * properly deal with queue full or busy. So,
1916 * when one occurs, we tell the mid-layer to
1917 * unconditionally requeue the command to us
1918 * so that we can retry it ourselves. We also
1919 * implement our own throttling mechanism so
1920 * we don't clobber the device with too many
1923 switch (ahd_get_scsi_status(scb
)) {
1926 case SCSI_STATUS_CHECK_COND
:
1927 case SCSI_STATUS_CMD_TERMINATED
:
1929 struct scsi_cmnd
*cmd
;
1932 * Copy sense information to the OS's cmd
1933 * structure if it is available.
1936 if ((scb
->flags
& (SCB_SENSE
|SCB_PKT_SENSE
)) != 0) {
1937 struct scsi_status_iu_header
*siu
;
1941 if (scb
->flags
& SCB_SENSE
) {
1942 sense_size
= min(sizeof(struct scsi_sense_data
)
1943 - ahd_get_sense_residual(scb
),
1944 (u_long
)SCSI_SENSE_BUFFERSIZE
);
1948 * Copy only the sense data into the provided
1951 siu
= (struct scsi_status_iu_header
*)
1953 sense_size
= min_t(size_t,
1954 scsi_4btoul(siu
->sense_length
),
1955 SCSI_SENSE_BUFFERSIZE
);
1956 sense_offset
= SIU_SENSE_OFFSET(siu
);
1959 memset(cmd
->sense_buffer
, 0, SCSI_SENSE_BUFFERSIZE
);
1960 memcpy(cmd
->sense_buffer
,
1961 ahd_get_sense_buf(ahd
, scb
)
1962 + sense_offset
, sense_size
);
1963 cmd
->result
|= (DRIVER_SENSE
<< 24);
1966 if (ahd_debug
& AHD_SHOW_SENSE
) {
1969 printf("Copied %d bytes of sense data at %d:",
1970 sense_size
, sense_offset
);
1971 for (i
= 0; i
< sense_size
; i
++) {
1974 printf("0x%x ", cmd
->sense_buffer
[i
]);
1982 case SCSI_STATUS_QUEUE_FULL
:
1984 * By the time the core driver has returned this
1985 * command, all other commands that were queued
1986 * to us but not the device have been returned.
1987 * This ensures that dev->active is equal to
1988 * the number of commands actually queued to
1991 dev
->tag_success_count
= 0;
1992 if (dev
->active
!= 0) {
1994 * Drop our opening count to the number
1995 * of commands currently outstanding.
1999 if ((ahd_debug
& AHD_SHOW_QFULL
) != 0) {
2000 ahd_print_path(ahd
, scb
);
2001 printf("Dropping tag count to %d\n",
2005 if (dev
->active
== dev
->tags_on_last_queuefull
) {
2007 dev
->last_queuefull_same_count
++;
2009 * If we repeatedly see a queue full
2010 * at the same queue depth, this
2011 * device has a fixed number of tag
2012 * slots. Lock in this tag depth
2013 * so we stop seeing queue fulls from
2016 if (dev
->last_queuefull_same_count
2017 == AHD_LOCK_TAGS_COUNT
) {
2018 dev
->maxtags
= dev
->active
;
2019 ahd_print_path(ahd
, scb
);
2020 printf("Locking max tag count at %d\n",
2024 dev
->tags_on_last_queuefull
= dev
->active
;
2025 dev
->last_queuefull_same_count
= 0;
2027 ahd_set_transaction_status(scb
, CAM_REQUEUE_REQ
);
2028 ahd_set_scsi_status(scb
, SCSI_STATUS_OK
);
2029 ahd_platform_set_tags(ahd
, sdev
, &devinfo
,
2030 (dev
->flags
& AHD_DEV_Q_BASIC
)
2031 ? AHD_QUEUE_BASIC
: AHD_QUEUE_TAGGED
);
2035 * Drop down to a single opening, and treat this
2036 * as if the target returned BUSY SCSI status.
