tests: Add gcov support for sparc64 qtest
[qemu/agraf.git] / hw / puv3_ost.c
blob14c6f21a756fd11fc6d60918234a354c46707a45
1 /*
2 * OSTimer device simulation in PKUnity SoC
4 * Copyright (C) 2010-2012 Guan Xuetao
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation, or any later version.
9 * See the COPYING file in the top-level directory.
11 #include "sysbus.h"
12 #include "ptimer.h"
14 #undef DEBUG_PUV3
15 #include "puv3.h"
17 /* puv3 ostimer implementation. */
18 typedef struct {
19 SysBusDevice busdev;
20 MemoryRegion iomem;
21 QEMUBH *bh;
22 qemu_irq irq;
23 ptimer_state *ptimer;
25 uint32_t reg_OSMR0;
26 uint32_t reg_OSCR;
27 uint32_t reg_OSSR;
28 uint32_t reg_OIER;
29 } PUV3OSTState;
31 static uint64_t puv3_ost_read(void *opaque, hwaddr offset,
32 unsigned size)
34 PUV3OSTState *s = opaque;
35 uint32_t ret = 0;
37 switch (offset) {
38 case 0x10: /* Counter Register */
39 ret = s->reg_OSMR0 - (uint32_t)ptimer_get_count(s->ptimer);
40 break;
41 case 0x14: /* Status Register */
42 ret = s->reg_OSSR;
43 break;
44 case 0x1c: /* Interrupt Enable Register */
45 ret = s->reg_OIER;
46 break;
47 default:
48 DPRINTF("Bad offset %x\n", (int)offset);
50 DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
51 return ret;
54 static void puv3_ost_write(void *opaque, hwaddr offset,
55 uint64_t value, unsigned size)
57 PUV3OSTState *s = opaque;
59 DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
60 switch (offset) {
61 case 0x00: /* Match Register 0 */
62 s->reg_OSMR0 = value;
63 if (s->reg_OSMR0 > s->reg_OSCR) {
64 ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR);
65 } else {
66 ptimer_set_count(s->ptimer, s->reg_OSMR0 +
67 (0xffffffff - s->reg_OSCR));
69 ptimer_run(s->ptimer, 2);
70 break;
71 case 0x14: /* Status Register */
72 assert(value == 0);
73 if (s->reg_OSSR) {
74 s->reg_OSSR = value;
75 qemu_irq_lower(s->irq);
77 break;
78 case 0x1c: /* Interrupt Enable Register */
79 s->reg_OIER = value;
80 break;
81 default:
82 DPRINTF("Bad offset %x\n", (int)offset);
86 static const MemoryRegionOps puv3_ost_ops = {
87 .read = puv3_ost_read,
88 .write = puv3_ost_write,
89 .impl = {
90 .min_access_size = 4,
91 .max_access_size = 4,
93 .endianness = DEVICE_NATIVE_ENDIAN,
96 static void puv3_ost_tick(void *opaque)
98 PUV3OSTState *s = opaque;
100 DPRINTF("ost hit when ptimer counter from 0x%x to 0x%x!\n",
101 s->reg_OSCR, s->reg_OSMR0);
103 s->reg_OSCR = s->reg_OSMR0;
104 if (s->reg_OIER) {
105 s->reg_OSSR = 1;
106 qemu_irq_raise(s->irq);
110 static int puv3_ost_init(SysBusDevice *dev)
112 PUV3OSTState *s = FROM_SYSBUS(PUV3OSTState, dev);
114 s->reg_OIER = 0;
115 s->reg_OSSR = 0;
116 s->reg_OSMR0 = 0;
117 s->reg_OSCR = 0;
119 sysbus_init_irq(dev, &s->irq);
121 s->bh = qemu_bh_new(puv3_ost_tick, s);
122 s->ptimer = ptimer_init(s->bh);
123 ptimer_set_freq(s->ptimer, 50 * 1000 * 1000);
125 memory_region_init_io(&s->iomem, &puv3_ost_ops, s, "puv3_ost",
126 PUV3_REGS_OFFSET);
127 sysbus_init_mmio(dev, &s->iomem);
129 return 0;
132 static void puv3_ost_class_init(ObjectClass *klass, void *data)
134 SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
136 sdc->init = puv3_ost_init;
139 static const TypeInfo puv3_ost_info = {
140 .name = "puv3_ost",
141 .parent = TYPE_SYS_BUS_DEVICE,
142 .instance_size = sizeof(PUV3OSTState),
143 .class_init = puv3_ost_class_init,
146 static void puv3_ost_register_type(void)
148 type_register_static(&puv3_ost_info);
151 type_init(puv3_ost_register_type)