hw/bt-hid.c

   1 /*
   2  * QEMU Bluetooth HID Profile wrapper for USB HID.
   3  *
   4  * Copyright (C) 2007-2008 OpenMoko, Inc.
   5  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "qemu-common.h"
  22 #include "qemu/timer.h"
  23 #include "ui/console.h"
  24 #include "hw/hid.h"
  25 #include "hw/bt.h"
  26
  27 enum hid_transaction_req {
  28     BT_HANDSHAKE                        = 0x0,
  29     BT_HID_CONTROL                      = 0x1,
  30     BT_GET_REPORT                       = 0x4,
  31     BT_SET_REPORT                       = 0x5,
  32     BT_GET_PROTOCOL                     = 0x6,
  33     BT_SET_PROTOCOL                     = 0x7,
  34     BT_GET_IDLE                         = 0x8,
  35     BT_SET_IDLE                         = 0x9,
  36     BT_DATA                             = 0xa,
  37     BT_DATC                             = 0xb,
  38 };
  39
  40 enum hid_transaction_handshake {
  41     BT_HS_SUCCESSFUL                    = 0x0,
  42     BT_HS_NOT_READY                     = 0x1,
  43     BT_HS_ERR_INVALID_REPORT_ID         = 0x2,
  44     BT_HS_ERR_UNSUPPORTED_REQUEST       = 0x3,
  45     BT_HS_ERR_INVALID_PARAMETER         = 0x4,
  46     BT_HS_ERR_UNKNOWN                   = 0xe,
  47     BT_HS_ERR_FATAL                     = 0xf,
  48 };
  49
  50 enum hid_transaction_control {
  51     BT_HC_NOP                           = 0x0,
  52     BT_HC_HARD_RESET                    = 0x1,
  53     BT_HC_SOFT_RESET                    = 0x2,
  54     BT_HC_SUSPEND                       = 0x3,
  55     BT_HC_EXIT_SUSPEND                  = 0x4,
  56     BT_HC_VIRTUAL_CABLE_UNPLUG          = 0x5,
  57 };
  58
  59 enum hid_protocol {
  60     BT_HID_PROTO_BOOT                   = 0,
  61     BT_HID_PROTO_REPORT                 = 1,
  62 };
  63
  64 enum hid_boot_reportid {
  65     BT_HID_BOOT_INVALID                 = 0,
  66     BT_HID_BOOT_KEYBOARD,
  67     BT_HID_BOOT_MOUSE,
  68 };
  69
  70 enum hid_data_pkt {
  71     BT_DATA_OTHER                       = 0,
  72     BT_DATA_INPUT,
  73     BT_DATA_OUTPUT,
  74     BT_DATA_FEATURE,
  75 };
  76
  77 #define BT_HID_MTU                      48
  78
  79 /* HID interface requests */
  80 #define GET_REPORT                      0xa101
  81 #define GET_IDLE                        0xa102
  82 #define GET_PROTOCOL                    0xa103
  83 #define SET_REPORT                      0x2109
  84 #define SET_IDLE                        0x210a
  85 #define SET_PROTOCOL                    0x210b
  86
  87 struct bt_hid_device_s {
  88     struct bt_l2cap_device_s btdev;
  89     struct bt_l2cap_conn_params_s *control;
  90     struct bt_l2cap_conn_params_s *interrupt;
  91     HIDState hid;
  92
  93     int proto;
  94     int connected;
  95     int data_type;
  96     int intr_state;
  97     struct {
  98         int len;
  99         uint8_t buffer[1024];
 100     } dataother, datain, dataout, feature, intrdataout;
 101     enum {
 102         bt_state_ready,
 103         bt_state_transaction,
 104         bt_state_suspend,
 105     } state;
 106 };
 107
 108 static void bt_hid_reset(struct bt_hid_device_s *s)
 109 {
 110     struct bt_scatternet_s *net = s->btdev.device.net;
 111
 112     /* Go as far as... */
 113     bt_l2cap_device_done(&s->btdev);
 114     bt_l2cap_device_init(&s->btdev, net);
 115
 116     hid_reset(&s->hid);
 117     s->proto = BT_HID_PROTO_REPORT;
 118     s->state = bt_state_ready;
 119     s->dataother.len = 0;
 120     s->datain.len = 0;
 121     s->dataout.len = 0;
 122     s->feature.len = 0;
 123     s->intrdataout.len = 0;
 124     s->intr_state = 0;
