2 * QEMU Sparc SLAVIO interrupt controller emulation
4 * Copyright (c) 2003-2005 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #include "hw/sparc/sun4m.h"
26 #include "monitor/monitor.h"
27 #include "hw/sysbus.h"
30 //#define DEBUG_IRQ_COUNT
33 * Registers of interrupt controller in sun4m.
35 * This is the interrupt controller part of chip STP2001 (Slave I/O), also
36 * produced as NCR89C105. See
37 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
39 * There is a system master controller and one for each cpu.
46 struct SLAVIO_INTCTLState
;
48 typedef struct SLAVIO_CPUINTCTLState
{
50 struct SLAVIO_INTCTLState
*master
;
51 uint32_t intreg_pending
;
54 } SLAVIO_CPUINTCTLState
;
56 typedef struct SLAVIO_INTCTLState
{
59 #ifdef DEBUG_IRQ_COUNT
60 uint64_t irq_count
[32];
62 qemu_irq cpu_irqs
[MAX_CPUS
][MAX_PILS
];
63 SLAVIO_CPUINTCTLState slaves
[MAX_CPUS
];
64 uint32_t intregm_pending
;
65 uint32_t intregm_disabled
;
69 #define INTCTL_MAXADDR 0xf
70 #define INTCTL_SIZE (INTCTL_MAXADDR + 1)
71 #define INTCTLM_SIZE 0x14
72 #define MASTER_IRQ_MASK ~0x0fa2007f
73 #define MASTER_DISABLE 0x80000000
74 #define CPU_SOFTIRQ_MASK 0xfffe0000
75 #define CPU_IRQ_INT15_IN (1 << 15)
76 #define CPU_IRQ_TIMER_IN (1 << 14)
78 static void slavio_check_interrupts(SLAVIO_INTCTLState
*s
, int set_irqs
);
80 // per-cpu interrupt controller
81 static uint64_t slavio_intctl_mem_readl(void *opaque
, hwaddr addr
,
84 SLAVIO_CPUINTCTLState
*s
= opaque
;
90 ret
= s
->intreg_pending
;
96 trace_slavio_intctl_mem_readl(s
->cpu
, addr
, ret
);
101 static void slavio_intctl_mem_writel(void *opaque
, hwaddr addr
,
102 uint64_t val
, unsigned size
)
104 SLAVIO_CPUINTCTLState
*s
= opaque
;
108 trace_slavio_intctl_mem_writel(s
->cpu
, addr
, val
);
110 case 1: // clear pending softints
111 val
&= CPU_SOFTIRQ_MASK
| CPU_IRQ_INT15_IN
;
112 s
->intreg_pending
&= ~val
;
113 slavio_check_interrupts(s
->master
, 1);
114 trace_slavio_intctl_mem_writel_clear(s
->cpu
, val
, s
->intreg_pending
);
116 case 2: // set softint
117 val
&= CPU_SOFTIRQ_MASK
;
118 s
->intreg_pending
|= val
;
119 slavio_check_interrupts(s
->master
, 1);
120 trace_slavio_intctl_mem_writel_set(s
->cpu
, val
, s
->intreg_pending
);
127 static const MemoryRegionOps slavio_intctl_mem_ops
= {
128 .read
= slavio_intctl_mem_readl
,
129 .write
= slavio_intctl_mem_writel
,
130 .endianness
= DEVICE_NATIVE_ENDIAN
,
132 .min_access_size
= 4,
133 .max_access_size
= 4,
137 // master system interrupt controller
138 static uint64_t slavio_intctlm_mem_readl(void *opaque
, hwaddr addr
,
141 SLAVIO_INTCTLState
*s
= opaque
;
147 ret
= s
->intregm_pending
& ~MASTER_DISABLE
;
150 ret
