eepro100: Fix compiler errors from debug messages
[qemu/agraf.git] / hw / tsc2005.c
blobb75cc862ae5b4b6c46400ca9ca9b7b2f327cca08
1 /*
2 * TI TSC2005 emulator.
4 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org>
5 * Copyright (C) 2008 Nokia Corporation
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
21 #include "hw.h"
22 #include "qemu-timer.h"
23 #include "console.h"
24 #include "devices.h"
26 #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - (p ? 12 : 10)))
28 typedef struct {
29 qemu_irq pint; /* Combination of the nPENIRQ and DAV signals */
30 QEMUTimer *timer;
31 uint16_t model;
33 int x, y;
34 int pressure;
36 int state, reg, irq, command;
37 uint16_t data, dav;
39 int busy;
40 int enabled;
41 int host_mode;
42 int function;
43 int nextfunction;
44 int precision;
45 int nextprecision;
46 int filter;
47 int pin_func;
48 int timing[2];
49 int noise;
50 int reset;
51 int pdst;
52 int pnd0;
53 uint16_t temp_thr[2];
54 uint16_t aux_thr[2];
56 int tr[8];
57 } TSC2005State;
59 enum {
60 TSC_MODE_XYZ_SCAN = 0x0,
61 TSC_MODE_XY_SCAN,
62 TSC_MODE_X,
63 TSC_MODE_Y,
64 TSC_MODE_Z,
65 TSC_MODE_AUX,
66 TSC_MODE_TEMP1,
67 TSC_MODE_TEMP2,
68 TSC_MODE_AUX_SCAN,
69 TSC_MODE_X_TEST,
70 TSC_MODE_Y_TEST,
71 TSC_MODE_TS_TEST,
72 TSC_MODE_RESERVED,
73 TSC_MODE_XX_DRV,
74 TSC_MODE_YY_DRV,
75 TSC_MODE_YX_DRV,
78 static const uint16_t mode_regs[16] = {
79 0xf000, /* X, Y, Z scan */
80 0xc000, /* X, Y scan */
81 0x8000, /* X */
82 0x4000, /* Y */
83 0x3000, /* Z */
84 0x0800, /* AUX */
85 0x0400, /* TEMP1 */
86 0x0200, /* TEMP2 */
87 0x0800, /* AUX scan */
88 0x0040, /* X test */
89 0x0020, /* Y test */
90 0x0080, /* Short-circuit test */
91 0x0000, /* Reserved */
92 0x0000, /* X+, X- drivers */
93 0x0000, /* Y+, Y- drivers */
94 0x0000, /* Y+, X- drivers */
97 #define X_TRANSFORM(s) \
98 ((s->y * s->tr[0] - s->x * s->tr[1]) / s->tr[2] + s->tr[3])
99 #define Y_TRANSFORM(s) \
100 ((s->y * s->tr[4] - s->x * s->tr[5]) / s->tr[6] + s->tr[7])
101 #define Z1_TRANSFORM(s) \
102 ((400 - ((s)->x >> 7) + ((s)->pressure << 10)) << 4)
103 #define Z2_TRANSFORM(s) \
104 ((4000 + ((s)->y >> 7) - ((s)->pressure << 10)) << 4)
106 #define AUX_VAL (700 << 4) /* +/- 3 at 12-bit */
107 #define TEMP1_VAL (1264 << 4) /* +/- 5 at 12-bit */
108 #define TEMP2_VAL (1531 << 4) /* +/- 5 at 12-bit */
110 static uint16_t tsc2005_read(TSC2005State *s, int reg)
112 uint16_t ret;
114 switch (reg) {
115 case 0x0: /* X */
116 s->dav &= ~mode_regs[TSC_MODE_X];
117 return TSC_CUT_RESOLUTION(X_TRANSFORM(s), s->precision) +
118 (s->noise & 3);
119 case 0x1: /* Y */
120 s->dav &= ~mode_regs[TSC_MODE_Y];
121 s->noise ++;
122 return TSC_CUT_RESOLUTION(Y_TRANSFORM(s), s->precision) ^
123 (s->noise & 3);
124 case 0x2: /* Z1 */
125 s->dav &= 0xdfff;
