2 * acpi.c - Architecture-Specific Low-Level ACPI Support
4 * Copyright (C) 1999 VA Linux Systems
5 * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
6 * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
7 * David Mosberger-Tang <davidm@hpl.hp.com>
8 * Copyright (C) 2000 Intel Corp.
9 * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
10 * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
11 * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com>
12 * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com>
13 * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de>
14 * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com>
16 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License as published by
20 * the Free Software Foundation; either version 2 of the License, or
21 * (at your option) any later version.
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
32 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/kernel.h>
38 #include <linux/sched.h>
39 #include <linux/smp.h>
40 #include <linux/string.h>
41 #include <linux/types.h>
42 #include <linux/irq.h>
43 #include <linux/acpi.h>
44 #include <linux/efi.h>
45 #include <linux/mmzone.h>
46 #include <linux/nodemask.h>
48 #include <asm/iosapic.h>
49 #include <asm/machvec.h>
51 #include <asm/system.h>
54 #include <asm/cyclone.h>
56 #define BAD_MADT_ENTRY(entry, end) ( \
57 (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
58 ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
60 #define PREFIX "ACPI: "
62 void (*pm_idle
) (void);
63 EXPORT_SYMBOL(pm_idle
);
64 void (*pm_power_off
) (void);
65 EXPORT_SYMBOL(pm_power_off
);
67 unsigned int acpi_cpei_override
;
68 unsigned int acpi_cpei_phys_cpuid
;
71 acpi_get_sysname(void)
73 #ifdef CONFIG_IA64_GENERIC
74 unsigned long rsdp_phys
;
75 struct acpi_table_rsdp
*rsdp
;
76 struct acpi_table_xsdt
*xsdt
;
77 struct acpi_table_header
*hdr
;
79 rsdp_phys
= acpi_find_rsdp();
82 "ACPI 2.0 RSDP not found, default to \"dig\"\n");
86 rsdp
= (struct acpi_table_rsdp
*)__va(rsdp_phys
);
87 if (strncmp(rsdp
->signature
, ACPI_SIG_RSDP
, sizeof(ACPI_SIG_RSDP
) - 1)) {
89 "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
93 xsdt
= (struct acpi_table_xsdt
*)__va(rsdp
->xsdt_physical_address
);
95 if (strncmp(hdr
->signature
, ACPI_SIG_XSDT
, sizeof(ACPI_SIG_XSDT
) - 1)) {
97 "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
101 if (!strcmp(hdr
->oem_id
, "HP")) {
103 } else if (!strcmp(hdr
->oem_id
, "SGI")) {
109 # if defined (CONFIG_IA64_HP_SIM)
111 # elif defined (CONFIG_IA64_HP_ZX1)
113 # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
114 return "hpzx1_swiotlb";
115 # elif defined (CONFIG_IA64_SGI_SN2)
117 # elif defined (CONFIG_IA64_DIG)
120 # error Unknown platform. Fix acpi.c.
127 #define ACPI_MAX_PLATFORM_INTERRUPTS 256
129 /* Array to record platform interrupt vectors for generic interrupt routing. */
130 int platform_intr_list
[ACPI_MAX_PLATFORM_INTERRUPTS
] = {
131 [0 ... ACPI_MAX_PLATFORM_INTERRUPTS
- 1] = -1
134 enum acpi_irq_model_id acpi_irq_model
= ACPI_IRQ_MODEL_IOSAPIC
;
137 * Interrupt routing API for device drivers. Provides interrupt vector for
138 * a generic platform event. Currently only CPEI is implemented.
