e1000: Add device IDs of blade version of the 82571 quad port
[pv_ops_mirror.git] / arch / arm / plat-omap / mux.c
blob75211f20ccb3db11dc04347f991a30d82a5447a3
1 /*
2 * linux/arch/arm/plat-omap/mux.c
4 * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
6 * Copyright (C) 2003 - 2005 Nokia Corporation
8 * Written by Tony Lindgren <tony.lindgren@nokia.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <asm/system.h>
29 #include <asm/io.h>
30 #include <linux/spinlock.h>
31 #include <asm/arch/mux.h>
33 #ifdef CONFIG_OMAP_MUX
35 #define OMAP24XX_L4_BASE 0x48000000
36 #define OMAP24XX_PULL_ENA (1 << 3)
37 #define OMAP24XX_PULL_UP (1 << 4)
39 static struct pin_config * pin_table;
40 static unsigned long pin_table_sz;
42 extern struct pin_config * omap730_pins;
43 extern struct pin_config * omap1xxx_pins;
44 extern struct pin_config * omap24xx_pins;
46 int __init omap_mux_register(struct pin_config * pins, unsigned long size)
48 pin_table = pins;
49 pin_table_sz = size;
51 return 0;
55 * Sets the Omap MUX and PULL_DWN registers based on the table
57 int __init_or_module omap_cfg_reg(const unsigned long index)
59 static DEFINE_SPINLOCK(mux_spin_lock);
61 unsigned long flags;
62 struct pin_config *cfg;
63 unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
64 pull_orig = 0, pull = 0;
65 unsigned int mask, warn = 0;
67 if (!pin_table)
68 BUG();
70 if (index >= pin_table_sz) {
71 printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
72 index, pin_table_sz);
73 dump_stack();
74 return -ENODEV;
77 cfg = (struct pin_config *)&pin_table[index];
78 if (cpu_is_omap24xx()) {
79 u8 reg = 0;
81 reg |= cfg->mask & 0x7;
82 if (cfg->pull_val)
83 reg |= OMAP24XX_PULL_ENA;
84 if(cfg->pu_pd_val)
85 reg |= OMAP24XX_PULL_UP;
86 #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
88 u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
89 u8 debug = 0;
91 #ifdef CONFIG_OMAP_MUX_DEBUG
92 debug = cfg->debug;
93 #endif
94 warn = (orig != reg);
95 if (debug || warn)
96 printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
97 cfg->name,
98 OMAP24XX_L4_BASE + cfg->mux_reg,
99 orig, reg);
101 #endif
102 omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
104 return 0;
107 /* Check the mux register in question */
108 if (cfg->mux_reg) {
109 unsigned tmp1, tmp2;
111 spin_lock_irqsave(&mux_spin_lock, flags);
112 reg_orig = omap_readl(cfg->mux_reg);
114 /* The mux registers always seem to be 3 bits long */
115 mask = (0x7 << cfg->mask_offset);
116 tmp1 = reg_orig & mask;
117 reg = reg_orig & ~mask;
119 tmp2 = (cfg->mask << cfg->mask_offset);
120 reg |= tmp2;
122 if (tmp1 != tmp2)
123 warn = 1;
125 omap_writel(reg, cfg->mux_reg);
126 spin_unlock_irqrestore(&mux_spin_lock, flags);
129 /* Check for pull up or pull down selection on 1610 */
130 if (!cpu_is_omap15xx()) {
131 if (cfg->pu_pd_reg && cfg->pull_val) {
132 spin_lock_irqsave(&mux_spin_lock, flags);
133 pu_pd_orig = omap_readl(cfg->pu_pd_reg);
134 mask = 1 << cfg->pull_bit;
136 if (cfg->pu_pd_val) {
137 if (!(pu_pd_orig & mask))
138 warn = 1;
139 /* Use pull up */
140 pu_pd = pu_pd_orig | mask;
141 } else {
142 if (pu_pd_orig & mask)
143 warn = 1;
144 /* Use pull down */
145 pu_pd = pu_pd_orig & ~mask;
147 omap_writel(pu_pd, cfg->pu_pd_reg);
148 spin_unlock_irqrestore(&mux_spin_lock, flags);
152 /* Check for an associated pull down register */
153 if (cfg->pull_reg) {
154 spin_lock_irqsave(&mux_spin_lock, flags);
155 pull_orig = omap_readl(cfg->pull_reg);
156 mask = 1 << cfg->pull_bit;
158 if (cfg->pull_val) {
159 if (pull_orig & mask)
160 warn = 1;
161 /* Low bit = pull enabled */
162 pull = pull_orig & ~mask;
163 } else {
164 if (!(pull_orig & mask))
165 warn = 1;
166 /* High bit = pull disabled */
167 pull = pull_orig | mask;
170 omap_writel(pull, cfg->pull_reg);
171 spin_unlock_irqrestore(&mux_spin_lock, flags);
174 if (warn) {
175 #ifdef CONFIG_OMAP_MUX_WARNINGS
176 printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
177 #endif
180 #ifdef CONFIG_OMAP_MUX_DEBUG
181 if (cfg->debug || warn) {
182 printk("MUX: Setting register %s\n", cfg->name);
183 printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
184 cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
186 if (!cpu_is_omap15xx()) {
187 if (cfg->pu_pd_reg && cfg->pull_val) {
188 printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
189 cfg->pu_pd_name, cfg->pu_pd_reg,
190 pu_pd_orig, pu_pd);
194 if (cfg->pull_reg)
195 printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
196 cfg->pull_name, cfg->pull_reg, pull_orig, pull);
198 #endif
200 #ifdef CONFIG_OMAP_MUX_ERRORS
201 return warn ? -ETXTBSY : 0;
202 #else
203 return 0;
204 #endif
206 EXPORT_SYMBOL(omap_cfg_reg);
207 #else
208 #define omap_mux_init() do {} while(0)
209 #define omap_cfg_reg(x) do {} while(0)
210 #endif /* CONFIG_OMAP_MUX */