126 return TSC_CUT_RESOLUTION(Z1_TRANSFORM(s), s->precision) -
127 (s->noise & 3);
128 case 0x3: /* Z2 */
129 s->dav &= 0xefff;
130 return TSC_CUT_RESOLUTION(Z2_TRANSFORM(s), s->precision) |
131 (s->noise & 3);
133 case 0x4: /* AUX */
134 s->dav &= ~mode_regs[TSC_MODE_AUX];
135 return TSC_CUT_RESOLUTION(AUX_VAL, s->precision);
137 case 0x5: /* TEMP1 */
138 s->dav &= ~mode_regs[TSC_MODE_TEMP1];
139 return TSC_CUT_RESOLUTION(TEMP1_VAL, s->precision) -
140 (s->noise & 5);
141 case 0x6: /* TEMP2 */
142 s->dav &= 0xdfff;
143 s->dav &= ~mode_regs[TSC_MODE_TEMP2];
144 return TSC_CUT_RESOLUTION(TEMP2_VAL, s->precision) ^
145 (s->noise & 3);
147 case 0x7: /* Status */
148 ret = s->dav | (s->reset << 7) | (s->pdst << 2) | 0x0;
149 s->dav &= ~(mode_regs[TSC_MODE_X_TEST] | mode_regs[TSC_MODE_Y_TEST] |
150 mode_regs[TSC_MODE_TS_TEST]);
151 s->reset = 1;
152 return ret;
154 case 0x8: /* AUX high treshold */
155 return s->aux_thr[1];
156 case 0x9: /* AUX low treshold */
157 return s->aux_thr[0];
159 case 0xa: /* TEMP high treshold */
160 return s->temp_thr[1];
161 case 0xb: /* TEMP low treshold */
162 return s->temp_thr[0];
164 case 0xc: /* CFR0 */
165 return (s->pressure << 15) | ((!s->busy) << 14) |
166 (s->nextprecision << 13) | s->timing[0];
167 case 0xd: /* CFR1 */
168 return s->timing[1];
169 case 0xe: /* CFR2 */
170 return (s->pin_func << 14) | s->filter;
172 case 0xf: /* Function select status */
173 return s->function >= 0 ? 1 << s->function : 0;
176 /* Never gets here */
177 return 0xffff;
180 static void tsc2005_write(TSC2005State *s, int reg, uint16_t data)
182 switch (reg) {
183 case 0x8: /* AUX high treshold */
184 s->aux_thr[1] = data;
185 break;
186 case 0x9: /* AUX low treshold */
187 s->aux_thr[0] = data;
188 break;
190 case 0xa: /* TEMP high treshold */
191 s->temp_thr[1] = data;
192 break;
193 case 0xb: /* TEMP low treshold */
194 s->temp_thr[0] = data;
195 break;
197 case 0xc: /* CFR0 */
198 s->host_mode = data >> 15;
199 if (s->enabled != !(data & 0x4000)) {
200 s->enabled = !(data & 0x4000);
201 fprintf(stderr, "%s: touchscreen sense %sabled\n",
202 __FUNCTION__, s->enabled ? "en" : "dis");
203 if (s->busy && !s->enabled)
204 qemu_del_timer(s->timer);
205 s->busy &= s->enabled;
207 s->nextprecision = (data >> 13) & 1;
208 s->timing[0] = data & 0x1fff;
209 if ((s->timing[0] >> 11) == 3)
210 fprintf(stderr, "%s: illegal conversion clock setting\n",
211 __FUNCTION__);
212 break;
213 case 0xd: /* CFR1 */
214 s->timing[1] = data & 0xf07;
215 break;
216 case 0xe: /* CFR2 */
217 s->pin_func = (data >> 14) & 3;
218 s->filter = data & 0x3fff;
219 break;
221 default:
222 fprintf(stderr, "%s: write into read-only register %x\n",
223 __FUNCTION__, reg);
227 /* This handles most of the chip's logic. */
