util/osdep.c

   1 /*
   2  * QEMU low level functions
   3  *
   4  * Copyright (c) 2003 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #include <stdlib.h>
  25 #include <stdio.h>
  26 #include <stdarg.h>
  27 #include <stdbool.h>
  28 #include <string.h>
  29 #include <errno.h>
  30 #include <unistd.h>
  31 #include <fcntl.h>
  32
  33 /* Needed early for CONFIG_BSD etc. */
  34 #include "config-host.h"
  35
  36 #if defined(CONFIG_MADVISE) || defined(CONFIG_POSIX_MADVISE)
  37 #include <sys/mman.h>
  38 #endif
  39
  40 #ifdef CONFIG_SOLARIS
  41 #include <sys/types.h>
  42 #include <sys/statvfs.h>
  43 /* See MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156) for
  44    discussion about Solaris header problems */
  45 extern int madvise(caddr_t, size_t, int);
  46 #endif
  47
  48 #include "qemu-common.h"
  49 #include "trace.h"
  50 #include "qemu/sockets.h"
  51 #include "monitor/monitor.h"
  52
  53 static bool fips_enabled = false;
  54
  55 static const char *qemu_version = QEMU_VERSION;
  56
  57 int socket_set_cork(int fd, int v)
  58 {
  59 #if defined(SOL_TCP) && defined(TCP_CORK)
  60     return qemu_setsockopt(fd, SOL_TCP, TCP_CORK, &v, sizeof(v));
  61 #else
  62     return 0;
  63 #endif
  64 }
  65
  66 int socket_set_nodelay(int fd)
  67 {
  68     int v = 1;
  69     return qemu_setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &v, sizeof(v));
  70 }
  71
  72 int qemu_madvise(void *addr, size_t len, int advice)
  73 {
  74     if (advice == QEMU_MADV_INVALID) {
  75         errno = EINVAL;
  76         return -1;
  77     }
  78 #if defined(CONFIG_MADVISE)
  79     return madvise(addr, len, advice);
  80 #elif defined(CONFIG_POSIX_MADVISE)
  81     return posix_madvise(addr, len, advice);
  82 #else
  83     errno = EINVAL;
  84     return -1;
  85 #endif
  86 }
  87
  88 #ifndef _WIN32
  89 /*
  90  * Dups an fd and sets the flags
  91  */
  92 static int qemu_dup_flags(int fd, int flags)
  93 {
  94     int ret;
  95     int serrno;
  96     int dup_flags;
  97
  98 #ifdef F_DUPFD_CLOEXEC
  99     ret = fcntl(fd, F_DUPFD_CLOEXEC, 0);
 100 #else
 101     ret = dup(fd);
 102     if (ret != -1) {
 103         qemu_set_cloexec(ret);
 104     }
 105 #endif
 106     if (ret == -1) {
 107         goto fail;
 108     }
 109
 110     dup_flags = fcntl(ret, F_GETFL);
 111     if (dup_flags == -1) {
 112         goto fail;
 113     }
 114
 115     if ((flags & O_SYNC) != (dup_flags & O_SYNC)) {
 116         errno = EINVAL;
 117         goto fail;
 118     }
 119
 120     /* Set/unset flags that we can with fcntl */
 121     if (fcntl(ret, F_SETFL, flags) == -1) {
 122         goto fail;
 123     }
 124
 125     /* Truncate the file in the cases that open() would truncate it */
 126     if (flags & O_TRUNC ||
 127             ((flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))) {
 128         if (ftruncate(ret, 0) == -1) {
 129             goto fail;
 130         }
 131     }
 132
 133     return ret;
 134
 135 fail:
 136     serrno = errno;
 137     if (ret != -1) {
 138         close(ret);
 139     }
 140     errno = serrno;
 141     return -1;
 142 }
 143
 144 static int qemu_parse_fdset(const char *param)
 145 {
 146     return qemu_parse_fd(param);
 147 }
 148 #endif
 149
 150 /*
 151  * Opens a file with FD_CLOEXEC set
 152  */
 153 int qemu_open(const char *name, int flags, ...)
