drivers/net/wireless/hostap/hostap_config.h

   1 #ifndef HOSTAP_CONFIG_H
   2 #define HOSTAP_CONFIG_H
   3
   4 /* In the previous versions of Host AP driver, support for user space version
   5  * of IEEE 802.11 management (hostapd) used to be disabled in the default
   6  * configuration. From now on, support for hostapd is always included and it is
   7  * possible to disable kernel driver version of IEEE 802.11 management with a
   8  * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */
   9 /* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */
  10
  11 /* Maximum number of events handler per one interrupt */
  12 #define PRISM2_MAX_INTERRUPT_EVENTS 20
  13
  14 /* Include code for downloading firmware images into volatile RAM. */
  15 #define PRISM2_DOWNLOAD_SUPPORT
  16
  17 /* Allow kernel configuration to enable download support. */
  18 #if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE)
  19 #define PRISM2_DOWNLOAD_SUPPORT
  20 #endif
  21
  22 /* Allow kernel configuration to enable non-volatile download support. */
  23 #ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM
  24 #define PRISM2_NON_VOLATILE_DOWNLOAD
  25 #endif
  26
  27 /* Save low-level I/O for debugging. This should not be enabled in normal use.
  28  */
  29 /* #define PRISM2_IO_DEBUG */
  30
  31 /* Following defines can be used to remove unneeded parts of the driver, e.g.,
  32  * to limit the size of the kernel module. Definitions can be added here in
  33  * hostap_config.h or they can be added to make command with EXTRA_CFLAGS,
  34  * e.g.,
  35  * 'make pccard EXTRA_CFLAGS="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"'
  36  */
  37
  38 /* Do not include debug messages into the driver */
  39 /* #define PRISM2_NO_DEBUG */
  40
  41 /* Do not include /proc/net/prism2/wlan#/{registers,debug} */
  42 /* #define PRISM2_NO_PROCFS_DEBUG */
  43
  44 /* Do not include station functionality (i.e., allow only Master (Host AP) mode
  45  */
  46 /* #define PRISM2_NO_STATION_MODES */
  47
  48 #endif /* HOSTAP_CONFIG_H */