2039 ahd_platform_set_tags(ahd
, sdev
, &devinfo
,
2040 (dev
->flags
& AHD_DEV_Q_BASIC
)
2041 ? AHD_QUEUE_BASIC
: AHD_QUEUE_TAGGED
);
2042 ahd_set_scsi_status(scb
, SCSI_STATUS_BUSY
);
2047 ahd_linux_queue_cmd_complete(struct ahd_softc
*ahd
, struct scsi_cmnd
*cmd
)
2050 int new_status
= DID_OK
;
2051 int do_fallback
= 0;
2055 * Map CAM error codes into Linux Error codes. We
2056 * avoid the conversion so that the DV code has the
2057 * full error information available when making
2058 * state change decisions.
2061 status
= ahd_cmd_get_transaction_status(cmd
);
2063 case CAM_REQ_INPROG
:
2065 new_status
= DID_OK
;
2067 case CAM_AUTOSENSE_FAIL
:
2068 new_status
= DID_ERROR
;
2070 case CAM_SCSI_STATUS_ERROR
:
2071 scsi_status
= ahd_cmd_get_scsi_status(cmd
);
2073 switch(scsi_status
) {
2074 case SCSI_STATUS_CMD_TERMINATED
:
2075 case SCSI_STATUS_CHECK_COND
:
2076 if ((cmd
->result
>> 24) != DRIVER_SENSE
) {
2079 struct scsi_sense_data
*sense
;
2081 sense
= (struct scsi_sense_data
*)
2083 if (sense
->extra_len
>= 5 &&
2084 (sense
->add_sense_code
== 0x47
2085 || sense
->add_sense_code
== 0x48))
2093 case CAM_REQ_ABORTED
:
2094 new_status
= DID_ABORT
;
2097 new_status
= DID_BUS_BUSY
;
2099 case CAM_REQ_INVALID
:
2100 case CAM_PATH_INVALID
:
2101 new_status
= DID_BAD_TARGET
;
2103 case CAM_SEL_TIMEOUT
:
2104 new_status
= DID_NO_CONNECT
;
2106 case CAM_SCSI_BUS_RESET
:
2108 new_status
= DID_RESET
;
2110 case CAM_UNCOR_PARITY
:
2111 new_status
= DID_PARITY
;
2114 case CAM_CMD_TIMEOUT
:
2115 new_status
= DID_TIME_OUT
;
2118 case CAM_REQ_CMP_ERR
:
2119 case CAM_UNEXP_BUSFREE
:
2120 case CAM_DATA_RUN_ERR
:
2121 new_status
= DID_ERROR
;
2126 case CAM_SEQUENCE_FAIL
:
2127 case CAM_CCB_LEN_ERR
:
2128 case CAM_PROVIDE_FAIL
:
2129 case CAM_REQ_TERMIO
:
2130 case CAM_UNREC_HBA_ERROR
:
2131 case CAM_REQ_TOO_BIG
:
2132 new_status
= DID_ERROR
;
2134 case CAM_REQUEUE_REQ
:
2135 new_status
= DID_REQUEUE
;
2138 /* We should never get here */
2139 new_status
= DID_ERROR
;
2144 printf("%s: device overrun (status %x) on %d:%d:%d\n",
2145 ahd_name(ahd
), status
, cmd
->device
->channel
,
2146 cmd
->device
->id
, cmd
->device
->lun
);
2149 ahd_cmd_set_transaction_status(cmd
, new_status
);
2151 cmd
->scsi_done(cmd
);
2155 ahd_freeze_simq(struct ahd_softc
*ahd
)
2157 scsi_block_requests(ahd
->platform_data
->host
);
2161 ahd_release_simq(struct ahd_softc
*ahd
)
2163 scsi_unblock_requests(ahd
->platform_data
->host
);
2167 ahd_linux_queue_abort_cmd(struct scsi_cmnd
*cmd
)
2169 struct ahd_softc
*ahd
;
2170 struct ahd_linux_device
*dev
;
2171 struct scb
*pending_scb
;
2173 u_int active_scbptr
;
2182 ahd_mode_state saved_modes
;
2183 unsigned long flags
;
2188 ahd
= *(struct ahd_softc
**)cmd
->device
->host
->hostdata
;
2190 scmd_printk(KERN_INFO
, cmd
,
2191 "Attempting to queue an ABORT message:");
2194 for (cdb_byte
= 0; cdb_byte
< cmd
->cmd_len
; cdb_byte
++)
2195 printf(" 0x%x", cmd
->cmnd
[cdb_byte
]);
2198 ahd_lock(ahd
, &flags
);
2201 * First determine if we currently own this command.