140 int acpi_request_vector(u32 int_type
)
144 if (int_type
< ACPI_MAX_PLATFORM_INTERRUPTS
) {
145 /* corrected platform error interrupt */
146 vector
= platform_intr_list
[int_type
];
149 "acpi_request_vector(): invalid interrupt type\n");
153 char *__acpi_map_table(unsigned long phys_addr
, unsigned long size
)
155 return __va(phys_addr
);
158 /* --------------------------------------------------------------------------
159 Boot-time Table Parsing
160 -------------------------------------------------------------------------- */
162 static int total_cpus __initdata
;
163 static int available_cpus __initdata
;
164 struct acpi_table_madt
*acpi_madt __initdata
;
168 acpi_parse_lapic_addr_ovr(struct acpi_subtable_header
* header
,
169 const unsigned long end
)
171 struct acpi_madt_local_apic_override
*lapic
;
173 lapic
= (struct acpi_madt_local_apic_override
*)header
;
175 if (BAD_MADT_ENTRY(lapic
, end
))
178 if (lapic
->address
) {
179 iounmap(ipi_base_addr
);
180 ipi_base_addr
= ioremap(lapic
->address
, 0);
186 acpi_parse_lsapic(struct acpi_subtable_header
* header
, const unsigned long end
)
188 struct acpi_madt_local_sapic
*lsapic
;
190 lsapic
= (struct acpi_madt_local_sapic
*)header
;
192 /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */
194 if (lsapic
->lapic_flags
& ACPI_MADT_ENABLED
) {
196 smp_boot_data
.cpu_phys_id
[available_cpus
] =
197 (lsapic
->id
<< 8) | lsapic
->eid
;
207 acpi_parse_lapic_nmi(struct acpi_subtable_header
* header
, const unsigned long end
)
209 struct acpi_madt_local_apic_nmi
*lacpi_nmi
;
211 lacpi_nmi
= (struct acpi_madt_local_apic_nmi
*)header
;
213 if (BAD_MADT_ENTRY(lacpi_nmi
, end
))
216 /* TBD: Support lapic_nmi entries */
221 acpi_parse_iosapic(struct acpi_subtable_header
* header
, const unsigned long end
)
223 struct acpi_madt_io_sapic
*iosapic
;
225 iosapic
= (struct acpi_madt_io_sapic
*)header
;
227 if (BAD_MADT_ENTRY(iosapic
, end
))
230 return iosapic_init(iosapic
->address
, iosapic
->global_irq_base
);
233 static unsigned int __initdata acpi_madt_rev
;
236 acpi_parse_plat_int_src(struct acpi_subtable_header
* header
,
237 const unsigned long end
)
239 struct acpi_madt_interrupt_source
*plintsrc
;
242 plintsrc
= (struct acpi_madt_interrupt_source
*)header
;
244 if (BAD_MADT_ENTRY(plintsrc
, end
))
248 * Get vector assignment for this interrupt, set attributes,
249 * and program the IOSAPIC routing table.
251 vector
= iosapic_register_platform_intr(plintsrc
->type
,
252 plintsrc
->global_irq
,
253 plintsrc
->io_sapic_vector
,
256 ((plintsrc
->inti_flags
& ACPI_MADT_POLARITY_MASK
) ==
257 ACPI_MADT_POLARITY_ACTIVE_HIGH
) ?
258 IOSAPIC_POL_HIGH
: IOSAPIC_POL_LOW
,
259 ((plintsrc
->inti_flags
& ACPI_MADT_TRIGGER_MASK
) ==
260 ACPI_MADT_TRIGGER_EDGE
) ?
261 IOSAPIC_EDGE
: IOSAPIC_LEVEL
);
263 platform_intr_list
[plintsrc
->type
] = vector
;
264 if (acpi_madt_rev
> 1) {
265 acpi_cpei_override
= plintsrc
->flags
& ACPI_MADT_CPEI_OVERRIDE
;
269 * Save the physical id, so we can check when its being removed
271 acpi_cpei_phys_cpuid
= ((plintsrc
->id
<< 8) | (plintsrc
->eid
)) & 0xffff;
276 #ifdef CONFIG_HOTPLUG_CPU
277 unsigned int can_cpei_retarget(void)
279 extern int cpe_vector
;
280 extern unsigned int force_cpei_retarget
;
283 * Only if CPEI is supported and the override flag
284 * is present, otherwise return that its re-targettable
285 * if we are in polling mode.