 154 {
 155     int ret;
 156     int mode = 0;
 157
 158 #ifndef _WIN32
 159     const char *fdset_id_str;
 160
 161     /* Attempt dup of fd from fd set */
 162     if (strstart(name, "/dev/fdset/", &fdset_id_str)) {
 163         int64_t fdset_id;
 164         int fd, dupfd;
 165
 166         fdset_id = qemu_parse_fdset(fdset_id_str);
 167         if (fdset_id == -1) {
 168             errno = EINVAL;
 169             return -1;
 170         }
 171
 172         fd = monitor_fdset_get_fd(fdset_id, flags);
 173         if (fd == -1) {
 174             return -1;
 175         }
 176
 177         dupfd = qemu_dup_flags(fd, flags);
 178         if (dupfd == -1) {
 179             return -1;
 180         }
 181
 182         ret = monitor_fdset_dup_fd_add(fdset_id, dupfd);
 183         if (ret == -1) {
 184             close(dupfd);
 185             errno = EINVAL;
 186             return -1;
 187         }
 188
 189         return dupfd;
 190     }
 191 #endif
 192
 193     if (flags & O_CREAT) {
 194         va_list ap;
 195
 196         va_start(ap, flags);
 197         mode = va_arg(ap, int);
 198         va_end(ap);
 199     }
 200
 201 #ifdef O_CLOEXEC
 202     ret = open(name, flags | O_CLOEXEC, mode);
 203 #else
 204     ret = open(name, flags, mode);
 205     if (ret >= 0) {
 206         qemu_set_cloexec(ret);
 207     }
 208 #endif
 209
 210     return ret;
 211 }
 212
 213 int qemu_close(int fd)
 214 {
 215     int64_t fdset_id;
 216
 217     /* Close fd that was dup'd from an fdset */
 218     fdset_id = monitor_fdset_dup_fd_find(fd);
 219     if (fdset_id != -1) {
 220         int ret;
 221
 222         ret = close(fd);
 223         if (ret == 0) {
 224             monitor_fdset_dup_fd_remove(fd);
 225         }
 226
 227         return ret;
 228     }
 229
 230     return close(fd);
 231 }
 232
 233 /*
 234  * A variant of write(2) which handles partial write.
 235  *
 236  * Return the number of bytes transferred.
 237  * Set errno if fewer than `count' bytes are written.
 238  *
 239  * This function don't work with non-blocking fd's.
 240  * Any of the possibilities with non-bloking fd's is bad:
 241  *   - return a short write (then name is wrong)
 242  *   - busy wait adding (errno == EAGAIN) to the loop
 243  */
 244 ssize_t qemu_write_full(int fd, const void *buf, size_t count)
 245 {
 246     ssize_t ret = 0;
 247     ssize_t total = 0;
 248
 249     while (count) {
 250         ret = write(fd, buf, count);
 251         if (ret < 0) {
 252             if (errno == EINTR)
 253                 continue;
 254             break;
 255         }
 256
 257         count -= ret;
 258         buf += ret;
 259         total += ret;
 260     }
 261
 262     return total;
 263 }
 264
 265 /*
 266  * Opens a socket with FD_CLOEXEC set
 267  */
 268 int qemu_socket(int domain, int type, int protocol)
 269 {
 270     int ret;
 271
 272 #ifdef SOCK_CLOEXEC
 273     ret = socket(domain, type | SOCK_CLOEXEC, protocol);
 274     if (ret != -1 || errno != EINVAL) {
 275         return ret;
 276     }
 277 #endif
 278     ret = socket(domain, type, protocol);
 279     if (ret >= 0) {
 280         qemu_set_cloexec(ret);
 281     }
 282
 283     return ret;
 284 }
 285
 286 /*
 287  * Accept a connection and set FD_CLOEXEC
 288  */
 289 int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen)
 290 {
 291     int ret;
 292
 293 #ifdef CONFIG_ACCEPT4
 294     ret = accept4(s, addr, addrlen, SOCK_CLOEXEC);
 295     if (ret != -1 || errno != ENOSYS) {
 296         return ret;
 297     }
 298 #endif
 299     ret = accept(s, addr, addrlen);
 300     if (ret >= 0) {
 301         qemu_set_cloexec(ret);
 302     }
 303
 304     return ret;
 305 }
 306
 307 /*
 308  * A variant of send(2) which handles partial write.
