qemu-kvm.h

   1 /*
   2  * qemu/kvm integration
   3  *
   4  * Copyright (C) 2006-2008 Qumranet Technologies
   5  *
   6  * Licensed under the terms of the GNU GPL version 2 or higher.
   7  */
   8 #ifndef THE_ORIGINAL_AND_TRUE_QEMU_KVM_H
   9 #define THE_ORIGINAL_AND_TRUE_QEMU_KVM_H
  10
  11 #include "cpu.h"
  12
  13 #include <signal.h>
  14
  15 #ifdef CONFIG_KVM
  16
  17 #if defined(__s390__)
  18 #include <asm/ptrace.h>
  19 #endif
  20
  21 #include <stdint.h>
  22
  23 #ifndef __user
  24 #define __user /* temporary, until installed via make headers_install */
  25 #endif
  26
  27 #include <linux/kvm.h>
  28
  29 #include <signal.h>
  30
  31 /* FIXME: share this number with kvm */
  32 /* FIXME: or dynamically alloc/realloc regions */
  33 #ifdef __s390__
  34 #define KVM_MAX_NUM_MEM_REGIONS 1u
  35 #define MAX_VCPUS 64
  36 #define LIBKVM_S390_ORIGIN (0UL)
  37 #elif defined(__ia64__)
  38 #define KVM_MAX_NUM_MEM_REGIONS 32u
  39 #define MAX_VCPUS 256
  40 #else
  41 #define KVM_MAX_NUM_MEM_REGIONS 32u
  42 #define MAX_VCPUS 16
  43 #endif
  44
  45 /* kvm abi verison variable */
  46 extern int kvm_abi;
  47
  48 /**
  49  * \brief The KVM context
  50  *
  51  * The verbose KVM context
  52  */
  53
  54 struct kvm_context {
  55         void *opaque;
  56         /// is dirty pages logging enabled for all regions or not
  57         int dirty_pages_log_all;
  58         /// do not create in-kernel irqchip if set
  59         int no_irqchip_creation;
  60         /// in-kernel irqchip status
  61         int irqchip_in_kernel;
  62         /// ioctl to use to inject interrupts
  63         int irqchip_inject_ioctl;
  64         /// do not create in-kernel pit if set
  65         int no_pit_creation;
  66         /// in-kernel pit status
  67         int pit_in_kernel;
  68         /// in-kernel coalesced mmio
  69         int coalesced_mmio;
  70 #ifdef KVM_CAP_IRQ_ROUTING
  71         struct kvm_irq_routing *irq_routes;
  72         int nr_allocated_irq_routes;
  73 #endif
  74         void *used_gsi_bitmap;
  75         int max_gsi;
  76 };
  77
  78 struct kvm_vcpu_context
  79 {
  80         int fd;
  81         struct kvm_run *run;
  82         struct kvm_context *kvm;
  83         uint32_t id;
  84 };
  85
  86 typedef struct kvm_context *kvm_context_t;
  87 typedef struct kvm_vcpu_context *kvm_vcpu_context_t;
  88
  89 #include "kvm.h"
  90 int kvm_alloc_kernel_memory(kvm_context_t kvm, unsigned long memory,
  91                                                                 void **vm_mem);
  92 int kvm_alloc_userspace_memory(kvm_context_t kvm, unsigned long memory,
  93                                                                 void **vm_mem);
  94
  95 int kvm_arch_create(kvm_context_t kvm, unsigned long phys_mem_bytes,
  96                         void **vm_mem);
  97 int kvm_arch_run(kvm_vcpu_context_t vcpu);
  98
  99
 100 void kvm_show_code(kvm_vcpu_context_t vcpu);
 101
 102 int handle_halt(kvm_vcpu_context_t vcpu);
 103 int handle_shutdown(kvm_context_t kvm, CPUState *env);
 104 void post_kvm_run(kvm_context_t kvm, CPUState *env);
 105 int pre_kvm_run(kvm_context_t kvm, CPUState *env);
 106 int handle_io_window(kvm_context_t kvm);
 107 int handle_debug(kvm_vcpu_context_t vcpu, void *env);
 108 int try_push_interrupts(kvm_context_t kvm);
 109
 110 #if defined(__x86_64__) || defined(__i386__)
 111 struct kvm_msr_list *kvm_get_msr_list(kvm_context_t);
 112 int kvm_get_msrs(kvm_vcpu_context_t, struct kvm_msr_entry *msrs, int n);
 113 int kvm_set_msrs(kvm_vcpu_context_t, struct kvm_msr_entry *msrs, int n);
 114 int kvm_get_mce_cap_supported(kvm_context_t, uint64_t *mce_cap, int *max_banks);
 115 int kvm_setup_mce(kvm_vcpu_context_t vcpu, uint64_t *mcg_cap);
 116 struct kvm_x86_mce;
 117 int kvm_set_mce(kvm_vcpu_context_t vcpu, struct kvm_x86_mce *mce);
 118 #endif
 119
 120 /*!
 121  * \brief Create new KVM context
 122  *
 123  * This creates a new kvm_context. A KVM context is a small area of data that
 124  * holds information about the KVM instance that gets created by this call.\n
 125  * This should always be your first call to KVM.
 126  *
 127  * \param opaque Not used
 128  * \return NULL on failure
 129  */
 130 int kvm_init(int smp_cpus);
 131
 132 /*!
 133  * \brief Disable the in-kernel IRQCHIP creation
 134  *
 135  * In-kernel irqchip is enabled by default. If userspace irqchip is to be used,
 136  * this should be called prior to kvm_create().
 137  *
 138  * \param kvm Pointer to the kvm_context
 139  */
 140 void kvm_disable_irqchip_creation(kvm_context_t kvm);
 141
 142 /*!
 143  * \brief Disable the in-kernel PIT creation
 144  *
 145  * In-kernel pit is enabled by default. If userspace pit is to be used,
 146  * this should be called prior to kvm_create().
 147  *
 148  *  \param kvm Pointer to the kvm_context
 149  */
 150 void kvm_disable_pit_creation(kvm_context_t kvm);
 151
 152 /*!
