1 /*************************************************************************
2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
4 * Copyright (C) 2005 - 2007 Myricom, Inc.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
32 * If the eeprom on your board is not recent enough, you will need to get a
33 * newer firmware image at:
34 * http://www.myri.com/scs/download-Myri10GE.html
36 * Contact Information:
38 * Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
39 *************************************************************************/
41 #include <linux/tcp.h>
42 #include <linux/netdevice.h>
43 #include <linux/skbuff.h>
44 #include <linux/string.h>
45 #include <linux/module.h>
46 #include <linux/pci.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/etherdevice.h>
49 #include <linux/if_ether.h>
50 #include <linux/if_vlan.h>
51 #include <linux/inet_lro.h>
53 #include <linux/inet.h>
55 #include <linux/ethtool.h>
56 #include <linux/firmware.h>
57 #include <linux/delay.h>
58 #include <linux/version.h>
59 #include <linux/timer.h>
60 #include <linux/vmalloc.h>
61 #include <linux/crc32.h>
62 #include <linux/moduleparam.h>
64 #include <linux/log2.h>
65 #include <net/checksum.h>
68 #include <asm/byteorder.h>
70 #include <asm/processor.h>
75 #include "myri10ge_mcp.h"
76 #include "myri10ge_mcp_gen_header.h"
78 #define MYRI10GE_VERSION_STR "1.3.2-1.287"
80 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
81 MODULE_AUTHOR("Maintainer: help@myri.com");
82 MODULE_VERSION(MYRI10GE_VERSION_STR
);
83 MODULE_LICENSE("Dual BSD/GPL");
85 #define MYRI10GE_MAX_ETHER_MTU 9014
87 #define MYRI10GE_ETH_STOPPED 0
88 #define MYRI10GE_ETH_STOPPING 1
89 #define MYRI10GE_ETH_STARTING 2
90 #define MYRI10GE_ETH_RUNNING 3
91 #define MYRI10GE_ETH_OPEN_FAILED 4
93 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
94 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
95 #define MYRI10GE_MAX_LRO_DESCRIPTORS 8
96 #define MYRI10GE_LRO_MAX_PKTS 64
98 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
99 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
101 #define MYRI10GE_ALLOC_ORDER 0
102 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
103 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
105 struct myri10ge_rx_buffer_state
{
108 DECLARE_PCI_UNMAP_ADDR(bus
)
109 DECLARE_PCI_UNMAP_LEN(len
)
112 struct myri10ge_tx_buffer_state
{
115 DECLARE_PCI_UNMAP_ADDR(bus
)
116 DECLARE_PCI_UNMAP_LEN(len
)
119 struct myri10ge_cmd
{
125 struct myri10ge_rx_buf
{
126 struct mcp_kreq_ether_recv __iomem
*lanai
; /* lanai ptr for recv ring */
127 u8 __iomem
*wc_fifo
; /* w/c rx dma addr fifo address */
128 struct mcp_kreq_ether_recv
*shadow
; /* host shadow of recv ring */
129 struct myri10ge_rx_buffer_state
*info
;
136 int mask
; /* number of rx slots -1 */
140 struct myri10ge_tx_buf
{
141 struct mcp_kreq_ether_send __iomem
*lanai
; /* lanai ptr for sendq */
142 u8 __iomem
*wc_fifo
; /* w/c send fifo address */
143 struct mcp_kreq_ether_send
*req_list
; /* host shadow of sendq */
145 struct myri10ge_tx_buffer_state
*info
;
146 int mask
; /* number of transmit slots -1 */
147 int boundary
; /* boundary transmits cannot cross */
148 int req ____cacheline_aligned
; /* transmit slots submitted */
149 int pkt_start
; /* packets started */
150 int done ____cacheline_aligned
; /* transmit slots completed */
151 int pkt_done
; /* packets completed */
154 struct myri10ge_rx_done
{
155 struct mcp_slot
*entry
;
159 struct net_lro_mgr lro_mgr
;
160 struct net_lro_desc lro_desc
[MYRI10GE_MAX_LRO_DESCRIPTORS
];
163 struct myri10ge_priv
{
164 int running
; /* running? */
165 int csum_flag
; /* rx_csums? */
166 struct myri10ge_tx_buf tx
; /* transmit ring */
167 struct myri10ge_rx_buf rx_small
;
168 struct myri10ge_rx_buf rx_big
;
169 struct myri10ge_rx_done rx_done
;
172 struct net_device
*dev
;
173 struct napi_struct napi
;
174 struct net_device_stats stats
;
177 unsigned long board_span
;
178 unsigned long iomem_base
;
179 __be32 __iomem
*irq_claim
;
180 __be32 __iomem
*irq_deassert
;
181 char *mac_addr_string
;
182 struct mcp_cmd_response
*cmd
;
184 struct mcp_irq_data
*fw_stats
;
185 dma_addr_t fw_stats_bus
;
186 struct pci_dev
*pdev
;
189 unsigned int rdma_tags_available
;
191 __be32 __iomem
*intr_coal_delay_ptr
;
197 wait_queue_head_t down_wq
;
198 struct work_struct watchdog_work
;
199 struct timer_list watchdog_timer
;
200 int watchdog_tx_done
;
207 char eeprom_strings
[MYRI10GE_EEPROM_STRINGS_SIZE
];
208 char fw_version
[128];
212 int adopted_rx_filter_bug
;
213 u8 mac_addr
[6]; /* eeprom mac address */
214 unsigned long serial_number
;
215 int vendor_specific_offset
;
216 int fw_multicast_support
;
217 unsigned long features
;
226 static char *myri10ge_fw_unaligned
= "myri10ge_ethp_z8e.dat";
227 static char *myri10ge_fw_aligned
= "myri10ge_eth_z8e.dat";
229 static char *myri10ge_fw_name
= NULL
;
230 module_param(myri10ge_fw_name
, charp
, S_IRUGO
| S_IWUSR
);
231 MODULE_PARM_DESC(myri10ge_fw_name
, "Firmware image name\n");
233 static int myri10ge_ecrc_enable
= 1;
234 module_param(myri10ge_ecrc_enable
, int, S_IRUGO
);
235 MODULE_PARM_DESC(myri10ge_ecrc_enable
, "Enable Extended CRC on PCI-E\n");
237 static int myri10ge_max_intr_slots
= 1024;
238 module_param(myri10ge_max_intr_slots
, int, S_IRUGO
);
239 MODULE_PARM_DESC(myri10ge_max_intr_slots
, "Interrupt queue slots\n");
241 static int myri10ge_small_bytes
= -1; /* -1 == auto */
242 module_param(myri10ge_small_bytes
, int, S_IRUGO
| S_IWUSR
);
243 MODULE_PARM_DESC(myri10ge_small_bytes
, "Threshold of small packets\n");
245 static int myri10ge_msi
= 1; /* enable msi by default */
246 module_param(myri10ge_msi
, int, S_IRUGO
| S_IWUSR
);
247 MODULE_PARM_DESC(myri10ge_msi
, "Enable Message Signalled Interrupts\n");
249 static int myri10ge_intr_coal_delay
= 75;
250 module_param(myri10ge_intr_coal_delay
, int, S_IRUGO
);
251 MODULE_PARM_DESC(myri10ge_intr_coal_delay
, "Interrupt coalescing delay\n");
253 static int myri10ge_flow_control
= 1;
254 module_param(myri10ge_flow_control
, int, S_IRUGO
);
255 MODULE_PARM_DESC(myri10ge_flow_control
, "Pause parameter\n");
257 static int myri10ge_deassert_wait
= 1;
258 module_param(myri10ge_deassert_wait
, int, S_IRUGO
| S_IWUSR
);
259 MODULE_PARM_DESC(myri10ge_deassert_wait
,
260 "Wait when deasserting legacy interrupts\n");
262 static int myri10ge_force_firmware
= 0;
263 module_param(myri10ge_force_firmware
, int, S_IRUGO
);
264 MODULE_PARM_DESC(myri10ge_force_firmware
,
265 "Force firmware to assume aligned completions\n");
267 static int myri10ge_initial_mtu
= MYRI10GE_MAX_ETHER_MTU
- ETH_HLEN
;
268 module_param(myri10ge_initial_mtu
, int, S_IRUGO
);
269 MODULE_PARM_DESC(myri10ge_initial_mtu
, "Initial MTU\n");
271 static int myri10ge_napi_weight
= 64;
272 module_param(myri10ge_napi_weight
, int, S_IRUGO
);
273 MODULE_PARM_DESC(myri10ge_napi_weight
, "Set NAPI weight\n");
275 static int myri10ge_watchdog_timeout
= 1;
276 module_param(myri10ge_watchdog_timeout
, int, S_IRUGO
);
277 MODULE_PARM_DESC(myri10ge_watchdog_timeout
, "Set watchdog timeout\n");
279 static int myri10ge_max_irq_loops
= 1048576;
280 module_param(myri10ge_max_irq_loops
, int, S_IRUGO
);
281 MODULE_PARM_DESC(myri10ge_max_irq_loops
,
282 "Set stuck legacy IRQ detection threshold\n");
284 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
286 static int myri10ge_debug
= -1; /* defaults above */
287 module_param(myri10ge_debug
, int, 0);
288 MODULE_PARM_DESC(myri10ge_debug
, "Debug level (0=none,...,16=all)");
290 static int myri10ge_lro
= 1;
291 module_param(myri10ge_lro
, int, S_IRUGO
);
292 MODULE_PARM_DESC(myri10ge_lro
, "Enable large receive offload\n");
294 static int myri10ge_lro_max_pkts
= MYRI10GE_LRO_MAX_PKTS
;
295 module_param(myri10ge_lro_max_pkts
, int, S_IRUGO
);
296 MODULE_PARM_DESC(myri10ge_lro
, "Number of LRO packets to be aggregated\n");
298 static int myri10ge_fill_thresh
= 256;
299 module_param(myri10ge_fill_thresh
, int, S_IRUGO
| S_IWUSR
);
300 MODULE_PARM_DESC(myri10ge_fill_thresh
, "Number of empty rx slots allowed\n");
302 static int myri10ge_reset_recover
= 1;
304 static int myri10ge_wcfifo
= 0;
305 module_param(myri10ge_wcfifo
, int, S_IRUGO
);
306 MODULE_PARM_DESC(myri10ge_wcfifo
, "Enable WC Fifo when WC is enabled\n");
308 #define MYRI10GE_FW_OFFSET 1024*1024
309 #define MYRI10GE_HIGHPART_TO_U32(X) \
310 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
311 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
313 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
315 static void myri10ge_set_multicast_list(struct net_device
*dev
);
316 static int myri10ge_sw_tso(struct sk_buff
*skb
, struct net_device
*dev
);
318 static inline void put_be32(__be32 val
, __be32 __iomem
* p
)
320 __raw_writel((__force __u32
) val
, (__force
void __iomem
*)p
);
324 myri10ge_send_cmd(struct myri10ge_priv
*mgp
, u32 cmd
,
325 struct myri10ge_cmd
*data
, int atomic
)
328 char buf_bytes
[sizeof(*buf
) + 8];
329 struct mcp_cmd_response
*response
= mgp
->cmd
;
330 char __iomem
*cmd_addr
= mgp
->sram
+ MXGEFW_ETH_CMD
;
331 u32 dma_low
, dma_high
, result
, value
;
334 /* ensure buf is aligned to 8 bytes */
335 buf
= (struct mcp_cmd
*)ALIGN((unsigned long)buf_bytes
, 8);
337 buf
->data0
= htonl(data
->data0
);
338 buf
->data1
= htonl(data
->data1
);
339 buf
->data2
= htonl(data
->data2
);
340 buf
->cmd
= htonl(cmd
);
341 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
342 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
344 buf
->response_addr
.low
= htonl(dma_low
);
345 buf
->response_addr
.high
= htonl(dma_high
);
346 response
->result
= htonl(MYRI10GE_NO_RESPONSE_RESULT
);
348 myri10ge_pio_copy(cmd_addr
, buf
, sizeof(*buf
));
350 /* wait up to 15ms. Longest command is the DMA benchmark,
351 * which is capped at 5ms, but runs from a timeout handler
352 * that runs every 7.8ms. So a 15ms timeout leaves us with
356 /* if atomic is set, do not sleep,
357 * and try to get the completion quickly
358 * (1ms will be enough for those commands) */
