Last-minute fix for Jim H: don't die after del sys.stdout

[python/dscho.git] / Mac / scripts / errors.txt

-32768  svTempDisable   Temporarily disable card but run primary init.
-32640  svDisabled      Reserve range -32640 to -32768 for Apple temp disables.
-32615  fontNotOutlineErr       bitmap font passed to routine that does outlines only
-20002  invalidIndexErr The recordIndex parameter is not valid.
-20001  recordDataTooBigErr     The record data is bigger than buffer size (1024 bytes).
-20000  unknownInsertModeErr    There is no such an insert mode.
-13005  pmRecvEndErr    during receive, pmgr did not finish hs configured for this connection
-13004  pmRecvStartErr  during receive, pmgr did not start hs
-13003  pmSendEndErr    during send, pmgr did not finish hs
-13002  pmSendStartErr  during send, pmgr did not start hs
-13001  pmReplyTOErr    Timed out waiting for reply
-13000  pmBusyErr       Power Mgr never ready to start handshake
-11005  pictureDataErr  the picture data was invalid
-11004  colorsRequestedErr      the number of colors requested was illegal
-11003  cantLoadPickMethodErr   unable to load the custom pick proc
-11002  pictInfoVerbErr the passed verb was invalid
-11001  pictInfoIDErr   the internal consistancy check for the PictInfoID is wrong
-11000  pictInfoVersionErr      wrong version of the PictInfo structure
-10116  telNotEnoughdspBW       not enough real-time for allocation
-10115  telBadSampleRate        incompatible sample rate
-10114  telBadSWErr     Software not installed properly
-10113  telDetAlreadyOn detection is already turned on
-10112  telAutoAnsNotOn autoAnswer in not turned on
-10111  telValidateFailed       telValidate failed
-10110  telBadProcID    invalid procID
-10109  telDeviceNotFound       device not found
-10108  telBadCodeResource      code resource not found
-10107  telInitFailed   initialization failed
-10106  telNoCommFolder Communications/Extensions Ÿ not found
-10103  telUnknownErr   unable to set config
-10102  telNoSuchTool   unable to find tool with name specified
-10091  telBadFunction  bad msgCode specified
-10090  telPBErr        parameter block error, bad format
-10082  telCANotDeflectable     CA not "deflectable"
-10081  telCANotRejectable      CA not "rejectable"
-10080  telCANotAcceptable      CA not "acceptable"
-10072  telTermNotOpen  terminal not opened via TELOpenTerm
-10071  telStillNeeded  terminal driver still needed by someone else
-10070  telAlreadyOpen  terminal already open
-10064  telNoCallbackRef        no call back reference was specified, but is required
-10063  telDisplayModeNotSupp   display mode not supported by tool
-10062  telBadDisplayMode       bad display mode specified
-10061  telFwdTypeNotSupp       forward type not supported by tool
-10060  telDNTypeNotSupp        DN type not supported by tool
-10059  telBadRate      bad rate specified
-10058  telBadBearerType        bad bearerType specified
-10057  telBadSelect    unable to select or deselect DN
-10056  telBadParkID    bad park id specified
-10055  telBadPickupGroupID     bad pickup group ID specified
-10054  telBadFwdType   bad fwdType specified
-10053  telBadFeatureID bad feature ID specified
-10052  telBadIntercomID        bad intercom ID specified
-10051  telBadPageID    bad page ID specified
-10050  telBadDNType    DN type invalid
-10047  telConfLimitExceeded    attempt to exceed switch conference limits
-10046  telCBErr        call back feature not set previously
-10045  telTransferRej  transfer request rejected
-10044  telTransferErr  transfer not prepared
-10043  telConfRej      conference request was rejected
-10042  telConfErr      conference was not prepared
-10041  telConfNoLimit  no limit was specified but required
-10040  telConfLimitErr limit specified is too high for this configuration
-10033  telFeatNotSupp  feature program call not supported by this tool
-10032  telFeatActive   feature already active
-10031  telFeatNotAvail feature subscribed but not available
-10030  telFeatNotSub   feature not subscribed
-10024  telDNDTypeNotSupp       DND type is not supported by this tool
-10023  telBadDNDType   bad DND type specified
-10022  telIntExtNotSupp        internal external type not supported by this tool
-10021  telBadIntExt    bad internal external error
-10020  telStateNotSupp device state not supported by tool
-10019  telBadStateErr  bad device state specified
-10018  telIndexNotSupp index not supported by this tool
-10017  telBadIndex     bad index specified
-10016  telAPattNotSupp alerting pattern not supported by tool
-10015  telBadAPattErr  bad alerting pattern specified
-10014  telVTypeNotSupp volume type not supported by this tool
-10013  telBadVTypeErr  bad volume type error
-10012  telBadLevelErr  bad volume level setting
-10011  telHTypeNotSupp hook type not supported by this tool
-10010  telBadHTypeErr  bad hook type specified
-10008  telNoOpenErr    unable to open terminal
-10007  telNoMemErr     no memory to allocate handle
-10006  telCAUnavail    a CA is not available
-10005  telBadProcErr   bad msgProc specified
-10004  telBadHandErr   bad handle specified
-10003  telBadCAErr     TELCAHandle not found or invalid
-10002  telBadDNErr     TELDNHandle not found or invalid
-10001  telBadTermErr   invalid TELHandle or handle not found
-6231   kDMMainDisplayCannotMoveErr     Trying to move main display (or a display mirrored to it)
-6230   kDMDisplayAlreadyInstalledErr   Attempt to add an already installed display.