= s
->intregm_disabled
& MASTER_IRQ_MASK
;
159 trace_slavio_intctlm_mem_readl(addr
, ret
);
164 static void slavio_intctlm_mem_writel(void *opaque
, hwaddr addr
,
165 uint64_t val
, unsigned size
)
167 SLAVIO_INTCTLState
*s
= opaque
;
171 trace_slavio_intctlm_mem_writel(addr
, val
);
173 case 2: // clear (enable)
174 // Force clear unused bits
175 val
&= MASTER_IRQ_MASK
;
176 s
->intregm_disabled
&= ~val
;
177 trace_slavio_intctlm_mem_writel_enable(val
, s
->intregm_disabled
);
178 slavio_check_interrupts(s
, 1);
180 case 3: // set (disable; doesn't affect pending)
181 // Force clear unused bits
182 val
&= MASTER_IRQ_MASK
;
183 s
->intregm_disabled
|= val
;
184 slavio_check_interrupts(s
, 1);
185 trace_slavio_intctlm_mem_writel_disable(val
, s
->intregm_disabled
);
188 s
->target_cpu
= val
& (MAX_CPUS
- 1);
189 slavio_check_interrupts(s
, 1);
190 trace_slavio_intctlm_mem_writel_target(s
->target_cpu
);
197 static const MemoryRegionOps slavio_intctlm_mem_ops
= {
198 .read
= slavio_intctlm_mem_readl
,
199 .write
= slavio_intctlm_mem_writel
,
200 .endianness
= DEVICE_NATIVE_ENDIAN
,
202 .min_access_size
= 4,
203 .max_access_size
= 4,
207 void slavio_pic_info(Monitor
*mon
, DeviceState
*dev
)
210 SLAVIO_INTCTLState
*s
;
213 sd
= SYS_BUS_DEVICE(dev
);
214 s
= FROM_SYSBUS(SLAVIO_INTCTLState
, sd
);
215 for (i
= 0; i
< MAX_CPUS
; i
++) {
216 monitor_printf(mon
, "per-cpu %d: pending 0x%08x\n", i
,
217 s
->slaves
[i
].intreg_pending
);
219 monitor_printf(mon
, "master: pending 0x%08x, disabled 0x%08x\n",
220 s
->intregm_pending
, s
->intregm_disabled
);
223 void slavio_irq_info(Monitor
*mon
, DeviceState
*dev
)
225 #ifndef DEBUG_IRQ_COUNT
226 monitor_printf(mon
, "irq statistic code not compiled.\n");
229 SLAVIO_INTCTLState
*s
;
233 sd
= SYS_BUS_DEVICE(dev
);
234 s
= FROM_SYSBUS(SLAVIO_INTCTLState
, sd
);
235 monitor_printf(mon
, "IRQ statistics:\n");
236 for (i
= 0; i
< 32; i
++) {
237 count
= s
->irq_count
[i
];
239 monitor_printf(mon
, "%2d: %" PRId64
"\n", i
, count
);
244 static const uint32_t intbit_to_level
[] = {
245 2, 3, 5, 7, 9, 11, 13, 2, 3, 5, 7, 9, 11, 13, 12, 12,
246 6, 13, 4, 10, 8, 9, 11, 0, 0, 0, 0, 15, 15, 15, 15, 0,
249 static void slavio_check_interrupts(SLAVIO_INTCTLState
*s
, int set_irqs
)
251 uint32_t pending
= s
->intregm_pending
, pil_pending
;
254 pending
&= ~s
->intregm_disabled
;
256 trace_slavio_check_interrupts(pending
, s
->intregm_disabled
);
257 for (i
= 0; i
< MAX_CPUS
; i
++) {
260 /* If we are the current interrupt target, get hard interrupts */
261 if (pending
&& !(s
->intregm_disabled
& MASTER_DISABLE
) &&
262 (i
== s
->target_cpu
)) {
263 for (j
= 0; j
< 32; j