 153  * \brief Create new virtual machine
 154  *
 155  * This creates a new virtual machine, maps physical RAM to it, and creates a
 156  * virtual CPU for it.\n
 157  * \n
 158  * Memory gets mapped for addresses 0->0xA0000, 0xC0000->phys_mem_bytes
 159  *
 160  * \param kvm Pointer to the current kvm_context
 161  * \param phys_mem_bytes The amount of physical ram you want the VM to have
 162  * \param phys_mem This pointer will be set to point to the memory that
 163  * kvm_create allocates for physical RAM
 164  * \return 0 on success
 165  */
 166 int kvm_create(kvm_context_t kvm,
 167                unsigned long phys_mem_bytes,
 168                void **phys_mem);
 169 int kvm_create_vm(kvm_context_t kvm);
 170 void kvm_create_irqchip(kvm_context_t kvm);
 171
 172 /*!
 173  * \brief Create a new virtual cpu
 174  *
 175  * This creates a new virtual cpu (the first vcpu is created by kvm_create()).
 176  * Should be called from a thread dedicated to the vcpu.
 177  *
 178  * \param kvm kvm context
 179  * \param slot vcpu number (> 0)
 180  * \return 0 on success, -errno on failure
 181  */
 182 kvm_vcpu_context_t kvm_create_vcpu(CPUState *env, int id);
 183
 184 /*!
 185  * \brief Start the VCPU
 186  *
 187  * This starts the VCPU and virtualization is started.\n
 188  * \n
 189  * This function will not return until any of these conditions are met:
 190  * - An IO/MMIO handler does not return "0"
 191  * - An exception that neither the guest OS, nor KVM can handle occurs
 192  *
 193  * \note This function will call the callbacks registered in kvm_init()
 194  * to emulate those functions
 195  * \note If you at any point want to interrupt the VCPU, kvm_run() will
 196  * listen to the EINTR signal. This allows you to simulate external interrupts
 197  * and asyncronous IO.
 198  *
 199  * \param kvm Pointer to the current kvm_context
 200  * \param vcpu Which virtual CPU should be started
 201  * \return 0 on success, but you really shouldn't expect this function to
 202  * return except for when an error has occured, or when you have sent it
 203  * an EINTR signal.
 204  */
 205 int kvm_run(kvm_vcpu_context_t vcpu, void *env);
 206
 207 /*!
 208  * \brief Get interrupt flag from on last exit to userspace
 209  *
 210  * This gets the CPU interrupt flag as it was on the last exit to userspace.
 211  *
 212  * \param kvm Pointer to the current kvm_context
 213  * \param vcpu Which virtual CPU should get dumped
 214  * \return interrupt flag value (0 or 1)
 215  */
 216 int kvm_get_interrupt_flag(kvm_vcpu_context_t vcpu);
 217
 218 /*!
 219  * \brief Get the value of the APIC_BASE msr as of last exit to userspace
 220  *
 221  * This gets the APIC_BASE msr as it was on the last exit to userspace.
 222  *
 223  * \param kvm Pointer to the current kvm_context
 224  * \param vcpu Which virtual CPU should get dumped
 225  * \return APIC_BASE msr contents
 226  */
 227 uint64_t kvm_get_apic_base(kvm_vcpu_context_t vcpu);
 228
 229 /*!
 230  * \brief Check if a vcpu is ready for interrupt injection
 231  *
 232  * This checks if vcpu interrupts are not masked by mov ss or sti.
 233  *
 234  * \param kvm Pointer to the current kvm_context
 235  * \param vcpu Which virtual CPU should get dumped
 236  * \return boolean indicating interrupt injection readiness
 237  */
 238 int kvm_is_ready_for_interrupt_injection(kvm_vcpu_context_t vcpu);
 239
 240 /*!
 241  * \brief Read VCPU registers
 242  *
 243  * This gets the GP registers from the VCPU and outputs them
 244  * into a kvm_regs structure
 245  *
 246  * \note This function returns a \b copy of the VCPUs registers.\n
 247  * If you wish to modify the VCPUs GP registers, you should call kvm_set_regs()
 248  *
 249  * \param kvm Pointer to the current kvm_context
 250  * \param vcpu Which virtual CPU should get dumped
 251  * \param regs Pointer to a kvm_regs which will be populated with the VCPUs
 252  * registers values
 253  * \return 0 on success
 254  */
 255 int kvm_get_regs(kvm_vcpu_context_t vcpu, struct kvm_regs *regs);
 256
 257 /*!
 258  * \brief Write VCPU registers
 259  *
 260  * This sets the GP registers on the VCPU from a kvm_regs structure
 261  *
 262  * \note When this function returns, the regs pointer and the data it points to
 263  * can be discarded
 264  * \param kvm Pointer to the current kvm_context
 265  * \param vcpu Which virtual CPU should get dumped
 266  * \param regs Pointer to a kvm_regs which will be populated with the VCPUs
 267  * registers values
 268  * \return 0 on success
 269  */
 270 int kvm_set_regs(kvm_vcpu_context_t vcpu, struct kvm_regs *regs);
 271 /*!
 272  * \brief Read VCPU fpu registers
 273  *
 274  * This gets the FPU registers from the VCPU and outputs them
 275  * into a kvm_fpu structure
 276  *
 277  * \note This function returns a \b copy of the VCPUs registers.\n
 278  * If you wish to modify the VCPU FPU registers, you should call kvm_set_fpu()
 279  *
 280  * \param kvm Pointer to the current kvm_context
 281  * \param vcpu Which virtual CPU should get dumped
 282  * \param fpu Pointer to a kvm_fpu which will be populated with the VCPUs
 283  * fpu registers values
 284  * \return 0 on success
 285  */
 286 int kvm_get_fpu(kvm_vcpu_context_t vcpu, struct kvm_fpu *fpu);
 287
 288 /*!
 289  * \brief Write VCPU fpu registers
 290  *
 291  * This sets the FPU registers on the VCPU from a kvm_fpu structure
 292  *
 293  * \note When this function returns, the fpu pointer and the data it points to
 294  * can be discarded
 295  * \param kvm Pointer to the current kvm_context
 296  * \param vcpu Which virtual CPU should get dumped
 297  * \param fpu Pointer to a kvm_fpu which holds the new vcpu fpu state
 298  * \return 0 on success
 299  */
 300 int kvm_set_fpu(kvm_vcpu_context_t vcpu, struct kvm_fpu *fpu);
 301
 302 /*!