2202 * Start by searching the device queue. If not found
2203 * there, check the pending_scb list. If not found
2204 * at all, and the system wanted us to just abort the
2205 * command, return success.
2207 dev
= scsi_transport_device_data(cmd
->device
);
2211 * No target device for this command exists,
2212 * so we must not still own the command.
2214 scmd_printk(KERN_INFO
, cmd
, "Is not an active device\n");
2220 * See if we can find a matching cmd in the pending list.
2222 LIST_FOREACH(pending_scb
, &ahd
->pending_scbs
, pending_links
) {
2223 if (pending_scb
->io_ctx
== cmd
)
2227 if (pending_scb
== NULL
) {
2228 scmd_printk(KERN_INFO
, cmd
, "Command not found\n");
2232 if ((pending_scb
->flags
& SCB_RECOVERY_SCB
) != 0) {
2234 * We can't queue two recovery actions using the same SCB
2241 * Ensure that the card doesn't do anything
2242 * behind our back. Also make sure that we
2243 * didn't "just" miss an interrupt that would
2246 was_paused
= ahd_is_paused(ahd
);
2247 ahd_pause_and_flushwork(ahd
);
2250 if ((pending_scb
->flags
& SCB_ACTIVE
) == 0) {
2251 scmd_printk(KERN_INFO
, cmd
, "Command already completed\n");
2255 printf("%s: At time of recovery, card was %spaused\n",
2256 ahd_name(ahd
), was_paused
? "" : "not ");
2257 ahd_dump_card_state(ahd
);
2259 disconnected
= TRUE
;
2260 if (ahd_search_qinfifo(ahd
, cmd
->device
->id
,
2261 cmd
->device
->channel
+ 'A',
2263 pending_scb
->hscb
->tag
,
2264 ROLE_INITIATOR
, CAM_REQ_ABORTED
,
2265 SEARCH_COMPLETE
) > 0) {
2266 printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2267 ahd_name(ahd
), cmd
->device
->channel
,
2268 cmd
->device
->id
, cmd
->device
->lun
);
2273 saved_modes
= ahd_save_modes(ahd
);
2274 ahd_set_modes(ahd
, AHD_MODE_SCSI
, AHD_MODE_SCSI
);
2275 last_phase
= ahd_inb(ahd
, LASTPHASE
);
2276 saved_scbptr
= ahd_get_scbptr(ahd
);
2277 active_scbptr
= saved_scbptr
;
2278 if (disconnected
&& (ahd_inb(ahd
, SEQ_FLAGS
) & NOT_IDENTIFIED
) == 0) {
2279 struct scb
*bus_scb
;
2281 bus_scb
= ahd_lookup_scb(ahd
, active_scbptr
);
2282 if (bus_scb
== pending_scb
)
2283 disconnected
= FALSE
;
2287 * At this point, pending_scb is the scb associated with the
2288 * passed in command. That command is currently active on the
2289 * bus or is in the disconnected state.
2291 saved_scsiid
= ahd_inb(ahd
, SAVED_SCSIID
);
2292 if (last_phase
!= P_BUSFREE
2293 && SCB_GET_TAG(pending_scb
) == active_scbptr
) {
2296 * We're active on the bus, so assert ATN
2297 * and hope that the target responds.
2299 pending_scb
= ahd_lookup_scb(ahd
, active_scbptr
);
2300 pending_scb
->flags
|= SCB_RECOVERY_SCB
|SCB_ABORT
;
2301 ahd_outb(ahd
, MSG_OUT
, HOST_MSG
);
2302 ahd_outb(ahd
, SCSISIGO
, last_phase
|ATNO
);
2303 scmd_printk(KERN_INFO
, cmd
, "Device is active, asserting ATN\n");
2305 } else if (disconnected
) {
2308 * Actually re-queue this SCB in an attempt
2309 * to select the device before it reconnects.
