stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY
[qemu/agraf.git] / hw / smc91c111.c
blobc2feae6eb8e905690d118e17a5a3ad0afb355591
1 /*
2 * SMSC 91C111 Ethernet interface emulation
4 * Copyright (c) 2005 CodeSourcery, LLC.
5 * Written by Paul Brook
7 * This code is licensed under the GPL
8 */
10 #include "hw/sysbus.h"
11 #include "net/net.h"
12 #include "hw/devices.h"
13 /* For crc32 */
14 #include <zlib.h>
16 /* Number of 2k memory pages available. */
17 #define NUM_PACKETS 4
19 typedef struct {
20 SysBusDevice busdev;
21 NICState *nic;
22 NICConf conf;
23 uint16_t tcr;
24 uint16_t rcr;
25 uint16_t cr;
26 uint16_t ctr;
27 uint16_t gpr;
28 uint16_t ptr;
29 uint16_t ercv;
30 qemu_irq irq;
31 int bank;
32 int packet_num;
33 int tx_alloc;
34 /* Bitmask of allocated packets. */
35 int allocated;
36 int tx_fifo_len;
37 int tx_fifo[NUM_PACKETS];
38 int rx_fifo_len;
39 int rx_fifo[NUM_PACKETS];
40 int tx_fifo_done_len;
41 int tx_fifo_done[NUM_PACKETS];
42 /* Packet buffer memory. */
43 uint8_t data[NUM_PACKETS][2048];
44 uint8_t int_level;
45 uint8_t int_mask;
46 MemoryRegion mmio;
47 } smc91c111_state;
49 static const VMStateDescription vmstate_smc91c111 = {
50 .name = "smc91c111",
51 .version_id = 1,
52 .minimum_version_id = 1,
53 .fields = (VMStateField []) {
54 VMSTATE_UINT16(tcr, smc91c111_state),
55 VMSTATE_UINT16(rcr, smc91c111_state),
56 VMSTATE_UINT16(cr, smc91c111_state),
57 VMSTATE_UINT16(ctr, smc91c111_state),
58 VMSTATE_UINT16(gpr, smc91c111_state),
59 VMSTATE_UINT16(ptr, smc91c111_state),
60 VMSTATE_UINT16(ercv, smc91c111_state),
61 VMSTATE_INT32(bank, smc91c111_state),
62 VMSTATE_INT32(packet_num, smc91c111_state),
63 VMSTATE_INT32(tx_alloc, smc91c111_state),
64 VMSTATE_INT32(allocated, smc91c111_state),
65 VMSTATE_INT32(tx_fifo_len, smc91c111_state),
66 VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS),
67 VMSTATE_INT32(rx_fifo_len, smc91c111_state),
68 VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS),
69 VMSTATE_INT32(tx_fifo_done_len, smc91c111_state),
70 VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS),
71 VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048),
72 VMSTATE_UINT8(int_level, smc91c111_state),
73 VMSTATE_UINT8(int_mask, smc91c111_state),
74 VMSTATE_END_OF_LIST()
78 #define RCR_SOFT_RST 0x8000
79 #define RCR_STRIP_CRC 0x0200
80 #define RCR_RXEN 0x0100
82 #define TCR_EPH_LOOP 0x2000
83 #define TCR_NOCRC 0x0100
84 #define TCR_PAD_EN 0x0080
85 #define TCR_FORCOL 0x0004
86 #define TCR_LOOP 0x0002
87 #define TCR_TXEN 0x0001
89 #define INT_MD 0x80
90 #define INT_ERCV 0x40
91 #define INT_EPH 0x20
92 #define INT_RX_OVRN 0x10
93 #define INT_ALLOC 0x08
94 #define INT_TX_EMPTY 0x04
95 #define INT_TX 0x02
96 #define INT_RCV 0x01
98 #define CTR_AUTO_RELEASE 0x0800
99 #define CTR_RELOAD 0x0002