 125 }
 126
 127 static int bt_hid_out(struct bt_hid_device_s *s)
 128 {
 129     if (s->data_type == BT_DATA_OUTPUT) {
 130         /* nothing */
 131         ;
 132     }
 133
 134     if (s->data_type == BT_DATA_FEATURE) {
 135         /* XXX:
 136          * does this send a USB_REQ_CLEAR_FEATURE/USB_REQ_SET_FEATURE
 137          * or a SET_REPORT? */
 138         ;
 139     }
 140
 141     return -1;
 142 }
 143
 144 static int bt_hid_in(struct bt_hid_device_s *s)
 145 {
 146     s->datain.len = hid_keyboard_poll(&s->hid, s->datain.buffer,
 147                                       sizeof(s->datain.buffer));
 148     return s->datain.len;
 149 }
 150
 151 static void bt_hid_send_handshake(struct bt_hid_device_s *s, int result)
 152 {
 153     *s->control->sdu_out(s->control, 1) =
 154             (BT_HANDSHAKE << 4) | result;
 155     s->control->sdu_submit(s->control);
 156 }
 157
 158 static void bt_hid_send_control(struct bt_hid_device_s *s, int operation)
 159 {
 160     *s->control->sdu_out(s->control, 1) =
 161             (BT_HID_CONTROL << 4) | operation;
 162     s->control->sdu_submit(s->control);
 163 }
 164
 165 static void bt_hid_disconnect(struct bt_hid_device_s *s)
 166 {
 167     /* Disconnect s->control and s->interrupt */
 168 }
 169
 170 static void bt_hid_send_data(struct bt_l2cap_conn_params_s *ch, int type,
 171                 const uint8_t *data, int len)
 172 {
 173     uint8_t *pkt, hdr = (BT_DATA << 4) | type;
 174     int plen;
 175
 176     do {
 177         plen = MIN(len, ch->remote_mtu - 1);
 178         pkt = ch->sdu_out(ch, plen + 1);
 179
 180         pkt[0] = hdr;
 181         if (plen)
 182             memcpy(pkt + 1, data, plen);
 183         ch->sdu_submit(ch);
 184
 185         len -= plen;
 186         data += plen;
 187         hdr = (BT_DATC << 4) | type;
 188     } while (plen == ch->remote_mtu - 1);
 189 }
 190
 191 static void bt_hid_control_transaction(struct bt_hid_device_s *s,
 192                 const uint8_t *data, int len)
 193 {
 194     uint8_t type, parameter;
 195     int rlen, ret = -1;
 196     if (len < 1)
 197         return;
 198
 199     type = data[0] >> 4;
 200     parameter = data[0] & 0xf;
 201
 202     switch (type) {
 203     case BT_HANDSHAKE:
 204     case BT_DATA:
 205         switch (parameter) {
 206         default:
 207             /* These are not expected to be sent this direction.  */
 208             ret = BT_HS_ERR_INVALID_PARAMETER;
 209         }
 210         break;
 211
 212     case BT_HID_CONTROL:
 213         if (len != 1 || (parameter != BT_HC_VIRTUAL_CABLE_UNPLUG &&
 214                                 s->state == bt_state_transaction)) {
 215             ret = BT_HS_ERR_INVALID_PARAMETER;
 216             break;
 217         }
 218         switch (parameter) {
 219         case BT_HC_NOP:
 220             break;
 221         case BT_HC_HARD_RESET:
 222         case BT_HC_SOFT_RESET:
 223             bt_hid_reset(s);
 224             break;
 225         case BT_HC_SUSPEND:
 226             if (s->state == bt_state_ready)
 227                 s->state = bt_state_suspend;
 228             else
 229                 ret = BT_HS_ERR_INVALID_PARAMETER;
 230             break;
 231         case BT_HC_EXIT_SUSPEND:
 232             if (s->state == bt_state_suspend)
 233                 s->state = bt_state_ready;
 234             else
 235                 ret = BT_HS_ERR_INVALID_PARAMETER;
 236             break;
 237         case BT_HC_VIRTUAL_CABLE_UNPLUG:
 238             bt_hid_disconnect(s);
 239             break;
 240         default:
 241             ret = BT_HS_ERR_INVALID_PARAMETER;
 242         }
 243         break;
 244
 245     case BT_GET_REPORT:
 246         /* No ReportIDs declared.  */
 247         if (((parameter & 8) && len != 3) ||
 248                         (!(parameter & 8) && len != 1) ||
 249                         s->state != bt_state_ready) {
 250             ret = BT_HS_ERR_INVALID_PARAMETER;
 251             break;
 252         }
 253         if (parameter & 8)
 254             rlen = data[2] | (data[3] << 8);
 255         else
 256             rlen = INT_MAX;
 257         switch (parameter & 3) {
 258         case BT_DATA_OTHER:
 259             ret = BT_HS_ERR_INVALID_PARAMETER;
 260             break;
 261         case BT_DATA_INPUT:
 262             /* Here we can as well poll s->usbdev */
 263             bt_hid_send_data(s->control, BT_DATA_INPUT,
 264                             s->datain.buffer, MIN(rlen, s->datain.len));
 265             break;
 266         case BT_DATA_OUTPUT:
 267             bt_hid_send_data(s->control, BT_DATA_OUTPUT,
 268                             s->dataout.buffer, MIN(rlen, s->dataout.len));
 269             break;
 270         case BT_DATA_FEATURE:
 271             bt_hid_send_data(s->control, BT_DATA_FEATURE,
 272                             s->feature.buffer, MIN(rlen, s->feature.len));
 273             break;
 274         }
 275         break;
 276
 277     case BT_SET_REPORT:
 278         if (len < 2 || len > BT_HID_MTU || s->state != bt_state_ready ||
 279                         (parameter & 3) == BT_DATA_OTHER ||
 280                         (parameter & 3) == BT_DATA_INPUT) {
 281             ret = BT_HS_ERR_INVALID_PARAMETER;
 282             break;
 283         }
 284         s->data_type = parameter & 3;
 285         if (s->data_type == BT_DATA_OUTPUT) {
 286             s->dataout.len = len - 1;
 287             memcpy(s->dataout.buffer, data + 1, s->dataout.len);
 288         } else {
 289             s->feature.len = len - 1;
 290             memcpy(s->feature.buffer, data + 1, s->feature.len);
 291         }
 292         if (len == BT_HID_MTU)
 293             s->state = bt_state_transaction;
 294         else
 295             bt_hid_out(s);
 296         break;
 297
 298     case BT_GET_PROTOCOL:
 299         if (len != 1 || s->state == bt_state_transaction) {
 300             ret = BT_HS_ERR_INVALID_PARAMETER;
 301             break;
 302         }
 303         *s->control->sdu_out(s->control, 1) = s->proto;
 304         s->control->sdu_submit(s->control);
 305         break;
 306
 307     case BT_SET_PROTOCOL:
 308         if (len != 1 || s->state == bt_state_transaction ||
 309                         (parameter != BT_HID_PROTO_BOOT &&
 310                          parameter != BT_HID_PROTO_REPORT)) {
 311             ret = BT_HS_ERR_INVALID_PARAMETER;
 312             break;
 313         }
 314         s->proto = parameter;
 315         s->hid.protocol = parameter;
 316         ret = BT_HS_SUCCESSFUL;
 317         break;
 318
 319     case BT_GET_IDLE:
 320         if (len != 1 || s->state == bt_state_transaction) {
 321             ret = BT_HS_ERR_INVALID_PARAMETER;
 322             break;
 323         }
 324         *s->control->sdu_out(s->control, 1) = s->hid.idle;
 325         s->control->sdu_submit(s->control);
 326         break;
 327
 328     case BT_SET_IDLE:
 329         if (len != 2 || s->state == bt_state_transaction) {
 330             ret = BT_HS_ERR_INVALID_PARAMETER;
 331             break;
 332         }
 333
 334         s->hid.idle = data[1];
 335         /* XXX: Does this generate a handshake? */
