hw/block/tc58128.c

   1 #include "hw/hw.h"
   2 #include "hw/sh4/sh.h"
   3 #include "hw/loader.h"
   4
   5 #define CE1  0x0100
   6 #define CE2  0x0200
   7 #define RE   0x0400
   8 #define WE   0x0800
   9 #define ALE  0x1000
  10 #define CLE  0x2000
  11 #define RDY1 0x4000
  12 #define RDY2 0x8000
  13 #define RDY(n) ((n) == 0 ? RDY1 : RDY2)
  14
  15 typedef enum { WAIT, READ1, READ2, READ3 } state_t;
  16
  17 typedef struct {
  18     uint8_t *flash_contents;
  19     state_t state;
  20     uint32_t address;
  21     uint8_t address_cycle;
  22 } tc58128_dev;
  23
  24 static tc58128_dev tc58128_devs[2];
  25
  26 #define FLASH_SIZE (16*1024*1024)
  27
  28 static void init_dev(tc58128_dev * dev, const char *filename)
  29 {
  30     int ret, blocks;
  31
  32     dev->state = WAIT;
  33     dev->flash_contents = g_malloc(FLASH_SIZE);
  34     memset(dev->flash_contents, 0xff, FLASH_SIZE);
  35     if (filename) {
  36         /* Load flash image skipping the first block */
  37         ret = load_image(filename, dev->flash_contents + 528 * 32);
  38         if (ret < 0) {
  39             fprintf(stderr, "ret=%d\n", ret);
  40             fprintf(stderr, "qemu: could not load flash image %s\n",
  41                     filename);
  42             exit(1);
  43         } else {
  44             /* Build first block with number of blocks */
  45             blocks = (ret + 528 * 32 - 1) / (528 * 32);
  46             dev->flash_contents[0] = blocks & 0xff;
  47             dev->flash_contents[1] = (blocks >> 8) & 0xff;
  48             dev->flash_contents[2] = (blocks >> 16) & 0xff;
  49             dev->flash_contents[3] = (blocks >> 24) & 0xff;
  50             fprintf(stderr, "loaded %d bytes for %s into flash\n", ret,
  51                     filename);
  52         }
  53     }
  54 }
  55
  56 static void handle_command(tc58128_dev * dev, uint8_t command)
  57 {
  58     switch (command) {
  59     case 0xff:
  60         fprintf(stderr, "reset flash device\n");
  61         dev->state = WAIT;
  62         break;
  63     case 0x00:
  64         fprintf(stderr, "read mode 1\n");
  65         dev->state = READ1;
  66         dev->address_cycle = 0;
  67         break;
  68     case 0x01:
  69         fprintf(stderr, "read mode 2\n");
  70         dev->state = READ2;
  71         dev->address_cycle = 0;
  72         break;
  73     case 0x50:
  74         fprintf(stderr, "read mode 3\n");
  75         dev->state = READ3;
  76         dev->address_cycle = 0;
  77         break;
  78     default:
  79         fprintf(stderr, "unknown flash command 0x%02x\n", command);
  80         abort();
  81     }
  82 }
  83
  84 static void handle_address(tc58128_dev * dev, uint8_t data)
  85 {
  86     switch (dev->state) {
  87     case READ1:
  88     case READ2:
  89     case READ3:
  90         switch (dev->address_cycle) {
  91         case 0:
  92             dev->address = data;
  93             if (dev->state == READ2)
  94                 dev->address |= 0x100;
  95             else if (dev->state == READ3)
  96                 dev->address |= 0x200;
  97             break;
  98         case 1:
  99             dev->address += data * 528 * 0x100;
 100             break;
 101         case 2:
 102             dev->address += data * 528;
 103             fprintf(stderr, "address pointer in flash: 0x%08x\n",
 104                     dev->address);
 105             break;
 106         default:
 107             /* Invalid data */
 108             abort();
 109         }
 110         dev->address_cycle++;
 111         break;
 112     default:
 113         abort();
 114     }
 115 }
 116
 117 static uint8_t handle_read(tc58128_dev * dev)
 118 {
 119 #if 0
 120     if (dev->address % 0x100000 == 0)
 121         fprintf(stderr, "reading flash at address 0x%08x\n", dev->address);
 122 #endif
 123     return dev->flash_contents[dev->address++];
 124 }
 125
 126 /* We never mark the device as busy, so interrupts cannot be triggered
 127    XXXXX */
 128
 129 static int tc58128_cb(uint16_t porta, uint16_t portb,
 130                       uint16_t * periph_pdtra, uint16_t * periph_portadir,
 131                       uint16_t * periph_pdtrb, uint16_t * periph_portbdir)
 132 {
 133     int dev;
 134
 135     if ((porta & CE1) == 0)
 136         dev = 0;
 137     else if ((porta & CE2) == 0)
 138         dev = 1;
 139     else
 140         return 0;               /* No device selected */
 141
 142     if ((porta & RE) && (porta & WE)) {
 143         /* Nothing to do, assert ready and return to input state */
 144         *periph_portadir &= 0xff00;
 145         *periph_portadir |= RDY(dev);
 146         *periph_pdtra |= RDY(dev);
 147         return 1;
 148     }
 149
 150     if (porta & CLE) {
 151         /* Command */
 152         assert((porta & WE) == 0);
 153         handle_command(&tc58128_devs[dev], porta & 0x00ff);
 154     } else if (porta & ALE) {
 155         assert((porta & WE) == 0);
 156         handle_address(&tc58128_devs[dev], porta & 0x00ff);
 157     } else if ((porta & RE) == 0) {
 158         *periph_portadir |= 0x00ff;
 159         *periph_pdtra &= 0xff00;
 160         *periph_pdtra |= handle_read(&tc58128_devs[dev]);
 161     } else {
 162         abort();
 163     }
 164     return 1;
 165 }
 166
 167 static sh7750_io_device tc58128 = {
 168     RE | WE,                    /* Port A triggers */
 169     0,                          /* Port B triggers */
 170     tc58128_cb                  /* Callback */
 171 };
 172
 173 int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2)
 174 {
 175     init_dev(&tc58128_devs[0], zone1);
 176     init_dev(&tc58128_devs[1], zone2);
 177     return sh7750_register_io_device(s, &tc58128);
 178 }