-6229   kDMDisplayNotFoundErr   Could not find item (will someday remove).
-6228   kDMDriverNotDisplayMgrAwareErr  Video Driver does not support display manager.
-6227   kDMSWNotInitializedErr  Required software not initialized (eg windowmanager or display mgr).
-6226   kSysSWTooOld    Missing critical pieces of System Software.
-6225   kDMMirroringNotOn       Returned by all calls that need mirroring to be on to do their thing.
-6224   kDMCantBlock    Mirroring is already on, can¹t Block now (call DMUnMirror() first).
-6223   kDMMirroringBlocked     DMBlockMirroring() has been called.
-6222   kDMWrongNumberOfDisplays        Can only handle 2 displays for now.
-6221   kDMMirroringOnAlready   Returned by all calls that need mirroring to be off to do their thing.
-6220   kDMGenErr       Unexpected Error
-5553   gestaltLocationErr      gestalt function ptr wasn't in sysheap
-5552   gestaltDupSelectorErr   tried to add an entry that already existed
-5551   gestaltUndefSelectorErr undefined selector was passed to Gestalt
-5550   gestaltUnknownErr       value returned if Gestalt doesn't know the answer
-5502   envVersTooBig   Version bigger than call can handle
-5501   envBadVers      Version non-positive
-5500   envNotPresent   returned by glue.
-5044   afpInsideTrashErr       the folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder OR the folder is being moved to the trash and it contains a shared folder
-5043   afpInsideSharedErr      the folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder OR the folder contains a shared folder and is being moved into the descendent of a shared folder.
-5042   afpPwdExpiredErr        the password being used is too old: this requires the user to change the password before log-in can continue
-5041   afpPwdTooShortErr       the password being set is too short: there is a minimum length that must be met or exceeded
-5040   afpPwdSameErr   someone tried to change their password to the same password on a mantadory password change
-5033   afpContainsSharedErr    the folder being shared contains a shared folder
-5032   afpObjectLocked Object is M/R/D/W inhibited
-5031   afpVolLocked    Volume is Read-Only
-3026   couldNotParseSourceFileErr      Source document does not contain source type
-3025   invalidTranslationPathErr       Source type to destination type not a valid path
-2899   fragLastErrCode last reserved error code number
-2824   fragInvalidFragmentUsage        an application fragment or accellerated resource has no entry point or termination routine
-2823   fragArchError   fragment targeted for an unacceptable architecture
-2822   fragAppNotFound no application found in cfrg (for Process Manager)
-2821   fragUserInitProcErr     user intialization routine did not return noErr
-2820   fragCorruptErr  fragment container corrupted (known format)
-2819   fragConstErr    internal inconstistancy
-2818   fragMgrInitErr  error in initailization of this manager
-2817   fragLibConnErr  error connecting to library (error occured in sub prepare)
-2816   fragInitRtnUsageErr     boot library has initialization routine
-2815   fragInitLoop    circularity detected in mandatory initialization order
-2814   fragImportTooNew        import library was too new and therefore incompatible
-2813   fragImportTooOld        import library was too old and therefore incompatible
-2812   fragObjectInitSeqErr    order error during user initialization function invocation
-2811   fragNoContextIDs        no more context id¹s
-2810   fragNoAddrSpace out of memory in user's address space for loadable section
-2809   fragNoMem       out of memory for interal bookkeeping
-2808   fragUnused1     unused
-2807   fragHadUnresolveds      loaded fragment had "hard" unresolved imports
-2806   fragFormatUnknown       fragment container format unknown
-2805   fragDupRegLibName       registered name already in use
