e1000: Add device IDs of blade version of the 82571 quad port
[pv_ops_mirror.git] / arch / arm / mach-ixp4xx / common.c
blobc1271c449246ecf743d6bdce0e77e052ad1e74a1
1 /*
2 * arch/arm/mach-ixp4xx/common.c
4 * Generic code shared across all IXP4XX platforms
6 * Maintainer: Deepak Saxena <dsaxena@plexity.net>
8 * Copyright 2002 (c) Intel Corporation
9 * Copyright 2003-2004 (c) MontaVista, Software, Inc.
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
16 #include <linux/kernel.h>
17 #include <linux/mm.h>
18 #include <linux/init.h>
19 #include <linux/serial.h>
20 #include <linux/sched.h>
21 #include <linux/tty.h>
22 #include <linux/platform_device.h>
23 #include <linux/serial_core.h>
24 #include <linux/bootmem.h>
25 #include <linux/interrupt.h>
26 #include <linux/bitops.h>
27 #include <linux/time.h>
28 #include <linux/timex.h>
29 #include <linux/clocksource.h>
30 #include <linux/clockchips.h>
32 #include <asm/arch/udc.h>
33 #include <asm/hardware.h>
34 #include <asm/uaccess.h>
35 #include <asm/io.h>
36 #include <asm/pgtable.h>
37 #include <asm/page.h>
38 #include <asm/irq.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/irq.h>
42 #include <asm/mach/time.h>
44 static int __init ixp4xx_clocksource_init(void);
45 static int __init ixp4xx_clockevent_init(void);
46 static struct clock_event_device clockevent_ixp4xx;
48 /*************************************************************************
49 * IXP4xx chipset I/O mapping
50 *************************************************************************/
51 static struct map_desc ixp4xx_io_desc[] __initdata = {
52 { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
53 .virtual = IXP4XX_PERIPHERAL_BASE_VIRT,
54 .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
55 .length = IXP4XX_PERIPHERAL_REGION_SIZE,
56 .type = MT_DEVICE
57 }, { /* Expansion Bus Config Registers */
58 .virtual = IXP4XX_EXP_CFG_BASE_VIRT,
59 .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
60 .length = IXP4XX_EXP_CFG_REGION_SIZE,
61 .type = MT_DEVICE
62 }, { /* PCI Registers */
63 .virtual = IXP4XX_PCI_CFG_BASE_VIRT,
64 .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
65 .length = IXP4XX_PCI_CFG_REGION_SIZE,
66 .type = MT_DEVICE
68 #ifdef CONFIG_DEBUG_LL
69 { /* Debug UART mapping */
70 .virtual = IXP4XX_DEBUG_UART_BASE_VIRT,
71 .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
72 .length = IXP4XX_DEBUG_UART_REGION_SIZE,
73 .type = MT_DEVICE
75 #endif
78 void __init ixp4xx_map_io(void)
80 iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
84 /*************************************************************************
85 * IXP4xx chipset IRQ handling
87 * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
88 * (be it PCI or something else) configures that GPIO line
89 * as an IRQ.
90 **************************************************************************/
91 enum ixp4xx_irq_type {
92 IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
95 /* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
96 static unsigned long long ixp4xx_irq_edge = 0;
99 * IRQ -> GPIO mapping table
101 static signed char irq2gpio[32] = {
102 -1, -1, -1, -1, -1, -1, 0, 1,
103 -1, -1, -1, -1, -1, -1, -1, -1,
104 -1, -1, -1, 2, 3, 4, 5, 6,
105 7, 8, 9, 10, 11, 12, -1, -1,
108 int gpio_to_irq(int gpio)
110 int irq;
112 for (irq = 0; irq < 32; irq++) {
113 if (irq2gpio[irq] == gpio)
114 return irq;
116 return -EINVAL;
118 EXPORT_SYMBOL(gpio_to_irq);
120 int irq_to_gpio(int irq)
122 int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
124 if (gpio == -1)
125 return -EINVAL;
127 return gpio;
129 EXPORT_SYMBOL(irq_to_gpio);
131 static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
133 int line = irq2gpio[irq];
134 u32 int_style;
135 enum ixp4xx_irq_type irq_type;
136 volatile u32 *int_reg;
139 * Only for GPIO IRQs
141 if (line < 0)
142 return -EINVAL;
144 switch (type){
145 case IRQT_BOTHEDGE:
146 int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
147 irq_type = IXP4XX_IRQ_EDGE;
148 break;
149 case IRQT_RISING:
150 int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
151 irq_type = IXP4XX_IRQ_EDGE;
152 break;
153 case IRQT_FALLING:
154 int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
155 irq_type = IXP4XX_IRQ_EDGE;
156 break;