287 if (cpe_vector
> 0) {
288 if (acpi_cpei_override
|| force_cpei_retarget
)
296 unsigned int is_cpu_cpei_target(unsigned int cpu
)
298 unsigned int logical_id
;
300 logical_id
= cpu_logical_id(acpi_cpei_phys_cpuid
);
302 if (logical_id
== cpu
)
308 void set_cpei_target_cpu(unsigned int cpu
)
310 acpi_cpei_phys_cpuid
= cpu_physical_id(cpu
);
314 unsigned int get_cpei_target_cpu(void)
316 return acpi_cpei_phys_cpuid
;
320 acpi_parse_int_src_ovr(struct acpi_subtable_header
* header
,
321 const unsigned long end
)
323 struct acpi_madt_interrupt_override
*p
;
325 p
= (struct acpi_madt_interrupt_override
*)header
;
327 if (BAD_MADT_ENTRY(p
, end
))
330 iosapic_override_isa_irq(p
->source_irq
, p
->global_irq
,
331 ((p
->inti_flags
& ACPI_MADT_POLARITY_MASK
) ==
332 ACPI_MADT_POLARITY_ACTIVE_HIGH
) ?
333 IOSAPIC_POL_HIGH
: IOSAPIC_POL_LOW
,
334 ((p
->inti_flags
& ACPI_MADT_TRIGGER_MASK
) ==
335 ACPI_MADT_TRIGGER_EDGE
) ?
336 IOSAPIC_EDGE
: IOSAPIC_LEVEL
);
341 acpi_parse_nmi_src(struct acpi_subtable_header
* header
, const unsigned long end
)
343 struct acpi_madt_nmi_source
*nmi_src
;
345 nmi_src
= (struct acpi_madt_nmi_source
*)header
;
347 if (BAD_MADT_ENTRY(nmi_src
, end
))
350 /* TBD: Support nimsrc entries */
354 static void __init
acpi_madt_oem_check(char *oem_id
, char *oem_table_id
)
356 if (!strncmp(oem_id
, "IBM", 3) && (!strncmp(oem_table_id
, "SERMOW", 6))) {
359 * Unfortunately ITC_DRIFT is not yet part of the
360 * official SAL spec, so the ITC_DRIFT bit is not
361 * set by the BIOS on this hardware.
363 sal_platform_features
|= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT
;
369 static int __init
acpi_parse_madt(struct acpi_table_header
*table
)
374 acpi_madt
= (struct acpi_table_madt
*)table
;
376 acpi_madt_rev
= acpi_madt
->header
.revision
;
378 /* remember the value for reference after free_initmem() */
379 #ifdef CONFIG_ITANIUM
380 has_8259
= 1; /* Firmware on old Itanium systems is broken */
382 has_8259
= acpi_madt
->flags
& ACPI_MADT_PCAT_COMPAT
;
384 iosapic_system_init(has_8259
);
386 /* Get base address of IPI Message Block */
388 if (acpi_madt
->address
)
389 ipi_base_addr
= ioremap(acpi_madt
->address
, 0);
391 printk(KERN_INFO PREFIX
"Local APIC address %p\n", ipi_base_addr
);
393 acpi_madt_oem_check(acpi_madt
->header
.oem_id
,
394 acpi_madt
->header
.oem_table_id
);
399 #ifdef CONFIG_ACPI_NUMA
403 #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
405 static int __initdata srat_num_cpus
; /* number of cpus */
406 static u32 __devinitdata pxm_flag
[PXM_FLAG_LEN
];
407 #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag))
408 #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag))
409 static struct acpi_table_slit __initdata
*slit_table
;
411 static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity
*pa
)
415 pxm
= pa
->proximity_domain_lo
;
416 if (ia64_platform_is("sn2"))
417 pxm
+= pa
->proximity_domain_hi
[0] << 8;
421 static int get_memory_proximity_domain(struct acpi_srat_mem_affinity
*ma
)
425 pxm
= ma
->proximity_domain
;
426 if (!ia64_platform_is("sn2"))
433 * ACPI 2.0 SLIT (System Locality Information Table)
434 * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