-2804   fragLibNotFound library name not found in Frag registry
-2803   fragSectionNotFound     section was not found
-2802   fragSymbolNotFound      symbol was not found in connection
-2801   fragConnectionIDNotFound        connecionID was not valid
-2800   fragContextNotFound     contextID was not valid
-2551   nrPathBufferTooSmall    buffer for path is too small
-2550   nrPathNotFound  a path component lookup failed
-2519   tsmUnknownErr   any other errors
-2518   tsmUnsupportedTypeErr   unSupported interface type error
-2517   tsmScriptHasNoIMErr     script has no imput method or is using old IM
-2516   tsmInputMethodIsOldErr  returned by GetDefaultInputMethod
-2515   tsmComponentAlreadyOpenErr      text service already opened for the document
-2514   tsmTSNotOpenErr text service is not open
-2513   tsmTSHasNoMenuErr       the text service has no menu
-2512   tsmUseInputWindowErr    not TSM aware because we are using input window
-2511   tsmDocumentOpenErr      there are open documents
-2510   tsmTextServiceNotFoundErr       no text service found
-2509   tsmCantOpenComponentErr can¹t open the component
-2508   tsmNoOpenTSErr  no open text service
-2507   tsmDocNotActiveErr      document is NOT active
-2506   tsmTSMDocBusyErr        document is still active
-2505   tsmInvalidDocIDErr      invalid TSM documentation id
-2504   tsmNeverRegisteredErr   app never registered error (not TSM aware)
-2503   tsmAlreadyRegisteredErr want to register again error
-2502   tsmNotAnAppErr  not an application error
-2209   badCallOrderErr Usually due to a status call being called prior to being setup first
-2208   noDMAErr        Can¹t do DMA digitizing (i.e. can't go to requested dest
-2207   badDepthErr     Can¹t digitize into this depth
-2206   notExactSizeErr Can¹t do exact size requested
-2205   noMoreKeyColorsErr      all key indexes in use
-2204   notExactMatrixErr       warning of bad matrix, digitizer did its best
-2203   matrixErr       bad matrix, digitizer did nothing
-2202   qtParamErr      bad input parameter (out of range, etc)
-2201   digiUnimpErr    feature unimplemented
-2056   soundSupportNotAvailableErr     QT for Windows error
-2055   noSoundTrackInMovieErr  QT for Windows error
-2054   noVideoTrackInMovieErr  QT for Windows error
-2022   cantCreateSingleForkFile        happens when file already exists
-1857   dragNotAcceptedErr      drag was not accepted by receiver
-1856   handlerNotFoundErr      handler not found
-1855   duplicateHandlerErr     handler already exists
-1854   cantGetFlavorErr        error while trying to get flavor data
-1853   duplicateFlavorErr      flavor type already exists
-1852   badDragFlavorErr        unknown flavor type
-1851   badDragItemErr  unknown drag item reference
-1850   badDragRefErr   unknown drag reference
-1762   errOSACantOpenComponent Can't connect to scripting system with that ID
-1761   errOSAComponentMismatch Parameters are from 2 different components
-1732   errAERecordingIsAlreadyOn       available only in version 1.0.1 or greater
-1731   errAEUnknownObjectType  available only in version 1.0.1 or greater
-1730   errAEEmptyListContainer Attempt to pass empty list as container to accessor
-1729   errAENegativeCount      CountProc returned negative value
-1728   errAENoSuchObject       e.g.,: specifier asked for the 3rd, but there are only 2. Basically, this indicates a run-time resolution error.
-1727   errAENotAnObjSpec       Param to AEResolve not of type 'obj '
-1726   errAEBadTestKey Test is neither typeLogicalDescriptor nor typeCompDescriptor
-1725   errAENoSuchLogical      Something other than AND, OR, or NOT
-1723   errAEAccessorNotFound   Accessor proc matching wantClass and containerType or wildcards not found
-1721   errAEWrongNumberArgs    Logical op kAENOT used with other than 1 term
-1720   errAEImpossibleRange    A range like 3rd to 2nd, or 1st to all.
