arch/arm/mach-realview/core.c

   1 /*
   2  *  linux/arch/arm/mach-realview/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/init.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/sysdev.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/amba/bus.h>
  27 #include <linux/amba/clcd.h>
  28
  29 #include <asm/system.h>
  30 #include <asm/hardware.h>
  31 #include <asm/io.h>
  32 #include <asm/irq.h>
  33 #include <asm/leds.h>
  34 #include <asm/hardware/arm_timer.h>
  35 #include <asm/hardware/icst307.h>
  36
  37 #include <asm/mach/arch.h>
  38 #include <asm/mach/flash.h>
  39 #include <asm/mach/irq.h>
  40 #include <asm/mach/time.h>
  41 #include <asm/mach/map.h>
  42 #include <asm/mach/mmc.h>
  43
  44 #include <asm/hardware/gic.h>
  45
  46 #include "core.h"
  47 #include "clock.h"
  48
  49 #define REALVIEW_REFCOUNTER     (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
  50
  51 /*
  52  * This is the RealView sched_clock implementation.  This has
  53  * a resolution of 41.7ns, and a maximum value of about 179s.
  54  */
  55 unsigned long long sched_clock(void)
  56 {
  57         unsigned long long v;
  58
  59         v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
  60         do_div(v, 3);
  61
  62         return v;
  63 }
  64
  65
  66 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
  67
  68 static int realview_flash_init(void)
  69 {
  70         u32 val;
  71
  72         val = __raw_readl(REALVIEW_FLASHCTRL);
  73         val &= ~REALVIEW_FLASHPROG_FLVPPEN;
  74         __raw_writel(val, REALVIEW_FLASHCTRL);
  75
  76         return 0;
  77 }
  78
  79 static void realview_flash_exit(void)
  80 {
  81         u32 val;
  82
  83         val = __raw_readl(REALVIEW_FLASHCTRL);
  84         val &= ~REALVIEW_FLASHPROG_FLVPPEN;
  85         __raw_writel(val, REALVIEW_FLASHCTRL);
  86 }
  87
  88 static void realview_flash_set_vpp(int on)
  89 {
  90         u32 val;
  91
  92         val = __raw_readl(REALVIEW_FLASHCTRL);
  93         if (on)
  94                 val |= REALVIEW_FLASHPROG_FLVPPEN;
  95         else
  96                 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
  97         __raw_writel(val, REALVIEW_FLASHCTRL);
  98 }
  99
 100 static struct flash_platform_data realview_flash_data = {
 101         .map_name               = "cfi_probe",
 102         .width                  = 4,
 103         .init                   = realview_flash_init,
 104         .exit                   = realview_flash_exit,
 105         .set_vpp                = realview_flash_set_vpp,
 106 };
 107
 108 static struct resource realview_flash_resource = {
 109         .start                  = REALVIEW_FLASH_BASE,
 110         .end                    = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
 111         .flags                  = IORESOURCE_MEM,
 112 };
 113
 114 struct platform_device realview_flash_device = {
 115         .name                   = "armflash",
 116         .id                     = 0,
 117         .dev                    = {
 118                 .platform_data  = &realview_flash_data,
 119         },
 120         .num_resources          = 1,
 121         .resource               = &realview_flash_resource,
 122 };
 123
 124 static struct resource realview_smc91x_resources[] = {
 125         [0] = {
 126                 .start          = REALVIEW_ETH_BASE,
 127                 .end            = REALVIEW_ETH_BASE + SZ_64K - 1,
 128                 .flags          = IORESOURCE_MEM,
 129         },
 130         [1] = {
 131                 .start          = IRQ_ETH,
 132                 .end            = IRQ_ETH,
 133                 .flags          = IORESOURCE_IRQ,
 134         },
 135 };
 136
 137 struct platform_device realview_smc91x_device = {
 138         .name           = "smc91x",
 139         .id             = 0,
 140         .num_resources  = ARRAY_SIZE(realview_smc91x_resources),
 141         .resource       = realview_smc91x_resources,
 142 };
 143
 144 static struct resource realview_i2c_resource = {
 145         .start          = REALVIEW_I2C_BASE,
 146         .end            = REALVIEW_I2C_BASE + SZ_4K - 1,
 147         .flags          = IORESOURCE_MEM,
 148 };
 149
 150 struct platform_device realview_i2c_device = {
 151         .name           = "versatile-i2c",
 152         .id             = -1,
 153         .num_resources  = 1,
 154         .resource       = &realview_i2c_resource,
 155 };
 156
 157 #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 158
 159 static unsigned int realview_mmc_status(struct device *dev)
 160 {
 161         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 162         u32 mask;
 163
 164         if (adev->res.start == REALVIEW_MMCI0_BASE)
 165                 mask = 1;
 166         else
 167                 mask = 2;
 168
 169         return readl(REALVIEW_SYSMCI) & mask;
 170 }
 171
 172 struct mmc_platform_data realview_mmc0_plat_data = {
 173         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 174         .status         = realview_mmc_status,
 175 };
 176
 177 struct mmc_platform_data realview_mmc1_plat_data = {
 178         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 179         .status         = realview_mmc_status,
 180 };
 181
 182 /*
 183  * Clock handling
 184  */
 185 static const struct icst307_params realview_oscvco_params = {