436 void __init
acpi_numa_slit_init(struct acpi_table_slit
*slit
)
440 len
= sizeof(struct acpi_table_header
) + 8
441 + slit
->locality_count
* slit
->locality_count
;
442 if (slit
->header
.length
!= len
) {
444 "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
445 len
, slit
->header
.length
);
446 memset(numa_slit
, 10, sizeof(numa_slit
));
453 acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity
*pa
)
457 if (!(pa
->flags
& ACPI_SRAT_CPU_ENABLED
))
460 pxm
= get_processor_proximity_domain(pa
);
462 /* record this node in proximity bitmap */
465 node_cpuid
[srat_num_cpus
].phys_id
=
466 (pa
->apic_id
<< 8) | (pa
->local_sapic_eid
);
467 /* nid should be overridden as logical node id later */
468 node_cpuid
[srat_num_cpus
].nid
= pxm
;
473 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity
*ma
)
475 unsigned long paddr
, size
;
477 struct node_memblk_s
*p
, *q
, *pend
;
479 pxm
= get_memory_proximity_domain(ma
);
481 /* fill node memory chunk structure */
482 paddr
= ma
->base_address
;
485 /* Ignore disabled entries */
486 if (!(ma
->flags
& ACPI_SRAT_MEM_ENABLED
))
489 /* record this node in proximity bitmap */
492 /* Insertion sort based on base address */
493 pend
= &node_memblk
[num_node_memblks
];
494 for (p
= &node_memblk
[0]; p
< pend
; p
++) {
495 if (paddr
< p
->start_paddr
)
499 for (q
= pend
- 1; q
>= p
; q
--)
502 p
->start_paddr
= paddr
;
508 void __init
acpi_numa_arch_fixup(void)
510 int i
, j
, node_from
, node_to
;
512 /* If there's no SRAT, fix the phys_id and mark node 0 online */
513 if (srat_num_cpus
== 0) {
515 node_cpuid
[0].phys_id
= hard_smp_processor_id();
520 * MCD - This can probably be dropped now. No need for pxm ID to node ID
521 * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
523 nodes_clear(node_online_map
);
524 for (i
= 0; i
< MAX_PXM_DOMAINS
; i
++) {
525 if (pxm_bit_test(i
)) {
526 int nid
= acpi_map_pxm_to_node(i
);
527 node_set_online(nid
);
531 /* set logical node id in memory chunk structure */
532 for (i
= 0; i
< num_node_memblks
; i
++)
533 node_memblk
[i
].nid
= pxm_to_node(node_memblk
[i
].nid
);
535 /* assign memory bank numbers for each chunk on each node */
536 for_each_online_node(i
) {
540 for (j
= 0; j
< num_node_memblks
; j
++)
541 if (node_memblk
[j
].nid
== i
)
542 node_memblk
[j
].bank
= bank
++;
545 /* set logical node id in cpu structure */
546 for (i
= 0; i
< srat_num_cpus
; i
++)
547 node_cpuid
[i
].nid
= pxm_to_node(node_cpuid
[i
].nid
);
549 printk(KERN_INFO
"Number of logical nodes in system = %d\n",
551 printk(KERN_INFO
"Number of memory chunks in system = %d\n",
556 memset(numa_slit
, -1, sizeof(numa_slit
));
557 for (i
= 0; i
< slit_table
->locality_count
; i
++) {
558 if (!pxm_bit_test(i
))
560 node_from
= pxm_to_node(i
);
561 for (j
= 0; j
< slit_table
->locality_count
; j
++) {
562 if (!pxm_bit_test(j
))
564 node_to
= pxm_to_node(j
);
565 node_distance(node_from
, node_to
) =
566 slit_table
->entry
[i
* slit_table
->locality_count
+ j
];
571 printk("ACPI 2.0 SLIT locality table:\n");
572 for_each_online_node(i
) {
573 for_each_online_node(j
)
574 printk("%03d ", node_distance(i
, j
));
579 #endif /* CONFIG_ACPI_NUMA */
582 * success: return IRQ number (>=0)