2311 pending_scb
->flags
|= SCB_RECOVERY_SCB
|SCB_ABORT
;
2312 ahd_set_scbptr(ahd
, SCB_GET_TAG(pending_scb
));
2313 pending_scb
->hscb
->cdb_len
= 0;
2314 pending_scb
->hscb
->task_attribute
= 0;
2315 pending_scb
->hscb
->task_management
= SIU_TASKMGMT_ABORT_TASK
;
2317 if ((pending_scb
->flags
& SCB_PACKETIZED
) != 0) {
2319 * Mark the SCB has having an outstanding
2320 * task management function. Should the command
2321 * complete normally before the task management
2322 * function can be sent, the host will be notified
2323 * to abort our requeued SCB.
2325 ahd_outb(ahd
, SCB_TASK_MANAGEMENT
,
2326 pending_scb
->hscb
->task_management
);
2329 * If non-packetized, set the MK_MESSAGE control
2330 * bit indicating that we desire to send a message.
2331 * We also set the disconnected flag since there is
2332 * no guarantee that our SCB control byte matches
2333 * the version on the card. We don't want the
2334 * sequencer to abort the command thinking an
2335 * unsolicited reselection occurred.
2337 pending_scb
->hscb
->control
|= MK_MESSAGE
|DISCONNECTED
;
2340 * The sequencer will never re-reference the
2341 * in-core SCB. To make sure we are notified
2342 * during reslection, set the MK_MESSAGE flag in
2343 * the card's copy of the SCB.
2345 ahd_outb(ahd
, SCB_CONTROL
,
2346 ahd_inb(ahd
, SCB_CONTROL
)|MK_MESSAGE
);
2350 * Clear out any entries in the QINFIFO first
2351 * so we are the next SCB for this target
2354 ahd_search_qinfifo(ahd
, cmd
->device
->id
,
2355 cmd
->device
->channel
+ 'A', cmd
->device
->lun
,
2356 SCB_LIST_NULL
, ROLE_INITIATOR
,
2357 CAM_REQUEUE_REQ
, SEARCH_COMPLETE
);
2358 ahd_qinfifo_requeue_tail(ahd
, pending_scb
);
2359 ahd_set_scbptr(ahd
, saved_scbptr
);
2360 ahd_print_path(ahd
, pending_scb
);
2361 printf("Device is disconnected, re-queuing SCB\n");
2364 scmd_printk(KERN_INFO
, cmd
, "Unable to deliver message\n");
2371 * Our assumption is that if we don't have the command, no
2372 * recovery action was required, so we return success. Again,
2373 * the semantics of the mid-layer recovery engine are not
2374 * well defined, so this may change in time.
