drivers/net/mac89x0.c

   1 /* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
   2 /*
   3         Written 1996 by Russell Nelson, with reference to skeleton.c
   4         written 1993-1994 by Donald Becker.
   5
   6         This software may be used and distributed according to the terms
   7         of the GNU General Public License, incorporated herein by reference.
   8
   9         The author may be reached at nelson@crynwr.com, Crynwr
  10         Software, 11 Grant St., Potsdam, NY 13676
  11
  12   Changelog:
  13
  14   Mike Cruse        : mcruse@cti-ltd.com
  15                     : Changes for Linux 2.0 compatibility.
  16                     : Added dev_id parameter in net_interrupt(),
  17                     : request_irq() and free_irq(). Just NULL for now.
  18
  19   Mike Cruse        : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
  20                     : in net_open() and net_close() so kerneld would know
  21                     : that the module is in use and wouldn't eject the
  22                     : driver prematurely.
  23
  24   Mike Cruse        : Rewrote init_module() and cleanup_module using 8390.c
  25                     : as an example. Disabled autoprobing in init_module(),
  26                     : not a good thing to do to other devices while Linux
  27                     : is running from all accounts.
  28
  29   Alan Cox          : Removed 1.2 support, added 2.1 extra counters.
  30
  31   David Huggins-Daines <dhd@debian.org>
  32
  33   Split this off into mac89x0.c, and gutted it of all parts which are
  34   not relevant to the existing CS8900 cards on the Macintosh
  35   (i.e. basically the Daynaport CS and LC cards).  To be precise:
  36
  37     * Removed all the media-detection stuff, because these cards are
  38     TP-only.
  39
  40     * Lobotomized the ISA interrupt bogosity, because these cards use
  41     a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
  42
  43     * Basically eliminated everything not relevant to getting the
  44     cards minimally functioning on the Macintosh.
  45
  46   I might add that these cards are badly designed even from the Mac
  47   standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
  48   I/O space and NuBus interrupts for these cards, but neglected to
  49   provide anything even remotely resembling a NuBus ROM.  Therefore we
  50   have to probe for them in a brain-damaged ISA-like fashion.
  51
  52   Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
  53   check kmalloc and release the allocated memory on failure in
  54   mac89x0_probe and in init_module
  55   use local_irq_{save,restore}(flags) in net_get_stat, not just
  56   local_irq_{dis,en}able()
  57 */
  58
  59 static char *version =
  60 "cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
  61
  62 /* ======================= configure the driver here ======================= */