583 * failure: return < 0
585 int acpi_register_gsi(u32 gsi
, int triggering
, int polarity
)
587 if (acpi_irq_model
== ACPI_IRQ_MODEL_PLATFORM
)
590 if (has_8259
&& gsi
< 16)
591 return isa_irq_to_vector(gsi
);
593 return iosapic_register_intr(gsi
,
595 ACPI_ACTIVE_HIGH
) ? IOSAPIC_POL_HIGH
:
598 ACPI_EDGE_SENSITIVE
) ? IOSAPIC_EDGE
:
602 EXPORT_SYMBOL(acpi_register_gsi
);
604 void acpi_unregister_gsi(u32 gsi
)
606 if (acpi_irq_model
== ACPI_IRQ_MODEL_PLATFORM
)
609 iosapic_unregister_intr(gsi
);
612 EXPORT_SYMBOL(acpi_unregister_gsi
);
614 static int __init
acpi_parse_fadt(struct acpi_table_header
*table
)
616 struct acpi_table_header
*fadt_header
;
617 struct acpi_table_fadt
*fadt
;
622 fadt_header
= (struct acpi_table_header
*)table
;
623 if (fadt_header
->revision
!= 3)
624 return -ENODEV
; /* Only deal with ACPI 2.0 FADT */
626 fadt
= (struct acpi_table_fadt
*)fadt_header
;
628 acpi_register_gsi(fadt
->sci_interrupt
, ACPI_LEVEL_SENSITIVE
, ACPI_ACTIVE_LOW
);
632 unsigned long __init
acpi_find_rsdp(void)
634 unsigned long rsdp_phys
= 0;
636 if (efi
.acpi20
!= EFI_INVALID_TABLE_ADDR
)
637 rsdp_phys
= efi
.acpi20
;
638 else if (efi
.acpi
!= EFI_INVALID_TABLE_ADDR
)
639 printk(KERN_WARNING PREFIX
640 "v1.0/r0.71 tables no longer supported\n");
644 int __init
acpi_boot_init(void)
650 * Parse the Multiple APIC Description Table (MADT), if exists.
651 * Note that this table provides platform SMP configuration
652 * information -- the successor to MPS tables.
655 if (acpi_table_parse(ACPI_SIG_MADT
, acpi_parse_madt
)) {
656 printk(KERN_ERR PREFIX
"Can't find MADT\n");
662 if (acpi_table_parse_madt
663 (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE
, acpi_parse_lapic_addr_ovr
, 0) < 0)
664 printk(KERN_ERR PREFIX
665 "Error parsing LAPIC address override entry\n");
667 if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC
, acpi_parse_lsapic
, NR_CPUS
)
669 printk(KERN_ERR PREFIX
670 "Error parsing MADT - no LAPIC entries\n");
672 if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI
, acpi_parse_lapic_nmi
, 0)
674 printk(KERN_ERR PREFIX
"Error parsing LAPIC NMI entry\n");
678 if (acpi_table_parse_madt
679 (ACPI_MADT_TYPE_IO_SAPIC
, acpi_parse_iosapic
, NR_IOSAPICS
) < 1)
680 printk(KERN_ERR PREFIX
681 "Error parsing MADT - no IOSAPIC entries\n");
683 /* System-Level Interrupt Routing */
685 if (acpi_table_parse_madt
686 (ACPI_MADT_TYPE_INTERRUPT_SOURCE
, acpi_parse_plat_int_src
,
687 ACPI_MAX_PLATFORM_INTERRUPTS
) < 0)
688 printk(KERN_ERR PREFIX
689 "Error parsing platform interrupt source entry\n");
691 if (acpi_table_parse_madt
692 (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE
, acpi_parse_int_src_ovr
, 0) < 0)
693 printk(KERN_ERR PREFIX
694 "Error parsing interrupt source overrides entry\n");
696 if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE
, acpi_parse_nmi_src
, 0) < 0)
697 printk(KERN_ERR PREFIX
"Error parsing NMI SRC entry\n");
701 * FADT says whether a legacy keyboard controller is present.
702 * The FADT also contains an SCI_INT line, by which the system
703 * gets interrupts such as power and sleep buttons. If it's not
704 * on a Legacy interrupt, it needs to be setup.