2381 DECLARE_COMPLETION_ONSTACK(done
);
2383 ahd
->platform_data
->eh_done
= &done
;
2384 ahd_unlock(ahd
, &flags
);
2386 printf("%s: Recovery code sleeping\n", ahd_name(ahd
));
2387 if (!wait_for_completion_timeout(&done
, 5 * HZ
)) {
2388 ahd_lock(ahd
, &flags
);
2389 ahd
->platform_data
->eh_done
= NULL
;
2390 ahd_unlock(ahd
, &flags
);
2391 printf("%s: Timer Expired (active %d)\n",
2392 ahd_name(ahd
), dev
->active
);
2395 printf("Recovery code awake\n");
2397 ahd_unlock(ahd
, &flags
);
2399 if (retval
!= SUCCESS
)
2400 printf("%s: Command abort returning 0x%x\n",
2401 ahd_name(ahd
), retval
);
2406 static void ahd_linux_set_width(struct scsi_target
*starget
, int width
)
2408 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2409 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2410 struct ahd_devinfo devinfo
;
2411 unsigned long flags
;
2413 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2414 starget
->channel
+ 'A', ROLE_INITIATOR
);
2415 ahd_lock(ahd
, &flags
);
2416 ahd_set_width(ahd
, &devinfo
, width
, AHD_TRANS_GOAL
, FALSE
);
2417 ahd_unlock(ahd
, &flags
);
2420 static void ahd_linux_set_period(struct scsi_target
*starget
, int period
)
2422 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2423 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2424 struct ahd_tmode_tstate
*tstate
;
2425 struct ahd_initiator_tinfo
*tinfo
2426 = ahd_fetch_transinfo(ahd
,
2427 starget
->channel
+ 'A',
2428 shost
->this_id
, starget
->id
, &tstate
);
2429 struct ahd_devinfo devinfo
;
2430 unsigned int ppr_options
= tinfo
->goal
.ppr_options
;
2432 unsigned long flags
;
2433 unsigned long offset
= tinfo
->goal
.offset
;
2436 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2437 printf("%s: set period to %d\n", ahd_name(ahd
), period
);
2440 offset
= MAX_OFFSET
;
2445 if (spi_max_width(starget
)) {
2446 ppr_options
|= MSG_EXT_PPR_DT_REQ
;
2448 ppr_options
|= MSG_EXT_PPR_IU_REQ
;
2453 dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2455 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2456 starget
->channel
+ 'A', ROLE_INITIATOR
);
2458 /* all PPR requests apart from QAS require wide transfers */
2459 if (ppr_options
& ~MSG_EXT_PPR_QAS_REQ
) {
2460 if (spi_width(starget
) == 0)
2461 ppr_options
&= MSG_EXT_PPR_QAS_REQ
;
2464 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2465 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2467 ahd_lock(ahd
, &flags
);
2468 ahd_set_syncrate(ahd
, &devinfo
, period
, offset
,
2469 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2470 ahd_unlock(ahd
, &flags
);
2473 static void ahd_linux_set_offset(struct scsi_target
*starget
, int offset
)
2475 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2476 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2477 struct ahd_tmode_tstate
*tstate
;
2478 struct ahd_initiator_tinfo
*tinfo
2479 = ahd_fetch_transinfo(ahd
,
2480 starget
->channel
+ 'A',
2481 shost
->this_id
, starget
->id
, &tstate
);
2482 struct ahd_devinfo devinfo
;
2483 unsigned int ppr_options
= 0;
2484 unsigned int period
= 0;
2485 unsigned int dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2486 unsigned long flags
;
2489 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2490 printf("%s: set offset to %d\n", ahd_name(ahd
), offset
);
2493 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2494 starget
->channel
+ 'A', ROLE_INITIATOR
);
2496 period
= tinfo
->goal
.period
;
2497 ppr_options
= tinfo
->goal
.ppr_options
;
2498 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2499 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2502 ahd_lock(ahd
, &flags
);
2503 ahd_set_syncrate(ahd
, &devinfo
, period
, offset
, ppr_options
,
2504 AHD_TRANS_GOAL
, FALSE
);
2505 ahd_unlock(ahd
, &flags
);
2508 static void ahd_linux_set_dt(struct scsi_target
*starget
, int dt
)
2510 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2511 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2512 struct ahd_tmode_tstate
*tstate
;
2513 struct ahd_initiator_tinfo
*tinfo
