1 /* Copyright (C) by Paul Barton-Davis 1998-1999
3 * Some portions of this file are taken from work that is
4 * copyright (C) by Hannu Savolainen 1993-1996
6 * This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
7 * Version 2 (June 1991). See the "COPYING" file distributed with this software
12 * An ALSA lowlevel driver for Turtle Beach ICS2115 wavetable synth
13 * (Maui, Tropez, Tropez Plus)
15 * This driver supports the onboard wavetable synthesizer (an ICS2115),
16 * including patch, sample and program loading and unloading, conversion
17 * of GUS patches during loading, and full user-level access to all
18 * WaveFront commands. It tries to provide semi-intelligent patch and
19 * sample management as well.
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/time.h>
28 #include <linux/wait.h>
29 #include <linux/firmware.h>
30 #include <linux/moduleparam.h>
31 #include <sound/core.h>
32 #include <sound/snd_wavefront.h>
33 #include <sound/initval.h>
35 static int wf_raw
= 0; /* we normally check for "raw state" to firmware
36 loading. if non-zero, then during driver loading, the
37 state of the board is ignored, and we reset the
38 board and load the firmware anyway.
41 static int fx_raw
= 1; /* if this is zero, we'll leave the FX processor in
42 whatever state it is when the driver is loaded.
43 The default is to download the microprogram and
44 associated coefficients to set it up for "default"
45 operation, whatever that means.
48 static int debug_default
= 0; /* you can set this to control debugging
49 during driver loading. it takes any combination
50 of the WF_DEBUG_* flags defined in
54 /* XXX this needs to be made firmware and hardware version dependent */
56 #define DEFAULT_OSPATH "wavefront.os"
57 static char *ospath
= DEFAULT_OSPATH
; /* the firmware file name */
59 static int wait_usecs
= 150; /* This magic number seems to give pretty optimal
60 throughput based on my limited experimentation.
61 If you want to play around with it and find a better
62 value, be my guest. Remember, the idea is to
63 get a number that causes us to just busy wait
64 for as many WaveFront commands as possible, without
65 coming up with a number so large that we hog the
68 Specifically, with this number, out of about 134,000
69 status waits, only about 250 result in a sleep.
72 static int sleep_interval
= 100; /* HZ/sleep_interval seconds per sleep */
73 static int sleep_tries
= 50; /* number of times we'll try to sleep */
75 static int reset_time
= 2; /* hundreths of a second we wait after a HW
76 reset for the expected interrupt.
79 static int ramcheck_time
= 20; /* time in seconds to wait while ROM code
83 static int osrun_time
= 10; /* time in seconds we wait for the OS to
86 module_param(wf_raw
, int, 0444);
87 MODULE_PARM_DESC(wf_raw
, "if non-zero, assume that we need to boot the OS");
88 module_param(fx_raw
, int, 0444);
89 MODULE_PARM_DESC(fx_raw
, "if non-zero, assume that the FX process needs help");
90 module_param(debug_default
, int, 0444);
91 MODULE_PARM_DESC(debug_default
, "debug parameters for card initialization");
92 module_param(wait_usecs
, int, 0444);
93 MODULE_PARM_DESC(wait_usecs
, "how long to wait without sleeping, usecs");
94 module_param(sleep_interval
, int, 0444);
95 MODULE_PARM_DESC(sleep_interval
, "how long to sleep when waiting for reply");
96 module_param(sleep_tries
, int, 0444);
97 MODULE_PARM_DESC(sleep_tries
, "how many times to try sleeping during a wait");
98 module_param(ospath
, charp
, 0444);
99 MODULE_PARM_DESC(ospath
, "pathname to processed ICS2115 OS firmware");
100 module_param(reset_time
, int, 0444);
101 MODULE_PARM_DESC(reset_time
, "how long to wait for a reset to take effect");
102 module_param(ramcheck_time
, int, 0444);
103 MODULE_PARM_DESC(ramcheck_time
, "how many seconds to wait for the RAM test");
104 module_param(osrun_time
, int, 0444);
105 MODULE_PARM_DESC(osrun_time
, "how many seconds to wait for the ICS2115 OS");
107 /* if WF_DEBUG not defined, no run-time debugging messages will
108 be available via the debug flag setting. Given the current
109 beta state of the driver, this will remain set until a future
117 #define DPRINT(cond, ...) \
118 if ((dev->debug & (cond)) == (cond)) { \
119 snd_printk (__VA_ARGS__); \
122 #define DPRINT(cond, args...)
123 #endif /* WF_DEBUG */
125 #define LOGNAME "WaveFront: "
127 /* bitmasks for WaveFront status port value */
129 #define STAT_RINTR_ENABLED 0x01
130 #define STAT_CAN_READ 0x02
131 #define STAT_INTR_READ 0x04
132 #define STAT_WINTR_ENABLED 0x10
133 #define STAT_CAN_WRITE 0x20
134 #define STAT_INTR_WRITE 0x40
136 static int wavefront_delete_sample (snd_wavefront_t
*, int sampnum
);
137 static int wavefront_find_free_sample (snd_wavefront_t
*);
139 struct wavefront_command
{
142 unsigned int read_cnt
;
143 unsigned int write_cnt
;
150 } wavefront_errors
[] = {
151 { 0x01, "Bad sample number" },
152 { 0x02, "Out of sample memory" },
153 { 0x03, "Bad patch number" },
154 { 0x04, "Error in number of voices" },
155 { 0x06, "Sample load already in progress" },
156 { 0x0B, "No sample load request pending" },
157 { 0x0E, "Bad MIDI channel number" },
158 { 0x10, "Download Record Error" },
165 static struct wavefront_command wavefront_commands
[] = {
166 { WFC_SET_SYNTHVOL
, "set synthesizer volume", 0, 1, NEEDS_ACK
},
167 { WFC_GET_SYNTHVOL
, "get synthesizer volume", 1, 0, 0},
168 { WFC_SET_NVOICES
, "set number of voices", 0, 1, NEEDS_ACK
},
169 { WFC_GET_NVOICES
, "get number of voices", 1, 0, 0 },
170 { WFC_SET_TUNING
, "set synthesizer tuning", 0, 2, NEEDS_ACK
},
171 { WFC_GET_TUNING
, "get synthesizer tuning", 2, 0, 0 },
172 { WFC_DISABLE_CHANNEL
, "disable synth channel", 0, 1, NEEDS_ACK
},
173 { WFC_ENABLE_CHANNEL
, "enable synth channel", 0, 1, NEEDS_ACK
},
174 { WFC_GET_CHANNEL_STATUS
, "get synth channel status", 3, 0, 0 },
175 { WFC_MISYNTH_OFF
, "disable midi-in to synth", 0, 0, NEEDS_ACK
},
176 { WFC_MISYNTH_ON
, "enable midi-in to synth", 0, 0, NEEDS_ACK
},
177 { WFC_VMIDI_ON
, "enable virtual midi mode", 0, 0, NEEDS_ACK
},
178 { WFC_VMIDI_OFF
, "disable virtual midi mode", 0, 0, NEEDS_ACK
},
179 { WFC_MIDI_STATUS
, "report midi status", 1, 0, 0 },
180 { WFC_FIRMWARE_VERSION
, "report firmware version", 2, 0, 0 },
181 { WFC_HARDWARE_VERSION
, "report hardware version", 2, 0, 0 },
182 { WFC_GET_NSAMPLES
, "report number of samples", 2, 0, 0 },
183 { WFC_INSTOUT_LEVELS
, "report instantaneous output levels", 7, 0, 0 },
184 { WFC_PEAKOUT_LEVELS
, "report peak output levels", 7, 0, 0 },
185 { WFC_DOWNLOAD_SAMPLE
, "download sample",
186 0, WF_SAMPLE_BYTES
, NEEDS_ACK
},
187 { WFC_DOWNLOAD_BLOCK
, "download block", 0, 0, NEEDS_ACK
},
188 { WFC_DOWNLOAD_SAMPLE_HEADER
, "download sample header",
189 0, WF_SAMPLE_HDR_BYTES
, NEEDS_ACK
},
190 { WFC_UPLOAD_SAMPLE_HEADER
, "upload sample header", 13, 2, 0 },
192 /* This command requires a variable number of bytes to be written.
