e1000: Add device IDs of blade version of the 82571 quad port
[pv_ops_mirror.git] / arch / arm / mach-pxa / lubbock.c
blobe70048fd00a53e28f08667a4331aad4c0258ea28
1 /*
2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
20 #include <linux/fb.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/ads7846.h>
27 #include <asm/arch/pxa2xx_spi.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <asm/hardware.h>
33 #include <asm/irq.h>
34 #include <asm/sizes.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
41 #include <asm/hardware/sa1111.h>
43 #include <asm/arch/pxa-regs.h>
44 #include <asm/arch/lubbock.h>
45 #include <asm/arch/udc.h>
46 #include <asm/arch/irda.h>
47 #include <asm/arch/pxafb.h>
48 #include <asm/arch/mmc.h>
50 #include "generic.h"
51 #include "devices.h"
54 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
56 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
58 unsigned long flags;
60 local_irq_save(flags);
61 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
62 local_irq_restore(flags);
64 EXPORT_SYMBOL(lubbock_set_misc_wr);
66 static unsigned long lubbock_irq_enabled;
68 static void lubbock_mask_irq(unsigned int irq)
70 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
71 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
74 static void lubbock_unmask_irq(unsigned int irq)
76 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
77 /* the irq can be acknowledged only if deasserted, so it's done here */
78 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
79 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
82 static struct irq_chip lubbock_irq_chip = {
83 .name = "FPGA",
84 .ack = lubbock_mask_irq,
85 .mask = lubbock_mask_irq,
86 .unmask = lubbock_unmask_irq,
89 static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
91 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
92 do {
93 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
94 if (likely(pending)) {
95 irq = LUBBOCK_IRQ(0) + __ffs(pending);
96 desc = irq_desc + irq;
97 desc_handle_irq(irq, desc);
99 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
100 } while (pending);
103 static void __init lubbock_init_irq(void)
105 int irq;
107 pxa25x_init_irq();
109 /* setup extra lubbock irqs */
110 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
111 set_irq_chip(irq, &lubbock_irq_chip);
112 set_irq_handler(irq, handle_level_irq);
113 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
116 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
117 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
120 #ifdef CONFIG_PM
122 static int lubbock_irq_resume(struct sys_device *dev)
124 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
125 return 0;
128 static struct sysdev_class lubbock_irq_sysclass = {
129 set_kset_name("cpld_irq"),
130 .resume = lubbock_irq_resume,
133 static struct sys_device lubbock_irq_device = {
134 .cls = &lubbock_irq_sysclass,
137 static int __init lubbock_irq_device_init(void)
139 int ret = sysdev_class_register(&lubbock_irq_sysclass);
140 if (ret == 0)
141 ret = sysdev_register(&lubbock_irq_device);
142 return ret;
145 device_initcall(lubbock_irq_device_init);
147 #endif
149 static int lubbock_udc_is_connected(void)
151 return (LUB_MISC_RD & (1 << 9)) == 0;
154 static struct pxa2xx_udc_mach_info udc_info __initdata = {
155 .udc_is_connected = lubbock_udc_is_connected,
156 // no D+ pullup; lubbock can't connect/disconnect in software
159 static struct platform_device lub_audio_device = {
160 .name = "pxa2xx-ac97",
161 .id = -1,
164 static struct resource sa1111_resources[] = {
165 [0] = {
166 .start = 0x10000000,
167 .end = 0x10001fff,
168 .flags = IORESOURCE_MEM,
170 [1] = {
171 .start = LUBBOCK_SA1111_IRQ,
172 .end = LUBBOCK_SA1111_IRQ,
173 .flags = IORESOURCE_IRQ,
177 static struct platform_device sa1111_device = {
178 .name = "sa1111",
179 .id = -1,
180 .num_resources = ARRAY_SIZE(sa1111_resources),
181 .resource = sa1111_resources,
184 static struct resource smc91x_resources[] = {
185 [0] = {
186 .name = "smc91x-regs",
187 .start = 0x0c000c00,
188 .end = 0x0c0fffff,
189 .flags = IORESOURCE_MEM,
191 [1] = {
192 .start = LUBBOCK_ETH_IRQ,
193 .end = LUBBOCK_ETH_IRQ,
194 .flags = IORESOURCE_IRQ,
196 [2] = {
197 .name = "smc91x-attrib",
198 .start = 0x0e000000,
199 .end = 0x0e0fffff,
200 .flags = IORESOURCE_MEM,
204 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
205 * you can select it to replace the ucb1400 by switching the touchscreen cable
206 * (to J5) and poking board registers (as done below). Else it's only useful
207 * for the temperature sensors.
