hw/omap_intc.c

   1 /*
   2  * TI OMAP interrupt controller emulation.
   3  *
   4  * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
   5  * Copyright (C) 2007-2008 Nokia Corporation
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20 #include "hw.h"
  21 #include "omap.h"
  22 #include "sysbus.h"
  23
  24 /* Interrupt Handlers */
  25 struct omap_intr_handler_bank_s {
  26     uint32_t irqs;
  27     uint32_t inputs;
  28     uint32_t mask;
  29     uint32_t fiq;
  30     uint32_t sens_edge;
  31     uint32_t swi;
  32     unsigned char priority[32];
  33 };
  34
  35 struct omap_intr_handler_s {
  36     SysBusDevice busdev;
  37     qemu_irq *pins;
  38     qemu_irq parent_intr[2];
  39     MemoryRegion mmio;
  40     void *iclk;
  41     void *fclk;
  42     unsigned char nbanks;
  43     int level_only;
  44     uint32_t size;
  45
  46     uint8_t revision;
  47
  48     /* state */
  49     uint32_t new_agr[2];
  50     int sir_intr[2];
  51     int autoidle;
  52     uint32_t mask;
  53     struct omap_intr_handler_bank_s bank[3];
  54 };
  55
  56 static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq)
  57 {
  58     int i, j, sir_intr, p_intr, p, f;
  59     uint32_t level;
  60     sir_intr = 0;
  61     p_intr = 255;
  62
  63     /* Find the interrupt line with the highest dynamic priority.
  64      * Note: 0 denotes the hightest priority.
  65      * If all interrupts have the same priority, the default order is IRQ_N,
  66      * IRQ_N-1,...,IRQ_0. */
  67     for (j = 0; j < s->nbanks; ++j) {
  68         level = s->bank[j].irqs & ~s->bank[j].mask &
  69                 (is_fiq ? s->bank[j].fiq : ~s->bank[j].fiq);
  70         for (f = ffs(level), i = f - 1, level >>= f - 1; f; i += f,
  71                         level >>= f) {
  72             p = s->bank[j].priority[i];
  73             if (p <= p_intr) {
  74                 p_intr = p;
  75                 sir_intr = 32 * j + i;
  76             }
  77             f = ffs(level >> 1);
  78         }
  79     }
  80     s->sir_intr[is_fiq] = sir_intr;
  81 }
  82
  83 static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq)
  84 {
  85     int i;
  86     uint32_t has_intr = 0;
  87
  88     for (i = 0; i < s->nbanks; ++i)
  89         has_intr |= s->bank[i].irqs & ~s->bank[i].mask &
  90                 (is_fiq ? s->bank[i].fiq : ~s->bank[i].fiq);
  91
  92     if (s->new_agr[is_fiq] & has_intr & s->mask) {
  93         s->new_agr[is_fiq] = 0;
  94         omap_inth_sir_update(s, is_fiq);
  95         qemu_set_irq(s->parent_intr[is_fiq], 1);
  96     }
  97 }
  98
  99 #define INT_FALLING_EDGE        0
 100 #define INT_LOW_LEVEL           1
 101
 102 static void omap_set_intr(void *opaque, int irq, int req)
 103 {
 104     struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque;
 105     uint32_t rise;
 106
 107     struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
 108     int n = irq & 31;
 109
 110     if (req) {
 111         rise = ~bank->irqs & (1 << n);
 112         if (~bank->sens_edge & (1 << n))
 113             rise &= ~bank->inputs;
 114
 115         bank->inputs |= (1 << n);
 116         if (rise) {
 117             bank->irqs |= rise;
 118             omap_inth_update(ih, 0);
 119             omap_inth_update(ih, 1);
 120         }
 121     } else {
 122         rise = bank->sens_edge & bank->irqs & (1 << n);
 123         bank->irqs &= ~rise;
 124         bank->inputs &= ~(1 << n);