359 for (sleep_total
= 0;
361 && response
->result
== htonl(MYRI10GE_NO_RESPONSE_RESULT
);
365 /* use msleep for most command */
366 for (sleep_total
= 0;
368 && response
->result
== htonl(MYRI10GE_NO_RESPONSE_RESULT
);
373 result
= ntohl(response
->result
);
374 value
= ntohl(response
->data
);
375 if (result
!= MYRI10GE_NO_RESPONSE_RESULT
) {
379 } else if (result
== MXGEFW_CMD_UNKNOWN
) {
381 } else if (result
== MXGEFW_CMD_ERROR_UNALIGNED
) {
384 dev_err(&mgp
->pdev
->dev
,
385 "command %d failed, result = %d\n",
391 dev_err(&mgp
->pdev
->dev
, "command %d timed out, result = %d\n",
397 * The eeprom strings on the lanaiX have the format
400 * PT:ddd mmm xx xx:xx:xx xx\0
401 * PV:ddd mmm xx xx:xx:xx xx\0
403 static int myri10ge_read_mac_addr(struct myri10ge_priv
*mgp
)
408 ptr
= mgp
->eeprom_strings
;
409 limit
= mgp
->eeprom_strings
+ MYRI10GE_EEPROM_STRINGS_SIZE
;
411 while (*ptr
!= '\0' && ptr
< limit
) {
412 if (memcmp(ptr
, "MAC=", 4) == 0) {
414 mgp
->mac_addr_string
= ptr
;
415 for (i
= 0; i
< 6; i
++) {
416 if ((ptr
+ 2) > limit
)
419 simple_strtoul(ptr
, &ptr
, 16);
423 if (memcmp((const void *)ptr
, "SN=", 3) == 0) {
425 mgp
->serial_number
= simple_strtoul(ptr
, &ptr
, 10);
427 while (ptr
< limit
&& *ptr
++) ;
433 dev_err(&mgp
->pdev
->dev
, "failed to parse eeprom_strings\n");
438 * Enable or disable periodic RDMAs from the host to make certain
439 * chipsets resend dropped PCIe messages
442 static void myri10ge_dummy_rdma(struct myri10ge_priv
*mgp
, int enable
)
444 char __iomem
*submit
;
446 u32 dma_low
, dma_high
;
449 /* clear confirmation addr */
453 /* send a rdma command to the PCIe engine, and wait for the
454 * response in the confirmation address. The firmware should
455 * write a -1 there to indicate it is alive and well
457 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
458 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
460 buf
[0] = htonl(dma_high
); /* confirm addr MSW */
461 buf
[1] = htonl(dma_low
); /* confirm addr LSW */
462 buf
[2] = MYRI10GE_NO_CONFIRM_DATA
; /* confirm data */
463 buf
[3] = htonl(dma_high
); /* dummy addr MSW */
464 buf
[4] = htonl(dma_low
); /* dummy addr LSW */
465 buf
[5] = htonl(enable
); /* enable? */
467 submit
= mgp
->sram
+ MXGEFW_BOOT_DUMMY_RDMA
;
469 myri10ge_pio_copy(submit
, &buf
, sizeof(buf
));
470 for (i
= 0; mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
&& i
< 20; i
++)
472 if (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
)
473 dev_err(&mgp
->pdev
->dev
, "dummy rdma %s failed\n",
474 (enable
? "enable" : "disable"));
478 myri10ge_validate_firmware(struct myri10ge_priv
*mgp
,
479 struct mcp_gen_header
*hdr
)
481 struct device
*dev
= &mgp
->pdev
->dev
;
483 /* check firmware type */
484 if (ntohl(hdr
->mcp_type
) != MCP_TYPE_ETH
) {
485 dev_err(dev
, "Bad firmware type: 0x%x\n", ntohl(hdr
->mcp_type
));
489 /* save firmware version for ethtool */
490 strncpy(mgp
->fw_version
, hdr
->version
, sizeof(mgp
->fw_version
));
492 sscanf(mgp
->fw_version
, "%d.%d.%d", &mgp
->fw_ver_major
,
493 &mgp
->fw_ver_minor
, &mgp
->fw_ver_tiny
);
495 if (!(mgp
->fw_ver_major
== MXGEFW_VERSION_MAJOR
496 && mgp
->fw_ver_minor
== MXGEFW_VERSION_MINOR
)) {
497 dev_err(dev
, "Found firmware version %s\n", mgp
->fw_version
);
498 dev_err(dev
, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR
,
499 MXGEFW_VERSION_MINOR
);
505 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv
*mgp
, u32
* size
)
507 unsigned crc
, reread_crc
;
508 const struct firmware
*fw
;
509 struct device
*dev
= &mgp
->pdev
->dev
;
510 struct mcp_gen_header
*hdr
;
515 if ((status
= request_firmware(&fw
, mgp
->fw_name
, dev
)) < 0) {
516 dev_err(dev
, "Unable to load %s firmware image via hotplug\n",
519 goto abort_with_nothing
;
524 if (fw
->size
>= mgp
->sram_size
- MYRI10GE_FW_OFFSET
||
525 fw
->size
< MCP_HEADER_PTR_OFFSET
+ 4) {
526 dev_err(dev
, "Firmware size invalid:%d\n", (int)fw
->size
);
532 hdr_offset
= ntohl(*(__be32
*) (fw
->data
+ MCP_HEADER_PTR_OFFSET
));
533 if ((hdr_offset
& 3) || hdr_offset
+ sizeof(*hdr
) > fw
->size
) {
534 dev_err(dev
, "Bad firmware file\n");
538 hdr
= (void *)(fw
->data
+ hdr_offset
);
540 status
= myri10ge_validate_firmware(mgp
, hdr
);
544 crc
= crc32(~0, fw
->data
, fw
->size
);
545 for (i
= 0; i
< fw
->size
; i
+= 256) {
546 myri10ge_pio_copy(mgp
->sram
+ MYRI10GE_FW_OFFSET
+ i
,
548 min(256U, (unsigned)(fw
->size
- i
)));
552 /* corruption checking is good for parity recovery and buggy chipset */
553 memcpy_fromio(fw
->data
, mgp
->sram
+ MYRI10GE_FW_OFFSET
, fw
->size
);
554 reread_crc
= crc32(~0, fw
->data
, fw
->size
);
555 if (crc
!= reread_crc
) {
556 dev_err(dev
, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
557 (unsigned)fw
->size
, reread_crc
, crc
);
561 *size
= (u32
) fw
->size
;
564 release_firmware(fw
);
570 static int myri10ge_adopt_running_firmware(struct myri10ge_priv
*mgp
)
572 struct mcp_gen_header
*hdr
;
573 struct device
*dev
= &mgp
->pdev
->dev
;
574 const size_t bytes
= sizeof(struct mcp_gen_header
);
578 /* find running firmware header */
579 hdr_offset
= ntohl(__raw_readl(mgp
->sram
+ MCP_HEADER_PTR_OFFSET
));
581 if ((hdr_offset
& 3) || hdr_offset
+ sizeof(*hdr
) > mgp
->sram_size
) {
582 dev_err(dev
, "Running firmware has bad header offset (%d)\n",
587 /* copy header of running firmware from SRAM to host memory to
588 * validate firmware */
589 hdr
= kmalloc(bytes
, GFP_KERNEL
);
591 dev_err(dev
, "could not malloc firmware hdr\n");
594 memcpy_fromio(hdr
, mgp
->sram
+ hdr_offset
, bytes
);
595 status
= myri10ge_validate_firmware(mgp
, hdr
);
598 /* check to see if adopted firmware has bug where adopting
599 * it will cause broadcasts to be filtered unless the NIC
600 * is kept in ALLMULTI mode */
601 if (mgp
->fw_ver_major
== 1 && mgp
->fw_ver_minor
== 4 &&
602 mgp
->fw_ver_tiny
>= 4 && mgp
->fw_ver_tiny
<= 11) {
603 mgp
->adopted_rx_filter_bug
= 1;
604 dev_warn(dev
, "Adopting fw %d.%d.%d: "
605 "working around rx filter bug\n",
606 mgp
->fw_ver_major
, mgp
->fw_ver_minor
,
612 static int myri10ge_load_firmware(struct myri10ge_priv
*mgp
)
614 char __iomem
*submit
;
616 u32 dma_low
, dma_high
, size
;
618 struct myri10ge_cmd cmd
;
621 status
= myri10ge_load_hotplug_firmware(mgp
, &size
);
623 dev_warn(&mgp
->pdev
->dev
, "hotplug firmware loading failed\n");
625 /* Do not attempt to adopt firmware if there
630 status
= myri10ge_adopt_running_firmware(mgp
);
632 dev_err(&mgp
->pdev
->dev
,
633 "failed to adopt running firmware\n");
636 dev_info(&mgp
->pdev
->dev
,
637 "Successfully adopted running firmware\n");
638 if (mgp
->tx
.boundary
== 4096) {
639 dev_warn(&mgp
->pdev
->dev
,
640 "Using firmware currently running on NIC"
642 dev_warn(&mgp
->pdev
->dev
,
643 "performance consider loading optimized "
645 dev_warn(&mgp
->pdev
->dev
, "via hotplug\n");
648 mgp
->fw_name
= "adopted";
649 mgp
->tx
.boundary
= 2048;
653 /* clear confirmation addr */
657 /* send a reload command to the bootstrap MCP, and wait for the
658 * response in the confirmation address. The firmware should
659 * write a -1 there to indicate it is alive and well
661 dma_low
= MYRI10GE_LOWPART_TO_U32(mgp
->cmd_bus
);
662 dma_high
= MYRI10GE_HIGHPART_TO_U32(mgp
->cmd_bus
);
664 buf
[0] = htonl(dma_high
); /* confirm addr MSW */
665 buf
[1] = htonl(dma_low
); /* confirm addr LSW */
666 buf
[2] = MYRI10GE_NO_CONFIRM_DATA
; /* confirm data */
668 /* FIX: All newest firmware should un-protect the bottom of
669 * the sram before handoff. However, the very first interfaces
670 * do not. Therefore the handoff copy must skip the first 8 bytes
672 buf
[3] = htonl(MYRI10GE_FW_OFFSET
+ 8); /* where the code starts */
673 buf
[4] = htonl(size
- 8); /* length of code */
674 buf
[5] = htonl(8); /* where to copy to */
675 buf
[6] = htonl(0); /* where to jump to */
677 submit
= mgp
->sram
+ MXGEFW_BOOT_HANDOFF
;
679 myri10ge_pio_copy(submit
, &buf
, sizeof(buf
));
684 while (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
&& i
< 20) {
688 if (mgp
->cmd
->data
!= MYRI10GE_NO_CONFIRM_DATA
) {
689 dev_err(&mgp
->pdev
->dev
, "handoff failed\n");
692 dev_info(&mgp
->pdev
->dev
, "handoff confirmed\n");
693 myri10ge_dummy_rdma(mgp
, 1);
695 /* probe for IPv6 TSO support */
696 mgp
->features
= NETIF_F_SG
| NETIF_F_HW_CSUM
| NETIF_F_TSO
;
697 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE
,
700 mgp
->max_tso6
= cmd
.data0
;
701 mgp
->features
|= NETIF_F_TSO6
;
706 static int myri10ge_update_mac_address(struct myri10ge_priv
*mgp
, u8
* addr
)
708 struct myri10ge_cmd cmd
;
711 cmd
.data0
= ((addr
[0] << 24) | (addr
[1] << 16)
712 | (addr
[2] << 8) | addr
[3]);
714 cmd
.data1
= ((addr
[4] << 8) | (addr
[5]));
716 status
= myri10ge_send_cmd(mgp
, MXGEFW_SET_MAC_ADDRESS
, &cmd
, 0);
720 static int myri10ge_change_pause(struct myri10ge_priv
*mgp
, int pause
)
722 struct myri10ge_cmd cmd
;
725 ctl
= pause
? MXGEFW_ENABLE_FLOW_CONTROL
: MXGEFW_DISABLE_FLOW_CONTROL
;
726 status
= myri10ge_send_cmd(mgp
, ctl
, &cmd
, 0);
730 "myri10ge: %s: Failed to set flow control mode\n",
739 myri10ge_change_promisc(struct myri10ge_priv
*mgp
, int promisc
, int atomic
)
741 struct myri10ge_cmd cmd
;
744 ctl
= promisc
? MXGEFW_ENABLE_PROMISC
: MXGEFW_DISABLE_PROMISC
;
745 status
= myri10ge_send_cmd(mgp
, ctl
, &cmd
, atomic
);
747 printk(KERN_ERR
"myri10ge: %s: Failed to set promisc mode\n",
751 static int myri10ge_dma_test(struct myri10ge_priv
*mgp
, int test_type
)
753 struct myri10ge_cmd cmd
;
756 struct page
*dmatest_page
;
757 dma_addr_t dmatest_bus
;
760 dmatest_page
= alloc_page(GFP_KERNEL
);
763 dmatest_bus
= pci_map_page(mgp
->pdev
, dmatest_page
, 0, PAGE_SIZE
,
766 /* Run a small DMA test.
767 * The magic multipliers to the length tell the firmware
768 * to do DMA read, write, or read+write tests. The
769 * results are returned in cmd.data0. The upper 16
770 * bits or the return is the number of transfers completed.
771 * The lower 16 bits is the time in 0.5us ticks that the
772 * transfers took to complete.