706 if (acpi_table_parse(ACPI_SIG_FADT
, acpi_parse_fadt
))
707 printk(KERN_ERR PREFIX
"Can't find FADT\n");
710 if (available_cpus
== 0) {
711 printk(KERN_INFO
"ACPI: Found 0 CPUS; assuming 1\n");
712 printk(KERN_INFO
"CPU 0 (0x%04x)", hard_smp_processor_id());
713 smp_boot_data
.cpu_phys_id
[available_cpus
] =
714 hard_smp_processor_id();
715 available_cpus
= 1; /* We've got at least one of these, no? */
717 smp_boot_data
.cpu_count
= available_cpus
;
720 # ifdef CONFIG_ACPI_NUMA
721 if (srat_num_cpus
== 0) {
723 for (cpu
= 0; cpu
< smp_boot_data
.cpu_count
; cpu
++)
724 if (smp_boot_data
.cpu_phys_id
[cpu
] !=
725 hard_smp_processor_id())
726 node_cpuid
[i
++].phys_id
=
727 smp_boot_data
.cpu_phys_id
[cpu
];
731 #ifdef CONFIG_ACPI_NUMA
732 build_cpu_to_node_map();
734 /* Make boot-up look pretty */
735 printk(KERN_INFO
"%d CPUs available, %d CPUs total\n", available_cpus
,
740 int acpi_gsi_to_irq(u32 gsi
, unsigned int *irq
)
744 if (has_8259
&& gsi
< 16)
745 *irq
= isa_irq_to_vector(gsi
);
747 vector
= gsi_to_vector(gsi
);
757 * ACPI based hotplug CPU support
759 #ifdef CONFIG_ACPI_HOTPLUG_CPU
761 int acpi_map_cpu2node(acpi_handle handle
, int cpu
, long physid
)
763 #ifdef CONFIG_ACPI_NUMA
767 pxm_id
= acpi_get_pxm(handle
);
769 * We don't have cpu-only-node hotadd. But if the system equips
770 * SRAT table, pxm is already found and node is ready.
771 * So, just pxm_to_nid(pxm) is OK.
772 * This code here is for the system which doesn't have full SRAT
773 * table for possible cpus.
775 nid
= acpi_map_pxm_to_node(pxm_id
);
776 node_cpuid
[cpu
].phys_id
= physid
;
777 node_cpuid
[cpu
].nid
= nid
;
782 int additional_cpus __initdata
= -1;
784 static __init
int setup_additional_cpus(char *s
)
787 additional_cpus
= simple_strtol(s
, NULL
, 0);
792 early_param("additional_cpus", setup_additional_cpus
);
795 * cpu_possible_map should be static, it cannot change as CPUs
796 * are onlined, or offlined. The reason is per-cpu data-structures
797 * are allocated by some modules at init time, and dont expect to
798 * do this dynamically on cpu arrival/departure.
799 * cpu_present_map on the other hand can change dynamically.
800 * In case when cpu_hotplug is not compiled, then we resort to current
801 * behaviour, which is cpu_possible == cpu_present.
804 * Three ways to find out the number of additional hotplug CPUs:
805 * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
806 * - The user can overwrite it with additional_cpus=NUM
807 * - Otherwise don't reserve additional CPUs.
809 __init
void prefill_possible_map(void)
812 int possible
, disabled_cpus
;
814 disabled_cpus
= total_cpus
- available_cpus
;
816 if (additional_cpus
== -1) {
817 if (disabled_cpus
> 0)
818 additional_cpus
= disabled_cpus
;
823 possible
= available_cpus
+ additional_cpus
;
825 if (possible
> NR_CPUS
)
828 printk(KERN_INFO
"SMP: Allowing %d CPUs, %d hotplug CPUs\n",
829 possible
, max((possible
- available_cpus
), 0));
831 for (i
= 0; i
< possible
; i
++)
832 cpu_set(i
, cpu_possible_map
);
835 int acpi_map_lsapic(acpi_handle handle
, int *pcpu
)
