arch/arm/mach-pxa/em-x270.c

   1 /*
   2  * Support for CompuLab EM-x270 platform
   3  *
   4  * Copyright (C) 2007 CompuLab, Ltd.
   5  * Author: Mike Rapoport <mike@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/irq.h>
  13 #include <linux/platform_device.h>
  14
  15 #include <linux/dm9000.h>
  16 #include <linux/rtc-v3020.h>
  17
  18 #include <linux/mtd/nand.h>
  19 #include <linux/mtd/partitions.h>
  20
  21 #include <asm/mach-types.h>
  22
  23 #include <asm/mach/arch.h>
  24
  25 #include <asm/arch/pxa-regs.h>
  26 #include <asm/arch/pxafb.h>
  27 #include <asm/arch/ohci.h>
  28 #include <asm/arch/mmc.h>
  29 #include <asm/arch/bitfield.h>
  30
  31 #include "generic.h"
  32
  33 /* GPIO IRQ usage */
  34 #define EM_X270_MMC_PD          (105)
  35 #define EM_X270_ETHIRQ          IRQ_GPIO(41)
  36 #define EM_X270_MMC_IRQ         IRQ_GPIO(13)
  37
  38 static struct resource em_x270_dm9k_resource[] = {
  39         [0] = {
  40                 .start = PXA_CS2_PHYS,
  41                 .end   = PXA_CS2_PHYS + 3,
  42                 .flags = IORESOURCE_MEM,
  43         },
  44         [1] = {
  45                 .start = PXA_CS2_PHYS + 8,
  46                 .end   = PXA_CS2_PHYS + 8 + 0x3f,
  47                 .flags = IORESOURCE_MEM,
  48         },
  49         [2] = {
  50                 .start = EM_X270_ETHIRQ,
  51                 .end   = EM_X270_ETHIRQ,
  52                 .flags = IORESOURCE_IRQ,
  53         }
  54 };
  55
  56 /* for the moment we limit ourselves to 32bit IO until some
  57  * better IO routines can be written and tested
  58  */
  59 static struct dm9000_plat_data em_x270_dm9k_platdata = {
  60         .flags          = DM9000_PLATF_32BITONLY,
  61 };
  62
  63 /* Ethernet device */
  64 static struct platform_device em_x270_dm9k = {
  65         .name           = "dm9000",
  66         .id             = 0,
  67         .num_resources  = ARRAY_SIZE(em_x270_dm9k_resource),
  68         .resource       = em_x270_dm9k_resource,
  69         .dev            = {
  70                 .platform_data = &em_x270_dm9k_platdata,
  71         }
  72 };
  73
  74 /* audio device */
  75 static struct platform_device em_x270_audio = {
  76         .name           = "pxa2xx-ac97",
  77         .id             = -1,
  78 };
  79
  80 /* WM9712 touchscreen controller. Hopefully the driver will make it to
  81  * the mainstream sometime */
  82 static struct platform_device em_x270_ts = {
  83         .name           = "wm97xx-ts",
  84         .id             = -1,
  85 };
  86
  87 /* RTC */
  88 static struct resource em_x270_v3020_resource[] = {
  89         [0] = {
  90                 .start = PXA_CS4_PHYS,
  91                 .end   = PXA_CS4_PHYS + 3,
  92                 .flags = IORESOURCE_MEM,
  93         },
  94 };
  95
  96 static struct v3020_platform_data em_x270_v3020_platdata = {
  97         .leftshift = 0,
  98 };
  99
 100 static struct platform_device em_x270_rtc = {
 101         .name           = "v3020",
 102         .num_resources  = ARRAY_SIZE(em_x270_v3020_resource),
 103         .resource       = em_x270_v3020_resource,
 104         .id             = -1,
 105         .dev            = {
 106                 .platform_data = &em_x270_v3020_platdata,
 107         }
 108 };
 109
 110 /* NAND flash */
 111 #define GPIO_NAND_CS    (11)
 112 #define GPIO_NAND_RB    (56)
 113
 114 static inline void nand_cs_on(void)
 115 {
 116         GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
 117 }
 118
 119 static void nand_cs_off(void)
 120 {
 121         dsb();
 122
 123         GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
 124 }
 125
 126 /* hardware specific access to control-lines */
 127 static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
 128                                  unsigned int ctrl)
 129 {
 130         struct nand_chip *this = mtd->priv;
 131         unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
 132
 133         dsb();
 134
 135         if (ctrl & NAND_CTRL_CHANGE) {
 136                 if (ctrl & NAND_ALE)
 137                         nandaddr |=  (1 << 3);
 138                 else
 139                         nandaddr &= ~(1 << 3);
 140                 if (ctrl & NAND_CLE)
 141                         nandaddr |=  (1 << 2);
 142                 else
 143                         nandaddr &= ~(1 << 2);
 144                 if (ctrl & NAND_NCE)
 145                         nand_cs_on();
 146                 else
 147                         nand_cs_off();