 125     }
 126 }
 127
 128 /* Simplified version with no edge detection */
 129 static void omap_set_intr_noedge(void *opaque, int irq, int req)
 130 {
 131     struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque;
 132     uint32_t rise;
 133
 134     struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
 135     int n = irq & 31;
 136
 137     if (req) {
 138         rise = ~bank->inputs & (1 << n);
 139         if (rise) {
 140             bank->irqs |= bank->inputs |= rise;
 141             omap_inth_update(ih, 0);
 142             omap_inth_update(ih, 1);
 143         }
 144     } else
 145         bank->irqs = (bank->inputs &= ~(1 << n)) | bank->swi;
 146 }
 147
 148 static uint64_t omap_inth_read(void *opaque, hwaddr addr,
 149                                unsigned size)
 150 {
 151     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 152     int i, offset = addr;
 153     int bank_no = offset >> 8;
 154     int line_no;
 155     struct omap_intr_handler_bank_s *bank = &s->bank[bank_no];
 156     offset &= 0xff;
 157
 158     switch (offset) {
 159     case 0x00:  /* ITR */
 160         return bank->irqs;
 161
 162     case 0x04:  /* MIR */
 163         return bank->mask;
 164
 165     case 0x10:  /* SIR_IRQ_CODE */
 166     case 0x14:  /* SIR_FIQ_CODE */
 167         if (bank_no != 0)
 168             break;
 169         line_no = s->sir_intr[(offset - 0x10) >> 2];
 170         bank = &s->bank[line_no >> 5];
 171         i = line_no & 31;
 172         if (((bank->sens_edge >> i) & 1) == INT_FALLING_EDGE)
 173             bank->irqs &= ~(1 << i);
 174         return line_no;
 175
 176     case 0x18:  /* CONTROL_REG */
 177         if (bank_no != 0)
 178             break;
 179         return 0;
 180
 181     case 0x1c:  /* ILR0 */
 182     case 0x20:  /* ILR1 */
 183     case 0x24:  /* ILR2 */
 184     case 0x28:  /* ILR3 */
 185     case 0x2c:  /* ILR4 */
 186     case 0x30:  /* ILR5 */
 187     case 0x34:  /* ILR6 */
 188     case 0x38:  /* ILR7 */
 189     case 0x3c:  /* ILR8 */
 190     case 0x40:  /* ILR9 */
 191     case 0x44:  /* ILR10 */
 192     case 0x48:  /* ILR11 */
 193     case 0x4c:  /* ILR12 */
 194     case 0x50:  /* ILR13 */
 195     case 0x54:  /* ILR14 */
 196     case 0x58:  /* ILR15 */
 197     case 0x5c:  /* ILR16 */
 198     case 0x60:  /* ILR17 */
 199     case 0x64:  /* ILR18 */
 200     case 0x68:  /* ILR19 */
 201     case 0x6c:  /* ILR20 */
 202     case 0x70:  /* ILR21 */
 203     case 0x74:  /* ILR22 */
 204     case 0x78:  /* ILR23 */
 205     case 0x7c:  /* ILR24 */
 206     case 0x80:  /* ILR25 */
 207     case 0x84:  /* ILR26 */
 208     case 0x88:  /* ILR27 */
 209     case 0x8c:  /* ILR28 */
 210     case 0x90:  /* ILR29 */
 211     case 0x94:  /* ILR30 */
 212     case 0x98:  /* ILR31 */
 213         i = (offset - 0x1c) >> 2;
 214         return (bank->priority[i] << 2) |
 215                 (((bank->sens_edge >> i) & 1) << 1) |
 216                 ((bank->fiq >> i) & 1);
 217
 218     case 0x9c:  /* ISR */
 219         return 0x00000000;
 220
 221     }
 222     OMAP_BAD_REG(addr);
 223     return 0;
 224 }
 225
 226 static void omap_inth_write(void *opaque, hwaddr addr,
 227                             uint64_t value, unsigned size)
 228 {
 229     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 230     int i, offset = addr;
 231     int bank_no = offset >> 8;
 232     struct omap_intr_handler_bank_s *bank = &s->bank[bank_no];