775 len
= mgp
->tx
.boundary
;
777 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
778 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
779 cmd
.data2
= len
* 0x10000;
780 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
785 mgp
->read_dma
= ((cmd
.data0
>> 16) * len
* 2) / (cmd
.data0
& 0xffff);
786 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
787 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
788 cmd
.data2
= len
* 0x1;
789 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
794 mgp
->write_dma
= ((cmd
.data0
>> 16) * len
* 2) / (cmd
.data0
& 0xffff);
796 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(dmatest_bus
);
797 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(dmatest_bus
);
798 cmd
.data2
= len
* 0x10001;
799 status
= myri10ge_send_cmd(mgp
, test_type
, &cmd
, 0);
804 mgp
->read_write_dma
= ((cmd
.data0
>> 16) * len
* 2 * 2) /
805 (cmd
.data0
& 0xffff);
808 pci_unmap_page(mgp
->pdev
, dmatest_bus
, PAGE_SIZE
, DMA_BIDIRECTIONAL
);
809 put_page(dmatest_page
);
811 if (status
!= 0 && test_type
!= MXGEFW_CMD_UNALIGNED_TEST
)
812 dev_warn(&mgp
->pdev
->dev
, "DMA %s benchmark failed: %d\n",
818 static int myri10ge_reset(struct myri10ge_priv
*mgp
)
820 struct myri10ge_cmd cmd
;
824 /* try to send a reset command to the card to see if it
826 memset(&cmd
, 0, sizeof(cmd
));
827 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_RESET
, &cmd
, 0);
829 dev_err(&mgp
->pdev
->dev
, "failed reset\n");
833 (void)myri10ge_dma_test(mgp
, MXGEFW_DMA_TEST
);
835 /* Now exchange information about interrupts */
837 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
838 memset(mgp
->rx_done
.entry
, 0, bytes
);
839 cmd
.data0
= (u32
) bytes
;
840 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_SIZE
, &cmd
, 0);
841 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(mgp
->rx_done
.bus
);
842 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(mgp
->rx_done
.bus
);
843 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_INTRQ_DMA
, &cmd
, 0);
846 myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_IRQ_ACK_OFFSET
, &cmd
, 0);
847 mgp
->irq_claim
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
848 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET
,
850 mgp
->irq_deassert
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
852 status
|= myri10ge_send_cmd
853 (mgp
, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET
, &cmd
, 0);
854 mgp
->intr_coal_delay_ptr
= (__iomem __be32
*) (mgp
->sram
+ cmd
.data0
);
856 dev_err(&mgp
->pdev
->dev
, "failed set interrupt parameters\n");
859 put_be32(htonl(mgp
->intr_coal_delay
), mgp
->intr_coal_delay_ptr
);
861 memset(mgp
->rx_done
.entry
, 0, bytes
);
863 /* reset mcp/driver shared state back to 0 */
866 mgp
->tx
.pkt_start
= 0;
867 mgp
->tx
.pkt_done
= 0;
869 mgp
->rx_small
.cnt
= 0;
870 mgp
->rx_done
.idx
= 0;
871 mgp
->rx_done
.cnt
= 0;
872 mgp
->link_changes
= 0;
873 status
= myri10ge_update_mac_address(mgp
, mgp
->dev
->dev_addr
);
874 myri10ge_change_pause(mgp
, mgp
->pause
);
875 myri10ge_set_multicast_list(mgp
->dev
);
880 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem
* dst
,
881 struct mcp_kreq_ether_recv
*src
)
886 src
->addr_low
= htonl(DMA_32BIT_MASK
);
887 myri10ge_pio_copy(dst
, src
, 4 * sizeof(*src
));
889 myri10ge_pio_copy(dst
+ 4, src
+ 4, 4 * sizeof(*src
));
892 put_be32(low
, &dst
->addr_low
);
896 static inline void myri10ge_vlan_ip_csum(struct sk_buff
*skb
, __wsum hw_csum
)
898 struct vlan_hdr
*vh
= (struct vlan_hdr
*)(skb
->data
);
900 if ((skb
->protocol
== htons(ETH_P_8021Q
)) &&
901 (vh
->h_vlan_encapsulated_proto
== htons(ETH_P_IP
) ||
902 vh
->h_vlan_encapsulated_proto
== htons(ETH_P_IPV6
))) {
904 skb
->ip_summed
= CHECKSUM_COMPLETE
;
909 myri10ge_rx_skb_build(struct sk_buff
*skb
, u8
* va
,
910 struct skb_frag_struct
*rx_frags
, int len
, int hlen
)
912 struct skb_frag_struct
*skb_frags
;
914 skb
->len
= skb
->data_len
= len
;
915 skb
->truesize
= len
+ sizeof(struct sk_buff
);
916 /* attach the page(s) */
918 skb_frags
= skb_shinfo(skb
)->frags
;
920 memcpy(skb_frags
, rx_frags
, sizeof(*skb_frags
));
921 len
-= rx_frags
->size
;
924 skb_shinfo(skb
)->nr_frags
++;
927 /* pskb_may_pull is not available in irq context, but
928 * skb_pull() (for ether_pad and eth_type_trans()) requires
929 * the beginning of the packet in skb_headlen(), move it
931 skb_copy_to_linear_data(skb
, va
, hlen
);
932 skb_shinfo(skb
)->frags
[0].page_offset
+= hlen
;
933 skb_shinfo(skb
)->frags
[0].size
-= hlen
;
934 skb
->data_len
-= hlen
;
936 skb_pull(skb
, MXGEFW_PAD
);
940 myri10ge_alloc_rx_pages(struct myri10ge_priv
*mgp
, struct myri10ge_rx_buf
*rx
,
941 int bytes
, int watchdog
)
946 if (unlikely(rx
->watchdog_needed
&& !watchdog
))
949 /* try to refill entire ring */
950 while (rx
->fill_cnt
!= (rx
->cnt
+ rx
->mask
+ 1)) {
951 idx
= rx
->fill_cnt
& rx
->mask
;
952 if (rx
->page_offset
+ bytes
<= MYRI10GE_ALLOC_SIZE
) {
953 /* we can use part of previous page */
956 /* we need a new page */
958 alloc_pages(GFP_ATOMIC
| __GFP_COMP
,
959 MYRI10GE_ALLOC_ORDER
);
960 if (unlikely(page
== NULL
)) {
961 if (rx
->fill_cnt
- rx
->cnt
< 16)
962 rx
->watchdog_needed
= 1;
967 rx
->bus
= pci_map_page(mgp
->pdev
, page
, 0,
971 rx
->info
[idx
].page
= rx
->page
;
972 rx
->info
[idx
].page_offset
= rx
->page_offset
;
973 /* note that this is the address of the start of the
975 pci_unmap_addr_set(&rx
->info
[idx
], bus
, rx
->bus
);
976 rx
->shadow
[idx
].addr_low
=
977 htonl(MYRI10GE_LOWPART_TO_U32(rx
->bus
) + rx
->page_offset
);
978 rx
->shadow
[idx
].addr_high
=
979 htonl(MYRI10GE_HIGHPART_TO_U32(rx
->bus
));
981 /* start next packet on a cacheline boundary */
982 rx
->page_offset
+= SKB_DATA_ALIGN(bytes
);
984 #if MYRI10GE_ALLOC_SIZE > 4096
985 /* don't cross a 4KB boundary */
986 if ((rx
->page_offset
>> 12) !=
987 ((rx
->page_offset
+ bytes
- 1) >> 12))
988 rx
->page_offset
= (rx
->page_offset
+ 4096) & ~4095;
992 /* copy 8 descriptors to the firmware at a time */
993 if ((idx
& 7) == 7) {
994 if (rx
->wc_fifo
== NULL
)
995 myri10ge_submit_8rx(&rx
->lanai
[idx
- 7],
996 &rx
->shadow
[idx
- 7]);
999 myri10ge_pio_copy(rx
->wc_fifo
,
1000 &rx
->shadow
[idx
- 7], 64);
1007 myri10ge_unmap_rx_page(struct pci_dev
*pdev
,
1008 struct myri10ge_rx_buffer_state
*info
, int bytes
)
1010 /* unmap the recvd page if we're the only or last user of it */
1011 if (bytes
>= MYRI10GE_ALLOC_SIZE
/ 2 ||
1012 (info
->page_offset
+ 2 * bytes
) > MYRI10GE_ALLOC_SIZE
) {
1013 pci_unmap_page(pdev
, (pci_unmap_addr(info
, bus
)
1014 & ~(MYRI10GE_ALLOC_SIZE
- 1)),
1015 MYRI10GE_ALLOC_SIZE
, PCI_DMA_FROMDEVICE
);
1019 #define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
1020 * page into an skb */
1023 myri10ge_rx_done(struct myri10ge_priv
*mgp
, struct myri10ge_rx_buf
*rx
,
1024 int bytes
, int len
, __wsum csum
)
1026 struct sk_buff
*skb
;
1027 struct skb_frag_struct rx_frags
[MYRI10GE_MAX_FRAGS_PER_FRAME
];
1028 int i
, idx
, hlen
, remainder
;
1029 struct pci_dev
*pdev
= mgp
->pdev
;
1030 struct net_device
*dev
= mgp
->dev
;
1034 idx
= rx
->cnt
& rx
->mask
;
1035 va
= page_address(rx
->info
[idx
].page
) + rx
->info
[idx
].page_offset
;
1037 /* Fill skb_frag_struct(s) with data from our receive */
1038 for (i
= 0, remainder
= len
; remainder
> 0; i
++) {
1039 myri10ge_unmap_rx_page(pdev
, &rx
->info
[idx
], bytes
);
1040 rx_frags
[i
].page
= rx
->info
[idx
].page
;
1041 rx_frags
[i
].page_offset
= rx
->info
[idx
].page_offset
;
1042 if (remainder
< MYRI10GE_ALLOC_SIZE
)
1043 rx_frags
[i
].size
= remainder
;
1045 rx_frags
[i
].size
= MYRI10GE_ALLOC_SIZE
;
1047 idx
= rx
->cnt
& rx
->mask
;
1048 remainder
-= MYRI10GE_ALLOC_SIZE
;
1051 if (mgp
->csum_flag
&& myri10ge_lro
) {
1052 rx_frags
[0].page_offset
+= MXGEFW_PAD
;
1053 rx_frags
[0].size
-= MXGEFW_PAD
;
1055 lro_receive_frags(&mgp
->rx_done
.lro_mgr
, rx_frags
,
1056 len
, len
, (void *)(unsigned long)csum
, csum
);
1060 hlen
= MYRI10GE_HLEN
> len
? len
: MYRI10GE_HLEN
;
1062 /* allocate an skb to attach the page(s) to. This is done
1063 * after trying LRO, so as to avoid skb allocation overheads */
1065 skb
= netdev_alloc_skb(dev
, MYRI10GE_HLEN
+ 16);
1066 if (unlikely(skb
== NULL
)) {
1067 mgp
->stats
.rx_dropped
++;
1070 put_page(rx_frags
[i
].page
);
1075 /* Attach the pages to the skb, and trim off any padding */
1076 myri10ge_rx_skb_build(skb
, va
, rx_frags
, len
, hlen
);
1077 if (skb_shinfo(skb
)->frags
[0].size
<= 0) {
1078 put_page(skb_shinfo(skb
)->frags
[0].page
);
1079 skb_shinfo(skb
)->nr_frags
= 0;
1081 skb
->protocol
= eth_type_trans(skb
, dev
);
1083 if (mgp
->csum_flag
) {
1084 if ((skb
->protocol
== htons(ETH_P_IP
)) ||
1085 (skb
->protocol
== htons(ETH_P_IPV6
))) {
1087 skb
->ip_summed
= CHECKSUM_COMPLETE
;
1089 myri10ge_vlan_ip_csum(skb
, csum
);
1091 netif_receive_skb(skb
);
1092 dev
->last_rx
= jiffies
;
1096 static inline void myri10ge_tx_done(struct myri10ge_priv
*mgp
, int mcp_index
)
1098 struct pci_dev
*pdev
= mgp
->pdev
;
1099 struct myri10ge_tx_buf
*tx
= &mgp
->tx
;
1100 struct sk_buff
*skb
;
1103 while (tx
->pkt_done
!= mcp_index
) {
1104 idx
= tx
->done
& tx
->mask
;
1105 skb
= tx
->info
[idx
].skb
;
1108 tx
->info
[idx
].skb
= NULL
;
1109 if (tx
->info
[idx
].last
) {
1111 tx
->info
[idx
].last
= 0;
1114 len
= pci_unmap_len(&tx
->info
[idx
], len
);
1115 pci_unmap_len_set(&tx
->info
[idx
], len
, 0);
1117 mgp
->stats
.tx_bytes
+= skb
->len
;
1118 mgp
->stats
.tx_packets
++;
1119 dev_kfree_skb_irq(skb
);
1121 pci_unmap_single(pdev
,
1122 pci_unmap_addr(&tx
->info
[idx
],
1127 pci_unmap_page(pdev
,
1128 pci_unmap_addr(&tx
->info
[idx
],
1133 /* start the queue if we've stopped it */
1134 if (netif_queue_stopped(mgp
->dev
)
1135 && tx
->req
- tx
->done
< (tx
->mask
>> 1)) {
1137 netif_wake_queue(mgp
->dev
);
1141 static inline int myri10ge_clean_rx_done(struct myri10ge_priv
*mgp
, int budget
)
1143 struct myri10ge_rx_done
*rx_done
= &mgp
->rx_done
;
1144 unsigned long rx_bytes
= 0;
1145 unsigned long rx_packets
= 0;
1146 unsigned long rx_ok
;
1148 int idx
= rx_done
->idx
;
1149 int cnt
= rx_done
->cnt
;
1154 while (rx_done
->entry
[idx
].length
!= 0 && work_done
< budget
) {
1155 length
= ntohs(rx_done
->entry
[idx
].length
);
1156 rx_done
->entry
[idx
].length
= 0;
1157 checksum
= csum_unfold(rx_done
->entry
[idx
].checksum
);
1158 if (length
<= mgp
->small_bytes
)
1159 rx_ok
= myri10ge_rx_done(mgp
, &mgp
->rx_small
,
1163 rx_ok
= myri10ge_rx_done(mgp
, &mgp
->rx_big
,
1166 rx_packets
+= rx_ok
;
1167 rx_bytes
+= rx_ok
* (unsigned long)length
;
1169 idx
= cnt
& (myri10ge_max_intr_slots
- 1);
1174 mgp
->stats
.rx_packets
+= rx_packets
;
1175 mgp
->stats
.rx_bytes
+= rx_bytes
;
1178 lro_flush_all(&rx_done
->lro_mgr
);
1180 /* restock receive rings if needed */
1181 if (mgp
->rx_small
.fill_cnt
- mgp
->rx_small
.cnt
< myri10ge_fill_thresh
)
1182 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_small
,
1183 mgp
->small_bytes
+ MXGEFW_PAD
, 0);
1184 if (mgp
->rx_big
.fill_cnt
- mgp
->rx_big
.cnt
< myri10ge_fill_thresh
)
1185 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_big
, mgp
->big_bytes
, 0);
1190 static inline void myri10ge_check_statblock(struct myri10ge_priv
*mgp
)
1192 struct mcp_irq_data
*stats
= mgp
->fw_stats
;
1194 if (unlikely(stats
->stats_updated
)) {
1195 unsigned link_up
= ntohl(stats
->link_up
);
1196 if (mgp
->link_state
!= link_up
) {
1197 mgp
->link_state
= link_up
;
1199 if (mgp
->link_state
== MXGEFW_LINK_UP
) {
1200 if (netif_msg_link(mgp
))
1202 "myri10ge: %s: link up\n",
1204 netif_carrier_on(mgp
->dev
);
1205 mgp
->link_changes
++;
1207 if (netif_msg_link(mgp
))
1209 "myri10ge: %s: link %s\n",
1211 (link_up
== MXGEFW_LINK_MYRINET
?
