drivers/usb/host/ohci-pci.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * [ Initialisation is based on Linus'  ]
   8  * [ uhci code and gregs ohci fragments ]
   9  * [ (C) Copyright 1999 Linus Torvalds  ]
  10  * [ (C) Copyright 1999 Gregory P. Smith]
  11  *
  12  * PCI Bus Glue
  13  *
  14  * This file is licenced under the GPL.
  15  */
  16
  17 #ifndef CONFIG_PCI
  18 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
  19 #endif
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 static int broken_suspend(struct usb_hcd *hcd)
  24 {
  25         device_init_wakeup(&hcd->self.root_hub->dev, 0);
  26         return 0;
  27 }
  28
  29 /* AMD 756, for most chips (early revs), corrupts register
  30  * values on read ... so enable the vendor workaround.
  31  */
  32 static int ohci_quirk_amd756(struct usb_hcd *hcd)
  33 {
  34         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  35
  36         ohci->flags = OHCI_QUIRK_AMD756;
  37         ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
  38
  39         /* also erratum 10 (suspend/resume issues) */
  40         return broken_suspend(hcd);
  41 }
  42
  43 /* Apple's OHCI driver has a lot of bizarre workarounds
  44  * for this chip.  Evidently control and bulk lists
  45  * can get confused.  (B&W G3 models, and ...)
  46  */
  47 static int ohci_quirk_opti(struct usb_hcd *hcd)
  48 {
  49         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  50
  51         ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
  52
  53         return 0;
  54 }
  55
  56 /* Check for NSC87560. We have to look at the bridge (fn1) to
  57  * identify the USB (fn2). This quirk might apply to more or
  58  * even all NSC stuff.
  59  */
  60 static int ohci_quirk_ns(struct usb_hcd *hcd)
  61 {
  62         struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
  63         struct pci_dev  *b;
  64
  65         b  = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
  66         if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
  67             && b->vendor == PCI_VENDOR_ID_NS) {
  68                 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  69
  70                 ohci->flags |= OHCI_QUIRK_SUPERIO;
  71                 ohci_dbg (ohci, "Using NSC SuperIO setup\n");
  72         }
  73         pci_dev_put(b);
  74
  75         return 0;
  76 }
  77
  78 /* Check for Compaq's ZFMicro chipset, which needs short
  79  * delays before control or bulk queues get re-activated
  80  * in finish_unlinks()
  81  */
  82 static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
  83 {
  84         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  85
  86         ohci->flags |= OHCI_QUIRK_ZFMICRO;
  87         ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
  88
  89         return 0;
  90 }
  91
  92 /* Check for Toshiba SCC OHCI which has big endian registers
  93  * and little endian in memory data structures
  94  */
  95 static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
  96 {
  97         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  98
  99         /* That chip is only present in the southbridge of some
 100          * cell based platforms which are supposed to select
 101          * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
 102          * that was the case though.
 103          */
 104 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
 105         ohci->flags |= OHCI_QUIRK_BE_MMIO;
 106         ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
 107         return 0;
 108 #else
 109         ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
 110         return -ENXIO;
 111 #endif
 112 }
 113
 114 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
 115  */
 116
 117 static void ohci_quirk_nec_worker(struct work_struct *work)
 118 {
 119         struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
 120         int status;
 121
 122         status = ohci_init(ohci);
 123         if (status != 0) {
 124                 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
 125                          "ohci_init", status);
 126                 return;
 127         }
 128
 129         status = ohci_restart(ohci);
 130         if (status != 0)
 131                 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
 132                          "ohci_restart", status);
 133 }
 134
 135 static int ohci_quirk_nec(struct usb_hcd *hcd)
 136 {
 137         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 138
 139         ohci->flags |= OHCI_QUIRK_NEC;
 140         INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
 141         ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
 142
 143         return 0;
 144 }
 145
 146 /* List of quirks for OHCI */
 147 static const struct pci_device_id ohci_pci_quirks[] = {
 148         {
 149                 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
 150                 .driver_data = (unsigned long)ohci_quirk_amd756,
 151         },
 152         {
 153                 PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
 154                 .driver_data = (unsigned long)ohci_quirk_opti,
 155         },
 156         {
 157                 PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
 158                 .driver_data = (unsigned long)ohci_quirk_ns,
 159         },
 160         {
 161                 PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
 162                 .driver_data = (unsigned long)ohci_quirk_zfmicro,
 163         },
 164         {
 165                 PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
 166                 .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
 167         },
 168         {
 169                 PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
 170                 .driver_data = (unsigned long)ohci_quirk_nec,
 171         },
 172         {
 173                 /* Toshiba portege 4000 */
 174                 .vendor         = PCI_VENDOR_ID_AL,
 175                 .device         = 0x5237,
 176                 .subvendor      = PCI_VENDOR_ID_TOSHIBA,
 177                 .subdevice      = 0x0004,
 178                 .driver_data    = (unsigned long) broken_suspend,
 179         },
 180         {
 181                 PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 182                 .driver_data = (unsigned long) broken_suspend,
 183         },
 184         /* FIXME for some of the early AMD 760 southbridges, OHCI
 185          * won't work at all.  blacklist them.