 233     offset &= 0xff;
 234
 235     switch (offset) {
 236     case 0x00:  /* ITR */
 237         /* Important: ignore the clearing if the IRQ is level-triggered and
 238            the input bit is 1 */
 239         bank->irqs &= value | (bank->inputs & bank->sens_edge);
 240         return;
 241
 242     case 0x04:  /* MIR */
 243         bank->mask = value;
 244         omap_inth_update(s, 0);
 245         omap_inth_update(s, 1);
 246         return;
 247
 248     case 0x10:  /* SIR_IRQ_CODE */
 249     case 0x14:  /* SIR_FIQ_CODE */
 250         OMAP_RO_REG(addr);
 251         break;
 252
 253     case 0x18:  /* CONTROL_REG */
 254         if (bank_no != 0)
 255             break;
 256         if (value & 2) {
 257             qemu_set_irq(s->parent_intr[1], 0);
 258             s->new_agr[1] = ~0;
 259             omap_inth_update(s, 1);
 260         }
 261         if (value & 1) {
 262             qemu_set_irq(s->parent_intr[0], 0);
 263             s->new_agr[0] = ~0;
 264             omap_inth_update(s, 0);
 265         }
 266         return;
 267
 268     case 0x1c:  /* ILR0 */
 269     case 0x20:  /* ILR1 */
 270     case 0x24:  /* ILR2 */
 271     case 0x28:  /* ILR3 */
 272     case 0x2c:  /* ILR4 */
 273     case 0x30:  /* ILR5 */
 274     case 0x34:  /* ILR6 */
 275     case 0x38:  /* ILR7 */
 276     case 0x3c:  /* ILR8 */
 277     case 0x40:  /* ILR9 */
 278     case 0x44:  /* ILR10 */
 279     case 0x48:  /* ILR11 */
 280     case 0x4c:  /* ILR12 */
 281     case 0x50:  /* ILR13 */
 282     case 0x54:  /* ILR14 */
 283     case 0x58:  /* ILR15 */
 284     case 0x5c:  /* ILR16 */
 285     case 0x60:  /* ILR17 */
 286     case 0x64:  /* ILR18 */
 287     case 0x68:  /* ILR19 */
 288     case 0x6c:  /* ILR20 */
 289     case 0x70:  /* ILR21 */
 290     case 0x74:  /* ILR22 */
 291     case 0x78:  /* ILR23 */
 292     case 0x7c:  /* ILR24 */
 293     case 0x80:  /* ILR25 */
 294     case 0x84:  /* ILR26 */
 295     case 0x88:  /* ILR27 */
 296     case 0x8c:  /* ILR28 */
 297     case 0x90:  /* ILR29 */
 298     case 0x94:  /* ILR30 */
 299     case 0x98:  /* ILR31 */
 300         i = (offset - 0x1c) >> 2;
 301         bank->priority[i] = (value >> 2) & 0x1f;
 302         bank->sens_edge &= ~(1 << i);
 303         bank->sens_edge |= ((value >> 1) & 1) << i;
 304         bank->fiq &= ~(1 << i);
 305         bank->fiq |= (value & 1) << i;
 306         return;
 307
 308     case 0x9c:  /* ISR */
 309         for (i = 0; i < 32; i ++)
 310             if (value & (1 << i)) {
 311                 omap_set_intr(s, 32 * bank_no + i, 1);
 312                 return;
 313             }
 314         return;
 315     }
 316     OMAP_BAD_REG(addr);
 317 }
 318
 319 static const MemoryRegionOps omap_inth_mem_ops = {
 320     .read = omap_inth_read,
 321     .write = omap_inth_write,
 322     .endianness = DEVICE_NATIVE_ENDIAN,
 323     .valid = {
 324         .min_access_size = 4,
 325         .max_access_size = 4,
 326     },
 327 };
 328
 329 static void omap_inth_reset(DeviceState *dev)
 330 {
 331     struct omap_intr_handler_s *s = FROM_SYSBUS(struct omap_intr_handler_s,
 332                                                 sysbus_from_qdev(dev));
 333     int i;
 334
 335     for (i = 0; i < s->nbanks; ++i){
 336         s->bank[i].irqs = 0x00000000;
 337         s->bank[i].mask = 0xffffffff;
 338         s->bank[i].sens_edge = 0x00000000;
 339         s->bank[i].fiq = 0x00000000;
