e1000: Add device IDs of blade version of the 82571 quad port

[pv_ops_mirror.git] / arch / arm / mach-ixp4xx / common-pci.c

/*
 * arch/arm/mach-ixp4xx/common-pci.c 
 *
 * IXP4XX PCI routines for all platforms
 *
 * Maintainer: Deepak Saxena <dsaxena@plexity.net>
 *
 * Copyright (C) 2002 Intel Corporation.
 * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
 * Copyright (C) 2003-2004 MontaVista Software, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <asm/dma-mapping.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
#include <asm/hardware.h>


/*
 * IXP4xx PCI read function is dependent on whether we are 
 * running A0 or B0 (AppleGate) silicon.
 */
int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);

/*
 * Base address for PCI regsiter region
 */
unsigned long ixp4xx_pci_reg_base = 0;

/*
 * PCI cfg an I/O routines are done by programming a 
 * command/byte enable register, and then read/writing
 * the data from a data regsiter. We need to ensure
 * these transactions are atomic or we will end up
 * with corrupt data on the bus or in a driver.
 */
static DEFINE_SPINLOCK(ixp4xx_pci_lock);

/*
 * Read from PCI config space
 */
static void crp_read(u32 ad_cbe, u32 *data)
{
        unsigned long flags;
        spin_lock_irqsave(&ixp4xx_pci_lock, flags);
        *PCI_CRP_AD_CBE = ad_cbe;
        *data = *PCI_CRP_RDATA;
        spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
}

/*
 * Write to PCI config space
 */
static void crp_write(u32 ad_cbe, u32 data)
{ 
        unsigned long flags;
        spin_lock_irqsave(&ixp4xx_pci_lock, flags);
        *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
        *PCI_CRP_WDATA = data;
        spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
}

static inline int check_master_abort(void)
{
        /* check Master Abort bit after access */
        unsigned long isr = *PCI_ISR;

        if (isr & PCI_ISR_PFE) {
                /* make sure the Master Abort bit is reset */    
                *PCI_ISR = PCI_ISR_PFE;
                pr_debug("%s failed\n", __FUNCTION__);
                return 1;
        }

        return 0;
}

int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
{
        unsigned long flags;
        int retval = 0;
        int i;

        spin_lock_irqsave(&ixp4xx_pci_lock, flags);

        *PCI_NP_AD = addr;

        /* 
         * PCI workaround  - only works if NP PCI space reads have 
         * no side effects!!! Read 8 times. last one will be good.
         */
        for (i = 0; i < 8; i++) {
                *PCI_NP_CBE = cmd;
                *data = *PCI_NP_RDATA;
                *data = *PCI_NP_RDATA;
        }

        if(check_master_abort())
                retval = 1;

        spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
        return retval;
}

int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
{
        unsigned long flags;
        int retval = 0;

        spin_lock_irqsave(&ixp4xx_pci_lock, flags);

        *PCI_NP_AD = addr;

        /* set up and execute the read */    
        *PCI_NP_CBE = cmd;

        /* the result of the read is now in NP_RDATA */
        *data = *PCI_NP_RDATA; 

        if(check_master_abort())
                retval = 1;

        spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
        return retval;
}

int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
{    
        unsigned long flags;
        int retval = 0;

        spin_lock_irqsave(&ixp4xx_pci_lock, flags);

        *PCI_NP_AD = addr;

        /* set up the write */
        *PCI_NP_CBE = cmd;

        /* execute the write by writing to NP_WDATA */
        *PCI_NP_WDATA = data;

        if(check_master_abort())
                retval = 1;

        spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
        return retval;
}

static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
{
        u32 addr;
        if (!bus_num) {
                /* type 0 */
                addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | 
                    (where & ~3);       
        } else {
                /* type 1 */
                addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | 
                        ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
        }
        return addr;
}