1212 "mismatch (Myrinet detected)" :
1214 netif_carrier_off(mgp
->dev
);
1215 mgp
->link_changes
++;
1218 if (mgp
->rdma_tags_available
!=
1219 ntohl(mgp
->fw_stats
->rdma_tags_available
)) {
1220 mgp
->rdma_tags_available
=
1221 ntohl(mgp
->fw_stats
->rdma_tags_available
);
1222 printk(KERN_WARNING
"myri10ge: %s: RDMA timed out! "
1223 "%d tags left\n", mgp
->dev
->name
,
1224 mgp
->rdma_tags_available
);
1226 mgp
->down_cnt
+= stats
->link_down
;
1227 if (stats
->link_down
)
1228 wake_up(&mgp
->down_wq
);
1232 static int myri10ge_poll(struct napi_struct
*napi
, int budget
)
1234 struct myri10ge_priv
*mgp
=
1235 container_of(napi
, struct myri10ge_priv
, napi
);
1236 struct net_device
*netdev
= mgp
->dev
;
1239 /* process as many rx events as NAPI will allow */
1240 work_done
= myri10ge_clean_rx_done(mgp
, budget
);
1242 if (work_done
< budget
) {
1243 netif_rx_complete(netdev
, napi
);
1244 put_be32(htonl(3), mgp
->irq_claim
);
1249 static irqreturn_t
myri10ge_intr(int irq
, void *arg
)
1251 struct myri10ge_priv
*mgp
= arg
;
1252 struct mcp_irq_data
*stats
= mgp
->fw_stats
;
1253 struct myri10ge_tx_buf
*tx
= &mgp
->tx
;
1254 u32 send_done_count
;
1257 /* make sure it is our IRQ, and that the DMA has finished */
1258 if (unlikely(!stats
->valid
))
1261 /* low bit indicates receives are present, so schedule
1262 * napi poll handler */
1263 if (stats
->valid
& 1)
1264 netif_rx_schedule(mgp
->dev
, &mgp
->napi
);
1266 if (!mgp
->msi_enabled
) {
1267 put_be32(0, mgp
->irq_deassert
);
1268 if (!myri10ge_deassert_wait
)
1274 /* Wait for IRQ line to go low, if using INTx */
1278 /* check for transmit completes and receives */
1279 send_done_count
= ntohl(stats
->send_done_count
);
1280 if (send_done_count
!= tx
->pkt_done
)
1281 myri10ge_tx_done(mgp
, (int)send_done_count
);
1282 if (unlikely(i
> myri10ge_max_irq_loops
)) {
1283 printk(KERN_WARNING
"myri10ge: %s: irq stuck?\n",
1286 schedule_work(&mgp
->watchdog_work
);
1288 if (likely(stats
->valid
== 0))
1294 myri10ge_check_statblock(mgp
);
1296 put_be32(htonl(3), mgp
->irq_claim
+ 1);
1297 return (IRQ_HANDLED
);
1301 myri10ge_get_settings(struct net_device
*netdev
, struct ethtool_cmd
*cmd
)
1303 cmd
->autoneg
= AUTONEG_DISABLE
;
1304 cmd
->speed
= SPEED_10000
;
1305 cmd
->duplex
= DUPLEX_FULL
;
1310 myri10ge_get_drvinfo(struct net_device
*netdev
, struct ethtool_drvinfo
*info
)
1312 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1314 strlcpy(info
->driver
, "myri10ge", sizeof(info
->driver
));
1315 strlcpy(info
->version
, MYRI10GE_VERSION_STR
, sizeof(info
->version
));
1316 strlcpy(info
->fw_version
, mgp
->fw_version
, sizeof(info
->fw_version
));
1317 strlcpy(info
->bus_info
, pci_name(mgp
->pdev
), sizeof(info
->bus_info
));
1321 myri10ge_get_coalesce(struct net_device
*netdev
, struct ethtool_coalesce
*coal
)
1323 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1324 coal
->rx_coalesce_usecs
= mgp
->intr_coal_delay
;
1329 myri10ge_set_coalesce(struct net_device
*netdev
, struct ethtool_coalesce
*coal
)
1331 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1333 mgp
->intr_coal_delay
= coal
->rx_coalesce_usecs
;
1334 put_be32(htonl(mgp
->intr_coal_delay
), mgp
->intr_coal_delay_ptr
);
1339 myri10ge_get_pauseparam(struct net_device
*netdev
,
1340 struct ethtool_pauseparam
*pause
)
1342 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1345 pause
->rx_pause
= mgp
->pause
;
1346 pause
->tx_pause
= mgp
->pause
;
1350 myri10ge_set_pauseparam(struct net_device
*netdev
,
1351 struct ethtool_pauseparam
*pause
)
1353 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1355 if (pause
->tx_pause
!= mgp
->pause
)
1356 return myri10ge_change_pause(mgp
, pause
->tx_pause
);
1357 if (pause
->rx_pause
!= mgp
->pause
)
1358 return myri10ge_change_pause(mgp
, pause
->tx_pause
);
1359 if (pause
->autoneg
!= 0)
1365 myri10ge_get_ringparam(struct net_device
*netdev
,
1366 struct ethtool_ringparam
*ring
)
1368 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1370 ring
->rx_mini_max_pending
= mgp
->rx_small
.mask
+ 1;
1371 ring
->rx_max_pending
= mgp
->rx_big
.mask
+ 1;
1372 ring
->rx_jumbo_max_pending
= 0;
1373 ring
->tx_max_pending
= mgp
->rx_small
.mask
+ 1;
1374 ring
->rx_mini_pending
= ring
->rx_mini_max_pending
;
1375 ring
->rx_pending
= ring
->rx_max_pending
;
1376 ring
->rx_jumbo_pending
= ring
->rx_jumbo_max_pending
;
1377 ring
->tx_pending
= ring
->tx_max_pending
;
1380 static u32
myri10ge_get_rx_csum(struct net_device
*netdev
)
1382 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1389 static int myri10ge_set_rx_csum(struct net_device
*netdev
, u32 csum_enabled
)
1391 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1393 mgp
->csum_flag
= MXGEFW_FLAGS_CKSUM
;
1399 static int myri10ge_set_tso(struct net_device
*netdev
, u32 tso_enabled
)
1401 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1402 unsigned long flags
= mgp
->features
& (NETIF_F_TSO6
| NETIF_F_TSO
);
1405 netdev
->features
|= flags
;
1407 netdev
->features
&= ~flags
;
1411 static const char myri10ge_gstrings_stats
[][ETH_GSTRING_LEN
] = {
1412 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1413 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1414 "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1415 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1416 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1417 "tx_heartbeat_errors", "tx_window_errors",
1418 /* device-specific stats */
1419 "tx_boundary", "WC", "irq", "MSI",
1420 "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1421 "serial_number", "tx_pkt_start", "tx_pkt_done",
1422 "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
1423 "wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
1424 "link_changes", "link_up", "dropped_link_overflow",
1425 "dropped_link_error_or_filtered",
1426 "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1427 "dropped_unicast_filtered", "dropped_multicast_filtered",
1428 "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1429 "dropped_no_big_buffer", "LRO aggregated", "LRO flushed",
1430 "LRO avg aggr", "LRO no_desc"
1433 #define MYRI10GE_NET_STATS_LEN 21
1434 #define MYRI10GE_STATS_LEN sizeof(myri10ge_gstrings_stats) / ETH_GSTRING_LEN
1437 myri10ge_get_strings(struct net_device
*netdev
, u32 stringset
, u8
* data
)
1439 switch (stringset
) {
1441 memcpy(data
, *myri10ge_gstrings_stats
,
1442 sizeof(myri10ge_gstrings_stats
));
1447 static int myri10ge_get_sset_count(struct net_device
*netdev
, int sset
)
1451 return MYRI10GE_STATS_LEN
;
1458 myri10ge_get_ethtool_stats(struct net_device
*netdev
,
1459 struct ethtool_stats
*stats
, u64
* data
)
1461 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1464 for (i
= 0; i
< MYRI10GE_NET_STATS_LEN
; i
++)
1465 data
[i
] = ((unsigned long *)&mgp
->stats
)[i
];
1467 data
[i
++] = (unsigned int)mgp
->tx
.boundary
;
1468 data
[i
++] = (unsigned int)mgp
->wc_enabled
;
1469 data
[i
++] = (unsigned int)mgp
->pdev
->irq
;
1470 data
[i
++] = (unsigned int)mgp
->msi_enabled
;
1471 data
[i
++] = (unsigned int)mgp
->read_dma
;
1472 data
[i
++] = (unsigned int)mgp
->write_dma
;
1473 data
[i
++] = (unsigned int)mgp
->read_write_dma
;
1474 data
[i
++] = (unsigned int)mgp
->serial_number
;
1475 data
[i
++] = (unsigned int)mgp
->tx
.pkt_start
;
1476 data
[i
++] = (unsigned int)mgp
->tx
.pkt_done
;
1477 data
[i
++] = (unsigned int)mgp
->tx
.req
;
1478 data
[i
++] = (unsigned int)mgp
->tx
.done
;
1479 data
[i
++] = (unsigned int)mgp
->rx_small
.cnt
;
1480 data
[i
++] = (unsigned int)mgp
->rx_big
.cnt
;
1481 data
[i
++] = (unsigned int)mgp
->wake_queue
;
1482 data
[i
++] = (unsigned int)mgp
->stop_queue
;
1483 data
[i
++] = (unsigned int)mgp
->watchdog_resets
;
1484 data
[i
++] = (unsigned int)mgp
->tx_linearized
;
1485 data
[i
++] = (unsigned int)mgp
->link_changes
;
1486 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->link_up
);
1487 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_link_overflow
);
1489 (unsigned int)ntohl(mgp
->fw_stats
->dropped_link_error_or_filtered
);
1490 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_pause
);
1491 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_bad_phy
);
1492 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_bad_crc32
);
1494 (unsigned int)ntohl(mgp
->fw_stats
->dropped_unicast_filtered
);
1496 (unsigned int)ntohl(mgp
->fw_stats
->dropped_multicast_filtered
);
1497 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_runt
);
1498 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_overrun
);
1499 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_no_small_buffer
);
1500 data
[i
++] = (unsigned int)ntohl(mgp
->fw_stats
->dropped_no_big_buffer
);
1501 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.aggregated
;
1502 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.flushed
;
1503 if (mgp
->rx_done
.lro_mgr
.stats
.flushed
)
1504 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.aggregated
/
1505 mgp
->rx_done
.lro_mgr
.stats
.flushed
;
1508 data
[i
++] = mgp
->rx_done
.lro_mgr
.stats
.no_desc
;
1511 static void myri10ge_set_msglevel(struct net_device
*netdev
, u32 value
)
1513 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1514 mgp
->msg_enable
= value
;
1517 static u32
myri10ge_get_msglevel(struct net_device
*netdev
)
1519 struct myri10ge_priv
*mgp
= netdev_priv(netdev
);
1520 return mgp
->msg_enable
;
1523 static const struct ethtool_ops myri10ge_ethtool_ops
= {
1524 .get_settings
= myri10ge_get_settings
,
1525 .get_drvinfo
= myri10ge_get_drvinfo
,
1526 .get_coalesce
= myri10ge_get_coalesce
,
1527 .set_coalesce
= myri10ge_set_coalesce
,
1528 .get_pauseparam
= myri10ge_get_pauseparam
,
1529 .set_pauseparam
= myri10ge_set_pauseparam
,
1530 .get_ringparam
= myri10ge_get_ringparam
,
1531 .get_rx_csum
= myri10ge_get_rx_csum
,
1532 .set_rx_csum
= myri10ge_set_rx_csum
,
1533 .set_tx_csum
= ethtool_op_set_tx_hw_csum
,
1534 .set_sg
= ethtool_op_set_sg
,
1535 .set_tso
= myri10ge_set_tso
,
1536 .get_link
= ethtool_op_get_link
,
1537 .get_strings
= myri10ge_get_strings
,
1538 .get_sset_count
= myri10ge_get_sset_count
,
1539 .get_ethtool_stats
= myri10ge_get_ethtool_stats
,
1540 .set_msglevel
= myri10ge_set_msglevel
,
1541 .get_msglevel
= myri10ge_get_msglevel
1544 static int myri10ge_allocate_rings(struct net_device
*dev
)
1546 struct myri10ge_priv
*mgp
;
1547 struct myri10ge_cmd cmd
;
1548 int tx_ring_size
, rx_ring_size
;
1549 int tx_ring_entries
, rx_ring_entries
;
1553 mgp
= netdev_priv(dev
);
1555 /* get ring sizes */
1557 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SEND_RING_SIZE
, &cmd
, 0);
1558 tx_ring_size
= cmd
.data0
;
1559 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_RX_RING_SIZE
, &cmd
, 0);
1562 rx_ring_size
= cmd
.data0
;
1564 tx_ring_entries
= tx_ring_size
/ sizeof(struct mcp_kreq_ether_send
);
1565 rx_ring_entries
= rx_ring_size
/ sizeof(struct mcp_dma_addr
);
1566 mgp
->tx
.mask
= tx_ring_entries
- 1;
1567 mgp
->rx_small
.mask
= mgp
->rx_big
.mask
= rx_ring_entries
- 1;
1571 /* allocate the host shadow rings */
1573 bytes
= 8 + (MYRI10GE_MAX_SEND_DESC_TSO
+ 4)
1574 * sizeof(*mgp
->tx
.req_list
);
1575 mgp
->tx
.req_bytes
= kzalloc(bytes
, GFP_KERNEL
);
1576 if (mgp
->tx
.req_bytes
== NULL
)
1577 goto abort_with_nothing
;
1579 /* ensure req_list entries are aligned to 8 bytes */
1580 mgp
->tx
.req_list
= (struct mcp_kreq_ether_send
*)
1581 ALIGN((unsigned long)mgp
->tx
.req_bytes
, 8);
1583 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_small
.shadow
);
1584 mgp
->rx_small
.shadow
= kzalloc(bytes
, GFP_KERNEL
);
1585 if (mgp
->rx_small
.shadow
== NULL
)
1586 goto abort_with_tx_req_bytes
;
1588 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_big
.shadow
);
1589 mgp
->rx_big
.shadow
= kzalloc(bytes
, GFP_KERNEL
);
1590 if (mgp
->rx_big
.shadow
== NULL
)
1591 goto abort_with_rx_small_shadow
;
1593 /* allocate the host info rings */
1595 bytes
= tx_ring_entries
* sizeof(*mgp
->tx
.info
);
1596 mgp
->tx
.info
= kzalloc(bytes
, GFP_KERNEL
);
1597 if (mgp
->tx
.info
== NULL
)
1598 goto abort_with_rx_big_shadow
;
1600 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_small
.info
);
1601 mgp
->rx_small
.info
= kzalloc(bytes
, GFP_KERNEL
);
1602 if (mgp
->rx_small
.info
== NULL
)
1603 goto abort_with_tx_info
;
1605 bytes
= rx_ring_entries
* sizeof(*mgp
->rx_big
.info
);
1606 mgp
->rx_big
.info
= kzalloc(bytes
, GFP_KERNEL
);
1607 if (mgp
->rx_big
.info
== NULL
)
1608 goto abort_with_rx_small_info
;
1610 /* Fill the receive rings */
1611 mgp
->rx_big
.cnt
= 0;
1612 mgp
->rx_small