 309  *
 310  * Return the number of bytes transferred, which is only
 311  * smaller than `count' if there is an error.
 312  *
 313  * This function won't work with non-blocking fd's.
 314  * Any of the possibilities with non-bloking fd's is bad:
 315  *   - return a short write (then name is wrong)
 316  *   - busy wait adding (errno == EAGAIN) to the loop
 317  */
 318 ssize_t qemu_send_full(int fd, const void *buf, size_t count, int flags)
 319 {
 320     ssize_t ret = 0;
 321     ssize_t total = 0;
 322
 323     while (count) {
 324         ret = send(fd, buf, count, flags);
 325         if (ret < 0) {
 326             if (errno == EINTR) {
 327                 continue;
 328             }
 329             break;
 330         }
 331
 332         count -= ret;
 333         buf += ret;
 334         total += ret;
 335     }
 336
 337     return total;
 338 }
 339
 340 /*
 341  * A variant of recv(2) which handles partial write.
 342  *
 343  * Return the number of bytes transferred, which is only
 344  * smaller than `count' if there is an error.
 345  *
 346  * This function won't work with non-blocking fd's.
 347  * Any of the possibilities with non-bloking fd's is bad:
 348  *   - return a short write (then name is wrong)
 349  *   - busy wait adding (errno == EAGAIN) to the loop
 350  */
 351 ssize_t qemu_recv_full(int fd, void *buf, size_t count, int flags)
 352 {
 353     ssize_t ret = 0;
 354     ssize_t total = 0;
 355
 356     while (count) {
 357         ret = qemu_recv(fd, buf, count, flags);
 358         if (ret <= 0) {
 359             if (ret < 0 && errno == EINTR) {
 360                 continue;
 361             }
 362             break;
 363         }
 364
 365         count -= ret;
 366         buf += ret;
 367         total += ret;
 368     }
 369
 370     return total;
 371 }
 372
 373 void qemu_set_version(const char *version)
 374 {
 375     qemu_version = version;
 376 }
 377
 378 const char *qemu_get_version(void)
 379 {
 380     return qemu_version;
 381 }
 382
 383 void fips_set_state(bool requested)
 384 {
 385 #ifdef __linux__
 386     if (requested) {
 387         FILE *fds = fopen("/proc/sys/crypto/fips_enabled", "r");
 388         if (fds != NULL) {
 389             fips_enabled = (fgetc(fds) == '1');
 390             fclose(fds);
 391         }
 392     }
 393 #else
 394     fips_enabled = false;
 395 #endif /* __linux__ */
 396
 397 #ifdef _FIPS_DEBUG
 398     fprintf(stderr, "FIPS mode %s (requested %s)\n",
 399             (fips_enabled ? "enabled" : "disabled"),
 400             (requested ? "enabled" : "disabled"));
 401 #endif
 402 }
 403
 404 bool fips_get_state(void)
 405 {
 406     return fips_enabled;
 407 }
 408
 409 #ifdef _WIN32
 410 static void socket_cleanup(void)
 411 {
 412     WSACleanup();
 413 }
 414 #endif
 415
 416 int socket_init(void)
 417 {
 418 #ifdef _WIN32
 419     WSADATA Data;
 420     int ret, err;
 421
 422     ret = WSAStartup(MAKEWORD(2, 2), &Data);
 423     if (ret != 0) {
 424         err = WSAGetLastError();
 425         fprintf(stderr, "WSAStartup: %d\n", err);
 426         return -1;
 427     }
 428     atexit(socket_cleanup);
 429 #endif
 430     return 0;
 431 }