Introduce strtosz_suffix()
[qemu/agraf.git] / hw / blizzard.c
blob5f329ad13fee46115f486dbfd52e5ac96a9afa25
1 /*
2 * Epson S1D13744/S1D13745 (Blizzard/Hailstorm/Tornado) LCD/TV controller.
4 * Copyright (C) 2008 Nokia Corporation
5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
21 #include "qemu-common.h"
22 #include "sysemu.h"
23 #include "console.h"
24 #include "devices.h"
25 #include "vga_int.h"
26 #include "pixel_ops.h"
28 typedef void (*blizzard_fn_t)(uint8_t *, const uint8_t *, unsigned int);
30 typedef struct {
31 uint8_t reg;
32 uint32_t addr;
33 int swallow;
35 int pll;
36 int pll_range;
37 int pll_ctrl;
38 uint8_t pll_mode;
39 uint8_t clksel;
40 int memenable;
41 int memrefresh;
42 uint8_t timing[3];
43 int priority;
45 uint8_t lcd_config;
46 int x;
47 int y;
48 int skipx;
49 int skipy;
50 uint8_t hndp;
51 uint8_t vndp;
52 uint8_t hsync;
53 uint8_t vsync;
54 uint8_t pclk;
55 uint8_t u;
56 uint8_t v;
57 uint8_t yrc[2];
58 int ix[2];
59 int iy[2];
60 int ox[2];
61 int oy[2];
63 int enable;
64 int blank;
65 int bpp;
66 int invalidate;
67 int mx[2];
68 int my[2];
69 uint8_t mode;
70 uint8_t effect;
71 uint8_t iformat;
72 uint8_t source;
73 DisplayState *state;
74 blizzard_fn_t *line_fn_tab[2];
75 void *fb;
77 uint8_t hssi_config[3];
78 uint8_t tv_config;
79 uint8_t tv_timing[4];
80 uint8_t vbi;
81 uint8_t tv_x;
82 uint8_t tv_y;
83 uint8_t tv_test;
84 uint8_t tv_filter_config;
85 uint8_t tv_filter_idx;
86 uint8_t tv_filter_coeff[0x20];
87 uint8_t border_r;
88 uint8_t border_g;
89 uint8_t border_b;
90 uint8_t gamma_config;
91 uint8_t gamma_idx;
92 uint8_t gamma_lut[0x100];
93 uint8_t matrix_ena;
94 uint8_t matrix_coeff[0x12];
95 uint8_t matrix_r;
96 uint8_t matrix_g;
97 uint8_t matrix_b;
98 uint8_t pm;
99 uint8_t status;
100 uint8_t rgbgpio_dir;
101 uint8_t rgbgpio;
102 uint8_t gpio_dir;
103 uint8_t gpio;
104 uint8_t gpio_edge[2];
105 uint8_t gpio_irq;
106 uint8_t gpio_pdown;
108 struct {
109 int x;
110 int y;
111 int dx;
112 int dy;
113 int len;
114 int buflen;
115 void *buf;
116 void *data;
117 uint16_t *ptr;
118 int angle;
119 int pitch;
120 blizzard_fn_t line_fn;
121 } data;
122 } BlizzardState;
124 /* Bytes(!) per pixel */
125 static const int blizzard_iformat_bpp[0x10] = {
127 2, /* RGB 5:6:5*/
128 3, /* RGB 6:6:6 mode 1 */
129 3, /* RGB 8:8:8 mode 1 */
130 0, 0,
131 4, /* RGB 6:6:6 mode 2 */
132 4, /* RGB 8:8:8 mode 2 */
133 0, /* YUV 4:2:2 */
134 0, /* YUV 4:2:0 */
135 0, 0, 0, 0, 0, 0,
138 static inline void blizzard_rgb2yuv(int r, int g, int b,
139 int *y, int *u, int *v)
141 *y = 0x10 + ((0x838 * r + 0x1022 * g + 0x322 * b) >> 13);
142 *u = 0x80 + ((0xe0e * b - 0x04c1 * r - 0x94e * g) >> 13);
143 *v = 0x80 + ((0xe0e * r - 0x0bc7 * g - 0x247 * b) >> 13);
146 static void blizzard_window(BlizzardState *s)
148 uint8_t *src, *dst;
149 int bypp[2];
150 int bypl[3];
151 int y;
152 blizzard_fn_t fn = s->data.line_fn;
154 if (!fn)
155 return;
156 if (s->mx[0] > s->data.x)
157 s->mx[0] = s->data.x;
158 if (s->my[0] > s->data.y)
159 s->my[0] = s->data.y;
160 if (s->mx[1] < s->data.x + s->data.dx)
161 s->mx[1] = s->data.x + s->data.dx;
162 if (s->my[1] < s->data.y + s->data.dy)
163 s->my[1] = s->data.y + s->data.dy;
165 bypp[0] = s->bpp;
166 bypp[1] = (ds_get_bits_per_pixel(s->state) + 7) >> 3;
167 bypl[0] = bypp[0] * s->data.pitch;
168 bypl[1] = bypp[1] * s->x;