.cnt
= 0;
1613 mgp
->rx_big
.fill_cnt
= 0;
1614 mgp
->rx_small
.fill_cnt
= 0;
1615 mgp
->rx_small
.page_offset
= MYRI10GE_ALLOC_SIZE
;
1616 mgp
->rx_big
.page_offset
= MYRI10GE_ALLOC_SIZE
;
1617 mgp
->rx_small
.watchdog_needed
= 0;
1618 mgp
->rx_big
.watchdog_needed
= 0;
1619 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_small
,
1620 mgp
->small_bytes
+ MXGEFW_PAD
, 0);
1622 if (mgp
->rx_small
.fill_cnt
< mgp
->rx_small
.mask
+ 1) {
1623 printk(KERN_ERR
"myri10ge: %s: alloced only %d small bufs\n",
1624 dev
->name
, mgp
->rx_small
.fill_cnt
);
1625 goto abort_with_rx_small_ring
;
1628 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_big
, mgp
->big_bytes
, 0);
1629 if (mgp
->rx_big
.fill_cnt
< mgp
->rx_big
.mask
+ 1) {
1630 printk(KERN_ERR
"myri10ge: %s: alloced only %d big bufs\n",
1631 dev
->name
, mgp
->rx_big
.fill_cnt
);
1632 goto abort_with_rx_big_ring
;
1637 abort_with_rx_big_ring
:
1638 for (i
= mgp
->rx_big
.cnt
; i
< mgp
->rx_big
.fill_cnt
; i
++) {
1639 int idx
= i
& mgp
->rx_big
.mask
;
1640 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_big
.info
[idx
],
1642 put_page(mgp
->rx_big
.info
[idx
].page
);
1645 abort_with_rx_small_ring
:
1646 for (i
= mgp
->rx_small
.cnt
; i
< mgp
->rx_small
.fill_cnt
; i
++) {
1647 int idx
= i
& mgp
->rx_small
.mask
;
1648 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_small
.info
[idx
],
1649 mgp
->small_bytes
+ MXGEFW_PAD
);
1650 put_page(mgp
->rx_small
.info
[idx
].page
);
1653 kfree(mgp
->rx_big
.info
);
1655 abort_with_rx_small_info
:
1656 kfree(mgp
->rx_small
.info
);
1659 kfree(mgp
->tx
.info
);
1661 abort_with_rx_big_shadow
:
1662 kfree(mgp
->rx_big
.shadow
);
1664 abort_with_rx_small_shadow
:
1665 kfree(mgp
->rx_small
.shadow
);
1667 abort_with_tx_req_bytes
:
1668 kfree(mgp
->tx
.req_bytes
);
1669 mgp
->tx
.req_bytes
= NULL
;
1670 mgp
->tx
.req_list
= NULL
;
1676 static void myri10ge_free_rings(struct net_device
*dev
)
1678 struct myri10ge_priv
*mgp
;
1679 struct sk_buff
*skb
;
1680 struct myri10ge_tx_buf
*tx
;
1683 mgp
= netdev_priv(dev
);
1685 for (i
= mgp
->rx_big
.cnt
; i
< mgp
->rx_big
.fill_cnt
; i
++) {
1686 idx
= i
& mgp
->rx_big
.mask
;
1687 if (i
== mgp
->rx_big
.fill_cnt
- 1)
1688 mgp
->rx_big
.info
[idx
].page_offset
= MYRI10GE_ALLOC_SIZE
;
1689 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_big
.info
[idx
],
1691 put_page(mgp
->rx_big
.info
[idx
].page
);
1694 for (i
= mgp
->rx_small
.cnt
; i
< mgp
->rx_small
.fill_cnt
; i
++) {
1695 idx
= i
& mgp
->rx_small
.mask
;
1696 if (i
== mgp
->rx_small
.fill_cnt
- 1)
1697 mgp
->rx_small
.info
[idx
].page_offset
=
1698 MYRI10GE_ALLOC_SIZE
;
1699 myri10ge_unmap_rx_page(mgp
->pdev
, &mgp
->rx_small
.info
[idx
],
1700 mgp
->small_bytes
+ MXGEFW_PAD
);
1701 put_page(mgp
->rx_small
.info
[idx
].page
);
1704 while (tx
->done
!= tx
->req
) {
1705 idx
= tx
->done
& tx
->mask
;
1706 skb
= tx
->info
[idx
].skb
;
1709 tx
->info
[idx
].skb
= NULL
;
1711 len
= pci_unmap_len(&tx
->info
[idx
], len
);
1712 pci_unmap_len_set(&tx
->info
[idx
], len
, 0);
1714 mgp
->stats
.tx_dropped
++;
1715 dev_kfree_skb_any(skb
);
1717 pci_unmap_single(mgp
->pdev
,
1718 pci_unmap_addr(&tx
->info
[idx
],
1723 pci_unmap_page(mgp
->pdev
,
1724 pci_unmap_addr(&tx
->info
[idx
],
1729 kfree(mgp
->rx_big
.info
);
1731 kfree(mgp
->rx_small
.info
);
1733 kfree(mgp
->tx
.info
);
1735 kfree(mgp
->rx_big
.shadow
);
1737 kfree(mgp
->rx_small
.shadow
);
1739 kfree(mgp
->tx
.req_bytes
);
1740 mgp
->tx
.req_bytes
= NULL
;
1741 mgp
->tx
.req_list
= NULL
;
1744 static int myri10ge_request_irq(struct myri10ge_priv
*mgp
)
1746 struct pci_dev
*pdev
= mgp
->pdev
;
1750 status
= pci_enable_msi(pdev
);
1753 "Error %d setting up MSI; falling back to xPIC\n",
1756 mgp
->msi_enabled
= 1;
1758 mgp
->msi_enabled
= 0;
1760 status
= request_irq(pdev
->irq
, myri10ge_intr
, IRQF_SHARED
,
1761 mgp
->dev
->name
, mgp
);
1763 dev_err(&pdev
->dev
, "failed to allocate IRQ\n");
1764 if (mgp
->msi_enabled
)
1765 pci_disable_msi(pdev
);
1770 static void myri10ge_free_irq(struct myri10ge_priv
*mgp
)
1772 struct pci_dev
*pdev
= mgp
->pdev
;
1774 free_irq(pdev
->irq
, mgp
);
1775 if (mgp
->msi_enabled
)
1776 pci_disable_msi(pdev
);
1780 myri10ge_get_frag_header(struct skb_frag_struct
*frag
, void **mac_hdr
,
1781 void **ip_hdr
, void **tcpudp_hdr
,
1782 u64
* hdr_flags
, void *priv
)
1785 struct vlan_ethhdr
*veh
;
1787 u8
*va
= page_address(frag
->page
) + frag
->page_offset
;
1788 unsigned long ll_hlen
;
1789 __wsum csum
= (__wsum
) (unsigned long)priv
;
1791 /* find the mac header, aborting if not IPv4 */
1793 eh
= (struct ethhdr
*)va
;
1796 if (eh
->h_proto
!= htons(ETH_P_IP
)) {
1797 if (eh
->h_proto
== htons(ETH_P_8021Q
)) {
1798 veh
= (struct vlan_ethhdr
*)va
;
1799 if (veh
->h_vlan_encapsulated_proto
!= htons(ETH_P_IP
))
1802 ll_hlen
+= VLAN_HLEN
;
1805 * HW checksum starts ETH_HLEN bytes into
1806 * frame, so we must subtract off the VLAN
1807 * header's checksum before csum can be used
1809 csum
= csum_sub(csum
, csum_partial(va
+ ETH_HLEN
,
1815 *hdr_flags
= LRO_IPV4
;
1817 iph
= (struct iphdr
*)(va
+ ll_hlen
);
1819 if (iph
->protocol
!= IPPROTO_TCP
)
1821 *hdr_flags
|= LRO_TCP
;
1822 *tcpudp_hdr
= (u8
*) (*ip_hdr
) + (iph
->ihl
<< 2);
1824 /* verify the IP checksum */
1825 if (unlikely(ip_fast_csum((u8
*) iph
, iph
->ihl
)))
1828 /* verify the checksum */
1829 if (unlikely(csum_tcpudp_magic(iph
->saddr
, iph
->daddr
,
1830 ntohs(iph
->tot_len
) - (iph
->ihl
<< 2),
1831 IPPROTO_TCP
, csum
)))
1837 static int myri10ge_open(struct net_device
*dev
)
1839 struct myri10ge_priv
*mgp
;
1840 struct myri10ge_cmd cmd
;
1841 struct net_lro_mgr
*lro_mgr
;
1842 int status
, big_pow2
;
1844 mgp
= netdev_priv(dev
);
1846 if (mgp
->running
!= MYRI10GE_ETH_STOPPED
)
1849 mgp
->running
= MYRI10GE_ETH_STARTING
;
1850 status
= myri10ge_reset(mgp
);
1852 printk(KERN_ERR
"myri10ge: %s: failed reset\n", dev
->name
);
1853 goto abort_with_nothing
;
1856 status
= myri10ge_request_irq(mgp
);
1858 goto abort_with_nothing
;
1860 /* decide what small buffer size to use. For good TCP rx
1861 * performance, it is important to not receive 1514 byte
1862 * frames into jumbo buffers, as it confuses the socket buffer
1863 * accounting code, leading to drops and erratic performance.
1866 if (dev
->mtu
<= ETH_DATA_LEN
)
1867 /* enough for a TCP header */
1868 mgp
->small_bytes
= (128 > SMP_CACHE_BYTES
)
1869 ? (128 - MXGEFW_PAD
)
1870 : (SMP_CACHE_BYTES
- MXGEFW_PAD
);
1872 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
1873 mgp
->small_bytes
= VLAN_ETH_FRAME_LEN
;
1875 /* Override the small buffer size? */
1876 if (myri10ge_small_bytes
> 0)
1877 mgp
->small_bytes
= myri10ge_small_bytes
;
1879 /* get the lanai pointers to the send and receive rings */
1881 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SEND_OFFSET
, &cmd
, 0);
1883 (struct mcp_kreq_ether_send __iomem
*)(mgp
->sram
+ cmd
.data0
);
1886 myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_SMALL_RX_OFFSET
, &cmd
, 0);
1887 mgp
->rx_small
.lanai
=
1888 (struct mcp_kreq_ether_recv __iomem
*)(mgp
->sram
+ cmd
.data0
);
1890 status
|= myri10ge_send_cmd(mgp
, MXGEFW_CMD_GET_BIG_RX_OFFSET
, &cmd
, 0);
1892 (struct mcp_kreq_ether_recv __iomem
*)(mgp
->sram
+ cmd
.data0
);
1896 "myri10ge: %s: failed to get ring sizes or locations\n",
1898 mgp
->running
= MYRI10GE_ETH_STOPPED
;
1899 goto abort_with_irq
;
1902 if (myri10ge_wcfifo
&& mgp
->wc_enabled
) {
1903 mgp
->tx
.wc_fifo
= (u8 __iomem
*) mgp
->sram
+ MXGEFW_ETH_SEND_4
;
1904 mgp
->rx_small
.wc_fifo
=
1905 (u8 __iomem
*) mgp
->sram
+ MXGEFW_ETH_RECV_SMALL
;
1906 mgp
->rx_big
.wc_fifo
=
1907 (u8 __iomem
*) mgp
->sram
+ MXGEFW_ETH_RECV_BIG
;
1909 mgp
->tx
.wc_fifo
= NULL
;
1910 mgp
->rx_small
.wc_fifo
= NULL
;
1911 mgp
->rx_big
.wc_fifo
= NULL
;
1914 /* Firmware needs the big buff size as a power of 2. Lie and
1915 * tell him the buffer is larger, because we only use 1
1916 * buffer/pkt, and the mtu will prevent overruns.
1918 big_pow2
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
+ MXGEFW_PAD
;
1919 if (big_pow2
< MYRI10GE_ALLOC_SIZE
/ 2) {
1920 while (!is_power_of_2(big_pow2
))
1922 mgp
->big_bytes
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
+ MXGEFW_PAD
;
1924 big_pow2
= MYRI10GE_ALLOC_SIZE
;
1925 mgp
->big_bytes
= big_pow2
;
1928 status
= myri10ge_allocate_rings(dev
);
1930 goto abort_with_irq
;
1932 /* now give firmware buffers sizes, and MTU */
1933 cmd
.data0
= dev
->mtu
+ ETH_HLEN
+ VLAN_HLEN
;
1934 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_MTU
, &cmd
, 0);
1935 cmd
.data0
= mgp
->small_bytes
;
1937 myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE
, &cmd
, 0);
1938 cmd
.data0
= big_pow2
;
1940 myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_BIG_BUFFER_SIZE
, &cmd
, 0);
1942 printk(KERN_ERR
"myri10ge: %s: Couldn't set buffer sizes\n",
1944 goto abort_with_rings
;
1947 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(mgp
->fw_stats_bus
);
1948 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(mgp
->fw_stats_bus
);
1949 cmd
.data2
= sizeof(struct mcp_irq_data
);
1950 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_SET_STATS_DMA_V2
, &cmd
, 0);
1951 if (status
== -ENOSYS
) {
1952 dma_addr_t bus
= mgp
->fw_stats_bus
;
1953 bus
+= offsetof(struct mcp_irq_data
, send_done_count
);
1954 cmd
.data0
= MYRI10GE_LOWPART_TO_U32(bus
);
1955 cmd
.data1
= MYRI10GE_HIGHPART_TO_U32(bus
);
1956 status
= myri10ge_send_cmd(mgp
,
1957 MXGEFW_CMD_SET_STATS_DMA_OBSOLETE
,
1959 /* Firmware cannot support multicast without STATS_DMA_V2 */
1960 mgp
->fw_multicast_support
= 0;
1962 mgp
->fw_multicast_support
= 1;
1965 printk(KERN_ERR
"myri10ge: %s: Couldn't set stats DMA\n",
1967 goto abort_with_rings
;
1970 mgp
->link_state
= htonl(~0U);
1971 mgp
->rdma_tags_available
= 15;
1973 lro_mgr
= &mgp
->rx_done
.lro_mgr
;
1975 lro_mgr
->features
= LRO_F_NAPI
;
1976 lro_mgr
->ip_summed
= CHECKSUM_COMPLETE
;
1977 lro_mgr
->ip_summed_aggr
= CHECKSUM_UNNECESSARY
;
1978 lro_mgr
->max_desc
= MYRI10GE_MAX_LRO_DESCRIPTORS
;
1979 lro_mgr
->lro_arr
= mgp
->rx_done
.lro_desc
;
1980 lro_mgr
->get_frag_header
= myri10ge_get_frag_header
;
1981 lro_mgr
->max_aggr
= myri10ge_lro_max_pkts
;
1982 lro_mgr
->frag_align_pad
= 2;
1983 if (lro_mgr
->max_aggr
> MAX_SKB_FRAGS
)
1984 lro_mgr
->max_aggr
= MAX_SKB_FRAGS
;
1986 napi_enable(&mgp
->napi
); /* must happen prior to any irq */
1988 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ETHERNET_UP
, &cmd
, 0);
1990 printk(KERN_ERR
"myri10ge: %s: Couldn't bring up link\n",
1992 goto abort_with_rings
;
1995 mgp
->wake_queue
= 0;
1996 mgp
->stop_queue
= 0;
1997 mgp
->running
= MYRI10GE_ETH_RUNNING
;
1998 mgp
->watchdog_timer
.expires
= jiffies
+ myri10ge_watchdog_timeout
* HZ
;
1999 add_timer(&mgp
->watchdog_timer
);
2000 netif_wake_queue(dev
);
2004 myri10ge_free_rings(dev
);
2007 myri10ge_free_irq(mgp
);
2010 mgp
->running
= MYRI10GE_ETH_STOPPED
;
2014 static int myri10ge_close(struct net_device
*dev
)
2016 struct myri10ge_priv
*mgp
;
2017 struct myri10ge_cmd cmd
;
2018 int status
, old_down_cnt
;
2020 mgp
= netdev_priv(dev
);
2022 if (mgp
->running
!= MYRI10GE_ETH_RUNNING
)
2025 if (mgp
->tx
.req_bytes
== NULL
)
2028 del_timer_sync(&mgp
->watchdog_timer
);
2029 mgp
->running
= MYRI10GE_ETH_STOPPING
;
2030 napi_disable(&mgp
->napi
);
2031 netif_carrier_off(dev
);
2032 netif_stop_queue(dev
);
2033 old_down_cnt
= mgp
->down_cnt
;
2035 status
= myri10ge_send_cmd(mgp
, MXGEFW_CMD_ETHERNET_DOWN
, &cmd
, 0);
2037 printk(KERN_ERR
"myri10ge: %s: Couldn't bring down link\n",
2040 wait_event_timeout(mgp
->down_wq
, old_down_cnt
!= mgp
->down_cnt
, HZ
);
2041 if (old_down_cnt
== mgp
->down_cnt
)
2042 printk(KERN_ERR
"myri10ge: %s never got down irq\n", dev
->name
);
2044 netif_tx_disable(dev
);
2045 myri10ge_free_irq(mgp
);
2046 myri10ge_free_rings(dev
);
2048 mgp
->running
= MYRI10GE_ETH_STOPPED
;
2052 /* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2053 * backwards one at a time and handle ring wraps */
2056 myri10ge_submit_req_backwards(struct myri10ge_tx_buf
*tx
,
2057 struct mcp_kreq_ether_send
*src
, int cnt
)
2059 int idx
, starting_slot
;
2060 starting_slot
= tx
->req
;
2063 idx
= (starting_slot
+ cnt
) & tx
->mask
;
2064 myri10ge_pio_copy(&tx
->lanai
[idx
], &src
[cnt
], sizeof(*src
));
2070 * copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2071 * at most 32 bytes at a time, so as to avoid involving the software
2072 * pio handler in the nic. We re-write the first segment's flags
2073 * to mark them valid only after writing the entire chain.