228 static void tsc2005_pin_update(TSC2005State *s)
230 int64_t expires;
231 int pin_state;
233 switch (s->pin_func) {
234 case 0:
235 pin_state = !s->pressure && !!s->dav;
236 break;
237 case 1:
238 case 3:
239 default:
240 pin_state = !s->dav;
241 break;
242 case 2:
243 pin_state = !s->pressure;
246 if (pin_state != s->irq) {
247 s->irq = pin_state;
248 qemu_set_irq(s->pint, s->irq);
251 switch (s->nextfunction) {
252 case TSC_MODE_XYZ_SCAN:
253 case TSC_MODE_XY_SCAN:
254 if (!s->host_mode && s->dav)
255 s->enabled = 0;
256 if (!s->pressure)
257 return;
258 /* Fall through */
259 case TSC_MODE_AUX_SCAN:
260 break;
262 case TSC_MODE_X:
263 case TSC_MODE_Y:
264 case TSC_MODE_Z:
265 if (!s->pressure)
266 return;
267 /* Fall through */
268 case TSC_MODE_AUX:
269 case TSC_MODE_TEMP1:
270 case TSC_MODE_TEMP2:
271 case TSC_MODE_X_TEST:
272 case TSC_MODE_Y_TEST:
273 case TSC_MODE_TS_TEST:
274 if (s->dav)
275 s->enabled = 0;
276 break;
278 case TSC_MODE_RESERVED:
279 case TSC_MODE_XX_DRV:
280 case TSC_MODE_YY_DRV:
281 case TSC_MODE_YX_DRV:
282 default:
283 return;
286 if (!s->enabled || s->busy)
287 return;
289 s->busy = 1;
290 s->precision = s->nextprecision;
291 s->function = s->nextfunction;
292 s->pdst = !s->pnd0; /* Synchronised on internal clock */
293 expires = qemu_get_clock(vm_clock) + (get_ticks_per_sec() >> 7);
294 qemu_mod_timer(s->timer, expires);
297 static void tsc2005_reset(TSC2005State *s)
299 s->state = 0;
300 s->pin_func = 0;
301 s->enabled = 0;
302 s->busy = 0;
303 s->nextprecision = 0;
304 s->nextfunction = 0;
305 s->timing[0] = 0;
306 s->timing[1] = 0;
307 s->irq = 0;
308 s->dav = 0;
309 s->reset = 0;
310 s->pdst = 1;
311 s->pnd0 = 0;
312 s->function = -1;
313 s->temp_thr[0] = 0x000;
314 s->temp_thr[1] = 0xfff;
315 s->aux_thr[0] = 0x000;
316 s->aux_thr[1] = 0xfff;
318 tsc2005_pin_update(s);
321 static uint8_t tsc2005_txrx_word(void *opaque, uint8_t value)
323 TSC2005State *s = opaque;
324 uint32_t ret = 0;
326 switch (s->state ++) {
327 case 0:
328 if (value & 0x80) {
329 /* Command */
330 if (value & (1 << 1))
331 tsc2005_reset(s);
332 else {
333 s->nextfunction = (value >> 3) & 0xf;
334 s->nextprecision = (value >> 2) & 1;
335 if (s->enabled != !(value & 1)) {
336 s->enabled = !(value & 1);
337 fprintf(stderr, "%s: touchscreen sense %sabled\n",
338 __FUNCTION__, s->enabled ? "en" : "dis");
339 if (s->busy && !s->enabled)
340 qemu_del_timer(s->timer);
341 s->busy &= s->enabled;
343 tsc2005_pin_update(s);
346 s->state = 0;
347 } else if (value) {
348 /* Data transfer */
349 s->reg = (value >> 3) & 0xf;
350 s->pnd0 = (value >> 1) & 1;
351 s->command = value & 1;
353 if (s->command) {
354 /* Read */
355 s->data = tsc2005_read(s, s->reg);
356 tsc2005_pin_update(s);
357 } else
358 s->data = 0;
359 } else
360 s->state = 0;