 340         s->bank[i].inputs = 0x00000000;
 341         s->bank[i].swi = 0x00000000;
 342         memset(s->bank[i].priority, 0, sizeof(s->bank[i].priority));
 343
 344         if (s->level_only)
 345             s->bank[i].sens_edge = 0xffffffff;
 346     }
 347
 348     s->new_agr[0] = ~0;
 349     s->new_agr[1] = ~0;
 350     s->sir_intr[0] = 0;
 351     s->sir_intr[1] = 0;
 352     s->autoidle = 0;
 353     s->mask = ~0;
 354
 355     qemu_set_irq(s->parent_intr[0], 0);
 356     qemu_set_irq(s->parent_intr[1], 0);
 357 }
 358
 359 static int omap_intc_init(SysBusDevice *dev)
 360 {
 361     struct omap_intr_handler_s *s;
 362     s = FROM_SYSBUS(struct omap_intr_handler_s, dev);
 363     if (!s->iclk) {
 364         hw_error("omap-intc: clk not connected\n");
 365     }
 366     s->nbanks = 1;
 367     sysbus_init_irq(dev, &s->parent_intr[0]);
 368     sysbus_init_irq(dev, &s->parent_intr[1]);
 369     qdev_init_gpio_in(&dev->qdev, omap_set_intr, s->nbanks * 32);
 370     memory_region_init_io(&s->mmio, &omap_inth_mem_ops, s,
 371                           "omap-intc", s->size);
 372     sysbus_init_mmio(dev, &s->mmio);
 373     return 0;
 374 }
 375
 376 static Property omap_intc_properties[] = {
 377     DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100),
 378     DEFINE_PROP_PTR("clk", struct omap_intr_handler_s, iclk),
 379     DEFINE_PROP_END_OF_LIST(),
 380 };
 381
 382 static void omap_intc_class_init(ObjectClass *klass, void *data)
 383 {
 384     DeviceClass *dc = DEVICE_CLASS(klass);
 385     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 386
 387     k->init = omap_intc_init;
 388     dc->reset = omap_inth_reset;
 389     dc->props = omap_intc_properties;
 390 }
 391
 392 static const TypeInfo omap_intc_info = {
 393     .name          = "omap-intc",
 394     .parent        = TYPE_SYS_BUS_DEVICE,
 395     .instance_size = sizeof(struct omap_intr_handler_s),
 396     .class_init    = omap_intc_class_init,
 397 };
 398
 399 static uint64_t omap2_inth_read(void *opaque, hwaddr addr,
 400                                 unsigned size)
 401 {
 402     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 403     int offset = addr;
 404     int bank_no, line_no;
 405     struct omap_intr_handler_bank_s *bank = NULL;
 406
 407     if ((offset & 0xf80) == 0x80) {
 408         bank_no = (offset & 0x60) >> 5;
 409         if (bank_no < s->nbanks) {
 410             offset &= ~0x60;
 411             bank = &s->bank[bank_no];
 412         } else {
 413             OMAP_BAD_REG(addr);
 414             return 0;
 415         }
 416     }
 417
 418     switch (offset) {
 419     case 0x00:  /* INTC_REVISION */
 420         return s->revision;
 421
 422     case 0x10:  /* INTC_SYSCONFIG */
 423         return (s->autoidle >> 2) & 1;
 424
 425     case 0x14:  /* INTC_SYSSTATUS */
 426         return 1;                                               /* RESETDONE */
 427
 428     case 0x40:  /* INTC_SIR_IRQ */
 429         return s->sir_intr[0];
 430
 431     case 0x44:  /* INTC_SIR_FIQ */
 432         return s->sir_intr[1];
 433
 434     case 0x48:  /* INTC_CONTROL */
 435         return (!s->mask) << 2;                                 /* GLOBALMASK */
 436
 437     case 0x4c:  /* INTC_PROTECTION */
 438         return 0;
 439
 440     case 0x50:  /* INTC_IDLE */
 441         return s->autoidle & 3;
 442
 443     /* Per-bank registers */
 444     case 0x80:  /* INTC_ITR */