100 #define CTR_STORE 0x0001
102 #define RS_ALGNERR 0x8000
103 #define RS_BRODCAST 0x4000
104 #define RS_BADCRC 0x2000
105 #define RS_ODDFRAME 0x1000
106 #define RS_TOOLONG 0x0800
107 #define RS_TOOSHORT 0x0400
108 #define RS_MULTICAST 0x0001
110 /* Update interrupt status. */
111 static void smc91c111_update(smc91c111_state *s)
113 int level;
115 if (s->tx_fifo_len == 0)
116 s->int_level |= INT_TX_EMPTY;
117 if (s->tx_fifo_done_len != 0)
118 s->int_level |= INT_TX;
119 level = (s->int_level & s->int_mask) != 0;
120 qemu_set_irq(s->irq, level);
123 /* Try to allocate a packet. Returns 0x80 on failure. */
124 static int smc91c111_allocate_packet(smc91c111_state *s)
126 int i;
127 if (s->allocated == (1 << NUM_PACKETS) - 1) {
128 return 0x80;
131 for (i = 0; i < NUM_PACKETS; i++) {
132 if ((s->allocated & (1 << i)) == 0)
133 break;
135 s->allocated |= 1 << i;
136 return i;
140 /* Process a pending TX allocate. */
141 static void smc91c111_tx_alloc(smc91c111_state *s)
143 s->tx_alloc = smc91c111_allocate_packet(s);
144 if (s->tx_alloc == 0x80)
145 return;
146 s->int_level |= INT_ALLOC;
147 smc91c111_update(s);
150 /* Remove and item from the RX FIFO. */
151 static void smc91c111_pop_rx_fifo(smc91c111_state *s)
153 int i;
155 s->rx_fifo_len--;
156 if (s->rx_fifo_len) {
157 for (i = 0; i < s->rx_fifo_len; i++)
158 s->rx_fifo[i] = s->rx_fifo[i + 1];
159 s->int_level |= INT_RCV;
160 } else {
161 s->int_level &= ~INT_RCV;
163 smc91c111_update(s);
166 /* Remove an item from the TX completion FIFO. */
167 static void smc91c111_pop_tx_fifo_done(smc91c111_state *s)
169 int i;
171 if (s->tx_fifo_done_len == 0)
172 return;
173 s->tx_fifo_done_len--;
174 for (i = 0; i < s->tx_fifo_done_len; i++)
175 s->tx_fifo_done[i] = s->tx_fifo_done[i + 1];
178 /* Release the memory allocated to a packet. */
179 static void smc91c111_release_packet(smc91c111_state *s, int packet)
181 s->allocated &= ~(1 << packet);
182 if (s->tx_alloc == 0x80)
183 smc91c111_tx_alloc(s);
186 /* Flush the TX FIFO. */
187 static void smc91c111_do_tx(smc91c111_state *s)
189 int i;
190 int len;
191 int control;
192 int packetnum;
193 uint8_t *p;
195 if ((s->tcr & TCR_TXEN) == 0)
196 return;
197 if (s->tx_fifo_len == 0)
198 return;
199 for (i = 0; i < s->tx_fifo_len; i++) {
200 packetnum = s->tx_fifo[i];
201 p = &s->data[packetnum][0];
202 /* Set status word. */
203 *(p++) = 0x01;
204 *(p++) = 0x40;
205 len = *(p++);
206 len |= ((int)*(p++)) << 8;
207 len -= 6;
208 control = p[len + 1];
209 if (control & 0x20)
210 len++;
211 /* ??? This overwrites the data following the buffer.
212 Don't know what real hardware does. */
213 if (len < 64 && (s->tcr & TCR_PAD_EN)) {
214 memset(p + len, 0, 64 - len);
215 len = 64;
217 #if 0
219 int add_crc;
221 /* The card is supposed to append the CRC to the frame.