361 break;
363 case 1:
364 if (s->command)
365 ret = (s->data >> 8) & 0xff;
366 else
367 s->data |= value << 8;
368 break;
370 case 2:
371 if (s->command)
372 ret = s->data & 0xff;
373 else {
374 s->data |= value;
375 tsc2005_write(s, s->reg, s->data);
376 tsc2005_pin_update(s);
379 s->state = 0;
380 break;
383 return ret;
386 uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len)
388 uint32_t ret = 0;
390 len &= ~7;
391 while (len > 0) {
392 len -= 8;
393 ret |= tsc2005_txrx_word(opaque, (value >> len) & 0xff) << len;
396 return ret;
399 static void tsc2005_timer_tick(void *opaque)
401 TSC2005State *s = opaque;
403 /* Timer ticked -- a set of conversions has been finished. */
405 if (!s->busy)
406 return;
408 s->busy = 0;
409 s->dav |= mode_regs[s->function];
410 s->function = -1;
411 tsc2005_pin_update(s);
414 static void tsc2005_touchscreen_event(void *opaque,
415 int x, int y, int z, int buttons_state)
417 TSC2005State *s = opaque;
418 int p = s->pressure;
420 if (buttons_state) {
421 s->x = x;
422 s->y = y;
424 s->pressure = !!buttons_state;
427 * Note: We would get better responsiveness in the guest by
428 * signaling TS events immediately, but for now we simulate
429 * the first conversion delay for sake of correctness.
431 if (p != s->pressure)
432 tsc2005_pin_update(s);
435 static void tsc2005_save(QEMUFile *f, void *opaque)
437 TSC2005State *s = (TSC2005State *) opaque;
438 int i;
440 qemu_put_be16(f, s->x);
441 qemu_put_be16(f, s->y);
442 qemu_put_byte(f, s->pressure);
444 qemu_put_byte(f, s->state);
445 qemu_put_byte(f, s->reg);
446 qemu_put_byte(f, s->command);
448 qemu_put_byte(f, s->irq);
449 qemu_put_be16s(f, &s->dav);
450 qemu_put_be16s(f, &s->data);
452 qemu_put_timer(f, s->timer);
453 qemu_put_byte(f, s->enabled);
454 qemu_put_byte(f, s->host_mode);
455 qemu_put_byte(f, s->function);
456 qemu_put_byte(f, s->nextfunction);
457 qemu_put_byte(f, s->precision);
458 qemu_put_byte(f, s->nextprecision);
459 qemu_put_be16(f, s->filter);
460 qemu_put_byte(f, s->pin_func);
461 qemu_put_be16(f, s->timing[0]);
462 qemu_put_be16(f, s->timing[1]);
463 qemu_put_be16s(f, &s->temp_thr[0]);
464 qemu_put_be16s(f, &s->temp_thr[1]);
465 qemu_put_be16s(f, &s->aux_thr[0]);
466 qemu_put_be16s(f, &s->aux_thr[1]);
467 qemu_put_be32(f, s->noise);
468 qemu_put_byte(f, s->reset);
469 qemu_put_byte(f, s->pdst);
470 qemu_put_byte(f, s->pnd0);
472 for (i = 0; i < 8; i ++)
473 qemu_put_be32(f, s->tr[i]);
476 static int tsc2005_load(QEMUFile *f, void *opaque, int version_id)
478 TSC2005State *s = (TSC2005State *) opaque;
479 int i;
481 s->x = qemu_get_be16(f);
482 s->y = qemu_get_be16(f);
483 s->pressure = qemu_get_byte(f);
485 s->state = qemu_get_byte(f);
486 s->reg = qemu_get_byte(f);
487 s->command = qemu_get_byte(f);