2514 = ahd_fetch_transinfo(ahd
,
2515 starget
->channel
+ 'A',
2516 shost
->this_id
, starget
->id
, &tstate
);
2517 struct ahd_devinfo devinfo
;
2518 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2519 & ~MSG_EXT_PPR_DT_REQ
;
2520 unsigned int period
= tinfo
->goal
.period
;
2521 unsigned int width
= tinfo
->goal
.width
;
2522 unsigned long flags
;
2525 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2526 printf("%s: %s DT\n", ahd_name(ahd
),
2527 dt
? "enabling" : "disabling");
2529 if (dt
&& spi_max_width(starget
)) {
2530 ppr_options
|= MSG_EXT_PPR_DT_REQ
;
2532 ahd_linux_set_width(starget
, 1);
2535 period
= 10; /* If resetting DT, period must be >= 25ns */
2536 /* IU is invalid without DT set */
2537 ppr_options
&= ~MSG_EXT_PPR_IU_REQ
;
2539 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2540 starget
->channel
+ 'A', ROLE_INITIATOR
);
2541 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2542 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2544 ahd_lock(ahd
, &flags
);
2545 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2546 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2547 ahd_unlock(ahd
, &flags
);
2550 static void ahd_linux_set_qas(struct scsi_target
*starget
, int qas
)
2552 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2553 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2554 struct ahd_tmode_tstate
*tstate
;
2555 struct ahd_initiator_tinfo
*tinfo
2556 = ahd_fetch_transinfo(ahd
,
2557 starget
->channel
+ 'A',
2558 shost
->this_id
, starget
->id
, &tstate
);
2559 struct ahd_devinfo devinfo
;
2560 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2561 & ~MSG_EXT_PPR_QAS_REQ
;
2562 unsigned int period
= tinfo
->goal
.period
;
2564 unsigned long flags
;
2567 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2568 printf("%s: %s QAS\n", ahd_name(ahd
),
2569 qas
? "enabling" : "disabling");
2573 ppr_options
|= MSG_EXT_PPR_QAS_REQ
;
2576 dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2578 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2579 starget
->channel
+ 'A', ROLE_INITIATOR
);
2580 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2581 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2583 ahd_lock(ahd
, &flags
);
2584 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2585 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2586 ahd_unlock(ahd
, &flags
);
2589 static void ahd_linux_set_iu(struct scsi_target
*starget
, int iu
)
2591 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2592 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2593 struct ahd_tmode_tstate
*tstate
;
2594 struct ahd_initiator_tinfo
*tinfo
2595 = ahd_fetch_transinfo(ahd
,
2596 starget
->channel
+ 'A',
2597 shost
->this_id
, starget
->id
, &tstate
);
2598 struct ahd_devinfo devinfo
;
2599 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2600 & ~MSG_EXT_PPR_IU_REQ
;
2601 unsigned int period
= tinfo
->goal
.period
;
2603 unsigned long flags
;
2606 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2607 printf("%s: %s IU\n", ahd_name(ahd
),
2608 iu
? "enabling" : "disabling");
2611 if (iu
&& spi_max_width(starget
)) {
2612 ppr_options
|= MSG_EXT_PPR_IU_REQ
;
2613 ppr_options
|= MSG_EXT_PPR_DT_REQ
; /* IU requires DT */
2616 dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2618 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2619 starget
->channel
+ 'A', ROLE_INITIATOR
);
2620 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2621 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2623 ahd_lock(ahd
, &flags
);
2624 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2625 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2626 ahd_unlock(ahd
, &flags
);
2629 static void ahd_linux_set_rd_strm(struct scsi_target
*starget
, int rdstrm
)
2631 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2632 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2633 struct ahd_tmode_tstate
*tstate
;
2634 struct ahd_initiator_tinfo
*tinfo
2635 = ahd_fetch_transinfo(ahd
,
2636 starget
->channel