  63
  64 /* use 0 for production, 1 for verification, >2 for debug */
  65 #ifndef NET_DEBUG
  66 #define NET_DEBUG 0
  67 #endif
  68
  69 /* ======================= end of configuration ======================= */
  70
  71
  72 /* Always include 'config.h' first in case the user wants to turn on
  73    or override something. */
  74 #include <linux/module.h>
  75
  76 #define PRINTK(x) printk x
  77
  78 /*
  79   Sources:
  80
  81         Crynwr packet driver epktisa.
  82
  83         Crystal Semiconductor data sheets.
  84
  85 */
  86
  87 #include <linux/kernel.h>
  88 #include <linux/types.h>
  89 #include <linux/fcntl.h>
  90 #include <linux/interrupt.h>
  91 #include <linux/ioport.h>
  92 #include <linux/in.h>
  93 #include <linux/slab.h>
  94 #include <linux/string.h>
  95 #include <linux/nubus.h>
  96 #include <linux/errno.h>
  97 #include <linux/init.h>
  98 #include <linux/netdevice.h>
  99 #include <linux/etherdevice.h>
 100 #include <linux/skbuff.h>
 101 #include <linux/delay.h>
 102
 103 #include <asm/system.h>
 104 #include <asm/bitops.h>
 105 #include <asm/io.h>
 106 #include <asm/hwtest.h>
 107 #include <asm/macints.h>
 108
 109 #include "cs89x0.h"
 110
 111 static unsigned int net_debug = NET_DEBUG;
 112
 113 /* Information that need to be kept for each board. */
 114 struct net_local {
 115         struct net_device_stats stats;
 116         int chip_type;          /* one of: CS8900, CS8920, CS8920M */
 117         char chip_revision;     /* revision letter of the chip ('A'...) */
 118         int send_cmd;           /* the propercommand used to send a packet. */
 119         int rx_mode;
 120         int curr_rx_cfg;
 121         int send_underrun;      /* keep track of how many underruns in a row we get */
 122         struct sk_buff *skb;
 123 };
 124
 125 /* Index to functions, as function prototypes. */
 126
 127 #if 0
 128 extern void reset_chip(struct net_device *dev);
 129 #endif
 130 static int net_open(struct net_device *dev);
 131 static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
 132 static irqreturn_t net_interrupt(int irq, void *dev_id);
 133 static void set_multicast_list(struct net_device *dev);
 134 static void net_rx(struct net_device *dev);
 135 static int net_close(struct net_device *dev);
 136 static struct net_device_stats *net_get_stats(struct net_device *dev);
 137 static int set_mac_address(struct net_device *dev, void *addr);
 138
 139
 140 /* Example routines you must write ;->. */
 141 #define tx_done(dev) 1
 142
 143 /* For reading/writing registers ISA-style */
 144 static inline int
 145 readreg_io(struct net_device *dev, int portno)
 146 {
 147         nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
 148         return swab16(nubus_readw(dev->base_addr + DATA_PORT));
 149 }
 150
 151 static inline void
 152 writereg_io(struct net_device *dev, int portno, int value)
 153 {
 154         nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
 155         nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
 156 }
 157
 158 /* These are for reading/writing registers in shared memory */
 159 static inline int
 160 readreg(struct net_device *dev, int portno)
 161 {
 162         return swab16(nubus_readw(dev->mem_start + portno));
 163 }
 164
 165 static inline void
 166 writereg(struct net_device *dev, int portno, int value)
 167 {
 168         nubus_writew(swab16(value), dev->mem_start + portno);
 169 }
 170
 171 /* Probe for the CS8900 card in slot E.  We won't bother looking
 172    anywhere else until we have a really good reason to do so. */
 173 struct net_device * __init mac89x0_probe(int unit)
 174 {
 175         struct net_device *dev;
 176         static int once_is_enough;
 177         struct net_local *lp;
 178         static unsigned version_printed;
 179         int i, slot;
 180         unsigned rev_type = 0;
 181         unsigned long ioaddr;
 182         unsigned short sig;
 183         int err = -ENODEV;
 184
 185         dev = alloc_etherdev(sizeof(struct net_local));
 186         if (!dev)
 187                 return ERR_PTR(-ENOMEM);
 188
 189         if (unit >= 0) {
 190                 sprintf(dev->name, "eth%d", unit);
 191                 netdev_boot_setup_check(dev);
 192         }
 193
 194         SET_MODULE_OWNER(dev);
 195
 196         if (once_is_enough)
 197                 goto out;
 198         once_is_enough = 1;
 199
 200         /* We might have to parameterize this later */
 201         slot = 0xE;
 202         /* Get out now if there's a real NuBus card in slot E */
 203         if (nubus_find_slot(slot, NULL) != NULL)
 204                 goto out;
 205
 206         /* The pseudo-ISA bits always live at offset 0x300 (gee,
 207            wonder why...) */
 208         ioaddr = (unsigned long)
 209                 nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
 210         {
 211                 unsigned long flags;
 212                 int card_present;
 213
 214                 local_irq_save(flags);