209 static struct resource pxa_ssp_resources[] = {
210 [0] = {
211 .start = __PREG(SSCR0_P(1)),
212 .end = __PREG(SSCR0_P(1)) + 0x14,
213 .flags = IORESOURCE_MEM,
215 [1] = {
216 .start = IRQ_SSP,
217 .end = IRQ_SSP,
218 .flags = IORESOURCE_IRQ,
222 static struct pxa2xx_spi_master pxa_ssp_master_info = {
223 .ssp_type = PXA25x_SSP,
224 .clock_enable = CKEN_SSP,
225 .num_chipselect = 0,
228 static struct platform_device pxa_ssp = {
229 .name = "pxa2xx-spi",
230 .id = 1,
231 .resource = pxa_ssp_resources,
232 .num_resources = ARRAY_SIZE(pxa_ssp_resources),
233 .dev = {
234 .platform_data = &pxa_ssp_master_info,
238 static int lubbock_ads7846_pendown_state(void)
240 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
241 return 0;
244 static struct ads7846_platform_data ads_info = {
245 .model = 7846,
246 .vref_delay_usecs = 100, /* internal, no cap */
247 .get_pendown_state = lubbock_ads7846_pendown_state,
248 // .x_plate_ohms = 500, /* GUESS! */
249 // .y_plate_ohms = 500, /* GUESS! */
252 static void ads7846_cs(u32 command)
254 static const unsigned TS_nCS = 1 << 11;
255 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
258 static struct pxa2xx_spi_chip ads_hw = {
259 .tx_threshold = 1,
260 .rx_threshold = 2,
261 .cs_control = ads7846_cs,
264 static struct spi_board_info spi_board_info[] __initdata = { {
265 .modalias = "ads7846",
266 .platform_data = &ads_info,
267 .controller_data = &ads_hw,
268 .irq = LUBBOCK_BB_IRQ,
269 .max_speed_hz = 120000 /* max sample rate at 3V */
270 * 26 /* command + data + overhead */,
271 .bus_num = 1,
272 .chip_select = 0,
276 static struct platform_device smc91x_device = {
277 .name = "smc91x",
278 .id = -1,
279 .num_resources = ARRAY_SIZE(smc91x_resources),
280 .resource = smc91x_resources,
283 static struct resource flash_resources[] = {
284 [0] = {
285 .start = 0x00000000,
286 .end = SZ_64M - 1,
287 .flags = IORESOURCE_MEM,
289 [1] = {
290 .start = 0x04000000,
291 .end = 0x04000000 + SZ_64M - 1,
292 .flags = IORESOURCE_MEM,
296 static struct mtd_partition lubbock_partitions[] = {
298 .name = "Bootloader",
299 .size = 0x00040000,
300 .offset = 0,
301 .mask_flags = MTD_WRITEABLE /* force read-only */
303 .name = "Kernel",
304 .size = 0x00100000,
305 .offset = 0x00040000,
307 .name = "Filesystem",
308 .size = MTDPART_SIZ_FULL,
309 .offset = 0x00140000
313 static struct flash_platform_data lubbock_flash_data[2] = {
315 .map_name = "cfi_probe",
316 .parts = lubbock_partitions,
317 .nr_parts = ARRAY_SIZE(lubbock_partitions),
318 }, {
319 .map_name = "cfi_probe",
320 .parts = NULL,
321 .nr_parts = 0,
325 static struct platform_device lubbock_flash_device[2] = {
327 .name = "pxa2xx-flash",
328 .id = 0,
329 .dev = {
330 .platform_data = &lubbock_flash_data[0],
332 .resource = &flash_resources[0],
333 .num_resources = 1,
336 .name = "pxa2xx-flash",
337 .id = 1,
338 .dev = {
339 .platform_data = &lubbock_flash_data[1],
341 .resource = &flash_resources[1],
342 .num_resources = 1,
346 static struct platform_device *devices[] __initdata = {
347 &sa1111_device,
348 &lub_audio_device,
349 &smc91x_device,
350 &lubbock_flash_device[0],
351 &lubbock_flash_device[1],
352 &pxa_ssp,
355 static struct pxafb_mode_info sharp_lm8v31_mode = {
356 .pixclock = 270000,
357 .xres = 640,
358 .yres = 480,
359 .bpp = 16,
360 .hsync_len = 1,
361 .left_margin = 3,
362 .right_margin = 3,
363 .vsync_len = 1,
364 .upper_margin = 0,
365 .lower_margin = 0,
366 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
367 .cmap_greyscale = 0,
370 static struct pxafb_mach_info sharp_lm8v31 = {
371 .modes = &sharp_lm8v31_mode,
372 .num_modes = 1,
373 .cmap_inverse = 0,
374 .cmap_static = 0,
375 .lccr0 = LCCR0_SDS,
376 .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
379 #define MMC_POLL_RATE msecs_to_jiffies(1000)
381 static void lubbock_mmc_poll(unsigned long);
382 static irq_handler_t mmc_detect_int;
384 static struct timer_list mmc_timer = {
385 .function = lubbock_mmc_poll,
388 static void lubbock_mmc_poll(unsigned long data)