+ 'A',
2637 shost
->this_id
, starget
->id
, &tstate
);
2638 struct ahd_devinfo devinfo
;
2639 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2640 & ~MSG_EXT_PPR_RD_STRM
;
2641 unsigned int period
= tinfo
->goal
.period
;
2642 unsigned int dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2643 unsigned long flags
;
2646 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2647 printf("%s: %s Read Streaming\n", ahd_name(ahd
),
2648 rdstrm
? "enabling" : "disabling");
2651 if (rdstrm
&& spi_max_width(starget
))
2652 ppr_options
|= MSG_EXT_PPR_RD_STRM
;
2654 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2655 starget
->channel
+ 'A', ROLE_INITIATOR
);
2656 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2657 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2659 ahd_lock(ahd
, &flags
);
2660 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2661 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2662 ahd_unlock(ahd
, &flags
);
2665 static void ahd_linux_set_wr_flow(struct scsi_target
*starget
, int wrflow
)
2667 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2668 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2669 struct ahd_tmode_tstate
*tstate
;
2670 struct ahd_initiator_tinfo
*tinfo
2671 = ahd_fetch_transinfo(ahd
,
2672 starget
->channel
+ 'A',
2673 shost
->this_id
, starget
->id
, &tstate
);
2674 struct ahd_devinfo devinfo
;
2675 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2676 & ~MSG_EXT_PPR_WR_FLOW
;
2677 unsigned int period
= tinfo
->goal
.period
;
2678 unsigned int dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2679 unsigned long flags
;
2682 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2683 printf("%s: %s Write Flow Control\n", ahd_name(ahd
),
2684 wrflow
? "enabling" : "disabling");
2687 if (wrflow
&& spi_max_width(starget
))
2688 ppr_options
|= MSG_EXT_PPR_WR_FLOW
;
2690 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2691 starget
->channel
+ 'A', ROLE_INITIATOR
);
2692 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2693 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2695 ahd_lock(ahd
, &flags
);
2696 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2697 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2698 ahd_unlock(ahd
, &flags
);
2701 static void ahd_linux_set_rti(struct scsi_target
*starget
, int rti
)
2703 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2704 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2705 struct ahd_tmode_tstate
*tstate
;
2706 struct ahd_initiator_tinfo
*tinfo
2707 = ahd_fetch_transinfo(ahd
,
2708 starget
->channel
+ 'A',
2709 shost
->this_id
, starget
->id
, &tstate
);
2710 struct ahd_devinfo devinfo
;
2711 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2713 unsigned int period
= tinfo
->goal
.period
;
2714 unsigned int dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2715 unsigned long flags
;
2717 if ((ahd
->features
& AHD_RTI
) == 0) {
2719 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2720 printf("%s: RTI not available\n", ahd_name(ahd
));
2726 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2727 printf("%s: %s RTI\n", ahd_name(ahd
),
2728 rti
? "enabling" : "disabling");
2731 if (rti
&& spi_max_width(starget
))
2732 ppr_options
|= MSG_EXT_PPR_RTI
;
2734 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2735 starget
->channel
+ 'A', ROLE_INITIATOR
);
2736 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2737 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2739 ahd_lock(ahd
, &flags
);
2740 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2741 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2742 ahd_unlock(ahd
, &flags
);
2745 static void ahd_linux_set_pcomp_en(struct scsi_target
*starget
, int pcomp
)
2747 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2748 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2749 struct ahd_tmode_tstate
*tstate
;
2750 struct ahd_initiator_tinfo
*tinfo
2751 = ahd_fetch_transinfo(ahd
,
2752 starget
->channel
+ 'A',
2753 shost
->this_id