2077 myri10ge_submit_req(struct myri10ge_tx_buf
*tx
, struct mcp_kreq_ether_send
*src
,
2081 struct mcp_kreq_ether_send __iomem
*dstp
, *dst
;
2082 struct mcp_kreq_ether_send
*srcp
;
2085 idx
= tx
->req
& tx
->mask
;
2087 last_flags
= src
->flags
;
2090 dst
= dstp
= &tx
->lanai
[idx
];
2093 if ((idx
+ cnt
) < tx
->mask
) {
2094 for (i
= 0; i
< (cnt
- 1); i
+= 2) {
2095 myri10ge_pio_copy(dstp
, srcp
, 2 * sizeof(*src
));
2096 mb(); /* force write every 32 bytes */
2101 /* submit all but the first request, and ensure
2102 * that it is submitted below */
2103 myri10ge_submit_req_backwards(tx
, src
, cnt
);
2107 /* submit the first request */
2108 myri10ge_pio_copy(dstp
, srcp
, sizeof(*src
));
2109 mb(); /* barrier before setting valid flag */
2112 /* re-write the last 32-bits with the valid flags */
2113 src
->flags
= last_flags
;
2114 put_be32(*((__be32
*) src
+ 3), (__be32 __iomem
*) dst
+ 3);
2120 myri10ge_submit_req_wc(struct myri10ge_tx_buf
*tx
,
2121 struct mcp_kreq_ether_send
*src
, int cnt
)
2126 myri10ge_pio_copy(tx
->wc_fifo
, src
, 64);
2132 /* pad it to 64 bytes. The src is 64 bytes bigger than it
2133 * needs to be so that we don't overrun it */
2134 myri10ge_pio_copy(tx
->wc_fifo
+ MXGEFW_ETH_SEND_OFFSET(cnt
),
2141 * Transmit a packet. We need to split the packet so that a single
2142 * segment does not cross myri10ge->tx.boundary, so this makes segment
2143 * counting tricky. So rather than try to count segments up front, we
2144 * just give up if there are too few segments to hold a reasonably
2145 * fragmented packet currently available. If we run
2146 * out of segments while preparing a packet for DMA, we just linearize
2150 static int myri10ge_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
2152 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2153 struct mcp_kreq_ether_send
*req
;
2154 struct myri10ge_tx_buf
*tx
= &mgp
->tx
;
2155 struct skb_frag_struct
*frag
;
2158 __be32 high_swapped
;
2160 int idx
, last_idx
, avail
, frag_cnt
, frag_idx
, count
, mss
, max_segments
;
2161 u16 pseudo_hdr_offset
, cksum_offset
;
2162 int cum_len
, seglen
, boundary
, rdma_count
;
2167 avail
= tx
->mask
- 1 - (tx
->req
- tx
->done
);
2170 max_segments
= MXGEFW_MAX_SEND_DESC
;
2172 if (skb_is_gso(skb
)) {
2173 mss
= skb_shinfo(skb
)->gso_size
;
2174 max_segments
= MYRI10GE_MAX_SEND_DESC_TSO
;
2177 if ((unlikely(avail
< max_segments
))) {
2178 /* we are out of transmit resources */
2180 netif_stop_queue(dev
);
2184 /* Setup checksum offloading, if needed */
2186 pseudo_hdr_offset
= 0;
2188 flags
= (MXGEFW_FLAGS_NO_TSO
| MXGEFW_FLAGS_FIRST
);
2189 if (likely(skb
->ip_summed
== CHECKSUM_PARTIAL
)) {
2190 cksum_offset
= skb_transport_offset(skb
);
2191 pseudo_hdr_offset
= cksum_offset
+ skb
->csum_offset
;
2192 /* If the headers are excessively large, then we must
2193 * fall back to a software checksum */
2194 if (unlikely(!mss
&& (cksum_offset
> 255 ||
2195 pseudo_hdr_offset
> 127))) {
2196 if (skb_checksum_help(skb
))
2199 pseudo_hdr_offset
= 0;
2201 odd_flag
= MXGEFW_FLAGS_ALIGN_ODD
;
2202 flags
|= MXGEFW_FLAGS_CKSUM
;
2208 if (mss
) { /* TSO */
2209 /* this removes any CKSUM flag from before */
2210 flags
= (MXGEFW_FLAGS_TSO_HDR
| MXGEFW_FLAGS_FIRST
);
2212 /* negative cum_len signifies to the
2213 * send loop that we are still in the
2214 * header portion of the TSO packet.
2215 * TSO header can be at most 1KB long */
2216 cum_len
= -(skb_transport_offset(skb
) + tcp_hdrlen(skb
));
2218 /* for IPv6 TSO, the checksum offset stores the
2219 * TCP header length, to save the firmware from
2220 * the need to parse the headers */
2221 if (skb_is_gso_v6(skb
)) {
2222 cksum_offset
= tcp_hdrlen(skb
);
2223 /* Can only handle headers <= max_tso6 long */
2224 if (unlikely(-cum_len
> mgp
->max_tso6
))
2225 return myri10ge_sw_tso(skb
, dev
);
2227 /* for TSO, pseudo_hdr_offset holds mss.
2228 * The firmware figures out where to put
2229 * the checksum by parsing the header. */
2230 pseudo_hdr_offset
= mss
;
2232 /* Mark small packets, and pad out tiny packets */
2233 if (skb
->len
<= MXGEFW_SEND_SMALL_SIZE
) {
2234 flags
|= MXGEFW_FLAGS_SMALL
;
2236 /* pad frames to at least ETH_ZLEN bytes */
2237 if (unlikely(skb
->len
< ETH_ZLEN
)) {
2238 if (skb_padto(skb
, ETH_ZLEN
)) {
2239 /* The packet is gone, so we must
2241 mgp
->stats
.tx_dropped
+= 1;
2244 /* adjust the len to account for the zero pad
2245 * so that the nic can know how long it is */
2246 skb
->len
= ETH_ZLEN
;
2250 /* map the skb for DMA */
2251 len
= skb
->len
- skb
->data_len
;
2252 idx
= tx
->req
& tx
->mask
;
2253 tx
->info
[idx
].skb
= skb
;
2254 bus
= pci_map_single(mgp
->pdev
, skb
->data
, len
, PCI_DMA_TODEVICE
);
2255 pci_unmap_addr_set(&tx
->info
[idx
], bus
, bus
);
2256 pci_unmap_len_set(&tx
->info
[idx
], len
, len
);
2258 frag_cnt
= skb_shinfo(skb
)->nr_frags
;
2263 /* "rdma_count" is the number of RDMAs belonging to the
2264 * current packet BEFORE the current send request. For
2265 * non-TSO packets, this is equal to "count".
2266 * For TSO packets, rdma_count needs to be reset
2267 * to 0 after a segment cut.
2269 * The rdma_count field of the send request is
2270 * the number of RDMAs of the packet starting at
2271 * that request. For TSO send requests with one ore more cuts
2272 * in the middle, this is the number of RDMAs starting
2273 * after the last cut in the request. All previous
2274 * segments before the last cut implicitly have 1 RDMA.
2276 * Since the number of RDMAs is not known beforehand,
2277 * it must be filled-in retroactively - after each
2278 * segmentation cut or at the end of the entire packet.
2282 /* Break the SKB or Fragment up into pieces which
2283 * do not cross mgp->tx.boundary */
2284 low
= MYRI10GE_LOWPART_TO_U32(bus
);
2285 high_swapped
= htonl(MYRI10GE_HIGHPART_TO_U32(bus
));
2290 if (unlikely(count
== max_segments
))
2291 goto abort_linearize
;
2293 boundary
= (low
+ tx
->boundary
) & ~(tx
->boundary
- 1);
2294 seglen
= boundary
- low
;
2297 flags_next
= flags
& ~MXGEFW_FLAGS_FIRST
;
2298 cum_len_next
= cum_len
+ seglen
;
2299 if (mss
) { /* TSO */
2300 (req
- rdma_count
)->rdma_count
= rdma_count
+ 1;
2302 if (likely(cum_len
>= 0)) { /* payload */
2303 int next_is_first
, chop
;
2305 chop
= (cum_len_next
> mss
);
2306 cum_len_next
= cum_len_next
% mss
;
2307 next_is_first
= (cum_len_next
== 0);
2308 flags
|= chop
* MXGEFW_FLAGS_TSO_CHOP
;
2309 flags_next
|= next_is_first
*
2311 rdma_count
|= -(chop
| next_is_first
);
2312 rdma_count
+= chop
& !next_is_first
;
2313 } else if (likely(cum_len_next
>= 0)) { /* header ends */
2319 small
= (mss
<= MXGEFW_SEND_SMALL_SIZE
);
2320 flags_next
= MXGEFW_FLAGS_TSO_PLD
|
2321 MXGEFW_FLAGS_FIRST
|
2322 (small
* MXGEFW_FLAGS_SMALL
);
2325 req
->addr_high
= high_swapped
;
2326 req
->addr_low
= htonl(low
);
2327 req
->pseudo_hdr_offset
= htons(pseudo_hdr_offset
);
2328 req
->pad
= 0; /* complete solid 16-byte block; does this matter? */
2329 req
->rdma_count
= 1;
2330 req
->length
= htons(seglen
);
2331 req
->cksum_offset
= cksum_offset
;
2332 req
->flags
= flags
| ((cum_len
& 1) * odd_flag
);
2336 cum_len
= cum_len_next
;
2341 if (cksum_offset
!= 0 && !(mss
&& skb_is_gso_v6(skb
))) {
2342 if (unlikely(cksum_offset
> seglen
))
2343 cksum_offset
-= seglen
;
2348 if (frag_idx
== frag_cnt
)
2351 /* map next fragment for DMA */
2352 idx
= (count
+ tx
->req
) & tx
->mask
;
2353 frag
= &skb_shinfo(skb
)->frags
[frag_idx
];
2356 bus
= pci_map_page(mgp
->pdev
, frag
->page
, frag
->page_offset
,
2357 len
, PCI_DMA_TODEVICE
);
2358 pci_unmap_addr_set(&tx
->info
[idx
], bus
, bus
);
2359 pci_unmap_len_set(&tx
->info
[idx
], len
, len
);
2362 (req
- rdma_count
)->rdma_count
= rdma_count
;
2366 req
->flags
|= MXGEFW_FLAGS_TSO_LAST
;
2367 } while (!(req
->flags
& (MXGEFW_FLAGS_TSO_CHOP
|
2368 MXGEFW_FLAGS_FIRST
)));
2369 idx
= ((count
- 1) + tx
->req
) & tx
->mask
;
2370 tx
->info
[idx
].last
= 1;
2371 if (tx
->wc_fifo
== NULL
)
2372 myri10ge_submit_req(tx
, tx
->req_list
, count
);
2374 myri10ge_submit_req_wc(tx
, tx
->req_list
, count
);
2376 if ((avail
- count
) < MXGEFW_MAX_SEND_DESC
) {
2378 netif_stop_queue(dev
);
2380 dev
->trans_start
= jiffies
;
2384 /* Free any DMA resources we've alloced and clear out the skb
2385 * slot so as to not trip up assertions, and to avoid a
2386 * double-free if linearizing fails */
2388 last_idx
= (idx
+ 1) & tx
->mask
;
2389 idx
= tx
->req
& tx
->mask
;
2390 tx
->info
[idx
].skb
= NULL
;
2392 len
= pci_unmap_len(&tx
->info
[idx
], len
);
2394 if (tx
->info
[idx
].skb
!= NULL
)
2395 pci_unmap_single(mgp
->pdev
,
2396 pci_unmap_addr(&tx
->info
[idx
],
2400 pci_unmap_page(mgp
->pdev
,
2401 pci_unmap_addr(&tx
->info
[idx
],
2404 pci_unmap_len_set(&tx
->info
[idx
], len
, 0);
2405 tx
->info
[idx
].skb
= NULL
;
2407 idx
= (idx
+ 1) & tx
->mask
;
2408 } while (idx
!= last_idx
);
2409 if (skb_is_gso(skb
)) {
2411 "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
2416 if (skb_linearize(skb
))
2419 mgp
->tx_linearized
++;
2423 dev_kfree_skb_any(skb
);
2424 mgp
->stats
.tx_dropped
+= 1;
2429 static int myri10ge_sw_tso(struct sk_buff
*skb
, struct net_device
*dev
)
2431 struct sk_buff
*segs
, *curr
;
2432 struct myri10ge_priv
*mgp
= dev
->priv
;
2435 segs
= skb_gso_segment(skb
, dev
->features
& ~NETIF_F_TSO6
);
2436 if (unlikely(IS_ERR(segs
)))
2443 status
= myri10ge_xmit(curr
, dev
);
2445 dev_kfree_skb_any(curr
);
2450 dev_kfree_skb_any(segs
);
2455 dev_kfree_skb_any(skb
);
2459 dev_kfree_skb_any(skb
);
2460 mgp
->stats
.tx_dropped
+= 1;
2464 static struct net_device_stats
*myri10ge_get_stats(struct net_device
*dev
)
2466 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2470 static void myri10ge_set_multicast_list(struct net_device
*dev
)
2472 struct myri10ge_cmd cmd
;
2473 struct myri10ge_priv
*mgp
;
2474 struct dev_mc_list
*mc_list
;
2475 __be32 data
[2] = { 0, 0 };
2477 DECLARE_MAC_BUF(mac
);
2479 mgp
= netdev_priv(dev
);
2480 /* can be called from atomic contexts,
2481 * pass 1 to force atomicity in myri10ge_send_cmd() */
2482 myri10ge_change_promisc(mgp
, dev
->flags
& IFF_PROMISC
, 1);
2484 /* This firmware is known to not support multicast */
2485 if (!mgp
->fw_multicast_support
)
2488 /* Disable multicast filtering */
2490 err
= myri10ge_send_cmd(mgp
, MXGEFW_ENABLE_ALLMULTI
, &cmd
, 1);
2492 printk(KERN_ERR
"myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
2493 " error status: %d\n", dev
->name
, err
);
2497 if ((dev
->flags
& IFF_ALLMULTI
) || mgp
->adopted_rx_filter_bug
) {
2498 /* request to disable multicast filtering, so quit here */
2502 /* Flush the filters */
2504 err
= myri10ge_send_cmd(mgp
, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS
,
2508 "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
2509 ", error status: %d\n", dev
->name
, err
);
2513 /* Walk the multicast list, and add each address */
2514 for (mc_list
= dev
->mc_list
; mc_list
!= NULL
; mc_list
= mc_list
->next
) {
2515 memcpy(data
, &mc_list
->dmi_addr
, 6);
2516 cmd
.data0
= ntohl(data
[0]);
2517 cmd
.data1
= ntohl(data
[1]);
2518 err
= myri10ge_send_cmd(mgp
, MXGEFW_JOIN_MULTICAST_GROUP
,
2522 printk(KERN_ERR
"myri10ge: %s: Failed "
2523 "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
2524 "%d\t", dev
->name
, err
);
2525 printk(KERN_ERR
"MAC %s\n",
2526 print_mac(mac
, mc_list
->dmi_addr
));
2530 /* Enable multicast filtering */
2531 err
= myri10ge_send_cmd(mgp
, MXGEFW_DISABLE_ALLMULTI
, &cmd
, 1);
2533 printk(KERN_ERR
"myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
2534 "error status: %d\n", dev
->name
, err
);
2544 static int myri10ge_set_mac_address(struct net_device
*dev
, void *addr
)
2546 struct sockaddr
*sa
= addr
;
2547 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2550 if (!is_valid_ether_addr(sa
->sa_data
))
2551 return -EADDRNOTAVAIL
;
2553 status
= myri10ge_update_mac_address(mgp
, sa
->sa_data
);
2556 "myri10ge: %s: changing mac address failed with %d\n",
2561 /* change the dev structure */
2562 memcpy(dev
->dev_addr
, sa
->sa_data
, 6);
2566 static int myri10ge_change_mtu(struct net_device
*dev
, int new_mtu
)
2568 struct myri10ge_priv
*mgp
= netdev_priv(dev
);
2571 if ((new_mtu
< 68) || (ETH_HLEN
+ new_mtu
> MYRI10GE_MAX_ETHER_MTU
)) {
2572 printk(KERN_ERR
"myri10ge: %s: new mtu (%d) is not valid\n",
2573 dev
->name
, new_mtu
);
2576 printk(KERN_INFO
"%s: changing mtu from %d to %d\n",
2577 dev
->name
, dev
->mtu
, new_mtu
);
2579 /* if we change the mtu on an active device, we must
2580 * reset the device so the firmware sees the change */
2581 myri10ge_close(dev
);
2591 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
2592 * Only do it if the bridge is a root port since we don't want to disturb
2593 * any other device, except if forced with myri10ge_ecrc_enable > 1.
2596 static void myri10ge_enable_ecrc(struct myri10ge_priv
*mgp
)
2598 struct pci_dev
*bridge
= mgp
->pdev
->bus
->self
;
2599 struct device
*dev
= &mgp
->pdev
->dev
;
2606 if (!myri10ge_ecrc_enable
|| !bridge
)
2609 /* check that the bridge is a root port */
2610 cap
= pci_find_capability(bridge
, PCI_CAP_ID_EXP
);
2611 pci_read_config_word(bridge
, cap
+ PCI_CAP_FLAGS
, &val
);
2612 ext_type
= (val
& PCI_EXP_FLAGS_TYPE
) >> 4;
2613 if (ext_type
!= PCI_EXP_TYPE_ROOT_PORT
) {
2614 if (myri10ge_ecrc_enable
> 1) {
2615 struct pci_dev
*old_bridge
= bridge
;
2617 /* Walk the hierarchy up to the root port
2618 * where ECRC has to be enabled */
2620 bridge
= bridge
->bus
->self
;
2623 "Failed to find root port"
2624 " to force ECRC\n");
2628 pci_find_capability(bridge
, PCI_CAP_ID_EXP
);
2629 pci_read_config_word(bridge
,
2630 cap
+ PCI_CAP_FLAGS
, &val
);
2631 ext_type
= (val
& PCI_EXP_FLAGS_TYPE
) >> 4;
2632 } while (ext_type
!= PCI_EXP_TYPE_ROOT_PORT
);
2635 "Forcing ECRC on non-root port %s"
2636 " (enabling on root port %s)\n",
2637 pci_name(old_bridge
), pci_name(bridge
));
2640 "Not enabling ECRC on non-root port %s\n",
2646 cap
= pci_find_ext_capability(bridge
, PCI_EXT_CAP_ID_ERR
);
2650 ret
= pci_read_config_dword(bridge
, cap
+ PCI_ERR_CAP
, &err_cap
);
2652 dev_err(dev
, "failed reading ext-conf-space of %s\n",
2654 dev_err(dev
, "\t pci=nommconf in use? "
2655 "or buggy/incomplete/absent ACPI MCFG attr?\n");
2658 if (!(err_cap
& PCI_ERR_CAP_ECRC_GENC
))
2661 err_cap
|= PCI_ERR_CAP_ECRC_GENE
;
2662 pci_write_config_dword(bridge
, cap
+ PCI_ERR_CAP
, err_cap
);
2663 dev_info(dev
, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge
));
2667 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
2668 * when the PCI-E Completion packets are aligned on an 8-byte
2669 * boundary. Some PCI-E chip sets always align Completion packets; on
2670 * the ones that do not, the alignment can be enforced by enabling
2671 * ECRC generation (if supported).
2673 * When PCI-E Completion packets are not aligned, it is actually more
2674 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
2676 * If the driver can neither enable ECRC nor verify that it has
2677 * already been enabled, then it must use a firmware image which works
2678 * around unaligned completion packets (myri10ge_ethp_z8e.dat), and it
2679 * should also ensure that it never gives the device a Read-DMA which is
2680 * larger than 2KB by setting the tx.boundary to 2KB. If ECRC is
2681 * enabled, then the driver should use the aligned (myri10ge_eth_z8e.dat)
2682 * firmware image, and set tx.boundary to 4KB.
2685 static void myri10ge_firmware_probe(struct myri10ge_priv
*mgp
)
2687 struct pci_dev
*pdev
= mgp
->pdev
;
2688 struct device
*dev
= &pdev
->dev
;
2691 mgp
->tx
.boundary
= 4096;
2693 * Verify the max read request size was set to 4KB
2694 * before trying the test with 4KB.
2696 status
= pcie_get_readrq(pdev
);
2698 dev_err(dev
, "Couldn't read max read req size: %d\n", status
);
2701 if (status
!= 4096) {
2702 dev_warn(dev
, "Max Read Request size != 4096 (%d)\n", status
);
2703 mgp
->tx
.boundary
= 2048;
2706 * load the optimized firmware (which assumes aligned PCIe
2707 * completions) in order to see if it works on this host.
2709 mgp
->fw_name
= myri10ge_fw_aligned
;
2710 status
= myri10ge_load_firmware(mgp
);
2716 * Enable ECRC if possible
2718 myri10ge_enable_ecrc(mgp
);
2721 * Run a DMA test which watches for unaligned completions and
2722 * aborts on the first one seen.
2725 status
= myri10ge_dma_test(mgp
, MXGEFW_CMD_UNALIGNED_TEST
);
2727 return; /* keep the aligned firmware */
2729 if (status
!= -E2BIG
)
2730 dev_warn(dev
, "DMA test failed: %d\n", status
);
2731 if (status
== -ENOSYS
)
2732 dev_warn(dev
, "Falling back to ethp! "
2733 "Please install up to date fw\n");
2735 /* fall back to using the unaligned firmware */
2736 mgp
->tx
.boundary
= 2048;
2737 mgp
->fw_name
= myri10ge_fw_unaligned
;
2741 static void myri10ge_select_firmware(struct myri10ge_priv
*mgp
)
2743 if (myri10ge_force_firmware
== 0) {
2744 int link_width
, exp_cap
;
2747 exp_cap
= pci_find_capability(mgp
->pdev
, PCI_CAP_ID_EXP
);
2748 pci_read_config_word(mgp
->pdev
, exp_cap
+ PCI_EXP_LNKSTA
, &lnk
);
2749 link_width
= (lnk
>> 4) & 0x3f;
2751 /* Check to see if Link is less than 8 or if the
2752 * upstream bridge is known to provide aligned
2754 if (link_width
< 8) {
2755 dev_info(&mgp
->pdev
->dev
, "PCIE x%d Link\n",
2757 mgp
->tx
.boundary
= 4096;
2758 mgp
->fw_name
= myri10ge_fw_aligned
;
2760 myri10ge_firmware_probe(mgp
);
2763 if (myri10ge_force_firmware
== 1) {
2764 dev_info(&mgp
->pdev
->dev
,
2765 "Assuming aligned completions (forced)\n");
2766 mgp
->tx
.boundary
= 4096;
2767 mgp
->fw_name
= myri10ge_fw_aligned
;
2769 dev_info(&mgp
->pdev
->dev
,
2770 "Assuming unaligned completions (forced)\n");
2771 mgp
->tx
.boundary
= 2048;
2772 mgp
->fw_name
= myri10ge_fw_unaligned
;
2775 if (myri10ge_fw_name
!= NULL
) {
2776 dev_info(&mgp
->pdev
->dev
, "overriding firmware to %s\n",
2778 mgp
->fw_name
= myri10ge_fw_name
;
2783 static int myri10ge_suspend(struct pci_dev
*pdev
, pm_message_t state
)
2785 struct myri10ge_priv
*mgp
;
2786 struct net_device
*netdev
;
2788 mgp
= pci_get_drvdata(pdev
);
2793 netif_device_detach(netdev
);
2794 if (netif_running(netdev
)) {
2795 printk(KERN_INFO
"myri10ge: closing %s\n", netdev
->name
);
2797 myri10ge_close(netdev
);
2800 myri10ge_dummy_rdma(mgp
, 0);
2801 pci_save_state(pdev
);
2802 pci_disable_device(pdev
);
2804 return pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
2807 static int myri10ge_resume(struct pci_dev
*pdev
)
2809 struct myri10ge_priv
*mgp
;
2810 struct net_device
*netdev
;
2814 mgp
= pci_get_drvdata(pdev
);
2818 pci_set_power_state(pdev
, 0); /* zeros conf space as a side effect */
2819 msleep(5); /* give card time to respond */
2820 pci_read_config_word(mgp
->pdev
, PCI_VENDOR_ID
, &vendor
);
2821 if (vendor
== 0xffff) {
2822 printk(KERN_ERR
"myri10ge: %s: device disappeared!\n",
2827 status
= pci_restore_state(pdev
);
2831 status
= pci_enable_device(pdev
);
2833 dev_err(&pdev
->dev
, "failed to enable device\n");
2837 pci_set_master(pdev
);
2839 myri10ge_reset(mgp
);
2840 myri10ge_dummy_rdma(mgp
, 1);
2842 /* Save configuration space to be restored if the
2843 * nic resets due to a parity error */
2844 pci_save_state(pdev
);
2846 if (netif_running(netdev
)) {
2848 status
= myri10ge_open(netdev
);
2851 goto abort_with_enabled
;
2854 netif_device_attach(netdev
);
2859 pci_disable_device(pdev
);
2863 #endif /* CONFIG_PM */
2865 static u32
myri10ge_read_reboot(struct myri10ge_priv
*mgp
)
2867 struct pci_dev
*pdev
= mgp
->pdev
;
2868 int vs
= mgp
->vendor_specific_offset
;
2871 /*enter read32 mode */
2872 pci_write_config_byte(pdev
, vs
+ 0x10, 0x3);
2874 /*read REBOOT_STATUS (0xfffffff0) */
2875 pci_write_config_dword(pdev
, vs
+ 0x18, 0xfffffff0);
2876 pci_read_config_dword(pdev
, vs
+ 0x14, &reboot
);
2881 * This watchdog is used to check whether the board has suffered
2882 * from a parity error and needs to be recovered.
2884 static void myri10ge_watchdog(struct work_struct
*work
)
2886 struct myri10ge_priv
*mgp
=
2887 container_of(work
, struct myri10ge_priv
, watchdog_work
);
2892 mgp
->watchdog_resets
++;
2893 pci_read_config_word(mgp
->pdev
, PCI_COMMAND
, &cmd
);
2894 if ((cmd
& PCI_COMMAND_MASTER
) == 0) {
2895 /* Bus master DMA disabled? Check to see
2896 * if the card rebooted due to a parity error
2897 * For now, just report it */
2898 reboot
= myri10ge_read_reboot(mgp
);
2900 "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
2901 mgp
->dev
->name
, reboot
,
2902 myri10ge_reset_recover
? " " : " not");
2903 if (myri10ge_reset_recover
== 0)
2906 myri10ge_reset_recover
--;
2909 * A rebooted nic will come back with config space as
2910 * it was after power was applied to PCIe bus.