157 case IRQT_HIGH:
158 int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
159 irq_type = IXP4XX_IRQ_LEVEL;
160 break;
161 case IRQT_LOW:
162 int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
163 irq_type = IXP4XX_IRQ_LEVEL;
164 break;
165 default:
166 return -EINVAL;
169 if (irq_type == IXP4XX_IRQ_EDGE)
170 ixp4xx_irq_edge |= (1 << irq);
171 else
172 ixp4xx_irq_edge &= ~(1 << irq);
174 if (line >= 8) { /* pins 8-15 */
175 line -= 8;
176 int_reg = IXP4XX_GPIO_GPIT2R;
177 } else { /* pins 0-7 */
178 int_reg = IXP4XX_GPIO_GPIT1R;
181 /* Clear the style for the appropriate pin */
182 *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
183 (line * IXP4XX_GPIO_STYLE_SIZE));
185 *IXP4XX_GPIO_GPISR = (1 << line);
187 /* Set the new style */
188 *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
190 /* Configure the line as an input */
191 gpio_line_config(irq2gpio[irq], IXP4XX_GPIO_IN);
193 return 0;
196 static void ixp4xx_irq_mask(unsigned int irq)
198 if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32)
199 *IXP4XX_ICMR2 &= ~(1 << (irq - 32));
200 else
201 *IXP4XX_ICMR &= ~(1 << irq);
204 static void ixp4xx_irq_ack(unsigned int irq)
206 int line = (irq < 32) ? irq2gpio[irq] : -1;
208 if (line >= 0)
209 *IXP4XX_GPIO_GPISR = (1 << line);
213 * Level triggered interrupts on GPIO lines can only be cleared when the
214 * interrupt condition disappears.
216 static void ixp4xx_irq_unmask(unsigned int irq)
218 if (!(ixp4xx_irq_edge & (1 << irq)))
219 ixp4xx_irq_ack(irq);
221 if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32)
222 *IXP4XX_ICMR2 |= (1 << (irq - 32));
223 else
224 *IXP4XX_ICMR |= (1 << irq);
227 static struct irq_chip ixp4xx_irq_chip = {
228 .name = "IXP4xx",
229 .ack = ixp4xx_irq_ack,
230 .mask = ixp4xx_irq_mask,
231 .unmask = ixp4xx_irq_unmask,
232 .set_type = ixp4xx_set_irq_type,
235 void __init ixp4xx_init_irq(void)
237 int i = 0;
239 /* Route all sources to IRQ instead of FIQ */
240 *IXP4XX_ICLR = 0x0;
242 /* Disable all interrupt */
243 *IXP4XX_ICMR = 0x0;
245 if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
246 /* Route upper 32 sources to IRQ instead of FIQ */
247 *IXP4XX_ICLR2 = 0x00;
249 /* Disable upper 32 interrupts */
250 *IXP4XX_ICMR2 = 0x00;
253 /* Default to all level triggered */
254 for(i = 0; i < NR_IRQS; i++) {
255 set_irq_chip(i, &ixp4xx_irq_chip);
256 set_irq_handler(i, handle_level_irq);
257 set_irq_flags(i, IRQF_VALID);
262 /*************************************************************************
263 * IXP4xx timer tick
264 * We use OS timer1 on the CPU for the timer tick and the timestamp
265 * counter as a source of real clock ticks to account for missed jiffies.
266 *************************************************************************/
268 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
270 struct clock_event_device *evt = &clockevent_ixp4xx;
272 /* Clear Pending Interrupt by writing '1' to it */
273 *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
275 evt->event_handler(evt);
277 return IRQ_HANDLED;
280 static struct irqaction ixp4xx_timer_irq = {
281 .name = "timer1",
282 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
283 .handler = ixp4xx_timer_interrupt,
286 void __init ixp4xx_timer_init(void)
288 /* Reset/disable counter */
289 *IXP4XX_OSRT1 = 0;
291 /* Clear Pending Interrupt by writing '1' to it */
292 *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
294 /* Reset time-stamp counter */
295 *IXP4XX_OSTS = 0;
297 /* Connect the interrupt handler and enable the interrupt */
298 setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
300 ixp4xx_clocksource_init();
301 ixp4xx_clockevent_init();
304 struct sys_timer ixp4xx_timer = {
305 .init = ixp4xx_timer_init,
308 static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
310 void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
312 memcpy(&ixp4xx_udc_info, info, sizeof *info);
315 static struct resource ixp4xx_udc_resources[] = {
316 [0] = {
317 .start = 0xc800b000,
318 .end = 0xc800bfff,
319 .flags = IORESOURCE_MEM,
321 [1] = {
322 .start = IRQ_IXP4XX_USB,
323 .end = IRQ_IXP4XX_USB,
324 .flags = IORESOURCE_IRQ,
329 * USB device controller. The IXP4xx uses the same controller as PXA2XX,
330 * so we just use the same device.