193 There is a hack in snd_wavefront_cmd() to support this. The actual
194 count is passed in as the read buffer ptr, cast appropriately.
198 { WFC_DOWNLOAD_MULTISAMPLE
, "download multisample", 0, 0, NEEDS_ACK
},
200 /* This one is a hack as well. We just read the first byte of the
201 response, don't fetch an ACK, and leave the rest to the
202 calling function. Ugly, ugly, ugly.
205 { WFC_UPLOAD_MULTISAMPLE
, "upload multisample", 2, 1, 0 },
206 { WFC_DOWNLOAD_SAMPLE_ALIAS
, "download sample alias",
207 0, WF_ALIAS_BYTES
, NEEDS_ACK
},
208 { WFC_UPLOAD_SAMPLE_ALIAS
, "upload sample alias", WF_ALIAS_BYTES
, 2, 0},
209 { WFC_DELETE_SAMPLE
, "delete sample", 0, 2, NEEDS_ACK
},
210 { WFC_IDENTIFY_SAMPLE_TYPE
, "identify sample type", 5, 2, 0 },
211 { WFC_UPLOAD_SAMPLE_PARAMS
, "upload sample parameters" },
212 { WFC_REPORT_FREE_MEMORY
, "report free memory", 4, 0, 0 },
213 { WFC_DOWNLOAD_PATCH
, "download patch", 0, 134, NEEDS_ACK
},
214 { WFC_UPLOAD_PATCH
, "upload patch", 132, 2, 0 },
215 { WFC_DOWNLOAD_PROGRAM
, "download program", 0, 33, NEEDS_ACK
},
216 { WFC_UPLOAD_PROGRAM
, "upload program", 32, 1, 0 },
217 { WFC_DOWNLOAD_EDRUM_PROGRAM
, "download enhanced drum program", 0, 9,
219 { WFC_UPLOAD_EDRUM_PROGRAM
, "upload enhanced drum program", 8, 1, 0},
220 { WFC_SET_EDRUM_CHANNEL
, "set enhanced drum program channel",
222 { WFC_DISABLE_DRUM_PROGRAM
, "disable drum program", 0, 1, NEEDS_ACK
},
223 { WFC_REPORT_CHANNEL_PROGRAMS
, "report channel program numbers",
225 { WFC_NOOP
, "the no-op command", 0, 0, NEEDS_ACK
},
230 wavefront_errorstr (int errnum
)
235 for (i
= 0; wavefront_errors
[i
].errstr
; i
++) {
236 if (wavefront_errors
[i
].errno
== errnum
) {
237 return wavefront_errors
[i
].errstr
;
241 return "Unknown WaveFront error";
244 static struct wavefront_command
*
245 wavefront_get_command (int cmd
)
250 for (i
= 0; wavefront_commands
[i
].cmd
!= 0; i
++) {
251 if (cmd
== wavefront_commands
[i
].cmd
) {
252 return &wavefront_commands
[i
];
260 wavefront_status (snd_wavefront_t
*dev
)
263 return inb (dev
->status_port
);
267 wavefront_sleep (int limit
)
270 schedule_timeout_interruptible(limit
);
272 return signal_pending(current
);
276 wavefront_wait (snd_wavefront_t
*dev
, int mask
)
281 /* Spin for a short period of time, because >99% of all
282 requests to the WaveFront can be serviced inline like this.
285 for (i
= 0; i
< wait_usecs
; i
+= 5) {
286 if (wavefront_status (dev
) & mask
) {
292 for (i
= 0; i
< sleep_tries
; i
++) {
294 if (wavefront_status (dev
) & mask
) {
298 if (wavefront_sleep (HZ
/sleep_interval
)) {
307 wavefront_read (snd_wavefront_t
*dev
)
310 if (wavefront_wait (dev
, STAT_CAN_READ
))
311 return inb (dev
->data_port
);
313 DPRINT (WF_DEBUG_DATA
, "read timeout.\n");
319 wavefront_write (snd_wavefront_t
*dev
, unsigned char data
)
322 if (wavefront_wait (dev
, STAT_CAN_WRITE
)) {
323 outb (data
, dev
->data_port
);
327 DPRINT (WF_DEBUG_DATA
, "write timeout.\n");
333 snd_wavefront_cmd (snd_wavefront_t
*dev
,
334 int cmd
, unsigned char *rbuf
, unsigned char *wbuf
)
340 struct wavefront_command
*wfcmd
;
342 if ((wfcmd
= wavefront_get_command (cmd
)) == NULL
) {
343 snd_printk ("command 0x%x not supported.\n",
348 /* Hack to handle the one variable-size write command. See
349 wavefront_send_multisample() for the other half of this
350 gross and ugly strategy.
353 if (cmd
== WFC_DOWNLOAD_MULTISAMPLE
) {
354 wfcmd
->write_cnt
= (unsigned long) rbuf
;
358 DPRINT (WF_DEBUG_CMD
, "0x%x [%s] (%d,%d,%d)\n",
359 cmd
, wfcmd
->action
, wfcmd
->read_cnt
,
360 wfcmd
->write_cnt
, wfcmd
->need_ack
);
362 if (wavefront_write (dev
, cmd
)) {
363 DPRINT ((WF_DEBUG_IO
|WF_DEBUG_CMD
), "cannot request "
369 if (wfcmd
->write_cnt
> 0) {
370 DPRINT (WF_DEBUG_DATA
, "writing %d bytes "
372 wfcmd
->write_cnt
, cmd
);
374 for (i
= 0; i
< wfcmd
->write_cnt
; i
++) {
375 if (wavefront_write (dev
, wbuf
[i
])) {
376 DPRINT (WF_DEBUG_IO
, "bad write for byte "
377 "%d of 0x%x [%s].\n",
378 i
, cmd
, wfcmd
->action
);
382 DPRINT (WF_DEBUG_DATA
, "write[%d] = 0x%x\n",
387 if (wfcmd
->read_cnt
> 0) {
388 DPRINT (WF_DEBUG_DATA
, "reading %d ints "
390 wfcmd
->read_cnt
, cmd
);
392 for (i
= 0; i
< wfcmd
->read_cnt
; i
++) {
394 if ((c
= wavefront_read (dev
)) == -1) {
395 DPRINT (WF_DEBUG_IO
, "bad read for byte "
396 "%d of 0x%x [%s].\n",
397 i
, cmd
, wfcmd
->action
);
401 /* Now handle errors. Lots of special cases here */
404 if ((c
= wavefront_read (dev
)) == -1) {
405 DPRINT (WF_DEBUG_IO
, "bad read for "
414 /* Can you believe this madness ? */
417 wfcmd
->cmd
== WFC_IDENTIFY_SAMPLE_TYPE
) {
418 rbuf
[0] = WF_ST_EMPTY
;
422 wfcmd
->cmd
== WFC_UPLOAD_PATCH
) {
427 wfcmd
->cmd
== WFC_UPLOAD_PROGRAM
) {
433 DPRINT (WF_DEBUG_IO
, "error %d (%s) "
439 wavefront_errorstr (c
),
450 DPRINT (WF_DEBUG_DATA
, "read[%d] = 0x%x\n",i
, rbuf
[i
]);
454 if ((wfcmd
->read_cnt
== 0 && wfcmd
->write_cnt
== 0) || wfcmd
->need_ack
) {
456 DPRINT (WF_DEBUG_CMD
, "reading ACK for 0x%x\n", cmd
);
458 /* Some commands need an ACK, but return zero instead
459 of the standard value.