 445         return bank->inputs;
 446
 447     case 0x84:  /* INTC_MIR */
 448         return bank->mask;
 449
 450     case 0x88:  /* INTC_MIR_CLEAR */
 451     case 0x8c:  /* INTC_MIR_SET */
 452         return 0;
 453
 454     case 0x90:  /* INTC_ISR_SET */
 455         return bank->swi;
 456
 457     case 0x94:  /* INTC_ISR_CLEAR */
 458         return 0;
 459
 460     case 0x98:  /* INTC_PENDING_IRQ */
 461         return bank->irqs & ~bank->mask & ~bank->fiq;
 462
 463     case 0x9c:  /* INTC_PENDING_FIQ */
 464         return bank->irqs & ~bank->mask & bank->fiq;
 465
 466     /* Per-line registers */
 467     case 0x100 ... 0x300:       /* INTC_ILR */
 468         bank_no = (offset - 0x100) >> 7;
 469         if (bank_no > s->nbanks)
 470             break;
 471         bank = &s->bank[bank_no];
 472         line_no = (offset & 0x7f) >> 2;
 473         return (bank->priority[line_no] << 2) |
 474                 ((bank->fiq >> line_no) & 1);
 475     }
 476     OMAP_BAD_REG(addr);
 477     return 0;
 478 }
 479
 480 static void omap2_inth_write(void *opaque, hwaddr addr,
 481                              uint64_t value, unsigned size)
 482 {
 483     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 484     int offset = addr;
 485     int bank_no, line_no;
 486     struct omap_intr_handler_bank_s *bank = NULL;
 487
 488     if ((offset & 0xf80) == 0x80) {
 489         bank_no = (offset & 0x60) >> 5;
 490         if (bank_no < s->nbanks) {
 491             offset &= ~0x60;
 492             bank = &s->bank[bank_no];
 493         } else {
 494             OMAP_BAD_REG(addr);
 495             return;
 496         }
 497     }
 498
 499     switch (offset) {
 500     case 0x10:  /* INTC_SYSCONFIG */
 501         s->autoidle &= 4;
 502         s->autoidle |= (value & 1) << 2;
 503         if (value & 2)                                          /* SOFTRESET */
 504             omap_inth_reset(&s->busdev.qdev);
 505         return;
 506
 507     case 0x48:  /* INTC_CONTROL */
 508         s->mask = (value & 4) ? 0 : ~0;                         /* GLOBALMASK */
 509         if (value & 2) {                                        /* NEWFIQAGR */
 510             qemu_set_irq(s->parent_intr[1], 0);
 511             s->new_agr[1] = ~0;
 512             omap_inth_update(s, 1);
 513         }
 514         if (value & 1) {                                        /* NEWIRQAGR */
 515             qemu_set_irq(s->parent_intr[0], 0);
 516             s->new_agr[0] = ~0;
 517             omap_inth_update(s, 0);
 518         }
 519         return;
 520
 521     case 0x4c:  /* INTC_PROTECTION */
 522         /* TODO: Make a bitmap (or sizeof(char)map) of access privileges
 523          * for every register, see Chapter 3 and 4 for privileged mode.  */
 524         if (value & 1)
 525             fprintf(stderr, "%s: protection mode enable attempt\n",
 526                             __FUNCTION__);
 527         return;
 528
 529     case 0x50:  /* INTC_IDLE */
 530         s->autoidle &= ~3;
 531         s->autoidle |= value & 3;
 532         return;
 533
 534     /* Per-bank registers */
 535     case 0x84:  /* INTC_MIR */
 536         bank->mask = value;
 537         omap_inth_update(s, 0);
 538         omap_inth_update(s, 1);
 539         return;
 540
 541     case 0x88:  /* INTC_MIR_CLEAR */
 542         bank->mask &= ~value;
 543         omap_inth_update(s, 0);
 544         omap_inth_update(s, 1);
 545         return;
