1 /* MN10300 Watchdog timer
3 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
5 * - Derived from arch/i386/kernel/nmi.c
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public Licence
9 * as published by the Free Software Foundation; either version
10 * 2 of the Licence, or (at your option) any later version.
12 #include <linux/module.h>
13 #include <linux/sched.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/interrupt.h>
18 #include <linux/kernel_stat.h>
19 #include <linux/nmi.h>
20 #include <asm/processor.h>
21 #include <asm/system.h>
22 #include <asm/atomic.h>
23 #include <asm/intctl-regs.h>
24 #include <asm/rtc-regs.h>
25 #include <asm/div64.h>
27 #include <asm/gdb-stub.h>
28 #include <asm/proc/clock.h>
30 static DEFINE_SPINLOCK(watchdog_print_lock
);
31 static unsigned int watchdog
;
32 static unsigned int watchdog_hz
= 1;
33 unsigned int watchdog_alert_counter
;
35 EXPORT_SYMBOL(touch_nmi_watchdog
);
38 * the best way to detect whether a CPU has a 'hard lockup' problem
39 * is to check its timer makes IRQ counts. If they are not
40 * changing then that CPU has some problem.
42 * as these watchdog NMI IRQs are generated on every CPU, we only
43 * have to check the current processor.
45 * since NMIs dont listen to _any_ locks, we have to be extremely
46 * careful not to rely on unsafe variables. The printk might lock
47 * up though, so we have to break up any console locks first ...
48 * [when there will be more tty-related locks, break them up
51 static unsigned int last_irq_sums
[NR_CPUS
];
53 int __init
check_watchdog(void)
57 printk(KERN_INFO
"Testing Watchdog... ");
59 memcpy(tmp
, irq_stat
, sizeof(tmp
));
61 mdelay((10 * 1000) / watchdog_hz
); /* wait 10 ticks */
64 if (nmi_count(0) - tmp
[0].__nmi_count
<= 5) {
65 printk(KERN_WARNING
"CPU#%d: Watchdog appears to be stuck!\n",
70 printk(KERN_INFO
"OK.\n");
72 /* now that we know it works we can reduce NMI frequency to
73 * something more reasonable; makes a difference in some configs
80 static int __init
setup_watchdog(char *str
)
86 get_option(&str
, &opt
);
92 set_intr_stub(EXCEP_WDT
, watchdog_handler
);
93 ctr
= WDCTR_WDCK_65536th
;
94 WDCTR
= WDCTR_WDRST
| ctr
;
98 tmp
= __muldiv64u(1 << (16 + ctr
* 2), 1000000, MN10300_WDCLK
);
99 tmp
= 1000000000 / tmp
;
100 watchdog_hz
= (tmp
+ 500) / 1000;
106 __setup("watchdog=", setup_watchdog
);
108 void __init
watchdog_go(void)
113 printk(KERN_INFO
"Watchdog: running at %uHz\n", watchdog_hz
);
114 wdt
= WDCTR
& ~WDCTR_WDCNE
;
115 WDCTR
= wdt
| WDCTR_WDRST
;
117 WDCTR
= wdt
| WDCTR_WDCNE
;
125 void watchdog_interrupt(struct pt_regs
*regs
, enum exception_code excep
)
129 * Since current-> is always on the stack, and we always switch
130 * the stack NMI-atomically, it's safe to use smp_processor_id().
132 int sum
, cpu
= smp_processor_id();
135 wdt
= WDCTR
& ~WDCTR_WDCNE
;
141 kstat_this_cpu
.irqs
[NMIIRQ
]++;
142 sum
= irq_stat
[cpu
].__irq_count
;
144 if (last_irq_sums
[cpu
] == sum
) {
146 * Ayiee, looks like this CPU is stuck ...
147 * wait a few IRQs (5 seconds) before doing the oops ...
149 watchdog_alert_counter
++;
150 if (watchdog_alert_counter
== 5 * watchdog_hz
) {
151 spin_lock(&watchdog_print_lock
);
153 * We are in trouble anyway, lets at least try
154 * to get a message out.
158 "NMI Watchdog detected LOCKUP on CPU%d,"
159 " pc %08lx, registers:\n",
161 show_registers(regs
);
162 printk("console shuts up ...\n");
164 spin_unlock(&watchdog_print_lock
);
166 #ifdef CONFIG_GDBSTUB
168 gdbstub_exception(regs
, excep
);
170 gdbstub_intercept(regs
, excep
);
175 last_irq_sums
[cpu
] = sum
;
176 watchdog_alert_counter
= 0;
179 WDCTR
= wdt
| WDCTR_WDRST
;
181 WDCTR
= wdt
| WDCTR_WDCNE
;