222 However none of the other network traffic has the CRC
223 appended. Suspect this is low level ethernet detail we
224 don't need to worry about. */
225 add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0;
226 if (add_crc) {
227 uint32_t crc;
229 crc = crc32(~0, p, len);
230 memcpy(p + len, &crc, 4);
231 len += 4;
234 #endif
235 if (s->ctr & CTR_AUTO_RELEASE)
236 /* Race? */
237 smc91c111_release_packet(s, packetnum);
238 else if (s->tx_fifo_done_len < NUM_PACKETS)
239 s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum;
240 qemu_send_packet(qemu_get_queue(s->nic), p, len);
242 s->tx_fifo_len = 0;
243 smc91c111_update(s);
246 /* Add a packet to the TX FIFO. */
247 static void smc91c111_queue_tx(smc91c111_state *s, int packet)
249 if (s->tx_fifo_len == NUM_PACKETS)
250 return;
251 s->tx_fifo[s->tx_fifo_len++] = packet;
252 smc91c111_do_tx(s);
255 static void smc91c111_reset(DeviceState *dev)
257 smc91c111_state *s = FROM_SYSBUS(smc91c111_state, SYS_BUS_DEVICE(dev));
258 s->bank = 0;
259 s->tx_fifo_len = 0;
260 s->tx_fifo_done_len = 0;
261 s->rx_fifo_len = 0;
262 s->allocated = 0;
263 s->packet_num = 0;
264 s->tx_alloc = 0;
265 s->tcr = 0;
266 s->rcr = 0;
267 s->cr = 0xa0b1;
268 s->ctr = 0x1210;
269 s->ptr = 0;
270 s->ercv = 0x1f;
271 s->int_level = INT_TX_EMPTY;
272 s->int_mask = 0;
273 smc91c111_update(s);
276 #define SET_LOW(name, val) s->name = (s->name & 0xff00) | val
277 #define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8)
279 static void smc91c111_writeb(void *opaque, hwaddr offset,
280 uint32_t value)
282 smc91c111_state *s = (smc91c111_state *)opaque;
284 offset = offset & 0xf;
285 if (offset == 14) {
286 s->bank = value;
287 return;
289 if (offset == 15)
290 return;
291 switch (s->bank) {
292 case 0:
293 switch (offset) {
294 case 0: /* TCR */
295 SET_LOW(tcr, value);
296 return;
297 case 1:
298 SET_HIGH(tcr, value);
299 return;
300 case 4: /* RCR */
301 SET_LOW(rcr, value);
302 return;
303 case 5:
304 SET_HIGH(rcr, value);
305 if (s->rcr & RCR_SOFT_RST)
306 smc91c111_reset(&s->busdev.qdev);
307 return;
308 case 10: case 11: /* RPCR */
309 /* Ignored */
310 return;
311 case 12: case 13: /* Reserved */
312 return;
314 break;
316 case 1:
317 switch (offset) {
318 case 0: /* CONFIG */
319 SET_LOW(cr, value);
320 return;
321 case 1:
322 SET_HIGH(cr,value);
323 return;
324 case 2: case 3: /* BASE */
325 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
326 /* Not implemented. */
327 return;
328 case 10: /* Genral Purpose */
329 SET_LOW(gpr, value);
330 return;
331 case 11:
332 SET_HIGH(gpr, value);
333 return;
334 case 12: /* Control */
335 if (value & 1)
336 fprintf(stderr, "smc91c111:EEPROM store not implemented\n");
337 if (value & 2)
338 fprintf(stderr, "smc91c111:EEPROM reload not implemented\n");
339 value &= ~3;
340 SET_LOW(ctr, value);
341 return;
342 case 13:
343 SET_HIGH(ctr, value);
344 return;
346 break;
348 case 2:
349 switch (offset) {
350 case 0: /* MMU Command */
351 switch (value >> 5) {
352 case 0: /* no-op */
353 break;
354 case 1: /* Allocate for TX. */
355 s->tx_alloc = 0x80;
356 s->int_level &= ~INT_ALLOC;
357 smc91c111_update(s);
358 smc91c111_tx_alloc(s);
359 break;
360 case 2: /* Reset MMU. */
361 s->allocated = 0;
362 s->tx_fifo_len = 0;
363 s->tx_fifo_done_len = 0;
364 s->rx_fifo_len = 0;
365 s->tx_alloc = 0;
366 break;
367 case 3: /* Remove from RX FIFO. */
368 smc91c111_pop_rx_fifo(s);
369 break;
370 case 4: /* Remove from RX FIFO and release. */
371 if (s->rx_fifo_len > 0) {
372 smc91c111_release_packet(s, s->rx_fifo[0]);
374 smc91c111_pop_rx_fifo(s);
375 break;
376 case 5: /* Release. */