 186         .ref            = 24000,
 187         .vco_max        = 200000,
 188         .vd_min         = 4 + 8,
 189         .vd_max         = 511 + 8,
 190         .rd_min         = 1 + 2,
 191         .rd_max         = 127 + 2,
 192 };
 193
 194 static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
 195 {
 196         void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
 197         void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
 198         u32 val;
 199
 200         val = readl(sys_osc) & ~0x7ffff;
 201         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 202
 203         writel(0xa05f, sys_lock);
 204         writel(val, sys_osc);
 205         writel(0, sys_lock);
 206 }
 207
 208 struct clk realview_clcd_clk = {
 209         .name   = "CLCDCLK",
 210         .params = &realview_oscvco_params,
 211         .setvco = realview_oscvco_set,
 212 };
 213
 214 /*
 215  * CLCD support.
 216  */
 217 #define SYS_CLCD_NLCDIOON       (1 << 2)
 218 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 219 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 220 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 221 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 222 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 223 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 224 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 225 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 226
 227 static struct clcd_panel vga = {
 228         .mode           = {
 229                 .name           = "VGA",
 230                 .refresh        = 60,
 231                 .xres           = 640,
 232                 .yres           = 480,
 233                 .pixclock       = 39721,
 234                 .left_margin    = 40,
 235                 .right_margin   = 24,
 236                 .upper_margin   = 32,
 237                 .lower_margin   = 11,
 238                 .hsync_len      = 96,
 239                 .vsync_len      = 2,
 240                 .sync           = 0,
 241                 .vmode          = FB_VMODE_NONINTERLACED,
 242         },
 243         .width          = -1,
 244         .height         = -1,
 245         .tim2           = TIM2_BCD | TIM2_IPC,
 246         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 247         .bpp            = 16,
 248 };
 249
 250 static struct clcd_panel sanyo_3_8_in = {
 251         .mode           = {
 252                 .name           = "Sanyo QVGA",
 253                 .refresh        = 116,
 254                 .xres           = 320,
 255                 .yres           = 240,
 256                 .pixclock       = 100000,
 257                 .left_margin    = 6,
 258                 .right_margin   = 6,
 259                 .upper_margin   = 5,
 260                 .lower_margin   = 5,
 261                 .hsync_len      = 6,
 262                 .vsync_len      = 6,
 263                 .sync           = 0,
 264                 .vmode          = FB_VMODE_NONINTERLACED,
 265         },
 266         .width          = -1,
 267         .height         = -1,
 268         .tim2           = TIM2_BCD,
 269         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 270         .bpp            = 16,
 271 };
 272
 273 static struct clcd_panel sanyo_2_5_in = {
 274         .mode           = {
 275                 .name           = "Sanyo QVGA Portrait",
 276                 .refresh        = 116,
 277                 .xres           = 240,
 278                 .yres           = 320,
 279                 .pixclock       = 100000,
 280                 .left_margin    = 20,
 281                 .right_margin   = 10,
 282                 .upper_margin   = 2,
 283                 .lower_margin   = 2,
 284                 .hsync_len      = 10,
 285                 .vsync_len      = 2,
 286                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 287                 .vmode          = FB_VMODE_NONINTERLACED,
 288         },
 289         .width          = -1,
 290         .height         = -1,
 291         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 292         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 293         .bpp            = 16,
 294 };
 295
 296 static struct clcd_panel epson_2_2_in = {
 297         .mode           = {
 298                 .name           = "Epson QCIF",
 299                 .refresh        = 390,
 300                 .xres           = 176,
 301                 .yres           = 220,
 302                 .pixclock       = 62500,
 303                 .left_margin    = 3,
 304                 .right_margin   = 2,
 305                 .upper_margin   = 1,
 306                 .lower_margin   = 0,
 307                 .hsync_len      = 3,
 308                 .vsync_len      = 2,
 309                 .sync           = 0,
 310                 .vmode          = FB_VMODE_NONINTERLACED,
 311         },
 312         .width          = -1,
 313         .height         = -1,
 314         .tim2           = TIM2_BCD | TIM2_IPC,
 315         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 316         .bpp            = 16,
 317 };
 318
 319 /*
 320  * Detect which LCD panel is connected, and return the appropriate
 321  * clcd_panel structure.  Note: we do not have any information on
 322  * the required timings for the 8.4in panel, so we presently assume
 323  * VGA timings.