-1719   errAEIllegalIndex       index is out of range in a put operation
-1718   errAEReplyNotArrived    the contents of the reply you are accessing have not arrived yet
-1717   errAEHandlerNotFound    no handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler
-1716   errAEUnknownAddressType the target address type is not known
-1715   errAEParamMissed        a required parameter was not accessed
-1714   errAENotASpecialFunction        there is no special function for/with this keyword
-1713   errAENoUserInteraction  no user interaction is allowed
-1712   errAETimeout    the AppleEvent timed out
-1711   errAEWaitCanceled       in AESend, the user cancelled out of wait loop for reply or receipt
-1710   errAEUnknownSendMode    mode wasn't NoReply, WaitReply, or QueueReply or Interaction level is unknown
-1709   errAEReplyNotValid      AEResetTimer was passed an invalid reply parameter
-1708   errAEEventNotHandled    the AppleEvent was not handled by any handler
-1707   errAENotAppleEvent      the event is not in AppleEvent format
-1706   errAENewerVersion       need newer version of the AppleEvent manager
-1705   errAEBadListItem        the specified list item does not exist
-1700   errAECoercionFail       bad parameter data or unable to coerce the data supplied
-1310   fsDataTooBigErr file or volume is too big for system
-1309   fileBoundsErr   file's EOF, offset, mark or size is too big
-1308   notARemountErr  when _Mount allows only remounts and doesn't get one
-1307   badFidErr       file id is dangling or doesn't match with the file number
-1306   sameFileErr     can't exchange a file with itself
-1305   desktopDamagedErr       desktop database files are corrupted
-1304   catChangedErr   the catalog has been modified
-1303   diffVolErr      files on different volumes
-1302   notAFileErr     directory specified
-1301   fidExists       file id already exists
-1300   fidNotFound     no file thread exists.
-1280   errRefNum       bad connection refNum
-1279   errAborted      control call was aborted
-1278   errState        bad connection state for this operation
-1277   errOpening      open connection request failed
-1276   errAttention    attention message too long
-1275   errFwdReset     read terminated by forward reset
-1274   errDSPQueueSize DSP Read/Write Queue Too small
-1273   errOpenDenied   open connection request was denied
-1075   aspNoAck        No ack on attention request (server err)
-1074   aspTooMany      Too many clients (server error)
-1073   aspSizeErr      Command block too big
-1072   aspSessClosed   Session closed
-1071   aspServerBusy   Server cannot open another session
-1070   aspParamErr     Parameter error
-1069   aspNoServers    No servers at that address
-1068   aspNoMoreSess   No more sessions on server
-1067   aspBufTooSmall  Buffer too small
-1066   aspBadVersNum   Server cannot support this ASP version
-1029   nbpNISErr       Error trying to open the NIS
-1028   nbpNotFound     Name not found on remove
-1027   nbpDuplicate    Duplicate name exists already
-1026   nbpConfDiff     Name confirmed at different socket
-1024   nbpBuffOvr      Buffer overflow in LookupName
-1000   noMaskFoundErr  Icon Utilties Error
-932    guestNotAllowedErr      destination port requires authentication
-931    badLocNameErr   location name malformed
-930    badServiceMethodErr     illegal service type, or not supported
-928    noUserRecErr    Invalid user reference number
-927    authFailErr     unable to authenticate user at destination
-926    noInformErr     PPCStart failed because destination did not have inform pending
-925    networkErr      An error has occured in the network, not too likely
-924    noUserRefErr    unable to create a new userRefNum
-923    notLoggedInErr  The default userRefNum does not yet exist
-922    noDefaultUserErr        user hasn't typed in owners name in Network Setup Control Pannel
-919    badPortNameErr  PPCPortRec malformed
-917    sessClosedErr   session was closed
-916    portClosedErr   port was closed
-915    noResponseErr   unable to contact destination
-914    noToolboxNameErr        A system resource is missing, not too likely
-913    noMachineNameErr        user hasn't named his Macintosh in the Network Setup Control Panel
-912    userRejectErr   Destination rejected the session request
-911    noUserNameErr   user name unknown on destination machine
-910    portNameExistsErr       port is already open (perhaps in another app)
-909    badReqErr       bad parameter or invalid state for operation
-908    noSessionErr    Invalid session reference number
-907    sessTableErr    Out of session tables, try again later
-906    destPortErr     Port does not exist at destination
-905    localOnlyErr    Network activity is currently disabled
-904    noGlobalsErr    The system is hosed, better re-boot
-903    noPortErr       Unable to open port or bad portRefNum
-902    nameTypeErr     Invalid or inappropriate locationKindSelector in locationName
-900    notInitErr      PPCToolBox not initialized
-863    hmCloseViewActive       Returned from HMRemoveBalloon if CloseView was active