++) {
264 if ((pending
& (1 << j
)) && intbit_to_level
[j
]) {
265 pil_pending
|= 1 << intbit_to_level
[j
];
270 /* Calculate current pending hard interrupts for display */
271 s
->slaves
[i
].intreg_pending
&= CPU_SOFTIRQ_MASK
| CPU_IRQ_INT15_IN
|
273 if (i
== s
->target_cpu
) {
274 for (j
= 0; j
< 32; j
++) {
275 if ((s
->intregm_pending
& (1 << j
)) && intbit_to_level
[j
]) {
276 s
->slaves
[i
].intreg_pending
|= 1 << intbit_to_level
[j
];
281 /* Level 15 and CPU timer interrupts are only masked when
282 the MASTER_DISABLE bit is set */
283 if (!(s
->intregm_disabled
& MASTER_DISABLE
)) {
284 pil_pending
|= s
->slaves
[i
].intreg_pending
&
285 (CPU_IRQ_INT15_IN
| CPU_IRQ_TIMER_IN
);
288 /* Add soft interrupts */
289 pil_pending
|= (s
->slaves
[i
].intreg_pending
& CPU_SOFTIRQ_MASK
) >> 16;
292 /* Since there is not really an interrupt 0 (and pil_pending
293 * and irl_out bit zero are thus always zero) there is no need
294 * to do anything with cpu_irqs[i][0] and it is OK not to do
295 * the j=0 iteration of this loop.
297 for (j
= MAX_PILS
-1; j
> 0; j
--) {
298 if (pil_pending
& (1 << j
)) {
299 if (!(s
->slaves
[i
].irl_out
& (1 << j
))) {
300 qemu_irq_raise(s
->cpu_irqs
[i
][j
]);
303 if (s
->slaves
[i
].irl_out
& (1 << j
)) {
304 qemu_irq_lower(s
->cpu_irqs
[i
][j
]);
309 s
->slaves
[i
].irl_out
= pil_pending
;
314 * "irq" here is the bit number in the system interrupt register to
315 * separate serial and keyboard interrupts sharing a level.
317 static void slavio_set_irq(void *opaque
, int irq
, int level
)
319 SLAVIO_INTCTLState
*s
= opaque
;
320 uint32_t mask
= 1 << irq
;
321 uint32_t pil
= intbit_to_level
[irq
];
324 trace_slavio_set_irq(s
->target_cpu
, irq
, pil
, level
);
327 #ifdef DEBUG_IRQ_COUNT
330 s
->intregm_pending
|= mask
;
332 for (i
= 0; i
< MAX_CPUS
; i
++) {
333 s
->slaves
[i
].intreg_pending
|= 1 << pil
;
337 s
->intregm_pending
&= ~mask
;
339 for (i
= 0; i
< MAX_CPUS
; i
++) {
340 s
->slaves
[i
].intreg_pending
&= ~(1 << pil
);
344 slavio_check_interrupts(s
, 1);
348 static void slavio_set_timer_irq_cpu(void *opaque
, int cpu
, int level
)
350 SLAVIO_INTCTLState
*s
= opaque
;
352 trace_slavio_set_timer_irq_cpu(cpu
, level
);
355 s
->slaves
[cpu
].intreg_pending
|= CPU_IRQ_TIMER_IN
;
357 s
->slaves
[cpu
].intreg_pending
&= ~CPU_IRQ_TIMER_IN
;
360 slavio_check_interrupts(s
, 1);
363 static void slavio_set_irq_all(void *opaque
, int irq
, int level
)
366 slavio_set_irq(opaque
, irq
, level
);
368 slavio_set_timer_irq_cpu(opaque
, irq
- 32, level
);
372 static int vmstate_intctl_post_load(void *opaque
, int version_id
)
374 SLAVIO_INTCTLState
*s
= opaque
;
376 slavio_check_interrupts(s