 215                 card_present = hwreg_present((void*) ioaddr+4)
 216                   && hwreg_present((void*) ioaddr + DATA_PORT);
 217                 local_irq_restore(flags);
 218
 219                 if (!card_present)
 220                         goto out;
 221         }
 222
 223         nubus_writew(0, ioaddr + ADD_PORT);
 224         sig = nubus_readw(ioaddr + DATA_PORT);
 225         if (sig != swab16(CHIP_EISA_ID_SIG))
 226                 goto out;
 227
 228         /* Initialize the net_device structure. */
 229         lp = netdev_priv(dev);
 230
 231         /* Fill in the 'dev' fields. */
 232         dev->base_addr = ioaddr;
 233         dev->mem_start = (unsigned long)
 234                 nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
 235         dev->mem_end = dev->mem_start + 0x1000;
 236
 237         /* Turn on shared memory */
 238         writereg_io(dev, PP_BusCTL, MEMORY_ON);
 239
 240         /* get the chip type */
 241         rev_type = readreg(dev, PRODUCT_ID_ADD);
 242         lp->chip_type = rev_type &~ REVISON_BITS;
 243         lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
 244
 245         /* Check the chip type and revision in order to set the correct send command
 246         CS8920 revision C and CS8900 revision F can use the faster send. */
 247         lp->send_cmd = TX_AFTER_381;
 248         if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
 249                 lp->send_cmd = TX_NOW;
 250         if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
 251                 lp->send_cmd = TX_NOW;
 252
 253         if (net_debug && version_printed++ == 0)
 254                 printk(version);
 255
 256         printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
 257                dev->name,
 258                lp->chip_type==CS8900?'0':'2',
 259                lp->chip_type==CS8920M?"M":"",
 260                lp->chip_revision,
 261                dev->base_addr);
 262
 263         /* Try to read the MAC address */
 264         if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
 265                 printk("\nmac89x0: No EEPROM, giving up now.\n");
 266                 goto out1;
 267         } else {
 268                 for (i = 0; i < ETH_ALEN; i += 2) {
 269                         /* Big-endian (why??!) */
 270                         unsigned short s = readreg(dev, PP_IA + i);
 271                         dev->dev_addr[i] = s >> 8;
 272                         dev->dev_addr[i+1] = s & 0xff;
 273                 }
 274         }
 275
 276         dev->irq = SLOT2IRQ(slot);
 277         printk(" IRQ %d ADDR ", dev->irq);
 278
 279         /* print the ethernet address. */
 280         for (i = 0; i < ETH_ALEN; i++)
 281                 printk("%2.2x%s", dev->dev_addr[i],
 282                        ((i < ETH_ALEN-1) ? ":" : ""));
 283         printk("\n");
 284
 285         dev->open               = net_open;
 286         dev->stop               = net_close;
 287         dev->hard_start_xmit = net_send_packet;
 288         dev->get_stats  = net_get_stats;
 289         dev->set_multicast_list = &set_multicast_list;
 290         dev->set_mac_address = &set_mac_address;
 291
 292         err = register_netdev(dev);
 293         if (err)
 294                 goto out1;
 295         return 0;
 296 out1:
 297         nubus_writew(0, dev->base_addr + ADD_PORT);
 298 out:
 299         free_netdev(dev);
 300         return ERR_PTR(err);
 301 }
 302
 303 #if 0
 304 /* This is useful for something, but I don't know what yet. */
 305 void __init reset_chip(struct net_device *dev)
 306 {
 307         int reset_start_time;
 308
 309         writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
 310
 311         /* wait 30 ms */
 312         msleep_interruptible(30);
 313
 314         /* Wait until the chip is reset */
 315         reset_start_time = jiffies;
 316         while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
 317                 ;
 318 }
 319 #endif
 320
 321 /* Open/initialize the board.  This is called (in the current kernel)
 322    sometime after booting when the 'ifconfig' program is run.
 323
 324    This routine should set everything up anew at each open, even
 325    registers that "should" only need to be set once at boot, so that
 326    there is non-reboot way to recover if something goes wrong.
 327    */
 328 static int
 329 net_open(struct net_device *dev)
 330 {
 331         struct net_local *lp = netdev_priv(dev);
 332         int i;
 333
 334         /* Disable the interrupt for now */
 335         writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
 336
 337         /* Grab the interrupt */
 338         if (request_irq(dev->irq, &net_interrupt, 0, "cs89x0", dev))
 339                 return -EAGAIN;
 340
 341         /* Set up the IRQ - Apparently magic */
 342         if (lp->chip_type == CS8900)
 343                 writereg(dev, PP_CS8900_ISAINT, 0);
 344         else
 345                 writereg(dev, PP_CS8920_ISAINT, 0);
 346
 347         /* set the Ethernet address */