377 smc91c111_release_packet(s, s->packet_num);
378 break;
379 case 6: /* Add to TX FIFO. */
380 smc91c111_queue_tx(s, s->packet_num);
381 break;
382 case 7: /* Reset TX FIFO. */
383 s->tx_fifo_len = 0;
384 s->tx_fifo_done_len = 0;
385 break;
387 return;
388 case 1:
389 /* Ignore. */
390 return;
391 case 2: /* Packet Number Register */
392 s->packet_num = value;
393 return;
394 case 3: case 4: case 5:
395 /* Should be readonly, but linux writes to them anyway. Ignore. */
396 return;
397 case 6: /* Pointer */
398 SET_LOW(ptr, value);
399 return;
400 case 7:
401 SET_HIGH(ptr, value);
402 return;
403 case 8: case 9: case 10: case 11: /* Data */
405 int p;
406 int n;
408 if (s->ptr & 0x8000)
409 n = s->rx_fifo[0];
410 else
411 n = s->packet_num;
412 p = s->ptr & 0x07ff;
413 if (s->ptr & 0x4000) {
414 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff);
415 } else {
416 p += (offset & 3);
418 s->data[n][p] = value;
420 return;
421 case 12: /* Interrupt ACK. */
422 s->int_level &= ~(value & 0xd6);
423 if (value & INT_TX)
424 smc91c111_pop_tx_fifo_done(s);
425 smc91c111_update(s);
426 return;
427 case 13: /* Interrupt mask. */
428 s->int_mask = value;
429 smc91c111_update(s);
430 return;
432 break;
434 case 3:
435 switch (offset) {
436 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
437 /* Multicast table. */
438 /* Not implemented. */
439 return;
440 case 8: case 9: /* Management Interface. */
441 /* Not implemented. */
442 return;
443 case 12: /* Early receive. */
444 s->ercv = value & 0x1f;
445 return;
446 case 13:
447 /* Ignore. */
448 return;
450 break;
452 hw_error("smc91c111_write: Bad reg %d:%x\n", s->bank, (int)offset);
455 static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
457 smc91c111_state *s = (smc91c111_state *)opaque;
459 offset = offset & 0xf;
460 if (offset == 14) {
461 return s->bank;
463 if (offset == 15)
464 return 0x33;
465 switch (s->bank) {
466 case 0:
467 switch (offset) {
468 case 0: /* TCR */
469 return s->tcr & 0xff;
470 case 1:
471 return s->tcr >> 8;
472 case 2: /* EPH Status */
473 return 0;
474 case 3:
475 return 0x40;
476 case 4: /* RCR */
477 return s->rcr & 0xff;
478 case 5:
479 return s->rcr >> 8;
480 case 6: /* Counter */
481 case 7:
482 /* Not implemented. */
483 return 0;
484 case 8: /* Memory size. */
485 return NUM_PACKETS;
486 case 9: /* Free memory available. */
488 int i;
489 int n;
490 n = 0;
491 for (i = 0; i < NUM_PACKETS; i++) {
492 if (s->allocated & (1 << i))
493 n++;
495 return n;
497 case 10: case 11: /* RPCR */
498 /* Not implemented. */
499 return 0;
500 case 12: case 13: /* Reserved */
501 return 0;
503 break;
505 case 1:
506 switch (offset) {
507 case 0: /* CONFIG */
508 return s->cr & 0xff;
509 case 1:
510 return s->cr >> 8;
511 case 2: case 3: /* BASE */
512 /* Not implemented. */
513 return 0;
514 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
515 return s->conf.macaddr.a[offset - 4];
516 case 10: /* General Purpose */
517 return s->gpr & 0xff;
518 case 11:
519 return s->gpr >> 8;
520 case 12: /* Control */
521 return s->ctr & 0xff;
522 case 13:
523 return s->ctr >> 8;
525 break;
527 case 2:
528 switch (offset) {
529 case 0: case 1: /* MMUCR Busy bit. */
530 return 0;
531 case 2: /* Packet Number. */
532 return s->packet_num;
533 case 3: /* Allocation Result. */
534 return s->tx_alloc;
535 case 4: /* TX FIFO */
536 if (s->tx_fifo_done_len == 0)
537 return 0x80;
538 else
539 return s->tx_fifo_done[0];
540 case 5: /* RX FIFO */
541 if (s->rx_fifo_len == 0)
542 return 0x80;
543 else
544 return s->rx_fifo[0];
545 case 6: /* Pointer */
546 return s->ptr & 0xff;
547 case 7:
548 return (s->ptr >> 8) & 0xf7;
549 case 8: case 9: case 10: case 11: /* Data */
551 int p;
552 int n;
554 if (s->ptr & 0x8000)
555 n = s->rx_fifo[0];
556 else
557 n = s->packet_num;
558 p = s->ptr & 0x07ff;
559 if (s->ptr & 0x4000) {
560 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff);
561 } else {
562 p += (offset & 3);
564 return s->data[n][p];
566 case 12: /* Interrupt status. */
567 return s->int_level;
568 case 13: /* Interrupt mask. */
569 return s->int_mask;
571 break;
573 case 3:
574 switch (offset) {
575 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
576 /* Multicast table. */
577 /* Not implemented. */
578 return 0;
579 case 8: /* Management Interface. */
580 /* Not implemented. */
581 return 0x30;
582 case 9:
583 return 0x33;
584 case 10: /* Revision. */
585 return 0x91;
586 case 11:
587 return 0x33;
588 case 12:
589 return s->ercv;
590 case 13:
591 return 0;
593 break;
595 hw_error("smc91c111_read: Bad reg %d:%x\n", s->bank, (int)offset);
596 return 0;
599 static void smc91c111_writew(void *opaque, hwaddr offset,
600 uint32_t value)
602 smc91c111_writeb(opaque, offset, value & 0xff);
603 smc91c111_writeb(opaque, offset + 1, value >> 8);
606 static void smc91c111_writel(void *opaque, hwaddr offset,
607 uint32_t value)
609 /* 32-bit writes to offset 0xc only actually write to the bank select
610 register (offset 0xe) */
611 if (offset != 0xc)
612 smc91c111_writew(opaque, offset, value & 0xffff);
613 smc91c111_writew(opaque, offset + 2, value >> 16);
616 static uint32_t smc91c111_readw(void *opaque, hwaddr offset)
618 uint32_t val;
619 val = smc91c111_readb(opaque, offset);
620 val |= smc91c111_readb(opaque, offset + 1) << 8;
621 return val;
624 static uint32_t smc91c111_readl(void *opaque, hwaddr offset)
626 uint32_t val;
627 val = smc91c111_readw(opaque, offset);
628 val |= smc91c111_readw(opaque, offset + 2) << 16;
629 return val;
632 static int smc91c111_can_receive(NetClientState *nc)
634 smc91c111_state *s = qemu_get_nic_opaque(nc);
636 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
637 return 1;
638 if (s->allocated == (1 << NUM_PACKETS) - 1)
639 return 0;
640 return 1;
643 static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size)
645 smc91c111_state *s = qemu_get_nic_opaque(nc);
646 int status;
647 int packetsize;
648 uint32_t crc;
649 int packetnum;
650 uint8_t *p;
652 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
653 return -1;
654 /* Short packets are padded with zeros. Receiving a packet
655 < 64 bytes long is considered an error condition. */
656 if (size < 64)
657 packetsize = 64;
658 else
659 packetsize = (size & ~1);
660 packetsize += 6;
661 crc = (s->rcr & RCR_STRIP_CRC) == 0;
662 if (crc)
663 packetsize += 4;
664 /* TODO: Flag overrun and receive errors. */
665 if (packetsize > 2048)
666 return -1;
667 packetnum = smc91c111_allocate_packet(s);
668 if (packetnum == 0x80)
669 return -1;
670 s->rx_fifo[s->rx_fifo_len++] = packetnum;
672 p = &s->data[packetnum][0];
673 /* ??? Multicast packets? */
674 status = 0;
675 if (size > 1518)
676 status |= RS_TOOLONG;
677 if (size & 1)
678 status |= RS_ODDFRAME;
679 *(p++) = status & 0xff;
680 *(p++) = status >> 8;
681 *(p++) = packetsize & 0xff;
682 *(p++) = packetsize >> 8;
683 memcpy(p, buf, size & ~1);
684 p += (size & ~1);
685 /* Pad short packets. */
686 if (size < 64) {
687 int pad;
689 if (size & 1)
690 *(p++) = buf[size - 1];
691 pad = 64 - size;
692 memset(p, 0, pad);
693 p += pad;
694 size = 64;
696 /* It's not clear if the CRC should go before or after the last byte in
697 odd sized packets. Linux disables the CRC, so that's no help.