 303  * \brief Read VCPU system registers
 304  *
 305  * This gets the non-GP registers from the VCPU and outputs them
 306  * into a kvm_sregs structure
 307  *
 308  * \note This function returns a \b copy of the VCPUs registers.\n
 309  * If you wish to modify the VCPUs non-GP registers, you should call
 310  * kvm_set_sregs()
 311  *
 312  * \param kvm Pointer to the current kvm_context
 313  * \param vcpu Which virtual CPU should get dumped
 314  * \param regs Pointer to a kvm_sregs which will be populated with the VCPUs
 315  * registers values
 316  * \return 0 on success
 317  */
 318 int kvm_get_sregs(kvm_vcpu_context_t vcpu, struct kvm_sregs *regs);
 319
 320 /*!
 321  * \brief Write VCPU system registers
 322  *
 323  * This sets the non-GP registers on the VCPU from a kvm_sregs structure
 324  *
 325  * \note When this function returns, the regs pointer and the data it points to
 326  * can be discarded
 327  * \param kvm Pointer to the current kvm_context
 328  * \param vcpu Which virtual CPU should get dumped
 329  * \param regs Pointer to a kvm_sregs which will be populated with the VCPUs
 330  * registers values
 331  * \return 0 on success
 332  */
 333 int kvm_set_sregs(kvm_vcpu_context_t vcpu, struct kvm_sregs *regs);
 334
 335 #ifdef KVM_CAP_MP_STATE
 336 /*!
 337  *  * \brief Read VCPU MP state
 338  *
 339  */
 340 int kvm_get_mpstate(kvm_vcpu_context_t vcpu, struct kvm_mp_state *mp_state);
 341
 342 /*!
 343  *  * \brief Write VCPU MP state
 344  *
 345  */
 346 int kvm_set_mpstate(kvm_vcpu_context_t vcpu, struct kvm_mp_state *mp_state);
 347 /*!
 348  *  * \brief Reset VCPU MP state
 349  *
 350  */
 351 static inline int kvm_reset_mpstate(kvm_vcpu_context_t vcpu)
 352 {
 353     struct kvm_mp_state mp_state = {.mp_state = KVM_MP_STATE_UNINITIALIZED};
 354     return kvm_set_mpstate(vcpu, &mp_state);
 355 }
 356 #endif
 357
 358 /*!
 359  * \brief Simulate an external vectored interrupt
 360  *
 361  * This allows you to simulate an external vectored interrupt.
 362  *
 363  * \param kvm Pointer to the current kvm_context
 364  * \param vcpu Which virtual CPU should get dumped
 365  * \param irq Vector number
 366  * \return 0 on success
 367  */
 368 int kvm_inject_irq(kvm_vcpu_context_t vcpu, unsigned irq);
 369
 370 #ifdef KVM_CAP_SET_GUEST_DEBUG
 371 int kvm_set_guest_debug(kvm_vcpu_context_t, struct kvm_guest_debug *dbg);
 372 #endif
 373
 374 #if defined(__i386__) || defined(__x86_64__)
 375 /*!
 376  * \brief Setup a vcpu's cpuid instruction emulation
 377  *
 378  * Set up a table of cpuid function to cpuid outputs.\n
 379  *
 380  * \param kvm Pointer to the current kvm_context
 381  * \param vcpu Which virtual CPU should be initialized
 382  * \param nent number of entries to be installed
 383  * \param entries cpuid function entries table
 384  * \return 0 on success, or -errno on error
 385  */
 386 int kvm_setup_cpuid(kvm_vcpu_context_t vcpu, int nent,
 387                     struct kvm_cpuid_entry *entries);
 388
 389 /*!
 390  * \brief Setup a vcpu's cpuid instruction emulation
 391  *
 392  * Set up a table of cpuid function to cpuid outputs.
 393  * This call replaces the older kvm_setup_cpuid interface by adding a few
 394  * parameters to support cpuid functions that have sub-leaf values.
 395  *
 396  * \param kvm Pointer to the current kvm_context
 397  * \param vcpu Which virtual CPU should be initialized
 398  * \param nent number of entries to be installed
 399  * \param entries cpuid function entries table
 400  * \return 0 on success, or -errno on error
 401  */
 402 int kvm_setup_cpuid2(kvm_vcpu_context_t vcpu, int nent,
 403                      struct kvm_cpuid_entry2 *entries);
 404
 405 /*!
 406  * \brief Setting the number of shadow pages to be allocated to the vm
 407  *
 408  * \param kvm pointer to kvm_context
 409  * \param nrshadow_pages number of pages to be allocated
 410  */
 411 int kvm_set_shadow_pages(kvm_context_t kvm, unsigned int nrshadow_pages);
 412
 413 /*!
 414  * \brief Getting the number of shadow pages that are allocated to the vm
 415  *
 416  * \param kvm pointer to kvm_context
 417  * \param nrshadow_pages number of pages to be allocated
 418  */
 419 int kvm_get_shadow_pages(kvm_context_t kvm , unsigned int *nrshadow_pages);
 420
 421 /*!
 422  * \brief Set up cr8 for next time the vcpu is executed
 423  *
 424  * This is a fast setter for cr8, which will be applied when the
 425  * vcpu next enters guest mode.
 426  *
 427  * \param kvm Pointer to the current kvm_context
 428  * \param vcpu Which virtual CPU should get dumped
 429  * \param cr8 next cr8 value
 430  */
 431 void kvm_set_cr8(kvm_vcpu_context_t vcpu, uint64_t cr8);
 432
 433 /*!
 434  * \brief Get cr8 for sync tpr in qemu apic emulation
 435  *
 436  * This is a getter for cr8, which used to sync with the tpr in qemu
 437  * apic emualtion.
 438  *
 439  * \param kvm Pointer to the current kvm_context
 440  * \param vcpu Which virtual CPU should get dumped
 441  */
 442 __u64 kvm_get_cr8(kvm_vcpu_context_t vcpu);
 443 #endif
 444
 445 /*!
 446  * \brief Set a vcpu's signal mask for guest mode
 447  *
 448  * A vcpu can have different signals blocked in guest mode and user mode.
 449  * This allows guest execution to be interrupted on a signal, without requiring
 450  * that the signal be delivered to a signal handler (the signal can be
 451  * dequeued using sigwait(2).
 452  *
 453  * \param kvm Pointer to the current kvm_context
 454  * \param vcpu Which virtual CPU should be initialized
 455  * \param sigset signal mask for guest mode
 456  * \return 0 on success, or -errno on error
 457  */
 458 int kvm_set_signal_mask(kvm_vcpu_context_t vcpu, const sigset_t *sigset);
 459
 460 /*!