 546
 547     case 0x8c:  /* INTC_MIR_SET */
 548         bank->mask |= value;
 549         return;
 550
 551     case 0x90:  /* INTC_ISR_SET */
 552         bank->irqs |= bank->swi |= value;
 553         omap_inth_update(s, 0);
 554         omap_inth_update(s, 1);
 555         return;
 556
 557     case 0x94:  /* INTC_ISR_CLEAR */
 558         bank->swi &= ~value;
 559         bank->irqs = bank->swi & bank->inputs;
 560         return;
 561
 562     /* Per-line registers */
 563     case 0x100 ... 0x300:       /* INTC_ILR */
 564         bank_no = (offset - 0x100) >> 7;
 565         if (bank_no > s->nbanks)
 566             break;
 567         bank = &s->bank[bank_no];
 568         line_no = (offset & 0x7f) >> 2;
 569         bank->priority[line_no] = (value >> 2) & 0x3f;
 570         bank->fiq &= ~(1 << line_no);
 571         bank->fiq |= (value & 1) << line_no;
 572         return;
 573
 574     case 0x00:  /* INTC_REVISION */
 575     case 0x14:  /* INTC_SYSSTATUS */
 576     case 0x40:  /* INTC_SIR_IRQ */
 577     case 0x44:  /* INTC_SIR_FIQ */
 578     case 0x80:  /* INTC_ITR */
 579     case 0x98:  /* INTC_PENDING_IRQ */
 580     case 0x9c:  /* INTC_PENDING_FIQ */
 581         OMAP_RO_REG(addr);
 582         return;
 583     }
 584     OMAP_BAD_REG(addr);
 585 }
 586
 587 static const MemoryRegionOps omap2_inth_mem_ops = {
 588     .read = omap2_inth_read,
 589     .write = omap2_inth_write,
 590     .endianness = DEVICE_NATIVE_ENDIAN,
 591     .valid = {
 592         .min_access_size = 4,
 593         .max_access_size = 4,
 594     },
 595 };
 596
 597 static int omap2_intc_init(SysBusDevice *dev)
 598 {
 599     struct omap_intr_handler_s *s;
 600     s = FROM_SYSBUS(struct omap_intr_handler_s, dev);
 601     if (!s->iclk) {
 602         hw_error("omap2-intc: iclk not connected\n");
 603     }
 604     if (!s->fclk) {
 605         hw_error("omap2-intc: fclk not connected\n");
 606     }
 607     s->level_only = 1;
 608     s->nbanks = 3;
 609     sysbus_init_irq(dev, &s->parent_intr[0]);
 610     sysbus_init_irq(dev, &s->parent_intr[1]);
 611     qdev_init_gpio_in(&dev->qdev, omap_set_intr_noedge, s->nbanks * 32);
 612     memory_region_init_io(&s->mmio, &omap2_inth_mem_ops, s,
 613                           "omap2-intc", 0x1000);
 614     sysbus_init_mmio(dev, &s->mmio);
 615     return 0;
 616 }
 617
 618 static Property omap2_intc_properties[] = {
 619     DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s,
 620     revision, 0x21),
 621     DEFINE_PROP_PTR("iclk", struct omap_intr_handler_s, iclk),
 622     DEFINE_PROP_PTR("fclk", struct omap_intr_handler_s, fclk),
 623     DEFINE_PROP_END_OF_LIST(),
 624 };
 625
 626 static void omap2_intc_class_init(ObjectClass *klass, void *data)
 627 {
 628     DeviceClass *dc = DEVICE_CLASS(klass);
 629     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 630
 631     k->init = omap2_intc_init;
 632     dc->reset = omap_inth_reset;
 633     dc->props = omap2_intc_properties;
 634 }
 635
 636 static const TypeInfo omap2_intc_info = {
 637     .name          = "omap2-intc",
 638     .parent        = TYPE_SYS_BUS_DEVICE,
 639     .instance_size = sizeof(struct omap_intr_handler_s),
 640     .class_init    = omap2_intc_class_init,
 641 };
 642
 643 static void omap_intc_register_types(void)
 644 {
 645     type_register_static(&omap_intc_info);
 646     type_register_static(&omap2_intc_info);
 647 }
 648
 649 type_init(omap_intc_register_types)