-862    hmNoBalloonUp   Returned from HMRemoveBalloon if no balloon was visible when call was made
-861    hmOperationUnsupported  Returned from HMShowBalloon call if bad method passed to routine
-859    hmUnknownHelpType       Returned if help msg record contained a bad type
-858    hmWrongVersion  Returned if help mgr resource was the wrong version
-857    hmSkippedBalloon        Returned from calls if helpmsg specified a skip balloon
-855    hmHelpManagerNotInited  Returned from HMGetHelpMenuHandle if help menu not setup
-854    hmSameAsLastBalloon     Returned from HMShowMenuBalloon if menu & item is same as last time
-853    hmBalloonAborted        Returned if mouse was moving or mouse wasn't in window port rect
-850    hmHelpDisabled  Show Balloons mode was off, call to routine ignored
-813    rcDBPackNotInited       attempt to call other routine before InitDBPack
-812    rcDBWrongVersion        incompatible versions
-811    rcDBNoHandler   no app handler for specified data type
-810    rcDBBadAsyncPB  tried to kill a bad pb
-809    rcDBAsyncNotSupp        ddev does not support async calls
-808    rcDBBadDDEV     bad ddev specified on DBInit
-807    rcDBBadSessNum  bad session number for DBGetConnInfo
-626    noMMUErr        no MMU present
-625    cannotDeferErr  unable to defer additional functions
-624    interruptsMaskedErr     don¹t call with interrupts masked
-623    notLockedErr    specified range of memory is not locked
-622    cannotMakeContiguousErr cannot make specified range contiguous
-621    notHeldErr      specified range of memory is not held
-620    notEnoughMemoryErr      insufficient physical memory
-610    noUserInteractionAllowed        no user interaction allowed
-607    bufferIsSmall   error returns from Post and Accept
-606    appIsDaemon     app is BG-only, and launch flags disallow this
-605    appMemFullErr   application SIZE not big enough for launch
-604    hardwareConfigErr       hardware configuration not correct for call
-603    protocolErr     app made module calls in improper order
-602    appModeErr      memory mode is 32-bit, but app not 32-bit clean
-601    memFragErr      not enough room to launch app w/special requirements
-600    procNotFound    no eligible process with specified descriptor
-502    hwParamErr      bad selector for _HWPriv
-501    teScrapSizeErr  scrap item too big for text edit record
-492    exUserBreak     user debugger break; execute debugger commands on stack
-491    strUserBreak    user debugger break; display string on stack
-490    userBreak       user debugger break
-463    notThePublisherWrn      not the first registered publisher for that container
-462    containerAlreadyOpenWrn container already opened by this section
-461    containerNotFoundWrn    could not find editionContainer at this time
-460    multiplePublisherWrn    A Publisher is already registered for that container
-454    badSubPartErr   can not use sub parts in this release
-453    badEditionFileErr       edition file is corrupt
-452    notRegisteredSectionErr not a registered SectionRecord
-451    badSectionErr   not a valid SectionRecord
-450    editionMgrInitErr       edition manager not inited by this app
-417    btKeyAttrErr    There is no such a key attribute.
-416    btKeyLenErr     Maximum key length is too long or equal to zero.
-415    btRecNotFnd     Record cannot be found.
-414    btDupRecErr     Record already exists.
-413    btNoSpace       Can't allocate disk space.
-410    notBTree        The file is not a dictionary.
-400    gcrOnMFMErr     gcr format on high density media error
-360    slotNumErr      invalid slot # error
-351    smRecNotFnd     Record not found in the SRT.
-350    smSRTOvrFlErr   SRT over flow.
-349    smNoGoodOpens   No opens were successfull in the loop.
-348    smOffsetErr     Offset was too big (temporary error
-347    smByteLanesErr  NumByteLanes was determined to be zero.
-346    smBadsPtrErr    Bad pointer was passed to sCalcsPointer
-345    smsGetDrvrErr   Error occurred during _sGetDriver.
-344    smNoMoresRsrcs  No more sResources
-343    smDisDrvrNamErr Error occured during _sDisDrvrName.
-342    smGetDrvrNamErr Error occured during _sGetDrvrName.
-341    smCkStatusErr   Status of slot = fail.
-340    smBlkMoveErr    _BlockMove error
-339    smNewPErr       _NewPtr error
-338    smSelOOBErr     Selector out of bounds error
-337    smSlotOOBErr    Slot out of bounds error
-336    smNilsBlockErr  Nil sBlock error (Dont allocate and try to use a nil sBlock)
-335    smsPointerNil   LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information.
-334    smCPUErr        Code revision is wrong
-333    smCodeRevErr    Code revision is wrong
-332    smReservedErr   Reserved field not zero
-331    smBadsList      Bad sList: Id1 < Id2 < Id3 ...format is not followed.
-330    smBadRefId      Reference Id not found in List
-320    smBusErrTO      BusError time out.
-319    smBadBoardId    BoardId was wrong; re-init the PRAM record.
-318    smNoJmpTbl      SDM jump table could not be created.
-317    smInitTblVErr   An error occured while trying to initialize the Slot Resource Table.