 186          */
 187
 188         {},
 189 };
 190
 191 static int ohci_pci_reset (struct usb_hcd *hcd)
 192 {
 193         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 194         int ret = 0;
 195
 196         if (hcd->self.controller) {
 197                 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 198                 const struct pci_device_id *quirk_id;
 199
 200                 quirk_id = pci_match_id(ohci_pci_quirks, pdev);
 201                 if (quirk_id != NULL) {
 202                         int (*quirk)(struct usb_hcd *ohci);
 203                         quirk = (void *)quirk_id->driver_data;
 204                         ret = quirk(hcd);
 205                 }
 206         }
 207         if (ret == 0) {
 208                 ohci_hcd_init (ohci);
 209                 return ohci_init (ohci);
 210         }
 211         return ret;
 212 }
 213
 214
 215 static int __devinit ohci_pci_start (struct usb_hcd *hcd)
 216 {
 217         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 218         int             ret;
 219
 220 #ifdef CONFIG_PM /* avoid warnings about unused pdev */
 221         if (hcd->self.controller) {
 222                 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 223
 224                 /* RWC may not be set for add-in PCI cards, since boot
 225                  * firmware probably ignored them.  This transfers PCI
 226                  * PM wakeup capabilities (once the PCI layer is fixed).
 227                  */
 228                 if (device_may_wakeup(&pdev->dev))
 229                         ohci->hc_control |= OHCI_CTRL_RWC;
 230         }
 231 #endif /* CONFIG_PM */
 232
 233         ret = ohci_run (ohci);
 234         if (ret < 0) {
 235                 ohci_err (ohci, "can't start\n");
 236                 ohci_stop (hcd);
 237         }
 238         return ret;
 239 }
 240
 241 #ifdef  CONFIG_PM
 242
 243 static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
 244 {
 245         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 246         unsigned long   flags;
 247         int             rc = 0;
 248
 249         /* Root hub was already suspended. Disable irq emission and
 250          * mark HW unaccessible, bail out if RH has been resumed. Use
 251          * the spinlock to properly synchronize with possible pending
 252          * RH suspend or resume activity.
 253          *
 254          * This is still racy as hcd->state is manipulated outside of
 255          * any locks =P But that will be a different fix.
 256          */
 257         spin_lock_irqsave (&ohci->lock, flags);
 258         if (hcd->state != HC_STATE_SUSPENDED) {
 259                 rc = -EINVAL;
 260                 goto bail;
 261         }
 262         ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 263         (void)ohci_readl(ohci, &ohci->regs->intrdisable);
 264
 265         /* make sure snapshot being resumed re-enumerates everything */
 266         if (message.event == PM_EVENT_PRETHAW)
 267                 ohci_usb_reset(ohci);
 268
 269         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 270  bail:
 271         spin_unlock_irqrestore (&ohci->lock, flags);
 272
 273         return rc;
 274 }
 275
 276
 277 static int ohci_pci_resume (struct usb_hcd *hcd)
 278 {
 279         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 280         ohci_finish_controller_resume(hcd);
 281         return 0;
 282 }
 283
 284 #endif  /* CONFIG_PM */
 285
 286
 287 /*-------------------------------------------------------------------------*/
 288
 289 static const struct hc_driver ohci_pci_hc_driver = {
 290         .description =          hcd_name,
 291         .product_desc =         "OHCI Host Controller",
 292         .hcd_priv_size =        sizeof(struct ohci_hcd),
 293
 294         /*
 295          * generic hardware linkage
 296          */
 297         .irq =                  ohci_irq,
 298         .flags =                HCD_MEMORY | HCD_USB11,
 299
 300         /*
 301          * basic lifecycle operations
 302          */
 303         .reset =                ohci_pci_reset,
 304         .start =                ohci_pci_start,
 305         .stop =                 ohci_stop,
 306         .shutdown =             ohci_shutdown,
 307
 308 #ifdef  CONFIG_PM
 309         .pci_suspend =          ohci_pci_suspend,
 310         .pci_resume =           ohci_pci_resume,
 311 #endif
 312
 313         /*
 314          * managing i/o requests and associated device resources
 315          */
 316         .urb_enqueue =          ohci_urb_enqueue,
 317         .urb_dequeue =          ohci_urb_dequeue,
 318         .endpoint_disable =     ohci_endpoint_disable,
 319
 320         /*
 321          * scheduling support
 322          */
 323         .get_frame_number =     ohci_get_frame,
 324
 325         /*
 326          * root hub support
 327          */
 328         .hub_status_data =      ohci_hub_status_data,
 329         .hub_control =          ohci_hub_control,
 330 #ifdef  CONFIG_PM
 331         .bus_suspend =          ohci_bus_suspend,
 332         .bus_resume =           ohci_bus_resume,
 333 #endif
 334         .start_port_reset =     ohci_start_port_reset,
 335 };
 336
 337 /*-------------------------------------------------------------------------*/
 338
 339
 340 static const struct pci_device_id pci_ids [] = { {
 341         /* handle any USB OHCI controller */
 342         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 343         .driver_data =  (unsigned long) &ohci_pci_hc_driver,
 344         }, { /* end: all zeroes */ }
 345 };
 346 MODULE_DEVICE_TABLE (pci, pci_ids);
 347
 348 /* pci driver glue; this is a "new style" PCI driver module */
 349 static struct pci_driver ohci_pci_driver = {
 350         .name =         (char *) hcd_name,
 351         .id_table =     pci_ids,
 352
 353         .probe =        usb_hcd_pci_probe,
 354         .remove =       usb_hcd_pci_remove,
 355
 356 #ifdef  CONFIG_PM
 357         .suspend =      usb_hcd_pci_suspend,
 358         .resume =       usb_hcd_pci_resume,
 359 #endif
 360
 361         .shutdown =     usb_hcd_pci_shutdown,
 362 };
 363