 461  * \brief Dump VCPU registers
 462  *
 463  * This dumps some of the information that KVM has about a virtual CPU, namely:
 464  * - GP Registers
 465  *
 466  * A much more verbose version of this is available as kvm_dump_vcpu()
 467  *
 468  * \param kvm Pointer to the current kvm_context
 469  * \param vcpu Which virtual CPU should get dumped
 470  * \return 0 on success
 471  */
 472 void kvm_show_regs(kvm_vcpu_context_t vcpu);
 473
 474
 475 void *kvm_create_phys_mem(kvm_context_t, unsigned long phys_start,
 476                           unsigned long len, int log, int writable);
 477 void kvm_destroy_phys_mem(kvm_context_t, unsigned long phys_start,
 478                           unsigned long len);
 479 void kvm_unregister_memory_area(kvm_context_t, uint64_t phys_start,
 480                                 unsigned long len);
 481
 482 int kvm_is_containing_region(kvm_context_t kvm, unsigned long phys_start, unsigned long size);
 483 int kvm_register_phys_mem(kvm_context_t kvm,
 484                         unsigned long phys_start, void *userspace_addr,
 485                         unsigned long len, int log);
 486 int kvm_get_dirty_pages(kvm_context_t, unsigned long phys_addr, void *buf);
 487 int kvm_get_dirty_pages_range(kvm_context_t kvm, unsigned long phys_addr,
 488                               unsigned long end_addr, void*opaque,
 489                               int (*cb)(unsigned long start, unsigned long len,
 490                                         void*bitmap, void *opaque));
 491 int kvm_register_coalesced_mmio(kvm_context_t kvm,
 492                                 uint64_t addr, uint32_t size);
 493 int kvm_unregister_coalesced_mmio(kvm_context_t kvm,
 494                                   uint64_t addr, uint32_t size);
 495
 496 /*!
 497  * \brief Create a memory alias
 498  *
 499  * Aliases a portion of physical memory to another portion.  If the guest
 500  * accesses the alias region, it will behave exactly as if it accessed
 501  * the target memory.
 502  */
 503 int kvm_create_memory_alias(kvm_context_t,
 504                             uint64_t phys_start, uint64_t len,
 505                             uint64_t target_phys);
 506
 507 /*!
 508  * \brief Destroy a memory alias
 509  *
 510  * Removes an alias created with kvm_create_memory_alias().
 511  */
 512 int kvm_destroy_memory_alias(kvm_context_t, uint64_t phys_start);
 513
 514 /*!
 515  * \brief Get a bitmap of guest ram pages which are allocated to the guest.
 516  *
 517  * \param kvm Pointer to the current kvm_context
 518  * \param phys_addr Memory slot phys addr
 519  * \param bitmap Long aligned address of a big enough bitmap (one bit per page)
 520  */
 521 int kvm_get_mem_map(kvm_context_t kvm, unsigned long phys_addr, void *bitmap);
 522 int kvm_get_mem_map_range(kvm_context_t kvm, unsigned long phys_addr,
 523                            unsigned long len, void *buf, void *opaque,
 524                            int (*cb)(unsigned long start,unsigned long len,
 525                                      void* bitmap, void* opaque));
 526 int kvm_set_irq_level(kvm_context_t kvm, int irq, int level, int *status);
 527
 528 int kvm_dirty_pages_log_enable_slot(kvm_context_t kvm,
 529                                     uint64_t phys_start,
 530                                     uint64_t len);
 531 int kvm_dirty_pages_log_disable_slot(kvm_context_t kvm,
 532                                      uint64_t phys_start,
 533                                      uint64_t len);
 534 /*!
 535  * \brief Enable dirty-pages-logging for all memory regions
 536  *
 537  * \param kvm Pointer to the current kvm_context
 538  */
 539 int kvm_dirty_pages_log_enable_all(kvm_context_t kvm);
 540
 541 /*!
 542  * \brief Disable dirty-page-logging for some memory regions
 543  *
 544  * Disable dirty-pages-logging for those memory regions that were
 545  * created with dirty-page-logging disabled.
 546  *
 547  * \param kvm Pointer to the current kvm_context
 548  */
 549 int kvm_dirty_pages_log_reset(kvm_context_t kvm);
 550
 551 /*!
 552  * \brief Query whether in kernel irqchip is used
 553  *
 554  * \param kvm Pointer to the current kvm_context
 555  */
 556 int kvm_irqchip_in_kernel(kvm_context_t kvm);
 557
 558 #ifdef KVM_CAP_IRQCHIP
 559 /*!
 560  * \brief Dump in kernel IRQCHIP contents
 561  *
 562  * Dump one of the in kernel irq chip devices, including PIC (master/slave)
 563  * and IOAPIC into a kvm_irqchip structure
 564  *
 565  * \param kvm Pointer to the current kvm_context
 566  * \param chip The irq chip device to be dumped
 567  */
 568 int kvm_get_irqchip(kvm_context_t kvm, struct kvm_irqchip *chip);
 569
 570 /*!
 571  * \brief Set in kernel IRQCHIP contents
 572  *
 573  * Write one of the in kernel irq chip devices, including PIC (master/slave)
 574  * and IOAPIC
 575  *
 576  *
 577  * \param kvm Pointer to the current kvm_context
 578  * \param chip THe irq chip device to be written
 579  */
 580 int kvm_set_irqchip(kvm_context_t kvm, struct kvm_irqchip *chip);
 581
 582 #if defined(__i386__) || defined(__x86_64__)
 583 /*!
 584  * \brief Get in kernel local APIC for vcpu
 585  *
 586  * Save the local apic state including the timer of a virtual CPU
 587  *
 588  * \param kvm Pointer to the current kvm_context
 589  * \param vcpu Which virtual CPU should be accessed
 590  * \param s Local apic state of the specific virtual CPU
 591  */
 592 int kvm_get_lapic(kvm_vcpu_context_t vcpu, struct kvm_lapic_state *s);
 593
 594 /*!
 595  * \brief Set in kernel local APIC for vcpu
 596  *
 597  * Restore the local apic state including the timer of a virtual CPU
 598  *
 599  * \param kvm Pointer to the current kvm_context
 600  * \param vcpu Which virtual CPU should be accessed
 601  * \param s Local apic state of the specific virtual CPU
 602  */
 603 int kvm_set_lapic(kvm_vcpu_context_t vcpu, struct kvm_lapic_state *s);
 604
 605 #endif
 606
 607 /*!
