Fix build breakage when using VDE introduced by 4f1c942
[qemu-kvm/fedora.git] / hw / mainstone.c
blob151ea0e341a885ad76c0f29f5092c8b1bd752414
1 /*
2 * PXA270-based Intel Mainstone platforms.
4 * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
5 * <akuster@mvista.com>
7 * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
9 * This code is licensed under the GNU GPL v2.
11 #include "hw.h"
12 #include "pxa.h"
13 #include "arm-misc.h"
14 #include "net.h"
15 #include "devices.h"
16 #include "boards.h"
17 #include "mainstone.h"
18 #include "sysemu.h"
19 #include "flash.h"
21 static struct keymap map[0xE0] = {
22 [0 ... 0xDF] = { -1, -1 },
23 [0x1e] = {0,0}, /* a */
24 [0x30] = {0,1}, /* b */
25 [0x2e] = {0,2}, /* c */
26 [0x20] = {0,3}, /* d */
27 [0x12] = {0,4}, /* e */
28 [0x21] = {0,5}, /* f */
29 [0x22] = {1,0}, /* g */
30 [0x23] = {1,1}, /* h */
31 [0x17] = {1,2}, /* i */
32 [0x24] = {1,3}, /* j */
33 [0x25] = {1,4}, /* k */
34 [0x26] = {1,5}, /* l */
35 [0x32] = {2,0}, /* m */
36 [0x31] = {2,1}, /* n */
37 [0x18] = {2,2}, /* o */
38 [0x19] = {2,3}, /* p */
39 [0x10] = {2,4}, /* q */
40 [0x13] = {2,5}, /* r */
41 [0x1f] = {3,0}, /* s */
42 [0x14] = {3,1}, /* t */
43 [0x16] = {3,2}, /* u */
44 [0x2f] = {3,3}, /* v */
45 [0x11] = {3,4}, /* w */
46 [0x2d] = {3,5}, /* x */
47 [0x15] = {4,2}, /* y */
48 [0x2c] = {4,3}, /* z */
49 [0xc7] = {5,0}, /* Home */
50 [0x2a] = {5,1}, /* shift */
51 [0x39] = {5,2}, /* space */
52 [0x39] = {5,3}, /* space */
53 [0x1c] = {5,5}, /* enter */
54 [0xc8] = {6,0}, /* up */
55 [0xd0] = {6,1}, /* down */
56 [0xcb] = {6,2}, /* left */
57 [0xcd] = {6,3}, /* right */
60 enum mainstone_model_e { mainstone };
62 #define MAINSTONE_RAM 0x04000000
63 #define MAINSTONE_ROM 0x00800000
64 #define MAINSTONE_FLASH 0x02000000
66 static struct arm_boot_info mainstone_binfo = {
67 .loader_start = PXA2XX_SDRAM_BASE,
68 .ram_size = 0x04000000,
71 static void mainstone_common_init(ram_addr_t ram_size,
72 const char *kernel_filename,
73 const char *kernel_cmdline, const char *initrd_filename,
74 const char *cpu_model, enum mainstone_model_e model, int arm_id)
76 uint32_t sector_len = 256 * 1024;
77 target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
78 PXA2xxState *cpu;
79 qemu_irq *mst_irq;
80 int i, index;
82 if (!cpu_model)
83 cpu_model = "pxa270-c5";
85 /* Setup CPU & memory */
86 cpu = pxa270_init(mainstone_binfo.ram_size, cpu_model);
87 cpu_register_physical_memory(0, MAINSTONE_ROM,
88 qemu_ram_alloc(MAINSTONE_ROM) | IO_MEM_ROM);
90 /* Setup initial (reset) machine state */
91 cpu->env->regs[15] = mainstone_binfo.loader_start;
93 /* There are two 32MiB flash devices on the board */
94 for (i = 0; i < 2; i ++) {
95 index = drive_get_index(IF_PFLASH, 0, i);
96 if (index == -1) {
97 fprintf(stderr, "Two flash images must be given with the "
98 "'pflash' parameter\n");
99 exit(1);
102 if (!pflash_cfi01_register(mainstone_flash_base[i],
103 qemu_ram_alloc(MAINSTONE_FLASH),
104 drives_table[index].bdrv, sector_len,
105 MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0)) {
106 fprintf(stderr, "qemu: Error registering flash memory.\n");
107 exit(1);
111 mst_irq = mst_irq_init(cpu, MST_FPGA_PHYS, PXA2XX_PIC_GPIO_0);
113 /* setup keypad */
114 printf("map addr %p\n", &map);
115 pxa27x_register_keypad(cpu->kp, map, 0xe0);
117 /* MMC/SD host */
118 pxa2xx_mmci_handlers(cpu->mmc, NULL, mst_irq[MMC_IRQ]);
120 smc91c111_init(&nd_table[0], MST_ETH_PHYS, mst_irq[ETHERNET_IRQ]);
122 mainstone_binfo.kernel_filename = kernel_filename;
123 mainstone_binfo.kernel_cmdline = kernel_cmdline;
124 mainstone_binfo.initrd_filename = initrd_filename;
125 mainstone_binfo.board_id = arm_id;
126 arm_load_kernel(cpu->env, &mainstone_binfo);
129 static void mainstone_init(ram_addr_t ram_size,
130 const char *boot_device,
131 const char *kernel_filename, const char *kernel_cmdline,
132 const char *initrd_filename, const char *cpu_model)
134 mainstone_common_init(ram_size, kernel_filename,
135 kernel_cmdline, initrd_filename, cpu_model, mainstone, 0x196);
138 static QEMUMachine mainstone2_machine = {
139 .name = "mainstone",
140 .desc = "Mainstone II (PXA27x)",
141 .init = mainstone_init,
144 static void mainstone_machine_init(void)
146 qemu_register_machine(&mainstone2_machine);
149 machine_init(mainstone_machine_init);