, starget
->id
, &tstate
);
2754 struct ahd_devinfo devinfo
;
2755 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2756 & ~MSG_EXT_PPR_PCOMP_EN
;
2757 unsigned int period
= tinfo
->goal
.period
;
2758 unsigned int dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2759 unsigned long flags
;
2762 if ((ahd_debug
& AHD_SHOW_DV
) != 0)
2763 printf("%s: %s Precompensation\n", ahd_name(ahd
),
2764 pcomp
? "Enable" : "Disable");
2767 if (pcomp
&& spi_max_width(starget
)) {
2770 if (ahd
->unit
< ARRAY_SIZE(aic79xx_iocell_info
)) {
2771 const struct ahd_linux_iocell_opts
*iocell_opts
;
2773 iocell_opts
= &aic79xx_iocell_info
[ahd
->unit
];
2774 precomp
= iocell_opts
->precomp
;
2776 precomp
= AIC79XX_DEFAULT_PRECOMP
;
2778 ppr_options
|= MSG_EXT_PPR_PCOMP_EN
;
2779 AHD_SET_PRECOMP(ahd
, precomp
);
2781 AHD_SET_PRECOMP(ahd
, 0);
2784 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2785 starget
->channel
+ 'A', ROLE_INITIATOR
);
2786 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2787 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2789 ahd_lock(ahd
, &flags
);
2790 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2791 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2792 ahd_unlock(ahd
, &flags
);
2795 static void ahd_linux_set_hold_mcs(struct scsi_target
*starget
, int hold
)
2797 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
2798 struct ahd_softc
*ahd
= *((struct ahd_softc
**)shost
->hostdata
);
2799 struct ahd_tmode_tstate
*tstate
;
2800 struct ahd_initiator_tinfo
*tinfo
2801 = ahd_fetch_transinfo(ahd
,
2802 starget
->channel
+ 'A',
2803 shost
->this_id
, starget
->id
, &tstate
);
2804 struct ahd_devinfo devinfo
;
2805 unsigned int ppr_options
= tinfo
->goal
.ppr_options
2806 & ~MSG_EXT_PPR_HOLD_MCS
;
2807 unsigned int period
= tinfo
->goal
.period
;
2808 unsigned int dt
= ppr_options
& MSG_EXT_PPR_DT_REQ
;
2809 unsigned long flags
;
2811 if (hold
&& spi_max_width(starget
))
2812 ppr_options
|= MSG_EXT_PPR_HOLD_MCS
;
2814 ahd_compile_devinfo(&devinfo
, shost
->this_id
, starget
->id
, 0,
2815 starget
->channel
+ 'A', ROLE_INITIATOR
);
2816 ahd_find_syncrate(ahd
, &period
, &ppr_options
,
2817 dt
? AHD_SYNCRATE_MAX
: AHD_SYNCRATE_ULTRA2
);
2819 ahd_lock(ahd
, &flags
);
2820 ahd_set_syncrate(ahd
, &devinfo
, period
, tinfo
->goal
.offset
,
2821 ppr_options
, AHD_TRANS_GOAL
, FALSE
);
2822 ahd_unlock(ahd
, &flags
);
2825 static void ahd_linux_get_signalling(struct Scsi_Host
*shost
)
2827 struct ahd_softc
*ahd
= *(struct ahd_softc
**)shost
->hostdata
;
2828 unsigned long flags
;
2831 ahd_lock(ahd
, &flags
);
2833 mode
= ahd_inb(ahd
, SBLKCTL
);
2835 ahd_unlock(ahd
, &flags
);
2838 spi_signalling(shost
) = SPI_SIGNAL_LVD
;
2839 else if (mode
& ENAB20
)
2840 spi_signalling(shost
) = SPI_SIGNAL_SE
;
2842 spi_signalling(shost
) = SPI_SIGNAL_UNKNOWN
;
2845 static struct spi_function_template ahd_linux_transport_functions
= {
2846 .set_offset
= ahd_linux_set_offset
,
2848 .set_period
= ahd_linux_set_period
,
2850 .set_width
= ahd_linux_set_width
,
2852 .set_dt
= ahd_linux_set_dt
,
2854 .set_iu
= ahd_linux_set_iu
,
2856 .set_qas
= ahd_linux_set_qas
,
2858 .set_rd_strm
= ahd_linux_set_rd_strm
,
2860 .set_wr_flow
= ahd_linux_set_wr_flow
,
2862 .set_rti
= ahd_linux_set_rti
,
2864 .set_pcomp_en
= ahd_linux_set_pcomp_en
,
2866 .set_hold_mcs
= ahd_linux_set_hold_mcs
,
2868 .get_signalling
= ahd_linux_get_signalling
,
2872 ahd_linux_init(void)
2877 * If we've been passed any parameters, process them now.
2880 aic79xx_setup(aic79xx
);
2882 ahd_linux_transport_template
=
2883 spi_attach_transport(&ahd_linux_transport_functions
);
2884 if (!ahd_linux_transport_template
)
2887 scsi_transport_reserve_device(ahd_linux_transport_template
,
2888 sizeof(struct ahd_linux_device
));
2890 error
= ahd_linux_pci_init();
2892 spi_release_transport(ahd_linux_transport_template
);
2897 ahd_linux_exit(void)
2899 ahd_linux_pci_exit();
2900 spi_release_transport(ahd_linux_transport_template
);
2903 module_init(ahd_linux_init
);
2904 module_exit(ahd_linux_exit
);