 608  * \brief Simulate an NMI
 609  *
 610  * This allows you to simulate a non-maskable interrupt.
 611  *
 612  * \param kvm Pointer to the current kvm_context
 613  * \param vcpu Which virtual CPU should get dumped
 614  * \return 0 on success
 615  */
 616 int kvm_inject_nmi(kvm_vcpu_context_t vcpu);
 617
 618 #endif
 619
 620 /*!
 621  * \brief Simulate an x86 MCE
 622  *
 623  * This allows you to simulate a x86 MCE.
 624  *
 625  * \param cenv Which virtual CPU should get MCE injected
 626  * \param bank Bank number
 627  * \param status MSR_MCI_STATUS
 628  * \param mcg_status MSR_MCG_STATUS
 629  * \param addr MSR_MCI_ADDR
 630  * \param misc MSR_MCI_MISC
 631  */
 632 void kvm_inject_x86_mce(CPUState *cenv, int bank, uint64_t status,
 633                         uint64_t mcg_status, uint64_t addr, uint64_t misc);
 634
 635 /*!
 636  * \brief Query wheather in kernel pit is used
 637  *
 638  *  \param kvm Pointer to the current kvm_context
 639  */
 640 int kvm_pit_in_kernel(kvm_context_t kvm);
 641
 642 /*!
 643  * \brief Initialize coalesced MMIO
 644  *
 645  * Check for coalesced MMIO capability and store in context
 646  *
 647  * \param kvm Pointer to the current kvm_context
 648  */
 649 int kvm_init_coalesced_mmio(kvm_context_t kvm);
 650
 651 #ifdef KVM_CAP_PIT
 652
 653 #if defined(__i386__) || defined(__x86_64__)
 654 /*!
 655  * \brief Get in kernel PIT of the virtual domain
 656  *
 657  * Save the PIT state.
 658  *
 659  * \param kvm Pointer to the current kvm_context
 660  * \param s PIT state of the virtual domain
 661  */
 662 int kvm_get_pit(kvm_context_t kvm, struct kvm_pit_state *s);
 663
 664 /*!
 665  * \brief Set in kernel PIT of the virtual domain
 666  *
 667  * Restore the PIT state.
 668  * Timer would be retriggerred after restored.
 669  *
 670  * \param kvm Pointer to the current kvm_context
 671  * \param s PIT state of the virtual domain
 672  */
 673 int kvm_set_pit(kvm_context_t kvm, struct kvm_pit_state *s);
 674
 675 int kvm_reinject_control(kvm_context_t kvm, int pit_reinject);
 676
 677 #ifdef KVM_CAP_PIT_STATE2
 678 /*!
 679  * \brief Check for kvm support of kvm_pit_state2
 680  *
 681  * \param kvm Pointer to the current kvm_context
 682  * \return 0 on success
 683  */
 684 int kvm_has_pit_state2(kvm_context_t kvm);
 685
 686 /*!
 687  * \brief Set in kernel PIT state2 of the virtual domain
 688  *
 689  *
 690  * \param kvm Pointer to the current kvm_context
 691  * \param ps2 PIT state2 of the virtual domain
 692  * \return 0 on success
 693  */
 694 int kvm_set_pit2(kvm_context_t kvm, struct kvm_pit_state2 *ps2);
 695
 696 /*!
 697  * \brief Get in kernel PIT state2 of the virtual domain
 698  *
 699  *
 700  * \param kvm Pointer to the current kvm_context
 701  * \param ps2 PIT state2 of the virtual domain
 702  * \return 0 on success
 703  */
 704 int kvm_get_pit2(kvm_context_t kvm, struct kvm_pit_state2 *ps2);
 705
 706 #endif
 707 #endif
 708 #endif
 709
 710 #ifdef KVM_CAP_VAPIC
 711
 712 /*!
 713  * \brief Enable kernel tpr access reporting
 714  *
 715  * When tpr access reporting is enabled, the kernel will call the
 716  * ->tpr_access() callback every time the guest vcpu accesses the tpr.
 717  *
 718  * \param kvm Pointer to the current kvm_context
 719  * \param vcpu vcpu to enable tpr access reporting on
 720  */
 721 int kvm_enable_tpr_access_reporting(kvm_vcpu_context_t vcpu);
 722
 723 /*!
 724  * \brief Disable kernel tpr access reporting
 725  *
 726  * Undoes the effect of kvm_enable_tpr_access_reporting().
 727  *
 728  * \param kvm Pointer to the current kvm_context
 729  * \param vcpu vcpu to disable tpr access reporting on
 730  */
 731 int kvm_disable_tpr_access_reporting(kvm_vcpu_context_t vcpu);
 732
 733 int kvm_enable_vapic(kvm_vcpu_context_t vcpu, uint64_t vapic);
 734
 735 #endif
 736
 737 #if defined(__s390__)
 738 int kvm_s390_initial_reset(kvm_context_t kvm, int slot);
 739 int kvm_s390_interrupt(kvm_context_t kvm, int slot,
 740         struct kvm_s390_interrupt *kvmint);
 741 int kvm_s390_set_initial_psw(kvm_context_t kvm, int slot, psw_t psw);
 742 int kvm_s390_store_status(kvm_context_t kvm, int slot, unsigned long addr);
 743 #endif
 744
 745 #ifdef KVM_CAP_DEVICE_ASSIGNMENT
 746 /*!
 747  * \brief Notifies host kernel about a PCI device to be assigned to a guest
 748  *
 749  * Used for PCI device assignment, this function notifies the host
 750  * kernel about the assigning of the physical PCI device to a guest.
 751  *
 752  * \param kvm Pointer to the current kvm_context
 753  * \param assigned_dev Parameters, like bus, devfn number, etc
 754  */
 755 int kvm_assign_pci_device(kvm_context_t kvm,
 756                           struct kvm_assigned_pci_dev *assigned_dev);
 757
 758 /*!
 759  * \brief Assign IRQ for an assigned device
 760  *
 761  * Used for PCI device assignment, this function assigns IRQ numbers for
 762  * an physical device and guest IRQ handling.
 763  *
 764  * \param kvm Pointer to the current kvm_context
 765  * \param assigned_irq Parameters, like dev id, host irq, guest irq, etc
 766  */
 767 int kvm_assign_irq(kvm_context_t kvm,
 768                    struct kvm_assigned_irq *assigned_irq);
 769
 770 #ifdef KVM_CAP_ASSIGN_DEV_IRQ
 771 /*!