 148         }
 149
 150         dsb();
 151         this->IO_ADDR_W = (void __iomem *)nandaddr;
 152         if (dat != NAND_CMD_NONE)
 153                 writel(dat, this->IO_ADDR_W);
 154
 155         dsb();
 156 }
 157
 158 /* read device ready pin */
 159 static int em_x270_nand_device_ready(struct mtd_info *mtd)
 160 {
 161         dsb();
 162
 163         return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
 164 }
 165
 166 static struct mtd_partition em_x270_partition_info[] = {
 167         [0] = {
 168                 .name   = "em_x270-0",
 169                 .offset = 0,
 170                 .size   = SZ_4M,
 171         },
 172         [1] = {
 173                 .name   = "em_x270-1",
 174                 .offset = MTDPART_OFS_APPEND,
 175                 .size   = MTDPART_SIZ_FULL
 176         },
 177 };
 178
 179 static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
 180
 181 struct platform_nand_data em_x270_nand_platdata = {
 182         .chip = {
 183                 .nr_chips = 1,
 184                 .chip_offset = 0,
 185                 .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
 186                 .partitions = em_x270_partition_info,
 187                 .chip_delay = 20,
 188                 .part_probe_types = em_x270_part_probes,
 189         },
 190         .ctrl = {
 191                 .hwcontrol = 0,
 192                 .dev_ready = em_x270_nand_device_ready,
 193                 .select_chip = 0,
 194                 .cmd_ctrl = em_x270_nand_cmd_ctl,
 195         },
 196 };
 197
 198 static struct resource em_x270_nand_resource[] = {
 199         [0] = {
 200                 .start = PXA_CS1_PHYS,
 201                 .end   = PXA_CS1_PHYS + 12,
 202                 .flags = IORESOURCE_MEM,
 203         },
 204 };
 205
 206 static struct platform_device em_x270_nand = {
 207         .name           = "gen_nand",
 208         .num_resources  = ARRAY_SIZE(em_x270_nand_resource),
 209         .resource       = em_x270_nand_resource,
 210         .id             = -1,
 211         .dev            = {
 212                 .platform_data = &em_x270_nand_platdata,
 213         }
 214 };
 215
 216 /* platform devices */
 217 static struct platform_device *platform_devices[] __initdata = {
 218         &em_x270_dm9k,
 219         &em_x270_audio,
 220         &em_x270_ts,
 221         &em_x270_rtc,
 222         &em_x270_nand,
 223 };
 224
 225
 226 /* PXA27x OHCI controller setup */
 227 static int em_x270_ohci_init(struct device *dev)
 228 {
 229         /* Set the Power Control Polarity Low */
 230         UHCHR = (UHCHR | UHCHR_PCPL) &
 231                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
 232
 233         /* enable port 2 transiever */
 234         UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 235
 236         return 0;
 237 }
 238
 239 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 240         .port_mode      = PMM_PERPORT_MODE,
 241         .init           = em_x270_ohci_init,
 242 };
 243
 244
 245 static int em_x270_mci_init(struct device *dev,
 246                             irq_handler_t em_x270_detect_int,
 247                             void *data)
 248 {
 249         int err;
 250
 251         /* setup GPIO for PXA27x MMC controller */
 252         pxa_gpio_mode(GPIO32_MMCCLK_MD);
 253         pxa_gpio_mode(GPIO112_MMCCMD_MD);
 254         pxa_gpio_mode(GPIO92_MMCDAT0_MD);
 255         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
 256         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
 257         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
 258
 259         /* EM-X270 uses GPIO13 as SD power enable */
 260         pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
 261
 262         err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
 263                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 264                           "MMC card detect", data);
 265         if (err) {
 266                 printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 267                        __FUNCTION__, err);
 268                 return err;
 269         }
 270
 271         return 0;
 272 }
 273
 274 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 275 {
 276         /*
 277            FIXME: current hardware implementation does not allow to
 278            enable/disable MMC power. This will be fixed in next HW releases,
 279            and we'll need to add implmentation here.