 336         break;
 337
 338     case BT_DATC:
 339         if (len > BT_HID_MTU || s->state != bt_state_transaction) {
 340             ret = BT_HS_ERR_INVALID_PARAMETER;
 341             break;
 342         }
 343         if (s->data_type == BT_DATA_OUTPUT) {
 344             memcpy(s->dataout.buffer + s->dataout.len, data + 1, len - 1);
 345             s->dataout.len += len - 1;
 346         } else {
 347             memcpy(s->feature.buffer + s->feature.len, data + 1, len - 1);
 348             s->feature.len += len - 1;
 349         }
 350         if (len < BT_HID_MTU) {
 351             bt_hid_out(s);
 352             s->state = bt_state_ready;
 353         }
 354         break;
 355
 356     default:
 357         ret = BT_HS_ERR_UNSUPPORTED_REQUEST;
 358     }
 359
 360     if (ret != -1)
 361         bt_hid_send_handshake(s, ret);
 362 }
 363
 364 static void bt_hid_control_sdu(void *opaque, const uint8_t *data, int len)
 365 {
 366     struct bt_hid_device_s *hid = opaque;
 367
 368     bt_hid_control_transaction(hid, data, len);
 369 }
 370
 371 static void bt_hid_datain(HIDState *hs)
 372 {
 373     struct bt_hid_device_s *hid =
 374         container_of(hs, struct bt_hid_device_s, hid);
 375
 376     /* If suspended, wake-up and send a wake-up event first.  We might
 377      * want to also inspect the input report and ignore event like
 378      * mouse movements until a button event occurs.  */
 379     if (hid->state == bt_state_suspend) {
 380         hid->state = bt_state_ready;
 381     }
 382
 383     if (bt_hid_in(hid) > 0)
 384         /* TODO: when in boot-mode precede any Input reports with the ReportID
 385          * byte, here and in GetReport/SetReport on the Control channel.  */
 386         bt_hid_send_data(hid->interrupt, BT_DATA_INPUT,
 387                         hid->datain.buffer, hid->datain.len);
 388 }
 389
 390 static void bt_hid_interrupt_sdu(void *opaque, const uint8_t *data, int len)
 391 {
 392     struct bt_hid_device_s *hid = opaque;
 393
 394     if (len > BT_HID_MTU || len < 1)
 395         goto bad;
 396     if ((data[0] & 3) != BT_DATA_OUTPUT)
 397         goto bad;
 398     if ((data[0] >> 4) == BT_DATA) {
 399         if (hid->intr_state)
 400             goto bad;
 401
 402         hid->data_type = BT_DATA_OUTPUT;
 403         hid->intrdataout.len = 0;
 404     } else if ((data[0] >> 4) == BT_DATC) {
 405         if (!hid->intr_state)
 406             goto bad;
 407     } else
 408         goto bad;
 409
 410     memcpy(hid->intrdataout.buffer + hid->intrdataout.len, data + 1, len - 1);
 411     hid->intrdataout.len += len - 1;
 412     hid->intr_state = (len == BT_HID_MTU);
 413     if (!hid->intr_state) {
 414         memcpy(hid->dataout.buffer, hid->intrdataout.buffer,
 415                         hid->dataout.len = hid->intrdataout.len);
 416         bt_hid_out(hid);
 417     }
 418
 419     return;
 420 bad:
 421     fprintf(stderr, "%s: bad transaction on Interrupt channel.\n",
 422                     __FUNCTION__);
 423 }
 424
 425 /* "Virtual cable" plug/unplug event.  */
 426 static void bt_hid_connected_update(struct bt_hid_device_s *hid)
 427 {
 428     int prev = hid->connected;
 429
 430     hid->connected = hid->control && hid->interrupt;
 431
 432     /* Stop page-/inquiry-scanning when a host is connected.  */
 433     hid->btdev.device.page_scan = !hid->connected;
 434     hid->btdev.device.inquiry_scan = !hid->connected;
 435
 436     if (hid->connected && !prev) {
 437         hid_reset(&hid->hid);
 438         hid->proto = BT_HID_PROTO_REPORT;
 439     }
 440