 772  * \brief Deassign IRQ for an assigned device
 773  *
 774  * Used for PCI device assignment, this function deassigns IRQ numbers
 775  * for an assigned device.
 776  *
 777  * \param kvm Pointer to the current kvm_context
 778  * \param assigned_irq Parameters, like dev id, host irq, guest irq, etc
 779  */
 780 int kvm_deassign_irq(kvm_context_t kvm,
 781                    struct kvm_assigned_irq *assigned_irq);
 782 #endif
 783 #endif
 784
 785 /*!
 786  * \brief Determines whether destroying memory regions is allowed
 787  *
 788  * KVM before 2.6.29 had a bug when destroying memory regions.
 789  *
 790  * \param kvm Pointer to the current kvm_context
 791  */
 792 int kvm_destroy_memory_region_works(kvm_context_t kvm);
 793
 794 #ifdef KVM_CAP_DEVICE_DEASSIGNMENT
 795 /*!
 796  * \brief Notifies host kernel about a PCI device to be deassigned from a guest
 797  *
 798  * Used for hot remove PCI device, this function notifies the host
 799  * kernel about the deassigning of the physical PCI device from a guest.
 800  *
 801  * \param kvm Pointer to the current kvm_context
 802  * \param assigned_dev Parameters, like bus, devfn number, etc
 803  */
 804 int kvm_deassign_pci_device(kvm_context_t kvm,
 805                             struct kvm_assigned_pci_dev *assigned_dev);
 806 #endif
 807
 808 /*!
 809  * \brief Checks whether the generic irq routing capability is present
 810  *
 811  * Checks whether kvm can reroute interrupts among the various interrupt
 812  * controllers.
 813  *
 814  * \param kvm Pointer to the current kvm_context
 815  */
 816 int kvm_has_gsi_routing(kvm_context_t kvm);
 817
 818 /*!
 819  * \brief Determines the number of gsis that can be routed
 820  *
 821  * Returns the number of distinct gsis that can be routed by kvm.  This is
 822  * also the number of distinct routes (if a gsi has two routes, than another
 823  * gsi cannot be used...)
 824  *
 825  * \param kvm Pointer to the current kvm_context
 826  */
 827 int kvm_get_gsi_count(kvm_context_t kvm);
 828
 829 /*!
 830  * \brief Clears the temporary irq routing table
 831  *
 832  * Clears the temporary irq routing table.  Nothing is committed to the
 833  * running VM.
 834  *
 835  * \param kvm Pointer to the current kvm_context
 836  */
 837 int kvm_clear_gsi_routes(kvm_context_t kvm);
 838
 839 /*!
 840  * \brief Adds an irq route to the temporary irq routing table
 841  *
 842  * Adds an irq route to the temporary irq routing table.  Nothing is
 843  * committed to the running VM.
 844  *
 845  * \param kvm Pointer to the current kvm_context
 846  */
 847 int kvm_add_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin);
 848
 849 /*!
 850  * \brief Removes an irq route from the temporary irq routing table
 851  *
 852  * Adds an irq route to the temporary irq routing table.  Nothing is
 853  * committed to the running VM.
 854  *
 855  * \param kvm Pointer to the current kvm_context
 856  */
 857 int kvm_del_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin);
 858
 859 struct kvm_irq_routing_entry;
 860 /*!
 861  * \brief Adds a routing entry to the temporary irq routing table
 862  *
 863  * Adds a filled routing entry to the temporary irq routing table. Nothing is
 864  * committed to the running VM.
 865  *
 866  * \param kvm Pointer to the current kvm_context
 867  */
 868 int kvm_add_routing_entry(kvm_context_t kvm,
 869                           struct kvm_irq_routing_entry* entry);
 870
 871 /*!
 872  * \brief Removes a routing from the temporary irq routing table
 873  *
 874  * Remove a routing to the temporary irq routing table.  Nothing is
 875  * committed to the running VM.
 876  *
 877  * \param kvm Pointer to the current kvm_context
 878  */
 879 int kvm_del_routing_entry(kvm_context_t kvm,
 880                           struct kvm_irq_routing_entry* entry);
 881
 882 /*!
 883  * \brief Updates a routing in the temporary irq routing table
 884  *
 885  * Update a routing in the temporary irq routing table
 886  * with a new value. entry type and GSI can not be changed.
 887  * Nothing is committed to the running VM.
 888  *
 889  * \param kvm Pointer to the current kvm_context
 890  */
 891 int kvm_update_routing_entry(kvm_context_t kvm,
 892                              struct kvm_irq_routing_entry* entry,
 893                              struct kvm_irq_routing_entry* newentry
 894 );
 895
 896 /*!
 897  * \brief Commit the temporary irq routing table
 898  *
 899  * Commit the temporary irq routing table to the running VM.
 900  *
 901  * \param kvm Pointer to the current kvm_context
 902  */
 903 int kvm_commit_irq_routes(kvm_context_t kvm);
 904
 905 /*!
 906  * \brief Get unused GSI number for irq routing table
 907  *
 908  * Get unused GSI number for irq routing table
 909  *
 910  * \param kvm Pointer to the current kvm_context
 911  */
 912 int kvm_get_irq_route_gsi(kvm_context_t kvm);
 913
 914 /*!
 915  * \brief Create a file descriptor for injecting interrupts
 916  *
 917  * Creates an eventfd based file-descriptor that maps to a specific GSI
 918  * in the guest.  eventfd compliant signaling (write() from userspace, or
 919  * eventfd_signal() from kernelspace) will cause the GSI to inject
 920  * itself into the guest at the next available window.
