fs/jffs2/background.c

   1 /*
   2  * JFFS2 -- Journalling Flash File System, Version 2.
   3  *
   4  * Copyright © 2001-2007 Red Hat, Inc.
   5  *
   6  * Created by David Woodhouse <dwmw2@infradead.org>
   7  *
   8  * For licensing information, see the file 'LICENCE' in this directory.
   9  *
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/jffs2.h>
  14 #include <linux/mtd/mtd.h>
  15 #include <linux/completion.h>
  16 #include <linux/sched.h>
  17 #include <linux/freezer.h>
  18 #include "nodelist.h"
  19
  20
  21 static int jffs2_garbage_collect_thread(void *);
  22
  23 void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
  24 {
  25         spin_lock(&c->erase_completion_lock);
  26         if (c->gc_task && jffs2_thread_should_wake(c))
  27                 send_sig(SIGHUP, c->gc_task, 1);
  28         spin_unlock(&c->erase_completion_lock);
  29 }
  30
  31 /* This must only ever be called when no GC thread is currently running */
  32 int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c)
  33 {
  34         pid_t pid;
  35         int ret = 0;
  36
  37         BUG_ON(c->gc_task);
  38
  39         init_completion(&c->gc_thread_start);
  40         init_completion(&c->gc_thread_exit);
  41
  42         pid = kernel_thread(jffs2_garbage_collect_thread, c, CLONE_FS|CLONE_FILES);
  43         if (pid < 0) {
  44                 printk(KERN_WARNING "fork failed for JFFS2 garbage collect thread: %d\n", -pid);
  45                 complete(&c->gc_thread_exit);
  46                 ret = pid;
  47         } else {
  48                 /* Wait for it... */
  49                 D1(printk(KERN_DEBUG "JFFS2: Garbage collect thread is pid %d\n", pid));
  50                 wait_for_completion(&c->gc_thread_start);
  51         }
  52
  53         return ret;
  54 }
  55
  56 void jffs2_stop_garbage_collect_thread(struct jffs2_sb_info *c)
  57 {
  58         int wait = 0;
  59         spin_lock(&c->erase_completion_lock);
  60         if (c->gc_task) {
  61                 D1(printk(KERN_DEBUG "jffs2: Killing GC task %d\n", c->gc_task->pid));
  62                 send_sig(SIGKILL, c->gc_task, 1);
  63                 wait = 1;
  64         }
  65         spin_unlock(&c->erase_completion_lock);
  66         if (wait)
  67                 wait_for_completion(&c->gc_thread_exit);
  68 }
  69
  70 static int jffs2_garbage_collect_thread(void *_c)
  71 {
  72         struct jffs2_sb_info *c = _c;
  73
  74         daemonize("jffs2_gcd_mtd%d", c->mtd->index);
  75         allow_signal(SIGKILL);
  76         allow_signal(SIGSTOP);
  77         allow_signal(SIGCONT);
  78
  79         c->gc_task = current;
  80         complete(&c->gc_thread_start);
  81
  82         set_user_nice(current, 10);
  83
  84         for (;;) {
  85                 allow_signal(SIGHUP);
  86
  87                 if (!jffs2_thread_should_wake(c)) {
  88                         set_current_state (TASK_INTERRUPTIBLE);
  89                         D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread sleeping...\n"));
  90                         /* Yes, there's a race here; we checked jffs2_thread_should_wake()
  91                            before setting current->state to TASK_INTERRUPTIBLE. But it doesn't
  92                            matter - We don't care if we miss a wakeup, because the GC thread
  93                            is only an optimisation anyway. */
  94                         schedule();
  95                 }
  96
  97                 if (try_to_freeze())
  98                         continue;
  99
 100                 /* This thread is purely an optimisation. But if it runs when
 101                    other things could be running, it actually makes things a
 102                    lot worse. Use yield() and put it at the back of the runqueue
 103                    every time. Especially during boot, pulling an inode in
 104                    with read_inode() is much preferable to having the GC thread
 105                    get there first. */
 106                 yield();
 107
 108                 /* Put_super will send a SIGKILL and then wait on the sem.
 109                  */
 110                 while (signal_pending(current)) {
 111                         siginfo_t info;
 112                         unsigned long signr;
 113
 114                         signr = dequeue_signal_lock(current, &current->blocked, &info);
 115
 116                         switch(signr) {
 117                         case SIGSTOP:
 118                                 D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGSTOP received.\n"));
 119                                 set_current_state(TASK_STOPPED);
 120                                 schedule();
 121                                 break;
 122
 123                         case SIGKILL:
 124                                 D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGKILL received.\n"));
 125                                 goto die;
 126
 127                         case SIGHUP:
 128                                 D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGHUP received.\n"));
 129                                 break;
 130                         default:
 131                                 D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): signal %ld received\n", signr));
 132                         }
 133                 }
 134                 /* We don't want SIGHUP to interrupt us. STOP and KILL are OK though. */
 135                 disallow_signal(SIGHUP);
 136
 137                 D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): pass\n"));
 138                 if (jffs2_garbage_collect_pass(c) == -ENOSPC) {
 139                         printk(KERN_NOTICE "No space for garbage collection. Aborting GC thread\n");
 140                         goto die;
 141                 }
 142         }
 143  die:
 144         spin_lock(&c->erase_completion_lock);
 145         c->gc_task = NULL;
 146         spin_unlock(&c->erase_completion_lock);
 147         complete_and_exit(&c->gc_thread_exit, 0);
 148 }