 348         for (i=0; i < ETH_ALEN/2; i++)
 349                 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
 350
 351         /* Turn on both receive and transmit operations */
 352         writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
 353
 354         /* Receive only error free packets addressed to this card */
 355         lp->rx_mode = 0;
 356         writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
 357
 358         lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
 359
 360         writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
 361
 362         writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
 363                TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
 364
 365         writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
 366                  TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
 367
 368         /* now that we've got our act together, enable everything */
 369         writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
 370         netif_start_queue(dev);
 371         return 0;
 372 }
 373
 374 static int
 375 net_send_packet(struct sk_buff *skb, struct net_device *dev)
 376 {
 377         struct net_local *lp = netdev_priv(dev);
 378         unsigned long flags;
 379
 380         if (net_debug > 3)
 381                 printk("%s: sent %d byte packet of type %x\n",
 382                        dev->name, skb->len,
 383                        (skb->data[ETH_ALEN+ETH_ALEN] << 8)
 384                        | skb->data[ETH_ALEN+ETH_ALEN+1]);
 385
 386         /* keep the upload from being interrupted, since we
 387            ask the chip to start transmitting before the
 388            whole packet has been completely uploaded. */
 389         local_irq_save(flags);
 390         netif_stop_queue(dev);
 391
 392         /* initiate a transmit sequence */
 393         writereg(dev, PP_TxCMD, lp->send_cmd);
 394         writereg(dev, PP_TxLength, skb->len);
 395
 396         /* Test to see if the chip has allocated memory for the packet */
 397         if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
 398                 /* Gasp!  It hasn't.  But that shouldn't happen since
 399                    we're waiting for TxOk, so return 1 and requeue this packet. */
 400                 local_irq_restore(flags);
 401                 return 1;
 402         }
 403
 404         /* Write the contents of the packet */
 405         skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
 406                                   skb->len+1);
 407
 408         local_irq_restore(flags);
 409         dev->trans_start = jiffies;
 410         dev_kfree_skb (skb);
 411
 412         return 0;
 413 }
 414
 415 /* The typical workload of the driver:
 416    Handle the network interface interrupts. */
 417 static irqreturn_t net_interrupt(int irq, void *dev_id)
 418 {
 419         struct net_device *dev = dev_id;
 420         struct net_local *lp;
 421         int ioaddr, status;
 422
 423         if (dev == NULL) {
 424                 printk ("net_interrupt(): irq %d for unknown device.\n", irq);
 425                 return IRQ_NONE;
 426         }
 427
 428         ioaddr = dev->base_addr;
 429         lp = netdev_priv(dev);
 430
 431         /* we MUST read all the events out of the ISQ, otherwise we'll never
 432            get interrupted again.  As a consequence, we can't have any limit
 433            on the number of times we loop in the interrupt handler.  The
 434            hardware guarantees that eventually we'll run out of events.  Of
 435            course, if you're on a slow machine, and packets are arriving
 436            faster than you can read them off, you're screwed.  Hasta la
 437            vista, baby!  */
 438         while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
 439                 if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
 440                 switch(status & ISQ_EVENT_MASK) {
 441                 case ISQ_RECEIVER_EVENT:
 442                         /* Got a packet(s). */
 443                         net_rx(dev);
 444                         break;
 445                 case ISQ_TRANSMITTER_EVENT:
 446                         lp->stats.tx_packets++;
 447                         netif_wake_queue(dev);
 448                         if ((status & TX_OK) == 0) lp->stats.tx_errors++;
 449                         if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
 450                         if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
 451                         if (status & TX_LATE_COL) lp->stats.tx_window_errors++;
 452                         if (status & TX_16_COL) lp->stats.tx_aborted_errors++;
 453                         break;
 454                 case ISQ_BUFFER_EVENT:
 455                         if (status & READY_FOR_TX) {
 456                                 /* we tried to transmit a packet earlier,
 457                                    but inexplicably ran out of buffers.