332 static struct platform_device ixp4xx_udc_device = {
333 .name = "pxa2xx-udc",
334 .id = -1,
335 .num_resources = 2,
336 .resource = ixp4xx_udc_resources,
337 .dev = {
338 .platform_data = &ixp4xx_udc_info,
342 static struct platform_device *ixp4xx_devices[] __initdata = {
343 &ixp4xx_udc_device,
346 static struct resource ixp46x_i2c_resources[] = {
347 [0] = {
348 .start = 0xc8011000,
349 .end = 0xc801101c,
350 .flags = IORESOURCE_MEM,
352 [1] = {
353 .start = IRQ_IXP4XX_I2C,
354 .end = IRQ_IXP4XX_I2C,
355 .flags = IORESOURCE_IRQ
360 * I2C controller. The IXP46x uses the same block as the IOP3xx, so
361 * we just use the same device name.
363 static struct platform_device ixp46x_i2c_controller = {
364 .name = "IOP3xx-I2C",
365 .id = 0,
366 .num_resources = 2,
367 .resource = ixp46x_i2c_resources
370 static struct platform_device *ixp46x_devices[] __initdata = {
371 &ixp46x_i2c_controller
374 unsigned long ixp4xx_exp_bus_size;
375 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
377 void __init ixp4xx_sys_init(void)
379 ixp4xx_exp_bus_size = SZ_16M;
381 platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
383 if (cpu_is_ixp46x()) {
384 int region;
386 platform_add_devices(ixp46x_devices,
387 ARRAY_SIZE(ixp46x_devices));
389 for (region = 0; region < 7; region++) {
390 if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
391 ixp4xx_exp_bus_size = SZ_32M;
392 break;
397 printk("IXP4xx: Using %luMiB expansion bus window size\n",
398 ixp4xx_exp_bus_size >> 20);
402 * clocksource
404 cycle_t ixp4xx_get_cycles(void)
406 return *IXP4XX_OSTS;
409 static struct clocksource clocksource_ixp4xx = {
410 .name = "OSTS",
411 .rating = 200,
412 .read = ixp4xx_get_cycles,
413 .mask = CLOCKSOURCE_MASK(32),
414 .shift = 20,
415 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
418 unsigned long ixp4xx_timer_freq = FREQ;
419 static int __init ixp4xx_clocksource_init(void)
421 clocksource_ixp4xx.mult =
422 clocksource_hz2mult(ixp4xx_timer_freq,
423 clocksource_ixp4xx.shift);
424 clocksource_register(&clocksource_ixp4xx);
426 return 0;
430 * clockevents
432 static int ixp4xx_set_next_event(unsigned long evt,
433 struct clock_event_device *unused)
435 unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
437 *IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
439 return 0;
442 static void ixp4xx_set_mode(enum clock_event_mode mode,
443 struct clock_event_device *evt)
445 unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
447 switch (mode) {
448 case CLOCK_EVT_MODE_PERIODIC:
449 osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
450 opts = IXP4XX_OST_ENABLE;
451 break;
452 case CLOCK_EVT_MODE_ONESHOT:
453 /* period set by 'set next_event' */
454 osrt = 0;
455 opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
456 break;
457 case CLOCK_EVT_MODE_SHUTDOWN:
458 case CLOCK_EVT_MODE_UNUSED:
459 default:
460 osrt = opts = 0;
461 break;
462 case CLOCK_EVT_MODE_RESUME:
463 break;
466 *IXP4XX_OSRT1 = osrt | opts;
469 static struct clock_event_device clockevent_ixp4xx = {
470 .name = "ixp4xx timer1",
471 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
472 .rating = 200,
473 .shift = 24,
474 .set_mode = ixp4xx_set_mode,
475 .set_next_event = ixp4xx_set_next_event,
478 static int __init ixp4xx_clockevent_init(void)
480 clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
481 clockevent_ixp4xx.shift);
482 clockevent_ixp4xx.max_delta_ns =
483 clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
484 clockevent_ixp4xx.min_delta_ns =
485 clockevent_delta2ns(0xf, &clockevent_ixp4xx);
486 clockevent_ixp4xx.cpumask = cpumask_of_cpu(0);
488 clockevents_register_device(&clockevent_ixp4xx);
489 return 0;