/*
 * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
 * 0 and 3 are not valid indexes...
 */
static u32 bytemask[] = {
        /*0*/   0,
        /*1*/   0xff,
        /*2*/   0xffff,
        /*3*/   0,
        /*4*/   0xffffffff,
};

static u32 local_byte_lane_enable_bits(u32 n, int size)
{
        if (size == 1)
                return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
        if (size == 2)
                return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
        if (size == 4)
                return 0;
        return 0xffffffff;
}

static int local_read_config(int where, int size, u32 *value)
{ 
        u32 n, data;
        pr_debug("local_read_config from %d size %d\n", where, size);
        n = where % 4;
        crp_read(where & ~3, &data);
        *value = (data >> (8*n)) & bytemask[size];
        pr_debug("local_read_config read %#x\n", *value);
        return PCIBIOS_SUCCESSFUL;
}

static int local_write_config(int where, int size, u32 value)
{
        u32 n, byte_enables, data;
        pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
        n = where % 4;
        byte_enables = local_byte_lane_enable_bits(n, size);
        if (byte_enables == 0xffffffff)
                return PCIBIOS_BAD_REGISTER_NUMBER;
        data = value << (8*n);
        crp_write((where & ~3) | byte_enables, data);
        return PCIBIOS_SUCCESSFUL;
}

static u32 byte_lane_enable_bits(u32 n, int size)
{
        if (size == 1)
                return (0xf & ~BIT(n)) << 4;
        if (size == 2)
                return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
        if (size == 4)
                return 0;
        return 0xffffffff;
}

static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
{
        u32 n, byte_enables, addr, data;
        u8 bus_num = bus->number;

        pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
                bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));

        *value = 0xffffffff;
        n = where % 4;
        byte_enables = byte_lane_enable_bits(n, size);
        if (byte_enables == 0xffffffff)
                return PCIBIOS_BAD_REGISTER_NUMBER;

        addr = ixp4xx_config_addr(bus_num, devfn, where);
        if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
                return PCIBIOS_DEVICE_NOT_FOUND;

        *value = (data >> (8*n)) & bytemask[size];
        pr_debug("read_config_byte read %#x\n", *value);
        return PCIBIOS_SUCCESSFUL;
}

static int ixp4xx_pci_write_config(struct pci_bus *bus,  unsigned int devfn, int where, int size, u32 value)
{
        u32 n, byte_enables, addr, data;
        u8 bus_num = bus->number;

        pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
                size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));

        n = where % 4;
        byte_enables = byte_lane_enable_bits(n, size);
        if (byte_enables == 0xffffffff)
                return PCIBIOS_BAD_REGISTER_NUMBER;

        addr = ixp4xx_config_addr(bus_num, devfn, where);
        data = value << (8*n);
        if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
                return PCIBIOS_DEVICE_NOT_FOUND;

        return PCIBIOS_SUCCESSFUL;
}

struct pci_ops ixp4xx_ops = {
        .read =  ixp4xx_pci_read_config,
        .write = ixp4xx_pci_write_config,
};

/*
 * PCI abort handler
 */
static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
        u32 isr, status;

        isr = *PCI_ISR;
        local_read_config(PCI_STATUS, 2, &status);
        pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
                "status = %#x\n", addr, isr, status);

        /* make sure the Master Abort bit is reset */    
        *PCI_ISR = PCI_ISR_PFE;
        status |= PCI_STATUS_REC_MASTER_ABORT;
        local_write_config(PCI_STATUS, 2, status);

        /*
         * If it was an imprecise abort, then we need to correct the
         * return address to be _after_ the instruction.
         */
        if (fsr & (1 << 10))
                regs->ARM_pc += 4;

        return 0;
}


/*
 * Setup DMA mask to 64MB on PCI devices. Ignore all other devices.
 */
static int ixp4xx_pci_platform_notify(struct device *dev)
{
        if(dev->bus == &pci_bus_type) {
                *dev->dma_mask =  SZ_64M - 1;
                dev->coherent_dma_mask = SZ_64M - 1;
                dmabounce_register_dev(dev, 2048, 4096);
        }
        return 0;
}

static int ixp4xx_pci_platform_notify_remove(struct device *dev)
{
        if(dev->bus == &pci_bus_type) {
                dmabounce_unregister_dev(dev);
        }
        return 0;
}

int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
        return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
}

/*
 * Only first 64MB of memory can be accessed via PCI.
 * We use GFP_DMA to allocate safe buffers to do map/unmap.
 * This is really ugly and we need a better way of specifying
 * DMA-capable regions of memory.
 */
void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
        unsigned long *zhole_size)
{
        unsigned int sz = SZ_64M >> PAGE_SHIFT;

