e1000: Add device IDs of blade version of the 82571 quad port
[pv_ops_mirror.git] / net / core / gen_estimator.c
blob590a767b029c15e82886bfcb49574dcfdbc7ba1e
1 /*
2 * net/sched/gen_estimator.c Simple rate estimator.
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version
7 * 2 of the License, or (at your option) any later version.
9 * Authors: Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
11 * Changes:
12 * Jamal Hadi Salim - moved it to net/core and reshulfed
13 * names to make it usable in general net subsystem.
16 #include <asm/uaccess.h>
17 #include <asm/system.h>
18 #include <asm/bitops.h>
19 #include <linux/module.h>
20 #include <linux/types.h>
21 #include <linux/kernel.h>
22 #include <linux/jiffies.h>
23 #include <linux/string.h>
24 #include <linux/mm.h>
25 #include <linux/socket.h>
26 #include <linux/sockios.h>
27 #include <linux/in.h>
28 #include <linux/errno.h>
29 #include <linux/interrupt.h>
30 #include <linux/netdevice.h>
31 #include <linux/skbuff.h>
32 #include <linux/rtnetlink.h>
33 #include <linux/init.h>
34 #include <net/sock.h>
35 #include <net/gen_stats.h>
38 This code is NOT intended to be used for statistics collection,
39 its purpose is to provide a base for statistical multiplexing
40 for controlled load service.
41 If you need only statistics, run a user level daemon which
42 periodically reads byte counters.
44 Unfortunately, rate estimation is not a very easy task.
45 F.e. I did not find a simple way to estimate the current peak rate
46 and even failed to formulate the problem 8)8)
48 So I preferred not to built an estimator into the scheduler,
49 but run this task separately.
50 Ideally, it should be kernel thread(s), but for now it runs
51 from timers, which puts apparent top bounds on the number of rated
52 flows, has minimal overhead on small, but is enough
53 to handle controlled load service, sets of aggregates.
55 We measure rate over A=(1<<interval) seconds and evaluate EWMA:
57 avrate = avrate*(1-W) + rate*W
59 where W is chosen as negative power of 2: W = 2^(-ewma_log)
61 The resulting time constant is:
63 T = A/(-ln(1-W))
66 NOTES.
68 * The stored value for avbps is scaled by 2^5, so that maximal
69 rate is ~1Gbit, avpps is scaled by 2^10.
71 * Minimal interval is HZ/4=250msec (it is the greatest common divisor
72 for HZ=100 and HZ=1024 8)), maximal interval
73 is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
74 are too expensive, longer ones can be implemented
75 at user level painlessly.
78 #define EST_MAX_INTERVAL 5
80 struct gen_estimator
82 struct list_head list;
83 struct gnet_stats_basic *bstats;
84 struct gnet_stats_rate_est *rate_est;
85 spinlock_t *stats_lock;
86 int ewma_log;
87 u64 last_bytes;
88 u32 last_packets;
89 u32 avpps;
90 u32 avbps;
91 struct rcu_head e_rcu;
94 struct gen_estimator_head
96 struct timer_list timer;
97 struct list_head list;
100 static struct gen_estimator_head elist[EST_MAX_INTERVAL+1];
102 /* Protects against NULL dereference */
103 static DEFINE_RWLOCK(est_lock);
105 static void est_timer(unsigned long arg)
107 int idx = (int)arg;
108 struct gen_estimator *e;
110 rcu_read_lock();
111 list_for_each_entry_rcu(e, &elist[idx].list, list) {
112 u64 nbytes;
113 u32 npackets;
114 u32 rate;
116 spin_lock(e->stats_lock);
117 read_lock(&est_lock);
118 if (e->bstats == NULL)
119 goto skip;
121 nbytes = e->bstats->bytes;
122 npackets = e->bstats->packets;
123 rate = (nbytes - e->last_bytes)<<(7 - idx);
124 e->last_bytes = nbytes;
125 e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
126 e->rate_est->bps = (e->avbps+0xF)>>5;
128 rate = (npackets - e->last_packets)<<(12 - idx);
129 e->last_packets = npackets;
130 e->avpps += ((long)rate - (long)e->avpps) >> e->ewma_log;
131 e->rate_est->pps = (e->avpps+0x1FF)>>10;
132 skip:
133 read_unlock(&est_lock);
134 spin_unlock(e->stats_lock);
137 if (!list_empty(&elist[idx].list))
138 mod_timer(&elist[idx].timer, jiffies + ((HZ<<idx)/4));
139 rcu_read_unlock();
143 * gen_new_estimator - create a new rate estimator
144 * @bstats: basic statistics
145 * @rate_est: rate estimator statistics
146 * @stats_lock: statistics lock
147 * @opt: rate estimator configuration TLV
149 * Creates a new rate estimator with &bstats as source and &rate_est
150 * as destination. A new timer with the interval specified in the
151 * configuration TLV is created. Upon each interval, the latest statistics
152 * will be read from &bstats and the estimated rate will be stored in
153 * &rate_est with the statistics lock grabed during this period.