462 if ((ack
= wavefront_read (dev
)) == 0) {
468 DPRINT (WF_DEBUG_IO
, "cannot read ack for "
474 int err
= -1; /* something unknown */
476 if (ack
== 0xff) { /* explicit error */
478 if ((err
= wavefront_read (dev
)) == -1) {
479 DPRINT (WF_DEBUG_DATA
,
486 DPRINT (WF_DEBUG_IO
, "0x%x [%s] "
487 "failed (0x%x, 0x%x, %s)\n",
488 cmd
, wfcmd
->action
, ack
, err
,
489 wavefront_errorstr (err
));
495 DPRINT (WF_DEBUG_DATA
, "ack received "
500 DPRINT (WF_DEBUG_CMD
, "0x%x [%s] does not need "
502 cmd
, wfcmd
->action
, wfcmd
->read_cnt
,
503 wfcmd
->write_cnt
, wfcmd
->need_ack
);
510 /***********************************************************************
511 WaveFront data munging
513 Things here are weird. All data written to the board cannot
514 have its most significant bit set. Any data item with values
515 potentially > 0x7F (127) must be split across multiple bytes.
517 Sometimes, we need to munge numeric values that are represented on
518 the x86 side as 8-32 bit values. Sometimes, we need to munge data
519 that is represented on the x86 side as an array of bytes. The most
520 efficient approach to handling both cases seems to be to use 2
521 different functions for munging and 2 for de-munging. This avoids
522 weird casting and worrying about bit-level offsets.
524 **********************************************************************/
526 static unsigned char *
527 munge_int32 (unsigned int src
,
529 unsigned int dst_size
)
533 for (i
= 0; i
< dst_size
; i
++) {
534 *dst
= src
& 0x7F; /* Mask high bit of LSB */
535 src
= src
>> 7; /* Rotate Right 7 bits */
536 /* Note: we leave the upper bits in place */
544 demunge_int32 (unsigned char* src
, int src_size
)
550 for (i
= src_size
- 1; i
>= 0; i
--) {
551 outval
=(outval
<<7)+src
[i
];
559 munge_buf (unsigned char *src
, unsigned char *dst
, unsigned int dst_size
)
563 unsigned int last
= dst_size
/ 2;
565 for (i
= 0; i
< last
; i
++) {
566 *dst
++ = src
[i
] & 0x7f;
567 *dst
++ = src
[i
] >> 7;
574 demunge_buf (unsigned char *src
, unsigned char *dst
, unsigned int src_bytes
)
578 unsigned char *end
= src
+ src_bytes
;
580 end
= src
+ src_bytes
;
582 /* NOTE: src and dst *CAN* point to the same address */
584 for (i
= 0; src
!= end
; i
++) {
586 dst
[i
] |= (*src
++)<<7;
592 /***********************************************************************
593 WaveFront: sample, patch and program management.
594 ***********************************************************************/
597 wavefront_delete_sample (snd_wavefront_t
*dev
, int sample_num
)
600 unsigned char wbuf
[2];
603 wbuf
[0] = sample_num
& 0x7f;
604 wbuf
[1] = sample_num
>> 7;
606 if ((x
= snd_wavefront_cmd (dev
, WFC_DELETE_SAMPLE
, NULL
, wbuf
)) == 0) {
607 dev
->sample_status
[sample_num
] = WF_ST_EMPTY
;
614 wavefront_get_sample_status (snd_wavefront_t
*dev
, int assume_rom
)
618 unsigned char rbuf
[32], wbuf
[32];
619 unsigned int sc_real
, sc_alias
, sc_multi
;
621 /* check sample status */
623 if (snd_wavefront_cmd (dev
, WFC_GET_NSAMPLES
, rbuf
, wbuf
)) {
624 snd_printk ("cannot request sample count.\n");
628 sc_real
= sc_alias
= sc_multi
= dev
->samples_used
= 0;
630 for (i
= 0; i
< WF_MAX_SAMPLE
; i
++) {
635 if (snd_wavefront_cmd (dev
, WFC_IDENTIFY_SAMPLE_TYPE
, rbuf
, wbuf
)) {
636 snd_printk("cannot identify sample "
637 "type of slot %d\n", i
);
638 dev
->sample_status
[i
] = WF_ST_EMPTY
;
642 dev
->sample_status
[i
] = (WF_SLOT_FILLED
|rbuf
[0]);
645 dev
->sample_status
[i
] |= WF_SLOT_ROM
;
648 switch (rbuf
[0] & WF_ST_MASK
) {
652 case WF_ST_MULTISAMPLE
:
662 snd_printk ("unknown sample type for "
667 if (rbuf
[0] != WF_ST_EMPTY
) {
672 snd_printk ("%d samples used (%d real, %d aliases, %d multi), "
673 "%d empty\n", dev
->samples_used
, sc_real
, sc_alias
, sc_multi
,
674 WF_MAX_SAMPLE
- dev
->samples_used
);
682 wavefront_get_patch_status (snd_wavefront_t
*dev
)
685 unsigned char patchbuf
[WF_PATCH_BYTES
];
686 unsigned char patchnum
[2];
690 for (i
= 0; i
< WF_MAX_PATCH
; i
++) {
691 patchnum
[0] = i
& 0x7f;
692 patchnum
[1] = i
>> 7;
694 if ((x
= snd_wavefront_cmd (dev
, WFC_UPLOAD_PATCH
, patchbuf
,
697 dev
->patch_status
[i
] |= WF_SLOT_FILLED
;
698 p
= (wavefront_patch
*) patchbuf
;
700 [p
->sample_number
|(p
->sample_msb
<<7)] |=
703 } else if (x
== 3) { /* Bad patch number */
704 dev
->patch_status
[i
] = 0;
706 snd_printk ("upload patch "
708 dev
->patch_status
[i
] = 0;
713 /* program status has already filled in slot_used bits */
715 for (i
= 0, cnt
= 0, cnt2
= 0; i
< WF_MAX_PATCH
; i
++) {
716 if (dev
->patch_status
[i
] & WF_SLOT_FILLED
) {
719 if (dev
->patch_status
[i
] & WF_SLOT_USED
) {
724 snd_printk ("%d patch slots filled, %d in use\n", cnt
, cnt2
);
730 wavefront_get_program_status (snd_wavefront_t
*dev
)
733 unsigned char progbuf
[WF_PROGRAM_BYTES
];
734 wavefront_program prog
;
735 unsigned char prognum
;
738 for (i
= 0; i
< WF_MAX_PROGRAM
; i
++) {
741 if ((x
= snd_wavefront_cmd (dev
, WFC_UPLOAD_PROGRAM
, progbuf
,
744 dev
->prog_status
[i
] |= WF_SLOT_USED
;
746 demunge_buf (progbuf
, (unsigned char *) &prog
,
749 for (l
= 0; l
< WF_NUM_LAYERS
; l
++) {
750 if (prog
.layer
[l
].mute
) {
752 [prog
.layer
[l
].patch_number
] |=
756 } else if (x
== 1) { /* Bad program number */
757 dev
->prog_status
[i
] = 0;
759 snd_printk ("upload program "
761 dev
->prog_status
[i
] = 0;
765 for (i
= 0, cnt
= 0; i
< WF_MAX_PROGRAM
; i
++) {
766 if (dev
->prog_status
[i
]) {
771 snd_printk ("%d programs slots in use\n", cnt
);
777 wavefront_send_patch (snd_wavefront_t
*dev
, wavefront_patch_info
*header
)
780 unsigned char buf
[WF_PATCH_BYTES
+2];
783 DPRINT (WF_DEBUG_LOAD_PATCH
, "downloading patch %d\n",
786 dev
->patch_status
[header
->number
] |= WF_SLOT_FILLED
;
789 bptr
= munge_int32 (header
->number
, buf
, 2);
790 munge_buf ((unsigned char *)&header
->hdr
.p
, bptr
, WF_PATCH_BYTES
);
792 if (snd_wavefront_cmd (dev
, WFC_DOWNLOAD_PATCH
, NULL
, buf
)) {
793 snd_printk ("download patch failed\n");
801 wavefront_send_program (snd_wavefront_t
*dev
, wavefront_patch_info
*header
)
804 unsigned char buf
[WF_PROGRAM_BYTES
+1];
807 DPRINT (WF_DEBUG_LOAD_PATCH
, "downloading program %d\n",
810 dev
->prog_status
[header
->number
] = WF_SLOT_USED
;
812 /* XXX need to zero existing SLOT_USED bit for program_status[i]
813 where `i' is the program that's being (potentially) overwritten.