 324  */
 325 static struct clcd_panel *realview_clcd_panel(void)
 326 {
 327         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 328         struct clcd_panel *panel = &vga;
 329         u32 val;
 330
 331         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 332         if (val == SYS_CLCD_ID_SANYO_3_8)
 333                 panel = &sanyo_3_8_in;
 334         else if (val == SYS_CLCD_ID_SANYO_2_5)
 335                 panel = &sanyo_2_5_in;
 336         else if (val == SYS_CLCD_ID_EPSON_2_2)
 337                 panel = &epson_2_2_in;
 338         else if (val == SYS_CLCD_ID_VGA)
 339                 panel = &vga;
 340         else {
 341                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 342                         val);
 343                 panel = &vga;
 344         }
 345
 346         return panel;
 347 }
 348
 349 /*
 350  * Disable all display connectors on the interface module.
 351  */
 352 static void realview_clcd_disable(struct clcd_fb *fb)
 353 {
 354         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 355         u32 val;
 356
 357         val = readl(sys_clcd);
 358         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 359         writel(val, sys_clcd);
 360 }
 361
 362 /*
 363  * Enable the relevant connector on the interface module.
 364  */
 365 static void realview_clcd_enable(struct clcd_fb *fb)
 366 {
 367         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 368         u32 val;
 369
 370         /*
 371          * Enable the PSUs
 372          */
 373         val = readl(sys_clcd);
 374         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 375         writel(val, sys_clcd);
 376 }
 377
 378 static unsigned long framesize = SZ_1M;
 379
 380 static int realview_clcd_setup(struct clcd_fb *fb)
 381 {
 382         dma_addr_t dma;
 383
 384         fb->panel               = realview_clcd_panel();
 385
 386         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 387                                                     &dma, GFP_KERNEL);
 388         if (!fb->fb.screen_base) {
 389                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 390                 return -ENOMEM;
 391         }
 392
 393         fb->fb.fix.smem_start   = dma;
 394         fb->fb.fix.smem_len     = framesize;
 395
 396         return 0;
 397 }
 398
 399 static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 400 {
 401         return dma_mmap_writecombine(&fb->dev->dev, vma,
 402                                      fb->fb.screen_base,
 403                                      fb->fb.fix.smem_start,
 404                                      fb->fb.fix.smem_len);
 405 }
 406
 407 static void realview_clcd_remove(struct clcd_fb *fb)
 408 {
 409         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 410                               fb->fb.screen_base, fb->fb.fix.smem_start);
 411 }
 412
 413 struct clcd_board clcd_plat_data = {
 414         .name           = "RealView",
 415         .check          = clcdfb_check,
 416         .decode         = clcdfb_decode,
 417         .disable        = realview_clcd_disable,
 418         .enable         = realview_clcd_enable,
 419         .setup          = realview_clcd_setup,
 420         .mmap           = realview_clcd_mmap,
 421         .remove         = realview_clcd_remove,
 422 };
 423
 424 #ifdef CONFIG_LEDS
 425 #define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
 426
 427 void realview_leds_event(led_event_t ledevt)
 428 {
 429         unsigned long flags;
 430         u32 val;
 431
 432         local_irq_save(flags);
 433         val = readl(VA_LEDS_BASE);
 434
 435         switch (ledevt) {
 436         case led_idle_start:
 437                 val = val & ~REALVIEW_SYS_LED0;
 438                 break;
 439
 440         case led_idle_end:
 441                 val = val | REALVIEW_SYS_LED0;
 442                 break;
 443
 444         case led_timer:
 445                 val = val ^ REALVIEW_SYS_LED1;
 446                 break;
 447
 448         case led_halted:
 449                 val = 0;
 450                 break;
 451
 452         default:
 453                 break;
 454         }
 455
 456         writel(val, VA_LEDS_BASE);
 457         local_irq_restore(flags);
 458 }
 459 #endif  /* CONFIG_LEDS */
 460
 461 /*
 462  * Where is the timer (VA)?