 921  *
 922  * \param kvm Pointer to the current kvm_context
 923  * \param gsi GSI to assign to this fd
 924  * \param flags reserved, must be zero
 925  */
 926 int kvm_irqfd(kvm_context_t kvm, int gsi, int flags);
 927
 928 #ifdef KVM_CAP_DEVICE_MSIX
 929 int kvm_assign_set_msix_nr(kvm_context_t kvm,
 930                            struct kvm_assigned_msix_nr *msix_nr);
 931 int kvm_assign_set_msix_entry(kvm_context_t kvm,
 932                               struct kvm_assigned_msix_entry *entry);
 933 #endif
 934
 935 uint32_t kvm_get_supported_cpuid(kvm_context_t kvm, uint32_t function, int reg);
 936
 937 #else /* !CONFIG_KVM */
 938
 939 typedef struct kvm_context *kvm_context_t;
 940 typedef struct kvm_vcpu_context *kvm_vcpu_context_t;
 941
 942 struct kvm_pit_state { };
 943
 944 static inline int kvm_init(int smp_cpus) { return 0; }
 945 static inline void kvm_inject_x86_mce(
 946     CPUState *cenv, int bank,uint64_t status,
 947     uint64_t mcg_status, uint64_t addr, uint64_t misc) { }
 948
 949
 950 extern int kvm_allowed;
 951
 952 #endif /* !CONFIG_KVM */
 953
 954
 955 int kvm_main_loop(void);
 956 int kvm_qemu_init(void);
 957 int kvm_init_ap(void);
 958 int kvm_vcpu_inited(CPUState *env);
 959 void kvm_load_registers(CPUState *env);
 960 void kvm_save_registers(CPUState *env);
 961 void kvm_load_mpstate(CPUState *env);
 962 void kvm_save_mpstate(CPUState *env);
 963 int kvm_cpu_exec(CPUState *env);
 964 int kvm_insert_breakpoint(CPUState *current_env, target_ulong addr,
 965                           target_ulong len, int type);
 966 int kvm_remove_breakpoint(CPUState *current_env, target_ulong addr,
 967                           target_ulong len, int type);
 968 void kvm_remove_all_breakpoints(CPUState *current_env);
 969 int kvm_update_guest_debug(CPUState *env, unsigned long reinject_trap);
 970 int kvm_qemu_init_env(CPUState *env);
 971 int kvm_qemu_check_extension(int ext);
 972 void kvm_apic_init(CPUState *env);
 973 /* called from vcpu initialization */
 974 void qemu_kvm_load_lapic(CPUState *env);
 975
 976 void kvm_hpet_enable_kpit(void);
 977 void kvm_hpet_disable_kpit(void);
 978 int kvm_set_irq(int irq, int level, int *status);
 979
 980 int kvm_physical_memory_set_dirty_tracking(int enable);
 981 int kvm_update_dirty_pages_log(void);
 982 int kvm_get_phys_ram_page_bitmap(unsigned char *bitmap);
 983
 984 void qemu_kvm_call_with_env(void (*func)(void *), void *data, CPUState *env);
 985 void qemu_kvm_cpuid_on_env(CPUState *env);
 986 void kvm_inject_interrupt(CPUState *env, int mask);
 987 void kvm_update_after_sipi(CPUState *env);
 988 void kvm_update_interrupt_request(CPUState *env);
 989 void kvm_set_phys_mem(target_phys_addr_t start_addr, ram_addr_t size,
 990                       ram_addr_t phys_offset);
 991 void *kvm_cpu_create_phys_mem(target_phys_addr_t start_addr,
 992                               unsigned long size, int log, int writable);
 993
 994 void kvm_cpu_destroy_phys_mem(target_phys_addr_t start_addr,
 995                               unsigned long size);
 996 void kvm_qemu_log_memory(target_phys_addr_t start, target_phys_addr_t size,
 997                          int log);
 998 int kvm_setup_guest_memory(void *area, unsigned long size);
 999 int kvm_qemu_create_memory_alias(uint64_t phys_start,
1000                                  uint64_t len,
1001                                  uint64_t target_phys);
1002 int kvm_qemu_destroy_memory_alias(uint64_t phys_start);
1003
1004 int kvm_arch_qemu_create_context(void);
1005
1006 void kvm_arch_save_regs(CPUState *env);
1007 void kvm_arch_load_regs(CPUState *env);
1008 void kvm_arch_load_mpstate(CPUState *env);
1009 void kvm_arch_save_mpstate(CPUState *env);
1010 int kvm_arch_qemu_init_env(CPUState *cenv);
1011 void kvm_arch_pre_kvm_run(void *opaque, CPUState *env);
1012 void kvm_arch_post_kvm_run(void *opaque, CPUState *env);
1013 int kvm_arch_has_work(CPUState *env);
1014 void kvm_arch_process_irqchip_events(CPUState *env);
1015 int kvm_arch_try_push_interrupts(void *opaque);
1016 void kvm_arch_push_nmi(void *opaque);
1017 void kvm_arch_update_regs_for_sipi(CPUState *env);
1018 void kvm_arch_cpu_reset(CPUState *env);
1019 int kvm_set_boot_cpu_id(uint32_t id);
1020
1021 struct kvm_guest_debug;
1022 struct kvm_debug_exit_arch;
1023
1024 struct kvm_sw_breakpoint {
1025     target_ulong pc;
1026     target_ulong saved_insn;
1027     int use_count;
1028     TAILQ_ENTRY(kvm_sw_breakpoint) entry;
1029 };
1030
1031 TAILQ_HEAD(kvm_sw_breakpoint_head, kvm_sw_breakpoint);
1032
1033 int kvm_arch_debug(struct kvm_debug_exit_arch *arch_info);
1034 int kvm_sw_breakpoints_active(CPUState *env);
1035 struct kvm_sw_breakpoint *kvm_find_sw_breakpoint(CPUState *env, target_ulong pc);
1036 int kvm_arch_insert_sw_breakpoint(CPUState *current_env,
1037                                   struct kvm_sw_breakpoint *bp);
1038 int kvm_arch_remove_sw_breakpoint(CPUState *current_env,
1039                                   struct kvm_sw_breakpoint *bp);
1040 int kvm_arch_insert_hw_breakpoint(target_ulong addr,
1041                                   target_ulong len, int type);
1042 int kvm_arch_remove_hw_breakpoint(target_ulong addr,
1043                                   target_ulong len, int type);
1044 void kvm_arch_remove_all_hw_breakpoints(void);