816 for (i
= 0; i
< WF_NUM_LAYERS
; i
++) {
817 if (header
->hdr
.pr
.layer
[i
].mute
) {
818 dev
->patch_status
[header
->hdr
.pr
.layer
[i
].patch_number
] |=
821 /* XXX need to mark SLOT_USED for sample used by
822 patch_number, but this means we have to load it. Ick.
827 buf
[0] = header
->number
;
828 munge_buf ((unsigned char *)&header
->hdr
.pr
, &buf
[1], WF_PROGRAM_BYTES
);
830 if (snd_wavefront_cmd (dev
, WFC_DOWNLOAD_PROGRAM
, NULL
, buf
)) {
831 snd_printk ("download patch failed\n");
839 wavefront_freemem (snd_wavefront_t
*dev
)
844 if (snd_wavefront_cmd (dev
, WFC_REPORT_FREE_MEMORY
, rbuf
, NULL
)) {
845 snd_printk ("can't get memory stats.\n");
848 return demunge_int32 (rbuf
, 4);
853 wavefront_send_sample (snd_wavefront_t
*dev
,
854 wavefront_patch_info
*header
,
856 int data_is_unsigned
)
859 /* samples are downloaded via a 16-bit wide i/o port
860 (you could think of it as 2 adjacent 8-bit wide ports
861 but its less efficient that way). therefore, all
862 the blocksizes and so forth listed in the documentation,
863 and used conventionally to refer to sample sizes,
864 which are given in 8-bit units (bytes), need to be
868 u16 sample_short
= 0;
870 u16 __user
*data_end
= NULL
;
872 const unsigned int max_blksize
= 4096/2;
873 unsigned int written
;
874 unsigned int blocksize
;
877 unsigned char sample_hdr
[WF_SAMPLE_HDR_BYTES
];
878 unsigned char *shptr
;
880 int initial_skip
= 0;
882 DPRINT (WF_DEBUG_LOAD_PATCH
, "sample %sdownload for slot %d, "
883 "type %d, %d bytes from 0x%lx\n",
884 header
->size
? "" : "header ",
885 header
->number
, header
->subkey
,
887 (unsigned long) header
->dataptr
);
889 if (header
->number
== WAVEFRONT_FIND_FREE_SAMPLE_SLOT
) {
892 if ((x
= wavefront_find_free_sample (dev
)) < 0) {
895 snd_printk ("unspecified sample => %d\n", x
);
901 /* XXX it's a debatable point whether or not RDONLY semantics
902 on the ROM samples should cover just the sample data or
903 the sample header. For now, it only covers the sample data,
904 so anyone is free at all times to rewrite sample headers.
906 My reason for this is that we have the sample headers
907 available in the WFB file for General MIDI, and so these
908 can always be reset if needed. The sample data, however,
909 cannot be recovered without a complete reset and firmware
910 reload of the ICS2115, which is a very expensive operation.
912 So, doing things this way allows us to honor the notion of
913 "RESETSAMPLES" reasonably cheaply. Note however, that this
914 is done purely at user level: there is no WFB parser in
915 this driver, and so a complete reset (back to General MIDI,
916 or theoretically some other configuration) is the
917 responsibility of the user level library.
919 To try to do this in the kernel would be a little
920 crazy: we'd need 158K of kernel space just to hold
921 a copy of the patch/program/sample header data.
924 if (dev
->rom_samples_rdonly
) {
925 if (dev
->sample_status
[header
->number
] & WF_SLOT_ROM
) {
926 snd_printk ("sample slot %d "
933 wavefront_delete_sample (dev
, header
->number
);
937 dev
->freemem
= wavefront_freemem (dev
);
939 if (dev
->freemem
< (int)header
->size
) {
940 snd_printk ("insufficient memory to "
941 "load %d byte sample.\n",
948 skip
= WF_GET_CHANNEL(&header
->hdr
.s
);
950 if (skip
> 0 && header
->hdr
.s
.SampleResolution
!= LINEAR_16BIT
) {
951 snd_printk ("channel selection only "
952 "possible on 16-bit samples");
987 DPRINT (WF_DEBUG_LOAD_PATCH
, "channel selection: %d => "
988 "initial skip = %d, skip = %d\n",
989 WF_GET_CHANNEL (&header
->hdr
.s
),
992 /* Be safe, and zero the "Unused" bits ... */
994 WF_SET_CHANNEL(&header
->hdr
.s
, 0);
996 /* adjust size for 16 bit samples by dividing by two. We always
997 send 16 bits per write, even for 8 bit samples, so the length
998 is always half the size of the sample data in bytes.
1001 length
= header
->size
/ 2;
1003 /* the data we're sent has not been munged, and in fact, the
1004 header we have to send isn't just a munged copy either.
1005 so, build the sample header right here.
1008 shptr
= &sample_hdr
[0];
1010 shptr
= munge_int32 (header
->number
, shptr
, 2);
1013 shptr
= munge_int32 (length
, shptr
, 4);
1016 /* Yes, a 4 byte result doesn't contain all of the offset bits,
1017 but the offset only uses 24 bits.
1020 shptr
= munge_int32 (*((u32
*) &header
->hdr
.s
.sampleStartOffset
),
1022 shptr
= munge_int32 (*((u32
*) &header
->hdr
.s
.loopStartOffset
),
1024 shptr
= munge_int32 (*((u32
*) &header
->hdr
.s
.loopEndOffset
),
1026 shptr
= munge_int32 (*((u32
*) &header
->hdr
.s
.sampleEndOffset
),
1029 /* This one is truly weird. What kind of weirdo decided that in
1030 a system dominated by 16 and 32 bit integers, they would use
1034 shptr
= munge_int32 (header
->hdr
.s
.FrequencyBias
, shptr
, 3);
1036 /* Why is this nybblified, when the MSB is *always* zero ?
1037 Anyway, we can't take address of bitfield, so make a
1038 good-faith guess at where it starts.