155 * Returns 0 on success or a negative error code.
157 * NOTE: Called under rtnl_mutex
159 int gen_new_estimator(struct gnet_stats_basic *bstats,
160 struct gnet_stats_rate_est *rate_est,
161 spinlock_t *stats_lock,
162 struct rtattr *opt)
164 struct gen_estimator *est;
165 struct gnet_estimator *parm = RTA_DATA(opt);
166 int idx;
168 if (RTA_PAYLOAD(opt) < sizeof(*parm))
169 return -EINVAL;
171 if (parm->interval < -2 || parm->interval > 3)
172 return -EINVAL;
174 est = kzalloc(sizeof(*est), GFP_KERNEL);
175 if (est == NULL)
176 return -ENOBUFS;
178 idx = parm->interval + 2;
179 est->bstats = bstats;
180 est->rate_est = rate_est;
181 est->stats_lock = stats_lock;
182 est->ewma_log = parm->ewma_log;
183 est->last_bytes = bstats->bytes;
184 est->avbps = rate_est->bps<<5;
185 est->last_packets = bstats->packets;
186 est->avpps = rate_est->pps<<10;
188 if (!elist[idx].timer.function) {
189 INIT_LIST_HEAD(&elist[idx].list);
190 setup_timer(&elist[idx].timer, est_timer, idx);
193 if (list_empty(&elist[idx].list))
194 mod_timer(&elist[idx].timer, jiffies + ((HZ<<idx)/4));
196 list_add_rcu(&est->list, &elist[idx].list);
197 return 0;
200 static void __gen_kill_estimator(struct rcu_head *head)
202 struct gen_estimator *e = container_of(head,
203 struct gen_estimator, e_rcu);
204 kfree(e);
208 * gen_kill_estimator - remove a rate estimator
209 * @bstats: basic statistics
210 * @rate_est: rate estimator statistics
212 * Removes the rate estimator specified by &bstats and &rate_est
213 * and deletes the timer.
215 * NOTE: Called under rtnl_mutex
217 void gen_kill_estimator(struct gnet_stats_basic *bstats,
218 struct gnet_stats_rate_est *rate_est)
220 int idx;
221 struct gen_estimator *e, *n;
223 for (idx=0; idx <= EST_MAX_INTERVAL; idx++) {
225 /* Skip non initialized indexes */
226 if (!elist[idx].timer.function)
227 continue;
229 list_for_each_entry_safe(e, n, &elist[idx].list, list) {
230 if (e->rate_est != rate_est || e->bstats != bstats)
231 continue;
233 write_lock_bh(&est_lock);
234 e->bstats = NULL;
235 write_unlock_bh(&est_lock);
237 list_del_rcu(&e->list);
238 call_rcu(&e->e_rcu, __gen_kill_estimator);
244 * gen_replace_estimator - replace rate estimator configruation
245 * @bstats: basic statistics
246 * @rate_est: rate estimator statistics
247 * @stats_lock: statistics lock
248 * @opt: rate estimator configuration TLV
250 * Replaces the configuration of a rate estimator by calling
251 * gen_kill_estimator() and gen_new_estimator().
253 * Returns 0 on success or a negative error code.
256 gen_replace_estimator(struct gnet_stats_basic *bstats,
257 struct gnet_stats_rate_est *rate_est, spinlock_t *stats_lock,
258 struct rtattr *opt)
260 gen_kill_estimator(bstats, rate_est);
261 return gen_new_estimator(bstats, rate_est, stats_lock, opt);
265 EXPORT_SYMBOL(gen_kill_estimator);
266 EXPORT_SYMBOL(gen_new_estimator);
267 EXPORT_SYMBOL(gen_replace_estimator);