169 bypl[2] = bypp[0] * s->data.dx;
171 src = s->data.data;
172 dst = s->fb + bypl[1] * s->data.y + bypp[1] * s->data.x;
173 for (y = s->data.dy; y > 0; y --, src += bypl[0], dst += bypl[1])
174 fn(dst, src, bypl[2]);
177 static int blizzard_transfer_setup(BlizzardState *s)
179 if (s->source > 3 || !s->bpp ||
180 s->ix[1] < s->ix[0] || s->iy[1] < s->iy[0])
181 return 0;
183 s->data.angle = s->effect & 3;
184 s->data.line_fn = s->line_fn_tab[!!s->data.angle][s->iformat];
185 s->data.x = s->ix[0];
186 s->data.y = s->iy[0];
187 s->data.dx = s->ix[1] - s->ix[0] + 1;
188 s->data.dy = s->iy[1] - s->iy[0] + 1;
189 s->data.len = s->bpp * s->data.dx * s->data.dy;
190 s->data.pitch = s->data.dx;
191 if (s->data.len > s->data.buflen) {
192 s->data.buf = qemu_realloc(s->data.buf, s->data.len);
193 s->data.buflen = s->data.len;
195 s->data.ptr = s->data.buf;
196 s->data.data = s->data.buf;
197 s->data.len /= 2;
198 return 1;
201 static void blizzard_reset(BlizzardState *s)
203 s->reg = 0;
204 s->swallow = 0;
206 s->pll = 9;
207 s->pll_range = 1;
208 s->pll_ctrl = 0x14;
209 s->pll_mode = 0x32;
210 s->clksel = 0x00;
211 s->memenable = 0;
212 s->memrefresh = 0x25c;
213 s->timing[0] = 0x3f;
214 s->timing[1] = 0x13;
215 s->timing[2] = 0x21;
216 s->priority = 0;
218 s->lcd_config = 0x74;
219 s->x = 8;
220 s->y = 1;
221 s->skipx = 0;
222 s->skipy = 0;
223 s->hndp = 3;
224 s->vndp = 2;
225 s->hsync = 1;
226 s->vsync = 1;
227 s->pclk = 0x80;
229 s->ix[0] = 0;
230 s->ix[1] = 0;
231 s->iy[0] = 0;
232 s->iy[1] = 0;
233 s->ox[0] = 0;
234 s->ox[1] = 0;
235 s->oy[0] = 0;
236 s->oy[1] = 0;
238 s->yrc[0] = 0x00;
239 s->yrc[1] = 0x30;
240 s->u = 0;
241 s->v = 0;
243 s->iformat = 3;
244 s->source = 0;
245 s->bpp = blizzard_iformat_bpp[s->iformat];
247 s->hssi_config[0] = 0x00;
248 s->hssi_config[1] = 0x00;
249 s->hssi_config[2] = 0x01;
250 s->tv_config = 0x00;
251 s->tv_timing[0] = 0x00;
252 s->tv_timing[1] = 0x00;
253 s->tv_timing[2] = 0x00;
254 s->tv_timing[3] = 0x00;
255 s->vbi = 0x10;
256 s->tv_x = 0x14;
257 s->tv_y = 0x03;
258 s->tv_test = 0x00;
259 s->tv_filter_config = 0x80;
260 s->tv_filter_idx = 0x00;
261 s->border_r = 0x10;
262 s->border_g = 0x80;
263 s->border_b = 0x80;
264 s->gamma_config = 0x00;
265 s->gamma_idx = 0x00;
266 s->matrix_ena = 0x00;
267 memset(&s->matrix_coeff, 0, sizeof(s->matrix_coeff));
268 s->matrix_r = 0x00;
269 s->matrix_g = 0x00;
270 s->matrix_b = 0x00;
271 s->pm = 0x02;
272 s->status = 0x00;
273 s->rgbgpio_dir = 0x00;
274 s->gpio_dir = 0x00;
275 s->gpio_edge[0] = 0x00;
276 s->gpio_edge[1] = 0x00;
277 s->gpio_irq = 0x00;
278 s->gpio_pdown = 0xff;
281 static inline void blizzard_invalidate_display(void *opaque) {
282 BlizzardState *s = (BlizzardState *) opaque;
284 s->invalidate = 1;
287 static uint16_t blizzard_reg_read(void *opaque, uint8_t reg)
289 BlizzardState *s = (BlizzardState *) opaque;
291 switch (reg) {
292 case 0x00: /* Revision Code */
293 return 0xa5;
295 case 0x02: /* Configuration Readback */
296 return 0x83; /* Macrovision OK, CNF[2:0] = 3 */
298 case 0x04: /* PLL M-Divider */
299 return (s->pll - 1) | (1 << 7);
300 case 0x06: /* PLL Lock Range Control */
301 return s->pll_range;
302 case 0x08: /* PLL Lock Synthesis Control 0 */
303 return s->pll_ctrl & 0xff;
304 case 0x0a: /* PLL Lock Synthesis Control 1 */
305 return s->pll_ctrl >> 8;