-316    smInitStatVErr  The InitStatusV field was negative after primary or secondary init.
-315    smNoBoardId     No Board Id.
-314    smGetPRErr      Error occured during _sGetPRAMRec (See SIMStatus).
-313    smNoBoardSRsrc  No Board sResource.
-312    smDisposePErr   _DisposePointer error
-311    smFHBlkDispErr  Error occured during _sDisposePtr (Dispose of FHeader block).
-310    smFHBlockRdErr  Error occured during _sGetFHeader.
-309    smBLFieldBad    ByteLanes field was bad.
-308    smUnExBusErr    Unexpected BusError
-307    smResrvErr      Fatal reserved error. Resreved field <> 0.
-306    smNosInfoArray  No sInfoArray. Memory Mgr error.
-305    smDisabledSlot  This slot is disabled (-305 use to be smLWTstBad)
-304    smNoDir Directory offset is Nil
-303    smRevisionErr   Wrong revison level
-302    smFormatErr     FHeader Format is not Apple's
-301    smCRCFail       CRC check failed for declaration data
-300    smEmptySlot     No card in slot
-299    nmTypErr        wrong queue type
-293    smPriInitErr    Error; Cards could not be initialized.
-292    smPRAMInitErr   Error; Slot Resource Table could not be initialized.
-291    smSRTInitErr    Error; Slot Resource Table could not be initialized.
-290    smSDMInitErr    Error; SDM could not be initialized.
-261    midiInvalidCmdErr       command not supported for port type
-260    midiDupIDErr    duplicate client ID
-259    midiNameLenErr  name supplied is longer than 31 characters
-258    midiWriteErr    MIDIWritePacket couldn't write to all connected ports
-257    midiNoConErr    no connection exists between specified ports
-256    midiVConnectRmvd        pending virtual connection removed
-255    midiVConnectMade        pending virtual connection resolved
-254    midiVConnectErr pending virtual connection created
-253    midiTooManyConsErr      too many connections made
-252    midiTooManyPortsErr     too many ports already installed in the system
-251    midiNoPortErr   no port with that ID found
-250    midiNoClientErr no client with that ID found
-232    siUnknownQuality        invalid quality selector (returned by driver)
-231    siUnknownInfoType       invalid info type selector (returned by driver)
-230    siInputDeviceErr        input device hardware failure
-229    siBadRefNum     invalid input device reference number
-228    siBadDeviceName input device could not be opened
-227    siDeviceBusyErr input device already in use
-226    siInvalidSampleSize     invalid sample size
-225    siInvalidSampleRate     invalid sample rate
-224    siHardDriveTooSlow      hard drive too slow to record to disk
-223    siInvalidCompression    invalid compression type
-222    siNoBufferSpecified     returned by synchronous SPBRecord if nil buffer passed
-221    siBadSoundInDevice      invalid index passed to SoundInGetIndexedDevice
-220    siNoSoundInHardware     no Sound Input hardware
-212    noMoreRealTime  not enough CPU cycles left to add another task
-210    buffersTooSmall can not operate in the memory allowed
-209    channelBusy     the Channel is being used for a PFD already
-208    badFileFormat   was not type AIFF or was of bad format,corrupt
-207    notEnoughBufferSpace    could not allocate enough memory
-206    badFormat       Sound Manager Error Returns
-205    badChannel      Sound Manager Error Returns
-204    resProblem      Sound Manager Error Returns
-203    queueFull       Sound Manager Error Returns
-201    notEnoughHardwareErr    Sound Manager Error Returns
-200    noHardwareErr   Sound Manager Error Returns
-199    mapReadErr      map inconsistent with operation
-198    resAttrErr      attribute inconsistent with operation
-197    rmvRefFailed    RmveReference failed
-196    rmvResFailed    RmveResource failed
-195    addRefFailed    AddReference failed
-194    addResFailed    AddResource failed
-193    resFNotFound    Resource file not found
-192    resNotFound     Resource not found
-190    inputOutOfBounds        Offset of Count out of bounds
-189    writingPastEnd  Writing past end of file
-188    resourceInMemory        Resource already in memory
-186    CantDecompress  resource bent ("the bends") - can't decompress a compressed resource
-185    badExtResource  extended resource has a bad format.
-157    cDepthErr       invalid pixel depth
-156    cResErr invalid resolution for MakeITable
-155    cDevErr invalid type of graphics device
-154    cProtectErr     colorTable entry protection violation
-153    cRangeErr       range error on colorTable request
-152    cNoMemErr       failed to allocate memory for structure
-151    cTempMemErr     failed to allocate memory for temporary structures
-150    cMatchErr       Color2Index failed to find an index
-127    hMenuFindErr    could not find HMenu's parent in MenuKey
-126    mBarNFnd        system error code for MBDF not found
-125    updPixMemErr    insufficient memory to update a pixmap
-124    volGoneErr      Server volume has been disconnected.