1041 shptr
= munge_int32 (*(&header
->hdr
.s
.FrequencyBias
+1),
1044 if (snd_wavefront_cmd (dev
,
1046 WFC_DOWNLOAD_SAMPLE
: WFC_DOWNLOAD_SAMPLE_HEADER
,
1047 NULL
, sample_hdr
)) {
1048 snd_printk ("sample %sdownload refused.\n",
1049 header
->size
? "" : "header ");
1053 if (header
->size
== 0) {
1054 goto sent
; /* Sorry. Just had to have one somewhere */
1057 data_end
= dataptr
+ length
;
1059 /* Do any initial skip over an unused channel's data */
1061 dataptr
+= initial_skip
;
1063 for (written
= 0, blocknum
= 0;
1064 written
< length
; written
+= max_blksize
, blocknum
++) {
1066 if ((length
- written
) > max_blksize
) {
1067 blocksize
= max_blksize
;
1069 /* round to nearest 16-byte value */
1070 blocksize
= ALIGN(length
- written
, 8);
1073 if (snd_wavefront_cmd (dev
, WFC_DOWNLOAD_BLOCK
, NULL
, NULL
)) {
1074 snd_printk ("download block "
1075 "request refused.\n");
1079 for (i
= 0; i
< blocksize
; i
++) {
1081 if (dataptr
< data_end
) {
1083 __get_user (sample_short
, dataptr
);
1086 if (data_is_unsigned
) { /* GUS ? */
1088 if (WF_SAMPLE_IS_8BIT(&header
->hdr
.s
)) {
1096 &sample_short
)[0] += 0x7f;
1098 &sample_short
)[1] += 0x7f;
1107 sample_short
+= 0x7fff;
1113 /* In padding section of final block:
1115 Don't fetch unsupplied data from
1116 user space, just continue with
1117 whatever the final value was.
1121 if (i
< blocksize
- 1) {
1122 outw (sample_short
, dev
->block_port
);
1124 outw (sample_short
, dev
->last_block_port
);
1128 /* Get "DMA page acknowledge", even though its really
1129 nothing to do with DMA at all.
1132 if ((dma_ack
= wavefront_read (dev
)) != WF_DMA_ACK
) {
1133 if (dma_ack
== -1) {
1134 snd_printk ("upload sample "
1135 "DMA ack timeout\n");
1138 snd_printk ("upload sample "
1139 "DMA ack error 0x%x\n",
1146 dev
->sample_status
[header
->number
] = (WF_SLOT_FILLED
|WF_ST_SAMPLE
);
1148 /* Note, label is here because sending the sample header shouldn't
1149 alter the sample_status info at all.
1157 wavefront_send_alias (snd_wavefront_t
*dev
, wavefront_patch_info
*header
)
1160 unsigned char alias_hdr
[WF_ALIAS_BYTES
];
1162 DPRINT (WF_DEBUG_LOAD_PATCH
, "download alias, %d is "
1165 header
->hdr
.a
.OriginalSample
);
1167 munge_int32 (header
->number
, &alias_hdr
[0], 2);
1168 munge_int32 (header
->hdr
.a
.OriginalSample
, &alias_hdr
[2], 2);
1169 munge_int32 (*((unsigned int *)&header
->hdr
.a
.sampleStartOffset
),
1171 munge_int32 (*((unsigned int *)&header
->hdr
.a
.loopStartOffset
),
1173 munge_int32 (*((unsigned int *)&header
->hdr
.a
.loopEndOffset
),
1175 munge_int32 (*((unsigned int *)&header
->hdr
.a
.sampleEndOffset
),
1177 munge_int32 (header
->hdr
.a
.FrequencyBias
, &alias_hdr
[20], 3);
1178 munge_int32 (*(&header
->hdr
.a
.FrequencyBias
+1), &alias_hdr
[23], 2);
1180 if (snd_wavefront_cmd (dev
, WFC_DOWNLOAD_SAMPLE_ALIAS
, NULL
, alias_hdr
)) {
1181 snd_printk ("download alias failed.\n");
1185 dev
->sample_status
[header
->number
] = (WF_SLOT_FILLED
|WF_ST_ALIAS
);
1191 wavefront_send_multisample (snd_wavefront_t
*dev
, wavefront_patch_info
*header
)
1195 unsigned char *msample_hdr
;
1197 msample_hdr
= kmalloc(sizeof(WF_MSAMPLE_BYTES
), GFP_KERNEL
);
1201 munge_int32 (header
->number
, &msample_hdr
[0], 2);
1203 /* You'll recall at this point that the "number of samples" value
1204 in a wavefront_multisample struct is actually the log2 of the
1205 real number of samples.
1208 num_samples
= (1<<(header
->hdr
.ms
.NumberOfSamples
&7));
1209 msample_hdr
[2] = (unsigned char) header
->hdr
.ms
.NumberOfSamples
;
1211 DPRINT (WF_DEBUG_LOAD_PATCH
, "multi %d with %d=%d samples\n",
1213 header
->hdr
.ms
.NumberOfSamples
,
1216 for (i
= 0; i
< num_samples
; i
++) {
1217 DPRINT(WF_DEBUG_LOAD_PATCH
|WF_DEBUG_DATA
, "sample[%d] = %d\n",
1218 i
, header
->hdr
.ms
.SampleNumber
[i
]);
1219 munge_int32 (header
->hdr
.ms
.SampleNumber
[i
],
1220 &msample_hdr
[3+(i
*2)], 2);
1223 /* Need a hack here to pass in the number of bytes
1224 to be written to the synth. This is ugly, and perhaps
1225 one day, I'll fix it.