306 case 0x0c: /* PLL Mode Control 0 */
307 return s->pll_mode;
309 case 0x0e: /* Clock-Source Select */
310 return s->clksel;
312 case 0x10: /* Memory Controller Activate */
313 case 0x14: /* Memory Controller Bank 0 Status Flag */
314 return s->memenable;
316 case 0x18: /* Auto-Refresh Interval Setting 0 */
317 return s->memrefresh & 0xff;
318 case 0x1a: /* Auto-Refresh Interval Setting 1 */
319 return s->memrefresh >> 8;
321 case 0x1c: /* Power-On Sequence Timing Control */
322 return s->timing[0];
323 case 0x1e: /* Timing Control 0 */
324 return s->timing[1];
325 case 0x20: /* Timing Control 1 */
326 return s->timing[2];
328 case 0x24: /* Arbitration Priority Control */
329 return s->priority;
331 case 0x28: /* LCD Panel Configuration */
332 return s->lcd_config;
334 case 0x2a: /* LCD Horizontal Display Width */
335 return s->x >> 3;
336 case 0x2c: /* LCD Horizontal Non-display Period */
337 return s->hndp;
338 case 0x2e: /* LCD Vertical Display Height 0 */
339 return s->y & 0xff;
340 case 0x30: /* LCD Vertical Display Height 1 */
341 return s->y >> 8;
342 case 0x32: /* LCD Vertical Non-display Period */
343 return s->vndp;
344 case 0x34: /* LCD HS Pulse-width */
345 return s->hsync;
346 case 0x36: /* LCd HS Pulse Start Position */
347 return s->skipx >> 3;
348 case 0x38: /* LCD VS Pulse-width */
349 return s->vsync;
350 case 0x3a: /* LCD VS Pulse Start Position */
351 return s->skipy;
353 case 0x3c: /* PCLK Polarity */
354 return s->pclk;
356 case 0x3e: /* High-speed Serial Interface Tx Configuration Port 0 */
357 return s->hssi_config[0];
358 case 0x40: /* High-speed Serial Interface Tx Configuration Port 1 */
359 return s->hssi_config[1];
360 case 0x42: /* High-speed Serial Interface Tx Mode */
361 return s->hssi_config[2];
362 case 0x44: /* TV Display Configuration */
363 return s->tv_config;
364 case 0x46 ... 0x4c: /* TV Vertical Blanking Interval Data bits */
365 return s->tv_timing[(reg - 0x46) >> 1];
366 case 0x4e: /* VBI: Closed Caption / XDS Control / Status */
367 return s->vbi;
368 case 0x50: /* TV Horizontal Start Position */
369 return s->tv_x;
370 case 0x52: /* TV Vertical Start Position */
371 return s->tv_y;
372 case 0x54: /* TV Test Pattern Setting */
373 return s->tv_test;
374 case 0x56: /* TV Filter Setting */
375 return s->tv_filter_config;
376 case 0x58: /* TV Filter Coefficient Index */
377 return s->tv_filter_idx;
378 case 0x5a: /* TV Filter Coefficient Data */
379 if (s->tv_filter_idx < 0x20)
380 return s->tv_filter_coeff[s->tv_filter_idx ++];
381 return 0;
383 case 0x60: /* Input YUV/RGB Translate Mode 0 */
384 return s->yrc[0];
385 case 0x62: /* Input YUV/RGB Translate Mode 1 */
386 return s->yrc[1];
387 case 0x64: /* U Data Fix */
388 return s->u;
389 case 0x66: /* V Data Fix */
390 return s->v;
392 case 0x68: /* Display Mode */
393 return s->mode;
395 case 0x6a: /* Special Effects */
396 return s->effect;
398 case 0x6c: /* Input Window X Start Position 0 */
399 return s->ix[0] & 0xff;
400 case 0x6e: /* Input Window X Start Position 1 */
401 return s->ix[0] >> 3;
402 case 0x70: /* Input Window Y Start Position 0 */
403 return s->ix[0] & 0xff;
404 case 0x72: /* Input Window Y Start Position 1 */
405 return s->ix[0] >> 3;
406 case 0x74: /* Input Window X End Position 0 */
407 return s->ix[1] & 0xff;
408 case 0x76: /* Input Window X End Position 1 */