2911 * Attempt to restore config space which was saved
2912 * when the driver was loaded, or the last time the
2913 * nic was resumed from power saving mode.
2915 pci_restore_state(mgp
->pdev
);
2917 /* save state again for accounting reasons */
2918 pci_save_state(mgp
->pdev
);
2921 /* if we get back -1's from our slot, perhaps somebody
2922 * powered off our card. Don't try to reset it in
2924 if (cmd
== 0xffff) {
2925 pci_read_config_word(mgp
->pdev
, PCI_VENDOR_ID
, &vendor
);
2926 if (vendor
== 0xffff) {
2928 "myri10ge: %s: device disappeared!\n",
2933 /* Perhaps it is a software error. Try to reset */
2935 printk(KERN_ERR
"myri10ge: %s: device timeout, resetting\n",
2937 printk(KERN_INFO
"myri10ge: %s: %d %d %d %d %d\n",
2938 mgp
->dev
->name
, mgp
->tx
.req
, mgp
->tx
.done
,
2939 mgp
->tx
.pkt_start
, mgp
->tx
.pkt_done
,
2940 (int)ntohl(mgp
->fw_stats
->send_done_count
));
2942 printk(KERN_INFO
"myri10ge: %s: %d %d %d %d %d\n",
2943 mgp
->dev
->name
, mgp
->tx
.req
, mgp
->tx
.done
,
2944 mgp
->tx
.pkt_start
, mgp
->tx
.pkt_done
,
2945 (int)ntohl(mgp
->fw_stats
->send_done_count
));
2948 myri10ge_close(mgp
->dev
);
2949 status
= myri10ge_load_firmware(mgp
);
2951 printk(KERN_ERR
"myri10ge: %s: failed to load firmware\n",
2954 myri10ge_open(mgp
->dev
);
2959 * We use our own timer routine rather than relying upon
2960 * netdev->tx_timeout because we have a very large hardware transmit
2961 * queue. Due to the large queue, the netdev->tx_timeout function
2962 * cannot detect a NIC with a parity error in a timely fashion if the
2963 * NIC is lightly loaded.
2965 static void myri10ge_watchdog_timer(unsigned long arg
)
2967 struct myri10ge_priv
*mgp
;
2970 mgp
= (struct myri10ge_priv
*)arg
;
2972 if (mgp
->rx_small
.watchdog_needed
) {
2973 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_small
,
2974 mgp
->small_bytes
+ MXGEFW_PAD
, 1);
2975 if (mgp
->rx_small
.fill_cnt
- mgp
->rx_small
.cnt
>=
2976 myri10ge_fill_thresh
)
2977 mgp
->rx_small
.watchdog_needed
= 0;
2979 if (mgp
->rx_big
.watchdog_needed
) {
2980 myri10ge_alloc_rx_pages(mgp
, &mgp
->rx_big
, mgp
->big_bytes
, 1);
2981 if (mgp
->rx_big
.fill_cnt
- mgp
->rx_big
.cnt
>=
2982 myri10ge_fill_thresh
)
2983 mgp
->rx_big
.watchdog_needed
= 0;
2985 rx_pause_cnt
= ntohl(mgp
->fw_stats
->dropped_pause
);
2987 if (mgp
->tx
.req
!= mgp
->tx
.done
&&
2988 mgp
->tx
.done
== mgp
->watchdog_tx_done
&&
2989 mgp
->watchdog_tx_req
!= mgp
->watchdog_tx_done
) {
2990 /* nic seems like it might be stuck.. */
2991 if (rx_pause_cnt
!= mgp
->watchdog_pause
) {
2992 if (net_ratelimit())
2993 printk(KERN_WARNING
"myri10ge %s:"
2994 "TX paused, check link partner\n",
2997 schedule_work(&mgp
->watchdog_work
);
3002 mod_timer(&mgp
->watchdog_timer
,
3003 jiffies
+ myri10ge_watchdog_timeout
* HZ
);
3004 mgp
->watchdog_tx_done
= mgp
->tx
.done
;
3005 mgp
->watchdog_tx_req
= mgp
->tx
.req
;
3006 mgp
->watchdog_pause
= rx_pause_cnt
;
3009 static int myri10ge_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
3011 struct net_device
*netdev
;
3012 struct myri10ge_priv
*mgp
;
3013 struct device
*dev
= &pdev
->dev
;
3016 int status
= -ENXIO
;
3019 netdev
= alloc_etherdev(sizeof(*mgp
));
3020 if (netdev
== NULL
) {
3021 dev_err(dev
, "Could not allocate ethernet device\n");
3025 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
3027 mgp
= netdev_priv(netdev
);
3029 netif_napi_add(netdev
, &mgp
->napi
, myri10ge_poll
, myri10ge_napi_weight
);
3031 mgp
->csum_flag
= MXGEFW_FLAGS_CKSUM
;
3032 mgp
->pause
= myri10ge_flow_control
;
3033 mgp
->intr_coal_delay
= myri10ge_intr_coal_delay
;
3034 mgp
->msg_enable
= netif_msg_init(myri10ge_debug
, MYRI10GE_MSG_DEFAULT
);
3035 init_waitqueue_head(&mgp
->down_wq
);
3037 if (pci_enable_device(pdev
)) {
3038 dev_err(&pdev
->dev
, "pci_enable_device call failed\n");
3040 goto abort_with_netdev
;
3043 /* Find the vendor-specific cap so we can check
3044 * the reboot register later on */
3045 mgp
->vendor_specific_offset
3046 = pci_find_capability(pdev
, PCI_CAP_ID_VNDR
);
3048 /* Set our max read request to 4KB */
3049 status
= pcie_set_readrq(pdev
, 4096);
3051 dev_err(&pdev
->dev
, "Error %d writing PCI_EXP_DEVCTL\n",
3053 goto abort_with_netdev
;
3056 pci_set_master(pdev
);
3058 status
= pci_set_dma_mask(pdev
, DMA_64BIT_MASK
);
3062 "64-bit pci address mask was refused, "
3064 status
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
3067 dev_err(&pdev
->dev
, "Error %d setting DMA mask\n", status
);
3068 goto abort_with_netdev
;
3070 mgp
->cmd
= dma_alloc_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3071 &mgp
->cmd_bus
, GFP_KERNEL
);
3072 if (mgp
->cmd
== NULL
)
3073 goto abort_with_netdev
;
3075 mgp
->fw_stats
= dma_alloc_coherent(&pdev
->dev
, sizeof(*mgp
->fw_stats
),
3076 &mgp
->fw_stats_bus
, GFP_KERNEL
);
3077 if (mgp
->fw_stats
== NULL
)
3078 goto abort_with_cmd
;
3080 mgp
->board_span
= pci_resource_len(pdev
, 0);
3081 mgp
->iomem_base
= pci_resource_start(pdev
, 0);
3083 mgp
->wc_enabled
= 0;
3085 mgp
->mtrr
= mtrr_add(mgp
->iomem_base
, mgp
->board_span
,
3086 MTRR_TYPE_WRCOMB
, 1);
3088 mgp
->wc_enabled
= 1;
3090 /* Hack. need to get rid of these magic numbers */
3092 2 * 1024 * 1024 - (2 * (48 * 1024) + (32 * 1024)) - 0x100;
3093 if (mgp
->sram_size
> mgp
->board_span
) {
3094 dev_err(&pdev
->dev
, "board span %ld bytes too small\n",
3098 mgp
->sram
= ioremap(mgp
->iomem_base
, mgp
->board_span
);
3099 if (mgp
->sram
== NULL
) {
3100 dev_err(&pdev
->dev
, "ioremap failed for %ld bytes at 0x%lx\n",
3101 mgp
->board_span
, mgp
->iomem_base
);
3105 memcpy_fromio(mgp
->eeprom_strings
,
3106 mgp
->sram
+ mgp
->sram_size
- MYRI10GE_EEPROM_STRINGS_SIZE
,
3107 MYRI10GE_EEPROM_STRINGS_SIZE
);
3108 memset(mgp
->eeprom_strings
+ MYRI10GE_EEPROM_STRINGS_SIZE
- 2, 0, 2);
3109 status
= myri10ge_read_mac_addr(mgp
);
3111 goto abort_with_ioremap
;
3113 for (i
= 0; i
< ETH_ALEN
; i
++)
3114 netdev
->dev_addr
[i
] = mgp
->mac_addr
[i
];
3116 /* allocate rx done ring */
3117 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
3118 mgp
->rx_done
.entry
= dma_alloc_coherent(&pdev
->dev
, bytes
,
3119 &mgp
->rx_done
.bus
, GFP_KERNEL
);
3120 if (mgp
->rx_done
.entry
== NULL
)
3121 goto abort_with_ioremap
;
3122 memset(mgp
->rx_done
.entry
, 0, bytes
);
3124 myri10ge_select_firmware(mgp
);
3126 status
= myri10ge_load_firmware(mgp
);
3128 dev_err(&pdev
->dev
, "failed to load firmware\n");
3129 goto abort_with_rx_done
;
3132 status
= myri10ge_reset(mgp
);
3134 dev_err(&pdev
->dev
, "failed reset\n");
3135 goto abort_with_firmware
;
3138 pci_set_drvdata(pdev
, mgp
);
3139 if ((myri10ge_initial_mtu
+ ETH_HLEN
) > MYRI10GE_MAX_ETHER_MTU
)
3140 myri10ge_initial_mtu
= MYRI10GE_MAX_ETHER_MTU
- ETH_HLEN
;
3141 if ((myri10ge_initial_mtu
+ ETH_HLEN
) < 68)
3142 myri10ge_initial_mtu
= 68;
3143 netdev
->mtu
= myri10ge_initial_mtu
;
3144 netdev
->open
= myri10ge_open
;
3145 netdev
->stop
= myri10ge_close
;
3146 netdev
->hard_start_xmit
= myri10ge_xmit
;
3147 netdev
->get_stats
= myri10ge_get_stats
;
3148 netdev
->base_addr
= mgp
->iomem_base
;
3149 netdev
->change_mtu
= myri10ge_change_mtu
;
3150 netdev
->set_multicast_list
= myri10ge_set_multicast_list
;
3151 netdev
->set_mac_address
= myri10ge_set_mac_address
;
3152 netdev
->features
= mgp
->features
;
3154 netdev
->features
|= NETIF_F_HIGHDMA
;
3156 /* make sure we can get an irq, and that MSI can be
3157 * setup (if available). Also ensure netdev->irq
3158 * is set to correct value if MSI is enabled */
3159 status
= myri10ge_request_irq(mgp
);
3161 goto abort_with_firmware
;
3162 netdev
->irq
= pdev
->irq
;
3163 myri10ge_free_irq(mgp
);
3165 /* Save configuration space to be restored if the
3166 * nic resets due to a parity error */
3167 pci_save_state(pdev
);
3169 /* Setup the watchdog timer */
3170 setup_timer(&mgp
->watchdog_timer
, myri10ge_watchdog_timer
,
3171 (unsigned long)mgp
);
3173 SET_ETHTOOL_OPS(netdev
, &myri10ge_ethtool_ops
);
3174 INIT_WORK(&mgp
->watchdog_work
, myri10ge_watchdog
);
3175 status
= register_netdev(netdev
);
3177 dev_err(&pdev
->dev
, "register_netdev failed: %d\n", status
);
3178 goto abort_with_state
;
3180 dev_info(dev
, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3181 (mgp
->msi_enabled
? "MSI" : "xPIC"),
3182 netdev
->irq
, mgp
->tx
.boundary
, mgp
->fw_name
,
3183 (mgp
->wc_enabled
? "Enabled" : "Disabled"));
3188 pci_restore_state(pdev
);
3190 abort_with_firmware
:
3191 myri10ge_dummy_rdma(mgp
, 0);
3194 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
3195 dma_free_coherent(&pdev
->dev
, bytes
,
3196 mgp
->rx_done
.entry
, mgp
->rx_done
.bus
);
3204 mtrr_del(mgp
->mtrr
, mgp
->iomem_base
, mgp
->board_span
);
3206 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->fw_stats
),
3207 mgp
->fw_stats
, mgp
->fw_stats_bus
);
3210 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3211 mgp
->cmd
, mgp
->cmd_bus
);
3215 free_netdev(netdev
);
3222 * Does what is necessary to shutdown one Myrinet device. Called
3223 * once for each Myrinet card by the kernel when a module is
3226 static void myri10ge_remove(struct pci_dev
*pdev
)
3228 struct myri10ge_priv
*mgp
;
3229 struct net_device
*netdev
;
3232 mgp
= pci_get_drvdata(pdev
);
3236 flush_scheduled_work();
3238 unregister_netdev(netdev
);
3240 myri10ge_dummy_rdma(mgp
, 0);
3242 /* avoid a memory leak */
3243 pci_restore_state(pdev
);
3245 bytes
= myri10ge_max_intr_slots
* sizeof(*mgp
->rx_done
.entry
);
3246 dma_free_coherent(&pdev
->dev
, bytes
,
3247 mgp
->rx_done
.entry
, mgp
->rx_done
.bus
);
3253 mtrr_del(mgp
->mtrr
, mgp
->iomem_base
, mgp
->board_span
);
3255 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->fw_stats
),
3256 mgp
->fw_stats
, mgp
->fw_stats_bus
);
3258 dma_free_coherent(&pdev
->dev
, sizeof(*mgp
->cmd
),
3259 mgp
->cmd
, mgp
->cmd_bus
);
3261 free_netdev(netdev
);
3262 pci_set_drvdata(pdev
, NULL
);
3265 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
3266 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
3268 static struct pci_device_id myri10ge_pci_tbl
[] = {
3269 {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM
, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E
)},
3271 (PCI_VENDOR_ID_MYRICOM
, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9
)},
3275 static struct pci_driver myri10ge_driver
= {
3277 .probe
= myri10ge_probe
,
3278 .remove
= myri10ge_remove
,
3279 .id_table
= myri10ge_pci_tbl
,
3281 .suspend
= myri10ge_suspend
,
3282 .resume
= myri10ge_resume
,
3286 static __init
int myri10ge_init_module(void)
3288 printk(KERN_INFO
"%s: Version %s\n", myri10ge_driver
.name
,
3289 MYRI10GE_VERSION_STR
);
3290 return pci_register_driver(&myri10ge_driver
);
3293 module_init(myri10ge_init_module
);
3295 static __exit
void myri10ge_cleanup_module(void)
3297 pci_unregister_driver(&myri10ge_driver
);
3300 module_exit(myri10ge_cleanup_module
);