, 0);
380 static const VMStateDescription vmstate_intctl_cpu
= {
381 .name
="slavio_intctl_cpu",
383 .minimum_version_id
= 1,
384 .minimum_version_id_old
= 1,
385 .fields
= (VMStateField
[]) {
386 VMSTATE_UINT32(intreg_pending
, SLAVIO_CPUINTCTLState
),
387 VMSTATE_END_OF_LIST()
391 static const VMStateDescription vmstate_intctl
= {
392 .name
="slavio_intctl",
394 .minimum_version_id
= 1,
395 .minimum_version_id_old
= 1,
396 .post_load
= vmstate_intctl_post_load
,
397 .fields
= (VMStateField
[]) {
398 VMSTATE_STRUCT_ARRAY(slaves
, SLAVIO_INTCTLState
, MAX_CPUS
, 1,
399 vmstate_intctl_cpu
, SLAVIO_CPUINTCTLState
),
400 VMSTATE_UINT32(intregm_pending
, SLAVIO_INTCTLState
),
401 VMSTATE_UINT32(intregm_disabled
, SLAVIO_INTCTLState
),
402 VMSTATE_UINT32(target_cpu
, SLAVIO_INTCTLState
),
403 VMSTATE_END_OF_LIST()
407 static void slavio_intctl_reset(DeviceState
*d
)
409 SLAVIO_INTCTLState
*s
= container_of(d
, SLAVIO_INTCTLState
, busdev
.qdev
);
412 for (i
= 0; i
< MAX_CPUS
; i
++) {
413 s
->slaves
[i
].intreg_pending
= 0;
414 s
->slaves
[i
].irl_out
= 0;
416 s
->intregm_disabled
= ~MASTER_IRQ_MASK
;
417 s
->intregm_pending
= 0;
419 slavio_check_interrupts(s
, 0);
422 static int slavio_intctl_init1(SysBusDevice
*dev
)
424 SLAVIO_INTCTLState
*s
= FROM_SYSBUS(SLAVIO_INTCTLState
, dev
);
428 qdev_init_gpio_in(&dev
->qdev
, slavio_set_irq_all
, 32 + MAX_CPUS
);
429 memory_region_init_io(&s
->iomem
, &slavio_intctlm_mem_ops
, s
,
430 "master-interrupt-controller", INTCTLM_SIZE
);
431 sysbus_init_mmio(dev
, &s
->iomem
);
433 for (i
= 0; i
< MAX_CPUS
; i
++) {
434 snprintf(slave_name
, sizeof(slave_name
),
435 "slave-interrupt-controller-%i", i
);
436 for (j
= 0; j
< MAX_PILS
; j
++) {
437 sysbus_init_irq(dev
, &s
->cpu_irqs
[i
][j
]);
439 memory_region_init_io(&s
->slaves
[i
].iomem
, &slavio_intctl_mem_ops
,
440 &s
->slaves
[i
], slave_name
, INTCTL_SIZE
);
441 sysbus_init_mmio(dev
, &s
->slaves
[i
].iomem
);
442 s
->slaves
[i
].cpu
= i
;
443 s
->slaves
[i
].master
= s
;
449 static void slavio_intctl_class_init(ObjectClass
*klass
, void *data
)
451 DeviceClass
*dc
= DEVICE_CLASS(klass
);
452 SysBusDeviceClass
*k
= SYS_BUS_DEVICE_CLASS(klass
);
454 k
->init
= slavio_intctl_init1
;
455 dc
->reset
= slavio_intctl_reset
;
456 dc
->vmsd
= &vmstate_intctl
;
459 static const TypeInfo slavio_intctl_info
= {
460 .name
= "slavio_intctl",
461 .parent
= TYPE_SYS_BUS_DEVICE
,
462 .instance_size
= sizeof(SLAVIO_INTCTLState
),
463 .class_init
= slavio_intctl_class_init
,
466 static void slavio_intctl_register_types(void)
468 type_register_static(&slavio_intctl_info
);
471 type_init(slavio_intctl_register_types
)