 441     /* Should set HIDVirtualCable in SDP (possibly need to check that SDP
 442      * isn't destroyed yet, in case we're being called from handle_destroy) */
 443 }
 444
 445 static void bt_hid_close_control(void *opaque)
 446 {
 447     struct bt_hid_device_s *hid = opaque;
 448
 449     hid->control = NULL;
 450     bt_hid_connected_update(hid);
 451 }
 452
 453 static void bt_hid_close_interrupt(void *opaque)
 454 {
 455     struct bt_hid_device_s *hid = opaque;
 456
 457     hid->interrupt = NULL;
 458     bt_hid_connected_update(hid);
 459 }
 460
 461 static int bt_hid_new_control_ch(struct bt_l2cap_device_s *dev,
 462                 struct bt_l2cap_conn_params_s *params)
 463 {
 464     struct bt_hid_device_s *hid = (struct bt_hid_device_s *) dev;
 465
 466     if (hid->control)
 467         return 1;
 468
 469     hid->control = params;
 470     hid->control->opaque = hid;
 471     hid->control->close = bt_hid_close_control;
 472     hid->control->sdu_in = bt_hid_control_sdu;
 473
 474     bt_hid_connected_update(hid);
 475
 476     return 0;
 477 }
 478
 479 static int bt_hid_new_interrupt_ch(struct bt_l2cap_device_s *dev,
 480                 struct bt_l2cap_conn_params_s *params)
 481 {
 482     struct bt_hid_device_s *hid = (struct bt_hid_device_s *) dev;
 483
 484     if (hid->interrupt)
 485         return 1;
 486
 487     hid->interrupt = params;
 488     hid->interrupt->opaque = hid;
 489     hid->interrupt->close = bt_hid_close_interrupt;
 490     hid->interrupt->sdu_in = bt_hid_interrupt_sdu;
 491
 492     bt_hid_connected_update(hid);
 493
 494     return 0;
 495 }
 496
 497 static void bt_hid_destroy(struct bt_device_s *dev)
 498 {
 499     struct bt_hid_device_s *hid = (struct bt_hid_device_s *) dev;
 500
 501     if (hid->connected)
 502         bt_hid_send_control(hid, BT_HC_VIRTUAL_CABLE_UNPLUG);
 503     bt_l2cap_device_done(&hid->btdev);
 504
 505     hid_free(&hid->hid);
 506
 507     g_free(hid);
 508 }
 509
 510 enum peripheral_minor_class {
 511     class_other         = 0 << 4,
 512     class_keyboard      = 1 << 4,
 513     class_pointing      = 2 << 4,
 514     class_combo         = 3 << 4,
 515 };
 516
 517 static struct bt_device_s *bt_hid_init(struct bt_scatternet_s *net,
 518                                        enum peripheral_minor_class minor)
 519 {
 520     struct bt_hid_device_s *s = g_malloc0(sizeof(*s));
 521     uint32_t class =
 522             /* Format type */
 523             (0 << 0) |
 524             /* Device class */
 525             (minor << 2) |
 526             (5 << 8) |  /* "Peripheral" */
 527             /* Service classes */
 528             (1 << 13) | /* Limited discoverable mode */
 529             (1 << 19);  /* Capturing device (?) */
 530
 531     bt_l2cap_device_init(&s->btdev, net);
 532     bt_l2cap_sdp_init(&s->btdev);
 533     bt_l2cap_psm_register(&s->btdev, BT_PSM_HID_CTRL,
 534                     BT_HID_MTU, bt_hid_new_control_ch);
 535     bt_l2cap_psm_register(&s->btdev, BT_PSM_HID_INTR,
 536                     BT_HID_MTU, bt_hid_new_interrupt_ch);
 537
 538     hid_init(&s->hid, HID_KEYBOARD, bt_hid_datain);
 539     s->btdev.device.lmp_name = "BT Keyboard";
 540
 541     s->btdev.device.handle_destroy = bt_hid_destroy;
 542
 543     s->btdev.device.class[0] = (class >>  0) & 0xff;
 544     s->btdev.device.class[1] = (class >>  8) & 0xff;
 545     s->btdev.device.class[2] = (class >> 16) & 0xff;
 546
 547     return &s->btdev.device;
 548 }
 549
 550 struct bt_device_s *bt_keyboard_init(struct bt_scatternet_s *net)
 551 {
 552     return bt_hid_init(net, class_keyboard);
 553 }