390 unsigned long flags;
392 /* clear any previous irq state, then ... */
393 local_irq_save(flags);
394 LUB_IRQ_SET_CLR &= ~(1 << 0);
395 local_irq_restore(flags);
397 /* poll until mmc/sd card is removed */
398 if (LUB_IRQ_SET_CLR & (1 << 0))
399 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
400 else {
401 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
402 enable_irq(LUBBOCK_SD_IRQ);
406 static irqreturn_t lubbock_detect_int(int irq, void *data)
408 /* IRQ is level triggered; disable, and poll for removal */
409 disable_irq(irq);
410 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
412 return mmc_detect_int(irq, data);
415 static int lubbock_mci_init(struct device *dev,
416 irq_handler_t detect_int,
417 void *data)
419 /* setup GPIO for PXA25x MMC controller */
420 pxa_gpio_mode(GPIO6_MMCCLK_MD);
421 pxa_gpio_mode(GPIO8_MMCCS0_MD);
423 /* detect card insert/eject */
424 mmc_detect_int = detect_int;
425 init_timer(&mmc_timer);
426 mmc_timer.data = (unsigned long) data;
427 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
428 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
431 static int lubbock_mci_get_ro(struct device *dev)
433 return (LUB_MISC_RD & (1 << 2)) != 0;
436 static void lubbock_mci_exit(struct device *dev, void *data)
438 free_irq(LUBBOCK_SD_IRQ, data);
439 del_timer_sync(&mmc_timer);
442 static struct pxamci_platform_data lubbock_mci_platform_data = {
443 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
444 .detect_delay = 1,
445 .init = lubbock_mci_init,
446 .get_ro = lubbock_mci_get_ro,
447 .exit = lubbock_mci_exit,
450 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
452 unsigned long flags;
454 local_irq_save(flags);
455 if (mode & IR_SIRMODE) {
456 LUB_MISC_WR &= ~(1 << 4);
457 } else if (mode & IR_FIRMODE) {
458 LUB_MISC_WR |= 1 << 4;
460 local_irq_restore(flags);
463 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
464 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
465 .transceiver_mode = lubbock_irda_transceiver_mode,
468 static void __init lubbock_init(void)
470 int flashboot = (LUB_CONF_SWITCHES & 1);
472 pxa_set_udc_info(&udc_info);
473 set_pxa_fb_info(&sharp_lm8v31);
474 pxa_set_mci_info(&lubbock_mci_platform_data);
475 pxa_set_ficp_info(&lubbock_ficp_platform_data);
477 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
478 (BOOT_DEF & 1) ? 2 : 4;
479 /* Compensate for the nROMBT switch which swaps the flash banks */
480 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
481 flashboot?"Flash":"ROM", flashboot);
483 lubbock_flash_data[flashboot^1].name = "application-flash";
484 lubbock_flash_data[flashboot].name = "boot-rom";
485 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
487 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
490 static struct map_desc lubbock_io_desc[] __initdata = {
491 { /* CPLD */
492 .virtual = LUBBOCK_FPGA_VIRT,
493 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
494 .length = 0x00100000,
495 .type = MT_DEVICE
499 static void __init lubbock_map_io(void)
501 pxa_map_io();
502 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
504 /* SSP data pins */
505 pxa_gpio_mode(GPIO23_SCLK_MD);
506 pxa_gpio_mode(GPIO25_STXD_MD);
507 pxa_gpio_mode(GPIO26_SRXD_MD);
509 /* This enables the BTUART */
510 pxa_gpio_mode(GPIO42_BTRXD_MD);
511 pxa_gpio_mode(GPIO43_BTTXD_MD);
512 pxa_gpio_mode(GPIO44_BTCTS_MD);
513 pxa_gpio_mode(GPIO45_BTRTS_MD);
515 /* This is for the SMC chip select */
516 pxa_gpio_mode(GPIO79_nCS_3_MD);
518 /* setup sleep mode values */
519 PWER = 0x00000002;
520 PFER = 0x00000000;
521 PRER = 0x00000002;
522 PGSR0 = 0x00008000;
523 PGSR1 = 0x003F0202;
524 PGSR2 = 0x0001C000;
525 PCFR |= PCFR_OPDE;
528 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
529 /* Maintainer: MontaVista Software Inc. */
530 .phys_io = 0x40000000,
531 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
532 .map_io = lubbock_map_io,
533 .init_irq = lubbock_init_irq,
534 .timer = &pxa_timer,
535 .init_machine = lubbock_init,
536 MACHINE_END