 280         */
 281         return;
 282 }
 283
 284 static void em_x270_mci_exit(struct device *dev, void *data)
 285 {
 286         free_irq(EM_X270_MMC_IRQ, data);
 287 }
 288
 289 static struct pxamci_platform_data em_x270_mci_platform_data = {
 290         .ocr_mask       = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
 291         .init           = em_x270_mci_init,
 292         .setpower       = em_x270_mci_setpower,
 293         .exit           = em_x270_mci_exit,
 294 };
 295
 296 /* LCD 480x640 */
 297 static struct pxafb_mode_info em_x270_lcd_mode = {
 298         .pixclock       = 50000,
 299         .bpp            = 16,
 300         .xres           = 480,
 301         .yres           = 640,
 302         .hsync_len      = 8,
 303         .vsync_len      = 2,
 304         .left_margin    = 8,
 305         .upper_margin   = 0,
 306         .right_margin   = 24,
 307         .lower_margin   = 4,
 308         .cmap_greyscale = 0,
 309 };
 310
 311 static struct pxafb_mach_info em_x270_lcd = {
 312         .modes          = &em_x270_lcd_mode,
 313         .num_modes      = 1,
 314         .cmap_inverse   = 0,
 315         .cmap_static    = 0,
 316         .lccr0          = LCCR0_PAS,
 317         .lccr3          = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
 318 };
 319
 320 static void __init em_x270_init(void)
 321 {
 322         /* setup LCD */
 323         set_pxa_fb_info(&em_x270_lcd);
 324
 325         /* register EM-X270 platform devices */
 326         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 327
 328         /* set MCI and OHCI platform parameters */
 329         pxa_set_mci_info(&em_x270_mci_platform_data);
 330         pxa_set_ohci_info(&em_x270_ohci_platform_data);
 331
 332         /* setup STUART GPIOs */
 333         pxa_gpio_mode(GPIO46_STRXD_MD);
 334         pxa_gpio_mode(GPIO47_STTXD_MD);
 335
 336         /* setup BTUART GPIOs */
 337         pxa_gpio_mode(GPIO42_BTRXD_MD);
 338         pxa_gpio_mode(GPIO43_BTTXD_MD);
 339         pxa_gpio_mode(GPIO44_BTCTS_MD);
 340         pxa_gpio_mode(GPIO45_BTRTS_MD);
 341
 342         /* Setup interrupt for dm9000 */
 343         set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
 344 }
 345
 346 MACHINE_START(EM_X270, "Compulab EM-x270")
 347         .boot_params    = 0xa0000100,
 348         .phys_io        = 0x40000000,
 349         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 350         .map_io         = pxa_map_io,
 351         .init_irq       = pxa27x_init_irq,
 352         .timer          = &pxa_timer,
 353         .init_machine   = em_x270_init,
 354 MACHINE_END