        /*
         * Only adjust if > 64M on current system
         */
        if (node || (zone_size[0] <= sz))
                return;

        zone_size[1] = zone_size[0] - sz;
        zone_size[0] = sz;
        zhole_size[1] = zhole_size[0];
        zhole_size[0] = 0;
}

void __init ixp4xx_pci_preinit(void)
{  
        unsigned long processor_id;

        asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :);

        /*
         * Determine which PCI read method to use.
         * Rev 0 IXP425 requires workaround.
         */
        if (!(processor_id & 0xf) && cpu_is_ixp42x()) {
                printk("PCI: IXP42x A0 silicon detected - "
                        "PCI Non-Prefetch Workaround Enabled\n");
                ixp4xx_pci_read = ixp4xx_pci_read_errata;
        } else
                ixp4xx_pci_read = ixp4xx_pci_read_no_errata;


        /* hook in our fault handler for PCI errors */
        hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort");

        pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");

        /* 
         * We use identity AHB->PCI address translation
         * in the 0x48000000 to 0x4bffffff address space
         */
        *PCI_PCIMEMBASE = 0x48494A4B;

        /* 
         * We also use identity PCI->AHB address translation
         * in 4 16MB BARs that begin at the physical memory start
         */
        *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + 
                ((PHYS_OFFSET & 0xFF000000) >> 8) +
                ((PHYS_OFFSET & 0xFF000000) >> 16) +
                ((PHYS_OFFSET & 0xFF000000) >> 24) +
                0x00010203;

        if (*PCI_CSR & PCI_CSR_HOST) {
                printk("PCI: IXP4xx is host\n");

                pr_debug("setup BARs in controller\n");

                /*
                 * We configure the PCI inbound memory windows to be 
                 * 1:1 mapped to SDRAM
                 */
                local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
                local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
                local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
                local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);

                /*
                 * Enable CSR window at 0xff000000.
                 */
                local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);

                /*
                 * Enable the IO window to be way up high, at 0xfffffc00
                 */
                local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
        } else {
                printk("PCI: IXP4xx is target - No bus scan performed\n");
        }

        printk("PCI: IXP4xx Using %s access for memory space\n",
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
                        "direct"
#else
                        "indirect"
#endif
                );

        pr_debug("clear error bits in ISR\n");
        *PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;

        /*
         * Set Initialize Complete in PCI Control Register: allow IXP4XX to
         * respond to PCI configuration cycles. Specify that the AHB bus is
         * operating in big endian mode. Set up byte lane swapping between 
         * little-endian PCI and the big-endian AHB bus 
         */
#ifdef __ARMEB__
        *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
#else
        *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
#endif

        pr_debug("DONE\n");
}

int ixp4xx_setup(int nr, struct pci_sys_data *sys)
{
        struct resource *res;

        if (nr >= 1)
                return 0;

        res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
        if (res == NULL) {
                /* 
                 * If we're out of memory this early, something is wrong,
                 * so we might as well catch it here.
                 */
                panic("PCI: unable to allocate resources?\n");
        }

        local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);

        res[0].name = "PCI I/O Space";
        res[0].start = 0x00000000;
        res[0].end = 0x0000ffff;
        res[0].flags = IORESOURCE_IO;

        res[1].name = "PCI Memory Space";
        res[1].start = PCIBIOS_MIN_MEM;
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
        res[1].end = 0x4bffffff;
#else
        res[1].end = 0x4fffffff;
#endif
        res[1].flags = IORESOURCE_MEM;

        request_resource(&ioport_resource, &res[0]);
        request_resource(&iomem_resource, &res[1]);

        sys->resource[0] = &res[0];
        sys->resource[1] = &res[1];
        sys->resource[2] = NULL;

        platform_notify = ixp4xx_pci_platform_notify;
        platform_notify_remove = ixp4xx_pci_platform_notify_remove;

        return 1;
}

struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
{
        return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
}

/*
 * We override these so we properly do dmabounce otherwise drivers
 * are able to set the dma_mask to 0xffffffff and we can no longer
 * trap bounces. :(
 *
 * We just return true on everyhing except for < 64MB in which case 
 * we will fail miseralby and die since we can't handle that case.
 */
int
pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
        if (mask >= SZ_64M - 1 )
                return 0;

        return -EIO;
}
    
int
pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
        if (mask >= SZ_64M - 1 )
                return 0;

        return -EIO;
}

EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);