 458                                    That shouldn't happen since we only ever
 459                                    load one packet.  Shrug.  Do the right
 460                                    thing anyway. */
 461                                 netif_wake_queue(dev);
 462                         }
 463                         if (status & TX_UNDERRUN) {
 464                                 if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
 465                                 lp->send_underrun++;
 466                                 if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
 467                                 else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
 468                         }
 469                         break;
 470                 case ISQ_RX_MISS_EVENT:
 471                         lp->stats.rx_missed_errors += (status >>6);
 472                         break;
 473                 case ISQ_TX_COL_EVENT:
 474                         lp->stats.collisions += (status >>6);
 475                         break;
 476                 }
 477         }
 478         return IRQ_HANDLED;
 479 }
 480
 481 /* We have a good packet(s), get it/them out of the buffers. */
 482 static void
 483 net_rx(struct net_device *dev)
 484 {
 485         struct net_local *lp = netdev_priv(dev);
 486         struct sk_buff *skb;
 487         int status, length;
 488
 489         status = readreg(dev, PP_RxStatus);
 490         if ((status & RX_OK) == 0) {
 491                 lp->stats.rx_errors++;
 492                 if (status & RX_RUNT) lp->stats.rx_length_errors++;
 493                 if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++;
 494                 if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT)))
 495                         /* per str 172 */
 496                         lp->stats.rx_crc_errors++;
 497                 if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++;
 498                 return;
 499         }
 500
 501         length = readreg(dev, PP_RxLength);
 502         /* Malloc up new buffer. */
 503         skb = alloc_skb(length, GFP_ATOMIC);
 504         if (skb == NULL) {
 505                 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
 506                 lp->stats.rx_dropped++;
 507                 return;
 508         }
 509         skb_put(skb, length);
 510
 511         skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
 512                                 length);
 513
 514         if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
 515                                  dev->name, length,
 516                                  (skb->data[ETH_ALEN+ETH_ALEN] << 8)
 517                                  | skb->data[ETH_ALEN+ETH_ALEN+1]);
 518
 519         skb->protocol=eth_type_trans(skb,dev);
 520         netif_rx(skb);
 521         dev->last_rx = jiffies;
 522         lp->stats.rx_packets++;
 523         lp->stats.rx_bytes += length;
 524 }
 525
 526 /* The inverse routine to net_open(). */
 527 static int
 528 net_close(struct net_device *dev)
 529 {
 530
 531         writereg(dev, PP_RxCFG, 0);
 532         writereg(dev, PP_TxCFG, 0);
 533         writereg(dev, PP_BufCFG, 0);
 534         writereg(dev, PP_BusCTL, 0);
 535
 536         netif_stop_queue(dev);
 537
 538         free_irq(dev->irq, dev);
 539
 540         /* Update the statistics here. */
 541
 542         return 0;
 543
 544 }
 545
 546 /* Get the current statistics.  This may be called with the card open or
 547    closed. */
 548 static struct net_device_stats *
 549 net_get_stats(struct net_device *dev)
 550 {
 551         struct net_local *lp = netdev_priv(dev);
 552         unsigned long flags;
 553
 554         local_irq_save(flags);
 555         /* Update the statistics from the device registers. */
 556         lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
 557         lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
 558         local_irq_restore(flags);
 559
 560         return &lp->stats;
 561 }
 562
 563 static void set_multicast_list(struct net_device *dev)
 564 {
 565         struct net_local *lp = netdev_priv(dev);
 566
 567         if(dev->flags&IFF_PROMISC)
 568         {
 569                 lp->rx_mode = RX_ALL_ACCEPT;
 570         }
 571         else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
 572         {
 573                 /* The multicast-accept list is initialized to accept-all, and we
 574                    rely on higher-level filtering for now. */
 575                 lp->rx_mode = RX_MULTCAST_ACCEPT;
 576         }
 577         else
 578                 lp->rx_mode = 0;
 579
 580         writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
 581
 582         /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
 583         writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
 584              (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
 585 }
 586
 587
 588 static int set_mac_address(struct net_device *dev, void *addr)
 589 {
 590         int i;
 591         printk("%s: Setting MAC address to ", dev->name);
 592         for (i = 0; i < 6; i++)
 593                 printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
 594         printk(".\n");
 595         /* set the Ethernet address */
 596         for (i=0; i < ETH_ALEN/2; i++)
 597                 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
 598
 599         return 0;
 600 }
 601
 602 #ifdef MODULE
 603
 604 static struct net_device *dev_cs89x0;
 605 static int debug;
 606
 607 module_param(debug, int, 0);
 608 MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
 609 MODULE_LICENSE("GPL");
 610
 611 int __init
 612 init_module(void)
 613 {
 614         net_debug = debug;
 615         dev_cs89x0 = mac89x0_probe(-1);
 616         if (IS_ERR(dev_cs89x0)) {
 617                 printk(KERN_WARNING "mac89x0.c: No card found\n");
 618                 return PTR_ERR(dev_cs89x0);
 619         }
 620         return 0;
 621 }
 622
 623 void
 624 cleanup_module(void)
 625 {
 626         unregister_netdev(dev_cs89x0);
 627         nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
 628         free_netdev(dev_cs89x0);
 629 }
 630 #endif /* MODULE */
 631
 632 /*
 633  * Local variables:
 634  *  compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h   -c -o mac89x0.o mac89x0.c"
 635  *  version-control: t
 636  *  kept-new-versions: 5
 637  *  c-indent-level: 8
 638  *  tab-width: 8
 639  * End:
 640  *
 641  */