-123    wrgVolTypErr    Wrong volume type error [operation not supported for MFS]
-122    badMovErr       Move into offspring error
-121    tmwdoErr        No free WDCB available
-120    dirNFErr        Directory not found
-117    memLockedErr    trying to move a locked block (MoveHHi)
-116    memSCErr        Size Check failed
-115    memBCErr        Block Check failed
-114    memPCErr        Pointer Check failed
-113    memAZErr        Address in zone check failed
-112    memPurErr       trying to purge a locked or non-purgeable block
-111    memWZErr        WhichZone failed (applied to free block)
-110    memAdrErr       address was odd; or out of range
-109    nilHandleErr    Master Pointer was NIL in HandleZone or other
-108    memFullErr      Not enough room in heap zone
-102    noTypeErr       No object of that type in scrap
-100    noScrapErr      No scrap exists error
-99     memROZWarn      soft error in ROZ
-98     portNotCf       driver Open error code (parameter RAM not configured for this connection)
-97     portInUse       driver Open error code (port is in use)
-96     portNotPwr      serial port not currently powered
-95     excessCollsns   excessive collisions on write
-94     lapProtErr      error in attaching/detaching protocol
-93     noBridgeErr     no network bridge for non-local send
-92     ddpLenErr       data length too big
-91     ddpSktErr       error in soket number
-90     breakRecd       Break received (SCC)
-89     rcvrErr SCC receiver error (framing; parity; OR)
-88     prInitErr       InitUtil found the parameter ram uninitialized
-87     prWrErr parameter ram written didn't read-verify
-86     clkWrErr        time written did not verify
-85     clkRdErr        unable to read same clock value twice
-84     firstDskErr     I/O System Errors
-83     fmt2Err can't get enough sync
-82     fmt1Err can't find sector 0 after track format
-81     sectNFErr       sector number never found on a track
-80     seekErr track number wrong on address mark
-79     spdAdjErr       unable to correctly adjust disk speed
-78     twoSideErr      tried to read 2nd side on a 1-sided drive
-77     initIWMErr      unable to initialize IWM
-76     tk0BadErr       track 0 detect doesn't change
-75     cantStepErr     step handshake failed
-74     wrUnderrun      write underrun occurred
-73     badDBtSlp       bad data mark bit slip nibbles
-72     badDCksum       bad data mark checksum
-71     noDtaMkErr      couldn't find a data mark header
-70     badBtSlpErr     bad addr mark bit slip nibbles
-69     badCksmErr      addr mark checksum didn't check
-68     dataVerErr      read verify compare failed
-67     noAdrMkErr      couldn't find valid addr mark
-66     fontSubErr      font substitution occured
-65     fontNotDeclared font not declared
-64     fontDecError    error during font declaration
-61     wrPermErr       write permissions error
-60     badMDBErr       bad master directory block
-59     fsRnErr file system internal error:during rename the old entry was deleted but could not be restored.
-58     extFSErr        volume in question belongs to an external fs
-57     noMacDskErr     not a mac diskette (sig bytes are wrong)
-56     nsDrvErr        no such drive (tried to mount a bad drive num)
-55     volOnLinErr     drive volume already on-line at MountVol
-54     permErr permissions error (on file open)
-53     volOffLinErr    volume not on line error (was Ejected)
-52     gfpErr  get file position error
-51     rfNumErr        refnum error
-50     paramErr        error in user parameter list
-49     opWrErr file already open with with write permission
-48     dupFNErr        duplicate filename (rename)
-47     fBsyErr File is busy (delete)
-46     vLckdErr        volume is locked
-45     fLckdErr        file is locked
-44     wPrErr  diskette is write protected.
-43     fnfErr  File not found
-42     tmfoErr too many files open
-41     mFulErr memory full (open) or file won't fit (load)
-40     posErr  tried to position to before start of file (r/w)
-39     eofErr  End of file
-38     fnOpnErr        File not open
-37     bdNamErr        there may be no bad names in the final system!