1228 if (snd_wavefront_cmd (dev
, WFC_DOWNLOAD_MULTISAMPLE
,
1229 (unsigned char *) (long) ((num_samples
*2)+3),
1231 snd_printk ("download of multisample failed.\n");
1236 dev
->sample_status
[header
->number
] = (WF_SLOT_FILLED
|WF_ST_MULTISAMPLE
);
1243 wavefront_fetch_multisample (snd_wavefront_t
*dev
,
1244 wavefront_patch_info
*header
)
1247 unsigned char log_ns
[1];
1248 unsigned char number
[2];
1251 munge_int32 (header
->number
, number
, 2);
1253 if (snd_wavefront_cmd (dev
, WFC_UPLOAD_MULTISAMPLE
, log_ns
, number
)) {
1254 snd_printk ("upload multisample failed.\n");
1258 DPRINT (WF_DEBUG_DATA
, "msample %d has %d samples\n",
1259 header
->number
, log_ns
[0]);
1261 header
->hdr
.ms
.NumberOfSamples
= log_ns
[0];
1263 /* get the number of samples ... */
1265 num_samples
= (1 << log_ns
[0]);
1267 for (i
= 0; i
< num_samples
; i
++) {
1271 if ((val
= wavefront_read (dev
)) == -1) {
1272 snd_printk ("upload multisample failed "
1273 "during sample loop.\n");
1278 if ((val
= wavefront_read (dev
)) == -1) {
1279 snd_printk ("upload multisample failed "
1280 "during sample loop.\n");
1285 header
->hdr
.ms
.SampleNumber
[i
] =
1286 demunge_int32 ((unsigned char *) d
, 2);
1288 DPRINT (WF_DEBUG_DATA
, "msample sample[%d] = %d\n",
1289 i
, header
->hdr
.ms
.SampleNumber
[i
]);
1297 wavefront_send_drum (snd_wavefront_t
*dev
, wavefront_patch_info
*header
)
1300 unsigned char drumbuf
[WF_DRUM_BYTES
];
1301 wavefront_drum
*drum
= &header
->hdr
.d
;
1304 DPRINT (WF_DEBUG_LOAD_PATCH
, "downloading edrum for MIDI "
1305 "note %d, patch = %d\n",
1306 header
->number
, drum
->PatchNumber
);
1308 drumbuf
[0] = header
->number
& 0x7f;
1310 for (i
= 0; i
< 4; i
++) {
1311 munge_int32 (((unsigned char *)drum
)[i
], &drumbuf
[1+(i
*2)], 2);
1314 if (snd_wavefront_cmd (dev
, WFC_DOWNLOAD_EDRUM_PROGRAM
, NULL
, drumbuf
)) {
1315 snd_printk ("download drum failed.\n");
1323 wavefront_find_free_sample (snd_wavefront_t
*dev
)
1328 for (i
= 0; i
< WF_MAX_SAMPLE
; i
++) {
1329 if (!(dev
->sample_status
[i
] & WF_SLOT_FILLED
)) {
1333 snd_printk ("no free sample slots!\n");
1339 wavefront_find_free_patch (snd_wavefront_t
*dev
)
1344 for (i
= 0; i
< WF_MAX_PATCH
; i
++) {
1345 if (!(dev
->patch_status
[i
] & WF_SLOT_FILLED
)) {
1349 snd_printk ("no free patch slots!\n");
1355 wavefront_load_patch (snd_wavefront_t
*dev
, const char __user
*addr
)
1357 wavefront_patch_info
*header
;
1360 header
= kmalloc(sizeof(*header
), GFP_KERNEL
);
1364 if (copy_from_user (header
, addr
, sizeof(wavefront_patch_info
) -
1365 sizeof(wavefront_any
))) {
1366 snd_printk ("bad address for load patch.\n");
1371 DPRINT (WF_DEBUG_LOAD_PATCH
, "download "
1373 "Sample number: %d "
1374 "Sample size: %d\n",
1379 switch (header
->subkey
) {
1380 case WF_ST_SAMPLE
: /* sample or sample_header, based on patch->size */
1382 if (copy_from_user (&header
->hdr
.s
, header
->hdrptr
,
1383 sizeof (wavefront_sample
))) {
1388 err
= wavefront_send_sample (dev
, header
, header
->dataptr
, 0);
1391 case WF_ST_MULTISAMPLE
:
1393 if (copy_from_user (&header
->hdr
.s
, header
->hdrptr
,
1394 sizeof (wavefront_multisample
))) {
1399 err
= wavefront_send_multisample (dev
, header
);
1404 if (copy_from_user (&header
->hdr
.a
, header
->hdrptr
,
1405 sizeof (wavefront_alias
))) {
1410 err
= wavefront_send_alias (dev
, header
);
1414 if (copy_from_user (&header
->hdr
.d
, header
->hdrptr
,
1415 sizeof (wavefront_drum
))) {
1420 err
= wavefront_send_drum (dev
, header
);
1424 if (copy_from_user (&header
->hdr
.p
, header
->hdrptr
,
1425 sizeof (wavefront_patch
))) {
1430 err
= wavefront_send_patch (dev
, header
);
1434 if (copy_from_user (&header
->hdr
.pr
, header
->hdrptr
,
1435 sizeof (wavefront_program
))) {
1440 err
= wavefront_send_program (dev
, header
);
1444 snd_printk ("unknown patch type %d.\n",
1455 /***********************************************************************
1456 WaveFront: hardware-dependent interface
1457 ***********************************************************************/
1460 process_sample_hdr (u8
*buf
)
1468 /* The board doesn't send us an exact copy of a "wavefront_sample"
1469 in response to an Upload Sample Header command. Instead, we
1470 have to convert the data format back into our data structure,
1471 just as in the Download Sample command, where we have to do
1472 something very similar in the reverse direction.
1475 *((u32
*) &s
.sampleStartOffset
) = demunge_int32 (ptr
, 4); ptr
+= 4;
1476 *((u32
*) &s
.loopStartOffset
) = demunge_int32 (ptr
, 4); ptr
+= 4;
1477 *((u32
*) &s
.loopEndOffset
) = demunge_int32 (ptr
, 4); ptr
+= 4;
1478 *((u32
*) &s
.sampleEndOffset
) = demunge_int32 (ptr
, 4); ptr
+= 4;
1479 *((u32
*) &s
.FrequencyBias
) = demunge_int32 (ptr
, 3); ptr
+= 3;
1481 s
.SampleResolution
= *ptr
& 0x3;
1482 s
.Loop
= *ptr
& 0x8;
1483 s
.Bidirectional
= *ptr
& 0x10;
1484 s
.Reverse
= *ptr
& 0x40;
1486 /* Now copy it back to where it came from */
1488 memcpy (buf
, (unsigned char *) &s
, sizeof (wavefront_sample
));
1492 wavefront_synth_control (snd_wavefront_card_t
*acard
,
1493 wavefront_control
*wc
)
1496 snd_wavefront_t
*dev
= &acard
->wavefront
;
1497 unsigned char patchnumbuf
[2];
1500 DPRINT (WF_DEBUG_CMD
, "synth control with "
1501 "cmd 0x%x\n", wc
->cmd
);
1503 /* Pre-handling of or for various commands */
1507 case WFC_DISABLE_INTERRUPTS
:
1508 snd_printk ("interrupts disabled.\n");
1509 outb (0x80|0x20, dev
->control_port
);
1510 dev
->interrupts_are_midi
= 1;
1513 case WFC_ENABLE_INTERRUPTS
:
1514 snd_printk ("interrupts enabled.\n");
1515 outb (0x80|0x40|0x20, dev
->control_port
);
1516 dev
->interrupts_are_midi
= 1;
1519 case WFC_INTERRUPT_STATUS
:
1520 wc
->rbuf
[0] = dev
->interrupts_are_midi
;
1523 case WFC_ROMSAMPLES_RDONLY
:
1524 dev
->rom_samples_rdonly
= wc
->wbuf
[0];
1528 case WFC_IDENTIFY_SLOT_TYPE
:
1529 i
= wc
->wbuf
[0] | (wc
->wbuf
[1] << 7);
1530 if (i
<0 || i
>= WF_MAX_SAMPLE
) {
1531 snd_printk ("invalid slot ID %d\n",
1533 wc
->status
= EINVAL
;
1536 wc
->rbuf
[0] = dev
->sample_status
[i
];
1540 case WFC_DEBUG_DRIVER
:
1541 dev
->debug
= wc
->wbuf
[0];
1542 snd_printk ("debug = 0x%x\n", dev
->debug
);
1545 case WFC_UPLOAD_PATCH
:
1546 munge_int32 (*((u32
*) wc
->wbuf
), patchnumbuf
, 2);
1547 memcpy (wc
->wbuf
, patchnumbuf
, 2);
1550 case WFC_UPLOAD_MULTISAMPLE
:
1551 /* multisamples have to be handled differently, and
1552 cannot be dealt with properly by snd_wavefront_cmd() alone.
1554 wc
->status
= wavefront_fetch_multisample
1555 (dev
, (wavefront_patch_info
*) wc
->rbuf
);
1558 case WFC_UPLOAD_SAMPLE_ALIAS
:
1559 snd_printk ("support for sample alias upload "
1560 "being considered.\n");
1561 wc
->status
= EINVAL
;
1565 wc
->status
= snd_wavefront_cmd (dev
, wc
->cmd
, wc
->rbuf
, wc
->wbuf
);
1567 /* Post-handling of certain commands.