1045 void kvm_arch_update_guest_debug(CPUState *env, struct kvm_guest_debug *dbg);
1046
1047 void qemu_kvm_aio_wait_start(void);
1048 void qemu_kvm_aio_wait(void);
1049 void qemu_kvm_aio_wait_end(void);
1050
1051 void qemu_kvm_notify_work(void);
1052
1053 void kvm_tpr_opt_setup(void);
1054 void kvm_tpr_access_report(CPUState *env, uint64_t rip, int is_write);
1055 void kvm_tpr_vcpu_start(CPUState *env);
1056
1057 int qemu_kvm_get_dirty_pages(unsigned long phys_addr, void *buf);
1058 int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size);
1059 int kvm_uncoalesce_mmio_region(target_phys_addr_t start, ram_addr_t size);
1060
1061 int kvm_arch_init_irq_routing(void);
1062
1063 int kvm_mmio_read(void *opaque, uint64_t addr, uint8_t *data, int len);
1064 int kvm_mmio_write(void *opaque, uint64_t addr, uint8_t *data, int len);
1065
1066 #ifdef USE_KVM_DEVICE_ASSIGNMENT
1067 struct ioperm_data;
1068
1069 void kvm_ioperm(CPUState *env, void *data);
1070 void kvm_add_ioperm_data(struct ioperm_data *data);
1071 void kvm_remove_ioperm_data(unsigned long start_port, unsigned long num);
1072 void kvm_arch_do_ioperm(void *_data);
1073 #endif
1074
1075 #define ALIGN(x, y)  (((x)+(y)-1) & ~((y)-1))
1076 #define BITMAP_SIZE(m) (ALIGN(((m)>>TARGET_PAGE_BITS), HOST_LONG_BITS) / 8)
1077
1078 #ifdef CONFIG_KVM
1079 #include "sys-queue.h"
1080
1081 extern int kvm_allowed;
1082 extern int kvm_irqchip;
1083 extern int kvm_pit;
1084 extern int kvm_pit_reinject;
1085 extern int kvm_nested;
1086 extern kvm_context_t kvm_context;
1087
1088 struct ioperm_data {
1089     unsigned long start_port;
1090     unsigned long num;
1091     int turn_on;
1092     LIST_ENTRY(ioperm_data) entries;
1093 };
1094
1095 void qemu_kvm_cpu_stop(CPUState *env);
1096 int kvm_arch_halt(void *opaque, kvm_vcpu_context_t vcpu);
1097 int handle_tpr_access(void *opaque, kvm_vcpu_context_t vcpu,
1098                              uint64_t rip, int is_write);
1099 int kvm_has_sync_mmu(void);
1100
1101 #define kvm_enabled() (kvm_allowed)
1102 #define qemu_kvm_irqchip_in_kernel() kvm_irqchip_in_kernel(kvm_context)
1103 #define qemu_kvm_pit_in_kernel() kvm_pit_in_kernel(kvm_context)
1104 #define qemu_kvm_has_gsi_routing() kvm_has_gsi_routing(kvm_context)
1105 #ifdef TARGET_I386
1106 #define qemu_kvm_has_pit_state2() kvm_has_pit_state2(kvm_context)
1107 #endif
1108 void kvm_init_vcpu(CPUState *env);
1109 void kvm_load_tsc(CPUState *env);
1110 #else
1111 #define kvm_has_sync_mmu() (0)
1112 #define kvm_enabled() (0)
1113 #define kvm_nested 0
1114 #define qemu_kvm_irqchip_in_kernel() (0)
1115 #define qemu_kvm_pit_in_kernel() (0)
1116 #define qemu_kvm_has_gsi_routing() (0)
1117 #ifdef TARGET_I386
1118 #define qemu_kvm_has_pit_state2() (0)
1119 #endif
1120 #define kvm_load_registers(env) do {} while(0)
1121 #define kvm_save_registers(env) do {} while(0)
1122 #define qemu_kvm_cpu_stop(env) do {} while(0)
1123 static inline void kvm_init_vcpu(CPUState *env) { }
1124 static inline void kvm_load_tsc(CPUState *env) {}
1125 #endif
1126
1127 void kvm_mutex_unlock(void);
1128 void kvm_mutex_lock(void);
1129
1130 static inline void qemu_mutex_unlock_iothread(void)
1131 {
1132     if (kvm_enabled())
1133         kvm_mutex_unlock();
1134 }
1135
1136 static inline void qemu_mutex_lock_iothread(void)
1137 {
1138     if (kvm_enabled())
1139         kvm_mutex_lock();
1140 }
1141
1142 int kvm_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, target_phys_addr_t end_addr);
1143
1144 int kvm_log_start(target_phys_addr_t phys_addr, target_phys_addr_t len);
1145 int kvm_log_stop(target_phys_addr_t phys_addr, target_phys_addr_t len);
1146
1147
1148 static inline int kvm_sync_vcpus(void) { return 0; }
1149
1150 static inline void kvm_arch_get_registers(CPUState *env)
1151 {
1152     kvm_save_registers(env);
1153     kvm_save_mpstate(env);
1154 }
1155
1156 static inline void kvm_arch_put_registers(CPUState *env)
1157 {
1158     kvm_load_registers(env);
1159     kvm_load_mpstate(env);
1160 }
1161
1162 static inline void cpu_synchronize_state(CPUState *env, int modified)
1163 {
1164     if (kvm_enabled()) {
1165         if (modified)
1166             kvm_arch_put_registers(env);
1167         else
1168             kvm_arch_get_registers(env);
1169     }
1170 }
1171
1172 uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
1173                                       int reg);
1174
1175
1176 static inline int kvm_set_migration_log(int enable)
1177 {
1178     return kvm_physical_memory_set_dirty_tracking(enable);
1179 }
1180
1181 #ifdef CONFIG_KVM
1182
1183 typedef struct KVMSlot
1184 {
1185     target_phys_addr_t start_addr;
1186     ram_addr_t memory_size;
1187     ram_addr_t phys_offset;
1188     int slot;
1189     int flags;
1190 } KVMSlot;
1191
1192 typedef struct kvm_dirty_log KVMDirtyLog;
1193
1194 typedef struct KVMState
1195 {
1196     KVMSlot slots[32];
1197     int fd;
1198     int vmfd;
1199     int coalesced_mmio;
1200     int broken_set_mem_region;
1201     int migration_log;
1202 #ifdef KVM_CAP_SET_GUEST_DEBUG
1203     struct kvm_sw_breakpoint_head kvm_sw_breakpoints;
1204 #endif
1205     struct kvm_context kvm_context;
1206 } KVMState;
1207
1208 extern KVMState *kvm_state;
1209
1210 int kvm_ioctl(KVMState *s, int type, ...);
1211 int kvm_vm_ioctl(KVMState *s, int type, ...);
1212 int kvm_check_extension(KVMState *s, unsigned int ext);
1213
1214 #endif
1215
1216 #endif