698 The pictures in the documentation show the CRC aligned on a 16-bit
699 boundary before the last odd byte, so that's what we do. */
700 if (crc) {
701 crc = crc32(~0, buf, size);
702 *(p++) = crc & 0xff; crc >>= 8;
703 *(p++) = crc & 0xff; crc >>= 8;
704 *(p++) = crc & 0xff; crc >>= 8;
705 *(p++) = crc & 0xff;
707 if (size & 1) {
708 *(p++) = buf[size - 1];
709 *p = 0x60;
710 } else {
711 *(p++) = 0;
712 *p = 0x40;
714 /* TODO: Raise early RX interrupt? */
715 s->int_level |= INT_RCV;
716 smc91c111_update(s);
718 return size;
721 static const MemoryRegionOps smc91c111_mem_ops = {
722 /* The special case for 32 bit writes to 0xc means we can't just
723 * set .impl.min/max_access_size to 1, unfortunately
725 .old_mmio = {
726 .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, },
727 .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, },
729 .endianness = DEVICE_NATIVE_ENDIAN,
732 static void smc91c111_cleanup(NetClientState *nc)
734 smc91c111_state *s = qemu_get_nic_opaque(nc);
736 s->nic = NULL;
739 static NetClientInfo net_smc91c111_info = {
740 .type = NET_CLIENT_OPTIONS_KIND_NIC,
741 .size = sizeof(NICState),
742 .can_receive = smc91c111_can_receive,
743 .receive = smc91c111_receive,
744 .cleanup = smc91c111_cleanup,
747 static int smc91c111_init1(SysBusDevice *dev)
749 smc91c111_state *s = FROM_SYSBUS(smc91c111_state, dev);
750 memory_region_init_io(&s->mmio, &smc91c111_mem_ops, s,
751 "smc91c111-mmio", 16);
752 sysbus_init_mmio(dev, &s->mmio);
753 sysbus_init_irq(dev, &s->irq);
754 qemu_macaddr_default_if_unset(&s->conf.macaddr);
755 s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf,
756 object_get_typename(OBJECT(dev)), dev->qdev.id, s);
757 qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
758 /* ??? Save/restore. */
759 return 0;
762 static Property smc91c111_properties[] = {
763 DEFINE_NIC_PROPERTIES(smc91c111_state, conf),
764 DEFINE_PROP_END_OF_LIST(),
767 static void smc91c111_class_init(ObjectClass *klass, void *data)
769 DeviceClass *dc = DEVICE_CLASS(klass);
770 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
772 k->init = smc91c111_init1;
773 dc->reset = smc91c111_reset;
774 dc->vmsd = &vmstate_smc91c111;
775 dc->props = smc91c111_properties;
778 static const TypeInfo smc91c111_info = {
779 .name = "smc91c111",
780 .parent = TYPE_SYS_BUS_DEVICE,
781 .instance_size = sizeof(smc91c111_state),
782 .class_init = smc91c111_class_init,
785 static void smc91c111_register_types(void)
787 type_register_static(&smc91c111_info);
790 /* Legacy helper function. Should go away when machine config files are
791 implemented. */
792 void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
794 DeviceState *dev;
795 SysBusDevice *s;
797 qemu_check_nic_model(nd, "smc91c111");
798 dev = qdev_create(NULL, "smc91c111");
799 qdev_set_nic_properties(dev, nd);
800 qdev_init_nofail(dev);
801 s = SYS_BUS_DEVICE(dev);
802 sysbus_mmio_map(s, 0, base);
803 sysbus_connect_irq(s, 0, irq);
806 type_init(smc91c111_register_types)