dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
[pv_ops_mirror.git] / arch / avr32 / kernel / kprobes.c
blob4942ee662e0b53c14fb84c572a1902992433a031
1 /*
2 * Kernel Probes (KProbes)
4 * Copyright (C) 2005-2006 Atmel Corporation
6 * Based on arch/ppc64/kernel/kprobes.c
7 * Copyright (C) IBM Corporation, 2002, 2004
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/kprobes.h>
15 #include <linux/ptrace.h>
17 #include <asm/cacheflush.h>
18 #include <linux/kdebug.h>
19 #include <asm/ocd.h>
21 DEFINE_PER_CPU(struct kprobe *, current_kprobe);
22 static unsigned long kprobe_status;
23 static struct pt_regs jprobe_saved_regs;
25 int __kprobes arch_prepare_kprobe(struct kprobe *p)
27 int ret = 0;
29 if ((unsigned long)p->addr & 0x01) {
30 printk("Attempt to register kprobe at an unaligned address\n");
31 ret = -EINVAL;
34 /* XXX: Might be a good idea to check if p->addr is a valid
35 * kernel address as well... */
37 if (!ret) {
38 pr_debug("copy kprobe at %p\n", p->addr);
39 memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
40 p->opcode = *p->addr;
43 return ret;
46 void __kprobes arch_arm_kprobe(struct kprobe *p)
48 pr_debug("arming kprobe at %p\n", p->addr);
49 *p->addr = BREAKPOINT_INSTRUCTION;
50 flush_icache_range((unsigned long)p->addr,
51 (unsigned long)p->addr + sizeof(kprobe_opcode_t));
54 void __kprobes arch_disarm_kprobe(struct kprobe *p)
56 pr_debug("disarming kprobe at %p\n", p->addr);
57 *p->addr = p->opcode;
58 flush_icache_range((unsigned long)p->addr,
59 (unsigned long)p->addr + sizeof(kprobe_opcode_t));
62 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
64 unsigned long dc;
66 pr_debug("preparing to singlestep over %p (PC=%08lx)\n",
67 p->addr, regs->pc);
69 BUG_ON(!(sysreg_read(SR) & SYSREG_BIT(SR_D)));
71 dc = __mfdr(DBGREG_DC);
72 dc |= DC_SS;
73 __mtdr(DBGREG_DC, dc);
76 * We must run the instruction from its original location
77 * since it may actually reference PC.
79 * TODO: Do the instruction replacement directly in icache.
81 *p->addr = p->opcode;
82 flush_icache_range((unsigned long)p->addr,
83 (unsigned long)p->addr + sizeof(kprobe_opcode_t));
86 static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
88 unsigned long dc;
90 pr_debug("resuming execution at PC=%08lx\n", regs->pc);
92 dc = __mfdr(DBGREG_DC);
93 dc &= ~DC_SS;
94 __mtdr(DBGREG_DC, dc);
96 *p->addr = BREAKPOINT_INSTRUCTION;
97 flush_icache_range((unsigned long)p->addr,
98 (unsigned long)p->addr + sizeof(kprobe_opcode_t));
101 static void __kprobes set_current_kprobe(struct kprobe *p)
103 __get_cpu_var(current_kprobe) = p;
106 static int __kprobes kprobe_handler(struct pt_regs *regs)
108 struct kprobe *p;
109 void *addr = (void *)regs->pc;
110 int ret = 0;
112 pr_debug("kprobe_handler: kprobe_running=%p\n",
113 kprobe_running());
116 * We don't want to be preempted for the entire
117 * duration of kprobe processing
119 preempt_disable();
121 /* Check that we're not recursing */
122 if (kprobe_running()) {
123 p = get_kprobe(addr);
124 if (p) {
125 if (kprobe_status == KPROBE_HIT_SS) {
126 printk("FIXME: kprobe hit while single-stepping!\n");
127 goto no_kprobe;
130 printk("FIXME: kprobe hit while handling another kprobe\n");
131 goto no_kprobe;
132 } else {
133 p = kprobe_running();
134 if (p->break_handler && p->break_handler(p, regs))
135 goto ss_probe;
137 /* If it's not ours, can't be delete race, (we hold lock). */
138 goto no_kprobe;
141 p = get_kprobe(addr);
142 if (!p)
143 goto no_kprobe;
145 kprobe_status = KPROBE_HIT_ACTIVE;
146 set_current_kprobe(p);
147 if (p->pre_handler && p->pre_handler(p, regs))
148 /* handler has already set things up, so skip ss setup */
149 return 1;
151 ss_probe:
152 prepare_singlestep(p, regs);
153 kprobe_status = KPROBE_HIT_SS;
154 return 1;
156 no_kprobe:
157 preempt_enable_no_resched();
158 return ret;
161 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
163 struct kprobe *cur = kprobe_running();
165 pr_debug("post_kprobe_handler, cur=%p\n", cur);
167 if (!cur)
168 return 0;
170 if (cur->post_handler) {
171 kprobe_status = KPROBE_HIT_SSDONE;
172 cur->post_handler(cur, regs, 0);
175 resume_execution(cur, regs);
176 reset_current_kprobe();
177 preempt_enable_no_resched();
179 return 1;
182 int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
184 struct kprobe *cur = kprobe_running();
186 pr_debug("kprobe_fault_handler: trapnr=%d\n", trapnr);
188 if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
189 return 1;
191 if (kprobe_status & KPROBE_HIT_SS) {
192 resume_execution(cur, regs);
193 preempt_enable_no_resched();
195 return 0;
199 * Wrapper routine to for handling exceptions.
201 int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
202 unsigned long val, void *data)
204 struct die_args *args = (struct die_args *)data;
205 int ret = NOTIFY_DONE;
207 pr_debug("kprobe_exceptions_notify: val=%lu, data=%p\n",
208 val, data);
210 switch (val) {
211 case DIE_BREAKPOINT:
212 if (kprobe_handler(args->regs))
213 ret = NOTIFY_STOP;
214 break;
215 case DIE_SSTEP:
216 if (post_kprobe_handler(args->regs))
217 ret = NOTIFY_STOP;
218 break;
219 default:
220 break;
223 return ret;
226 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
228 struct jprobe *jp = container_of(p, struct jprobe, kp);
230 memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
233 * TODO: We should probably save some of the stack here as
234 * well, since gcc may pass arguments on the stack for certain
235 * functions (lots of arguments, large aggregates, varargs)
238 /* setup return addr to the jprobe handler routine */
239 regs->pc = (unsigned long)jp->entry;
240 return 1;
243 void __kprobes jprobe_return(void)
245 asm volatile("breakpoint" ::: "memory");
248 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
251 * FIXME - we should ideally be validating that we got here 'cos
252 * of the "trap" in jprobe_return() above, before restoring the
253 * saved regs...
255 memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
256 return 1;
259 int __init arch_init_kprobes(void)
261 printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
262 __mtdr(DBGREG_DC, DC_MM | DC_DBE);
264 /* TODO: Register kretprobe trampoline */
265 return 0;