 463  */
 464 #define TIMER0_VA_BASE           __io_address(REALVIEW_TIMER0_1_BASE)
 465 #define TIMER1_VA_BASE          (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
 466 #define TIMER2_VA_BASE           __io_address(REALVIEW_TIMER2_3_BASE)
 467 #define TIMER3_VA_BASE          (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
 468
 469 /*
 470  * How long is the timer interval?
 471  */
 472 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 473 #if TIMER_INTERVAL >= 0x100000
 474 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 475 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 476 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 477 #elif TIMER_INTERVAL >= 0x10000
 478 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 479 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 480 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 481 #else
 482 #define TIMER_RELOAD    (TIMER_INTERVAL)
 483 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 484 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 485 #endif
 486
 487 /*
 488  * Returns number of ms since last clock interrupt.  Note that interrupts
 489  * will have been disabled by do_gettimeoffset()
 490  */
 491 static unsigned long realview_gettimeoffset(void)
 492 {
 493         unsigned long ticks1, ticks2, status;
 494
 495         /*
 496          * Get the current number of ticks.  Note that there is a race
 497          * condition between us reading the timer and checking for
 498          * an interrupt.  We get around this by ensuring that the
 499          * counter has not reloaded between our two reads.
 500          */
 501         ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 502         do {
 503                 ticks1 = ticks2;
 504                 status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
 505                                      + ((IRQ_TIMERINT0_1 >> 5) << 2));
 506                 ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 507         } while (ticks2 > ticks1);
 508
 509         /*
 510          * Number of ticks since last interrupt.
 511          */
 512         ticks1 = TIMER_RELOAD - ticks2;
 513
 514         /*
 515          * Interrupt pending?  If so, we've reloaded once already.
 516          *
 517          * FIXME: Need to check this is effectively timer 0 that expires
 518          */
 519         if (status & IRQMASK_TIMERINT0_1)
 520                 ticks1 += TIMER_RELOAD;
 521
 522         /*
 523          * Convert the ticks to usecs
 524          */
 525         return TICKS2USECS(ticks1);
 526 }
 527
 528 /*
 529  * IRQ handler for the timer
 530  */
 531 static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
 532 {
 533         write_seqlock(&xtime_lock);
 534
 535         // ...clear the interrupt
 536         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 537
 538         timer_tick();
 539
 540 #if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS)
 541         smp_send_timer();
 542         update_process_times(user_mode(get_irq_regs()));
 543 #endif
 544
 545         write_sequnlock(&xtime_lock);
 546
 547         return IRQ_HANDLED;
 548 }
 549
 550 static struct irqaction realview_timer_irq = {
 551         .name           = "RealView Timer Tick",
 552         .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 553         .handler        = realview_timer_interrupt,
 554 };
 555
 556 /*
 557  * Set up timer interrupt, and return the current time in seconds.
 558  */
 559 static void __init realview_timer_init(void)
 560 {
 561         u32 val;
 562
 563         /*
 564          * set clock frequency:
 565          *      REALVIEW_REFCLK is 32KHz
 566          *      REALVIEW_TIMCLK is 1MHz
 567          */
 568         val = readl(__io_address(REALVIEW_SCTL_BASE));
 569         writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
 570                (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
 571                (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
 572                (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
 573                __io_address(REALVIEW_SCTL_BASE));
 574
 575         /*
 576          * Initialise to a known state (all timers off)
 577          */
 578         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 579         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 580         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 581         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 582
 583         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
 584         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
 585         writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
 586                TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 587
 588         /*
 589          * Make irqs happen for the system timer
 590          */
 591         setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
 592 }
 593
 594 struct sys_timer realview_timer = {
 595         .init           = realview_timer_init,
 596         .offset         = realview_gettimeoffset,
 597 };