489 s->irq = qemu_get_byte(f);
490 qemu_get_be16s(f, &s->dav);
491 qemu_get_be16s(f, &s->data);
493 qemu_get_timer(f, s->timer);
494 s->enabled = qemu_get_byte(f);
495 s->host_mode = qemu_get_byte(f);
496 s->function = qemu_get_byte(f);
497 s->nextfunction = qemu_get_byte(f);
498 s->precision = qemu_get_byte(f);
499 s->nextprecision = qemu_get_byte(f);
500 s->filter = qemu_get_be16(f);
501 s->pin_func = qemu_get_byte(f);
502 s->timing[0] = qemu_get_be16(f);
503 s->timing[1] = qemu_get_be16(f);
504 qemu_get_be16s(f, &s->temp_thr[0]);
505 qemu_get_be16s(f, &s->temp_thr[1]);
506 qemu_get_be16s(f, &s->aux_thr[0]);
507 qemu_get_be16s(f, &s->aux_thr[1]);
508 s->noise = qemu_get_be32(f);
509 s->reset = qemu_get_byte(f);
510 s->pdst = qemu_get_byte(f);
511 s->pnd0 = qemu_get_byte(f);
513 for (i = 0; i < 8; i ++)
514 s->tr[i] = qemu_get_be32(f);
516 s->busy = qemu_timer_pending(s->timer);
517 tsc2005_pin_update(s);
519 return 0;
522 void *tsc2005_init(qemu_irq pintdav)
524 TSC2005State *s;
526 s = (TSC2005State *)
527 qemu_mallocz(sizeof(TSC2005State));
528 s->x = 400;
529 s->y = 240;
530 s->pressure = 0;
531 s->precision = s->nextprecision = 0;
532 s->timer = qemu_new_timer(vm_clock, tsc2005_timer_tick, s);
533 s->pint = pintdav;
534 s->model = 0x2005;
536 s->tr[0] = 0;
537 s->tr[1] = 1;
538 s->tr[2] = 1;
539 s->tr[3] = 0;
540 s->tr[4] = 1;
541 s->tr[5] = 0;
542 s->tr[6] = 1;
543 s->tr[7] = 0;
545 tsc2005_reset(s);
547 qemu_add_mouse_event_handler(tsc2005_touchscreen_event, s, 1,
548 "QEMU TSC2005-driven Touchscreen");
550 qemu_register_reset((void *) tsc2005_reset, s);
551 register_savevm("tsc2005", -1, 0, tsc2005_save, tsc2005_load, s);
553 return s;
557 * Use tslib generated calibration data to generate ADC input values
558 * from the touchscreen. Assuming 12-bit precision was used during
559 * tslib calibration.
561 void tsc2005_set_transform(void *opaque, MouseTransformInfo *info)
563 TSC2005State *s = (TSC2005State *) opaque;
565 /* This version assumes touchscreen X & Y axis are parallel or
566 * perpendicular to LCD's X & Y axis in some way. */
567 if (abs(info->a[0]) > abs(info->a[1])) {
568 s->tr[0] = 0;
569 s->tr[1] = -info->a[6] * info->x;
570 s->tr[2] = info->a[0];
571 s->tr[3] = -info->a[2] / info->a[0];
572 s->tr[4] = info->a[6] * info->y;
573 s->tr[5] = 0;
574 s->tr[6] = info->a[4];
575 s->tr[7] = -info->a[5] / info->a[4];
576 } else {
577 s->tr[0] = info->a[6] * info->y;
578 s->tr[1] = 0;
579 s->tr[2] = info->a[1];
580 s->tr[3] = -info->a[2] / info->a[1];
581 s->tr[4] = 0;
582 s->tr[5] = -info->a[6] * info->x;
583 s->tr[6] = info->a[3];
584 s->tr[7] = -info->a[5] / info->a[3];
587 s->tr[0] >>= 11;
588 s->tr[1] >>= 11;
589 s->tr[3] <<= 4;
590 s->tr[4] >>= 11;
591 s->tr[5] >>= 11;
592 s->tr[7] <<= 4;