-36     ioErr   I/O error (bummers)
-35     nsvErr  no such volume
-34     dskFulErr       disk full
-33     dirFulErr       Directory full
-30     dceExtErr       dce extension error
-29     unitTblFullErr  unit table has no more entries
-28     notOpenErr      Couldn't rd/wr/ctl/sts cause driver not opened
-27     abortErr        IO call aborted by KillIO
-26     dInstErr        DrvrInstall couldn't find driver in resources
-25     dRemovErr       tried to remove an open driver
-24     closErr I/O System Errors
-23     openErr I/O System Errors
-22     unitEmptyErr    I/O System Errors
-21     badUnitErr      I/O System Errors
-20     writErr I/O System Errors
-19     readErr I/O System Errors
-18     statusErr       I/O System Errors
-17     controlErr      I/O System Errors
-13     dsExtensionsDisabled    say ³Extensions Disabled²
-12     dsHD20Installed say ³HD20 Startup²
-11     dsDisassemblerInstalled say ³Disassembler Installed²
-10     dsMacsBugInstalled      say ³MacsBug Installed²
-8      seNoDB  no debugger installed to handle debugger command
-5      SlpTypeErr      invalid queue element
-4      unimpErr        unimplemented core routine
-3      corErr  core routine number out of range
-2      vTypErr invalid queue element
-1      qErr    queue element not found during deletion
0       tsmComponentNoErr       component result = no error
1       EPERM   Operation not permitted
2       ENOENT  No such file or directory
3       ESRCH   No such process
4       EINTR   Interrupted system call
5       EIO     Input/output error
6       ENXIO   Device not configured
7       E2BIG   Argument list too long
8       ENOEXEC Exec format error
9       EBADF   Bad file descriptor
10      ECHILD  No child processes
11      EDEADLK Resource deadlock avoided
12      ENOMEM  Cannot allocate memory
13      EACCES  Permission denied
14      EFAULT  Bad address
15      ENOTBLK Block device required
16      EBUSY   Device busy
17      EEXIST  File exists
18      EXDEV   Cross-device link
19      ENODEV  Operation not supported by device
20      ENOTDIR Not a directory
21      EISDIR  Is a directory
22      EINVAL  Invalid argument
23      ENFILE  Too many open files in system
24      EMFILE  Too many open files
25      ENOTTY  Inappropriate ioctl for device
26      ETXTBSY Text file busy
27      EFBIG   File too large
28      ENOSPC  No space left on device
29      ESPIPE  Illegal seek
30      EROFS   Read-only file system
31      EMLINK  Too many links
32      EPIPE   Broken pipe
33      EDOM    Numerical argument out of domain
34      ERANGE  Result too large
35      EFPOS   File positioning error
36      ESIGPARM        Signal argument error
37      ENOMEM  Cannot allocate memory
38      EACCES  Permission denied
39      ENOENT  No such file or directory
40      ENOSYS  Function not implemented
41      EPROTOTYPE      Protocol wrong type for socket
42      ENOPROTOOPT     Protocol not available
43      EPROTONOSUPPORT Protocol not supported
44      ESOCKTNOSUPPORT Socket type not supported
45      EOPNOTSUPP      Operation not supported on socket
46      EPFNOSUPPORT    Protocol family not supported
47      EAFNOSUPPORT    Address family not supported by protocol family
48      EADDRINUSE      Address already in use
49      EADDRNOTAVAIL   Can't assign requested address
50      ENETDOWN        Network is down
51      ENETUNREACH     Network is unreachable
52      ENETRESET       Network dropped connection on reset
53      ECONNABORTED    Software caused connection abort
54      ECONNRESET      Connection reset by peer
55      ENOBUFS No buffer space available
56      EISCONN Socket is already connected
57      ENOTCONN        Socket is not connected
58      ESHUTDOWN       Can't send after socket shutdown
59      ETOOMANYREFS    Too many references: can't splice
60      ETIMEDOUT       Connection timed out
61      ECONNREFUSED    Connection refused
62      ELOOP   Too many levels of symbolic links
63      ENAMETOOLONG    File name too long
64      EHOSTDOWN       Host is down
65      EHOSTUNREACH    No route to host
66      ENOTEMPTY       Directory not empty
67      EPROCLIM        Too many processes
68      EUSERS  Too many users
69      EDQUOT  Disc quota exceeded
70      ESTALE  Stale NFS file handle
71      EREMOTE Too many levels of remote in path
72      EBADRPC RPC struct is bad
73      ERPCMISMATCH    RPC version wrong
74      EPROGUNAVAIL    RPC prog. not avail
75      EPROGMISMATCH   Program version wrong
76      EPROCUNAVAIL    Bad procedure for program
77      ENOLCK  No locks available
78      ENOSYS  Function not implemented
79      EFTYPE  Inappropriate file type or format
136     EINPROGRESS     Operation now in progress
137     EALREADY        Operation already in progress
138     ENOTSOCK        Socket operation on non-socket
139     EDESTADDRREQ    Destination address required
140     EMSGSIZE        Message too long