837 struct acpi_buffer buffer
= { ACPI_ALLOCATE_BUFFER
, NULL
};
838 union acpi_object
*obj
;
839 struct acpi_madt_local_sapic
*lsapic
;
844 if (ACPI_FAILURE(acpi_evaluate_object(handle
, "_MAT", NULL
, &buffer
)))
847 if (!buffer
.length
|| !buffer
.pointer
)
850 obj
= buffer
.pointer
;
851 if (obj
->type
!= ACPI_TYPE_BUFFER
)
853 kfree(buffer
.pointer
);
857 lsapic
= (struct acpi_madt_local_sapic
*)obj
->buffer
.pointer
;
859 if ((lsapic
->header
.type
!= ACPI_MADT_TYPE_LOCAL_SAPIC
) ||
860 (!lsapic
->lapic_flags
& ACPI_MADT_ENABLED
)) {
861 kfree(buffer
.pointer
);
865 physid
= ((lsapic
->id
<< 8) | (lsapic
->eid
));
867 kfree(buffer
.pointer
);
868 buffer
.length
= ACPI_ALLOCATE_BUFFER
;
869 buffer
.pointer
= NULL
;
871 cpus_complement(tmp_map
, cpu_present_map
);
872 cpu
= first_cpu(tmp_map
);
876 acpi_map_cpu2node(handle
, cpu
, physid
);
878 cpu_set(cpu
, cpu_present_map
);
879 ia64_cpu_to_sapicid
[cpu
] = physid
;
885 EXPORT_SYMBOL(acpi_map_lsapic
);
887 int acpi_unmap_lsapic(int cpu
)
889 ia64_cpu_to_sapicid
[cpu
] = -1;
890 cpu_clear(cpu
, cpu_present_map
);
892 #ifdef CONFIG_ACPI_NUMA
893 /* NUMA specific cleanup's */
899 EXPORT_SYMBOL(acpi_unmap_lsapic
);
900 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
902 #ifdef CONFIG_ACPI_NUMA
903 static acpi_status __devinit
904 acpi_map_iosapic(acpi_handle handle
, u32 depth
, void *context
, void **ret
)
906 struct acpi_buffer buffer
= { ACPI_ALLOCATE_BUFFER
, NULL
};
907 union acpi_object
*obj
;
908 struct acpi_madt_io_sapic
*iosapic
;
909 unsigned int gsi_base
;
912 /* Only care about objects w/ a method that returns the MADT */
913 if (ACPI_FAILURE(acpi_evaluate_object(handle
, "_MAT", NULL
, &buffer
)))
916 if (!buffer
.length
|| !buffer
.pointer
)
919 obj
= buffer
.pointer
;
920 if (obj
->type
!= ACPI_TYPE_BUFFER
||
921 obj
->buffer
.length
< sizeof(*iosapic
)) {
922 kfree(buffer
.pointer
);
926 iosapic
= (struct acpi_madt_io_sapic
*)obj
->buffer
.pointer
;
928 if (iosapic
->header
.type
!= ACPI_MADT_TYPE_IO_SAPIC
) {
929 kfree(buffer
.pointer
);
933 gsi_base
= iosapic
->global_irq_base
;
935 kfree(buffer
.pointer
);
938 * OK, it's an IOSAPIC MADT entry, look for a _PXM value to tell
939 * us which node to associate this with.
941 pxm
= acpi_get_pxm(handle
);
945 node
= pxm_to_node(pxm
);
947 if (node
>= MAX_NUMNODES
|| !node_online(node
) ||
948 cpus_empty(node_to_cpumask(node
)))
951 /* We know a gsi to node mapping! */
952 map_iosapic_to_node(gsi_base
, node
);
957 acpi_map_iosapics (void)
959 acpi_get_devices(NULL
, acpi_map_iosapic
, NULL
, NULL
);
963 fs_initcall(acpi_map_iosapics
);
964 #endif /* CONFIG_ACPI_NUMA */
966 int acpi_register_ioapic(acpi_handle handle
, u64 phys_addr
, u32 gsi_base
)
970 if ((err
= iosapic_init(phys_addr
, gsi_base
)))
973 #ifdef CONFIG_ACPI_NUMA
974 acpi_map_iosapic(handle
, 0, NULL
, NULL
);
975 #endif /* CONFIG_ACPI_NUMA */
980 EXPORT_SYMBOL(acpi_register_ioapic
);
982 int acpi_unregister_ioapic(acpi_handle handle
, u32 gsi_base
)
984 return iosapic_remove(gsi_base
);
987 EXPORT_SYMBOL(acpi_unregister_ioapic
);
989 #endif /* CONFIG_ACPI */