1569 In particular, if the command was an upload, demunge the data
1570 so that the user-level doesn't have to think about it.
1573 if (wc
->status
== 0) {
1575 /* intercept any freemem requests so that we know
1576 we are always current with the user-level view
1580 case WFC_REPORT_FREE_MEMORY
:
1581 dev
->freemem
= demunge_int32 (wc
->rbuf
, 4);
1584 case WFC_UPLOAD_PATCH
:
1585 demunge_buf (wc
->rbuf
, wc
->rbuf
, WF_PATCH_BYTES
);
1588 case WFC_UPLOAD_PROGRAM
:
1589 demunge_buf (wc
->rbuf
, wc
->rbuf
, WF_PROGRAM_BYTES
);
1592 case WFC_UPLOAD_EDRUM_PROGRAM
:
1593 demunge_buf (wc
->rbuf
, wc
->rbuf
, WF_DRUM_BYTES
- 1);
1596 case WFC_UPLOAD_SAMPLE_HEADER
:
1597 process_sample_hdr (wc
->rbuf
);
1600 case WFC_UPLOAD_SAMPLE_ALIAS
:
1601 snd_printk ("support for "
1602 "sample aliases still "
1603 "being considered.\n");
1607 snd_wavefront_midi_disable_virtual (acard
);
1611 snd_wavefront_midi_enable_virtual (acard
);
1620 snd_wavefront_synth_open (struct snd_hwdep
*hw
, struct file
*file
)
1623 if (!try_module_get(hw
->card
->module
))
1625 file
->private_data
= hw
;
1630 snd_wavefront_synth_release (struct snd_hwdep
*hw
, struct file
*file
)
1633 module_put(hw
->card
->module
);
1638 snd_wavefront_synth_ioctl (struct snd_hwdep
*hw
, struct file
*file
,
1639 unsigned int cmd
, unsigned long arg
)
1642 struct snd_card
*card
;
1643 snd_wavefront_t
*dev
;
1644 snd_wavefront_card_t
*acard
;
1645 wavefront_control
*wc
;
1646 void __user
*argp
= (void __user
*)arg
;
1649 card
= (struct snd_card
*) hw
->card
;
1651 snd_assert(card
!= NULL
, return -ENODEV
);
1653 snd_assert(card
->private_data
!= NULL
, return -ENODEV
);
1655 acard
= card
->private_data
;
1656 dev
= &acard
->wavefront
;
1659 case WFCTL_LOAD_SPP
:
1660 if (wavefront_load_patch (dev
, argp
) != 0) {
1666 wc
= kmalloc(sizeof(*wc
), GFP_KERNEL
);
1669 if (copy_from_user (wc
, argp
, sizeof (*wc
)))
1671 else if (wavefront_synth_control (acard
, wc
) < 0)
1673 else if (copy_to_user (argp
, wc
, sizeof (*wc
)))
1688 /***********************************************************************/
1689 /* WaveFront: interface for card-level wavefront module */
1690 /***********************************************************************/
1693 snd_wavefront_internal_interrupt (snd_wavefront_card_t
*card
)
1695 snd_wavefront_t
*dev
= &card
->wavefront
;
1698 Some comments on interrupts. I attempted a version of this
1699 driver that used interrupts throughout the code instead of
1700 doing busy and/or sleep-waiting. Alas, it appears that once
1701 the Motorola firmware is downloaded, the card *never*
1702 generates an RX interrupt. These are successfully generated
1703 during firmware loading, and after that wavefront_status()
1704 reports that an interrupt is pending on the card from time
1705 to time, but it never seems to be delivered to this
1706 driver. Note also that wavefront_status() continues to
1707 report that RX interrupts are enabled, suggesting that I
1708 didn't goof up and disable them by mistake.
1710 Thus, I stepped back to a prior version of
1711 wavefront_wait(), the only place where this really
1712 matters. Its sad, but I've looked through the code to check
1713 on things, and I really feel certain that the Motorola
1714 firmware prevents RX-ready interrupts.
1717 if ((wavefront_status(dev
) & (STAT_INTR_READ
|STAT_INTR_WRITE
)) == 0) {
1721 spin_lock(&dev
->irq_lock
);
1724 spin_unlock(&dev
->irq_lock
);
1725 wake_up(&dev
->interrupt_sleeper
);
1730 0 Host Rx Interrupt Enable (1=Enabled)
1731 1 Host Rx Register Full (1=Full)
1732 2 Host Rx Interrupt Pending (1=Interrupt)
1734 4 Host Tx Interrupt (1=Enabled)
1735 5 Host Tx Register empty (1=Empty)
1736 6 Host Tx Interrupt Pending (1=Interrupt)
1740 static int __devinit
1741 snd_wavefront_interrupt_bits (int irq
)
1761 snd_printk ("invalid IRQ %d\n", irq
);
1768 static void __devinit
1769 wavefront_should_cause_interrupt (snd_wavefront_t
*dev
,
1770 int val
, int port
, unsigned long timeout
)
1775 init_waitqueue_entry(&wait
, current
);
1776 spin_lock_irq(&dev
->irq_lock
);
1777 add_wait_queue(&dev
->interrupt_sleeper
, &wait
);
1780 spin_unlock_irq(&dev
->irq_lock
);
1781 while (!dev
->irq_ok
&& time_before(jiffies
, timeout
)) {
1782 schedule_timeout_uninterruptible(1);
1787 static int __devinit
1788 wavefront_reset_to_cleanliness (snd_wavefront_t
*dev
)
1794 /* IRQ already checked */
1796 bits
= snd_wavefront_interrupt_bits (dev
->irq
);
1798 /* try reset of port */
1800 outb (0x0, dev
->control_port
);
1802 /* At this point, the board is in reset, and the H/W initialization
1803 register is accessed at the same address as the data port.
1805 Bit 7 - Enable IRQ Driver
1806 0 - Tri-state the Wave-Board drivers for the PC Bus IRQs
1807 1 - Enable IRQ selected by bits 5:3 to be driven onto the PC Bus.
1809 Bit 6 - MIDI Interface Select
1811 0 - Use the MIDI Input from the 26-pin WaveBlaster
1812 compatible header as the serial MIDI source
1813 1 - Use the MIDI Input from the 9-pin D connector as the
1816 Bits 5:3 - IRQ Selection
1827 Bit 0 - Disable Boot ROM
1828 0 - memory accesses to 03FC30-03FFFFH utilize the internal Boot ROM
1829 1 - memory accesses to 03FC30-03FFFFH are directed to external
1834 /* configure hardware: IRQ, enable interrupts,
1835 plus external 9-pin MIDI interface selected
1838 outb (0x80 | 0x40 | bits
, dev
->data_port
);
1842 0 Host Rx Interrupt Enable (1=Enabled) 0x1
1846 4 Host Tx Interrupt Enable 0x10
1847 5 Mute (0=Mute; 1=Play) 0x20
1848 6 Master Interrupt Enable (1=Enabled) 0x40
1849 7 Master Reset (0=Reset; 1=Run) 0x80
1851 Take us out of reset, mute output, master + TX + RX interrupts on.
1853 We'll get an interrupt presumably to tell us that the TX
1857 wavefront_should_cause_interrupt(dev
, 0x80|0x40|0x10|0x1,
1859 (reset_time
*HZ
)/100);
1861 /* Note: data port is now the data port, not the h/w initialization
1866 snd_printk ("intr not received after h/w un-reset.\n");
1870 /* Note: data port is now the data port, not the h/w initialization
1873 At this point, only "HW VERSION" or "DOWNLOAD OS" commands
1874 will work. So, issue one of them, and wait for TX
1875 interrupt. This can take a *long* time after a cold boot,
1876 while the ISC ROM does its RAM test. The SDK says up to 4
1877 seconds - with 12MB of RAM on a Tropez+, it takes a lot
1878 longer than that (~16secs). Note that the card understands
1879 the difference between a warm and a cold boot, so
1880 subsequent ISC2115 reboots (say, caused by module
1881 reloading) will get through this much faster.
1883 XXX Interesting question: why is no RX interrupt received first ?
1886 wavefront_should_cause_interrupt(dev
, WFC_HARDWARE_VERSION
,
1887 dev
->data_port
, ramcheck_time
*HZ
);
1890 snd_printk ("post-RAM-check interrupt not received.\n");
1894 if (!wavefront_wait (dev
, STAT_CAN_READ
)) {
1895 snd_printk ("no response to HW version cmd.\n");
1899 if ((hwv
[0] = wavefront_read (dev
)) == -1) {
1900 snd_printk ("board not responding correctly.\n");
1904 if (hwv
[0] == 0xFF) { /* NAK */
1906 /* Board's RAM test failed. Try to read error code,
1907 and tell us about it either way.
1910 if ((hwv
[0] = wavefront_read (dev
)) == -1) {
1911 snd_printk ("on-board RAM test failed "
1912 "(bad error code).\n");
1914 snd_printk ("on-board RAM test failed "
1915 "(error code: 0x%x).\n",
1921 /* We're OK, just get the next byte of the HW version response */
1923 if ((hwv
[1] = wavefront_read (dev
)) == -1) {
1924 snd_printk ("incorrect h/w response.\n");
1928 snd_printk ("hardware version %d.%d\n",
1938 static int __devinit
1939 wavefront_download_firmware (snd_wavefront_t
*dev
, char *path
)
1944 int section_cnt_downloaded
= 0;
1945 const struct firmware
*firmware
;
1947 err
= request_firmware(&firmware
, path
, dev
->card
->dev
);
1949 snd_printk(KERN_ERR
"firmware (%s) download failed!!!\n", path
);
1954 buf
= firmware
->data
;
1956 int section_length
= *(signed char *)buf
;
1957 if (section_length
== 0)
1959 if (section_length
< 0 || section_length
> WF_SECTION_MAX
) {
1961 "invalid firmware section length %d\n",
1968 if (firmware
->size
< len
+ section_length
) {
1969 snd_printk(KERN_ERR
"firmware section read error.\n");
1974 if (wavefront_write(dev
, WFC_DOWNLOAD_OS
))
1977 for (; section_length
; section_length
--) {
1978 if (wavefront_write(dev
, *buf
))
1985 if (!wavefront_wait(dev
, STAT_CAN_READ
)) {
1986 snd_printk(KERN_ERR
"time out for firmware ACK.\n");
1989 err
= inb(dev
->data_port
);
1990 if (err
!= WF_ACK
) {
1992 "download of section #%d not "
1993 "acknowledged, ack = 0x%x\n",
1994 section_cnt_downloaded
+ 1, err
);
1998 section_cnt_downloaded
++;
2001 release_firmware(firmware
);
2005 release_firmware(firmware
);
2006 snd_printk(KERN_ERR
"firmware download failed!!!\n");
2011 static int __devinit
2012 wavefront_do_reset (snd_wavefront_t
*dev
)
2017 if (wavefront_reset_to_cleanliness (dev
)) {
2018 snd_printk ("hw reset failed.\n");
2023 if (wavefront_download_firmware (dev
, ospath
)) {
2029 /* Wait for the OS to get running. The protocol for
2030 this is non-obvious, and was determined by
2031 using port-IO tracing in DOSemu and some
2032 experimentation here.
2034 Rather than using timed waits, use interrupts creatively.
2037 wavefront_should_cause_interrupt (dev
, WFC_NOOP
,
2042 snd_printk ("no post-OS interrupt.\n");
2046 /* Now, do it again ! */
2048 wavefront_should_cause_interrupt (dev
, WFC_NOOP
,
2049 dev
->data_port
, (10*HZ
));
2052 snd_printk ("no post-OS interrupt(2).\n");
2056 /* OK, no (RX/TX) interrupts any more, but leave mute
2060 outb (0x80|0x40, dev
->control_port
);
2063 /* SETUPSND.EXE asks for sample memory config here, but since i
2064 have no idea how to interpret the result, we'll forget
2068 if ((dev
->freemem
= wavefront_freemem (dev
)) < 0) {
2072 snd_printk ("available DRAM %dk\n", dev
->freemem
/ 1024);
2074 if (wavefront_write (dev
, 0xf0) ||
2075 wavefront_write (dev
, 1) ||
2076 (wavefront_read (dev
) < 0)) {
2078 snd_printk ("MPU emulation mode not set.\n");
2084 if (snd_wavefront_cmd (dev
, WFC_SET_NVOICES
, NULL
, voices
)) {
2085 snd_printk ("cannot set number of voices to 32.\n");
2093 /* reset that sucker so that it doesn't bother us. */
2095 outb (0x0, dev
->control_port
);
2096 dev
->interrupts_are_midi
= 0;
2101 snd_wavefront_start (snd_wavefront_t
*dev
)
2104 int samples_are_from_rom
;
2106 /* IMPORTANT: assumes that snd_wavefront_detect() and/or
2107 wavefront_reset_to_cleanliness() has already been called
2111 samples_are_from_rom
= 1;
2113 /* XXX is this always true ? */
2114 samples_are_from_rom
= 0;
2117 if (dev
->israw
|| fx_raw
) {
2118 if (wavefront_do_reset (dev
)) {
2122 /* Check for FX device, present only on Tropez+ */
2124 dev
->has_fx
= (snd_wavefront_fx_detect (dev
) == 0);
2126 if (dev
->has_fx
&& fx_raw
) {
2127 snd_wavefront_fx_start (dev
);
2130 wavefront_get_sample_status (dev
, samples_are_from_rom
);
2131 wavefront_get_program_status (dev
);
2132 wavefront_get_patch_status (dev
);
2134 /* Start normal operation: unreset, master interrupt enabled, no mute
2137 outb (0x80|0x40|0x20, dev
->control_port
);
2143 snd_wavefront_detect (snd_wavefront_card_t
*card
)
2146 unsigned char rbuf
[4], wbuf
[4];
2147 snd_wavefront_t
*dev
= &card
->wavefront
;
2149 /* returns zero if a WaveFront card is successfully detected.
2155 dev
->debug
= debug_default
;
2156 dev
->interrupts_are_midi
= 0;
2158 dev
->rom_samples_rdonly
= 1;
2160 if (snd_wavefront_cmd (dev
, WFC_FIRMWARE_VERSION
, rbuf
, wbuf
) == 0) {
2162 dev
->fw_version
[0] = rbuf
[0];
2163 dev
->fw_version
[1] = rbuf
[1];
2165 snd_printk ("firmware %d.%d already loaded.\n",
2168 /* check that a command actually works */
2170 if (snd_wavefront_cmd (dev
, WFC_HARDWARE_VERSION
,
2172 dev
->hw_version
[0] = rbuf
[0];
2173 dev
->hw_version
[1] = rbuf
[1];
2175 snd_printk ("not raw, but no "
2176 "hardware version!\n");
2183 snd_printk ("reloading firmware as you requested.\n");
2190 snd_printk ("no response to firmware probe, assume raw.\n");
2197 MODULE_FIRMWARE(DEFAULT_OSPATH
);