409 return s->ix[1] >> 3;
410 case 0x78: /* Input Window Y End Position 0 */
411 return s->ix[1] & 0xff;
412 case 0x7a: /* Input Window Y End Position 1 */
413 return s->ix[1] >> 3;
414 case 0x7c: /* Output Window X Start Position 0 */
415 return s->ox[0] & 0xff;
416 case 0x7e: /* Output Window X Start Position 1 */
417 return s->ox[0] >> 3;
418 case 0x80: /* Output Window Y Start Position 0 */
419 return s->oy[0] & 0xff;
420 case 0x82: /* Output Window Y Start Position 1 */
421 return s->oy[0] >> 3;
422 case 0x84: /* Output Window X End Position 0 */
423 return s->ox[1] & 0xff;
424 case 0x86: /* Output Window X End Position 1 */
425 return s->ox[1] >> 3;
426 case 0x88: /* Output Window Y End Position 0 */
427 return s->oy[1] & 0xff;
428 case 0x8a: /* Output Window Y End Position 1 */
429 return s->oy[1] >> 3;
431 case 0x8c: /* Input Data Format */
432 return s->iformat;
433 case 0x8e: /* Data Source Select */
434 return s->source;
435 case 0x90: /* Display Memory Data Port */
436 return 0;
438 case 0xa8: /* Border Color 0 */
439 return s->border_r;
440 case 0xaa: /* Border Color 1 */
441 return s->border_g;
442 case 0xac: /* Border Color 2 */
443 return s->border_b;
445 case 0xb4: /* Gamma Correction Enable */
446 return s->gamma_config;
447 case 0xb6: /* Gamma Correction Table Index */
448 return s->gamma_idx;
449 case 0xb8: /* Gamma Correction Table Data */
450 return s->gamma_lut[s->gamma_idx ++];
452 case 0xba: /* 3x3 Matrix Enable */
453 return s->matrix_ena;
454 case 0xbc ... 0xde: /* Coefficient Registers */
455 return s->matrix_coeff[(reg - 0xbc) >> 1];
456 case 0xe0: /* 3x3 Matrix Red Offset */
457 return s->matrix_r;
458 case 0xe2: /* 3x3 Matrix Green Offset */
459 return s->matrix_g;
460 case 0xe4: /* 3x3 Matrix Blue Offset */
461 return s->matrix_b;
463 case 0xe6: /* Power-save */
464 return s->pm;
465 case 0xe8: /* Non-display Period Control / Status */
466 return s->status | (1 << 5);
467 case 0xea: /* RGB Interface Control */
468 return s->rgbgpio_dir;
469 case 0xec: /* RGB Interface Status */
470 return s->rgbgpio;
471 case 0xee: /* General-purpose IO Pins Configuration */
472 return s->gpio_dir;
473 case 0xf0: /* General-purpose IO Pins Status / Control */
474 return s->gpio;
475 case 0xf2: /* GPIO Positive Edge Interrupt Trigger */
476 return s->gpio_edge[0];
477 case 0xf4: /* GPIO Negative Edge Interrupt Trigger */
478 return s->gpio_edge[1];
479 case 0xf6: /* GPIO Interrupt Status */
480 return s->gpio_irq;
481 case 0xf8: /* GPIO Pull-down Control */
482 return s->gpio_pdown;
484 default:
485 fprintf(stderr, "%s: unknown register %02x\n", __FUNCTION__, reg);
486 return 0;
490 static void blizzard_reg_write(void *opaque, uint8_t reg, uint16_t value)
492 BlizzardState *s = (BlizzardState *) opaque;
494 switch (reg) {
495 case 0x04: /* PLL M-Divider */
496 s->pll = (value & 0x3f) + 1;
497 break;
498 case 0x06: /* PLL Lock Range Control */
499 s->pll_range = value & 3;
500 break;
501 case 0x08: /* PLL Lock Synthesis Control 0 */
502 s->pll_ctrl &= 0xf00;
503 s->pll_ctrl |= (value << 0) & 0x0ff;
504 break;
505 case 0x0a: /* PLL Lock Synthesis Control 1 */
506 s->pll_ctrl &= 0x0ff;
507 s->pll_ctrl |= (value << 8) & 0xf00;
508 break;
509 case 0x0c: /* PLL Mode Control 0 */
510 s->pll_mode = value & 0x77;
511 if ((value & 3) == 0 || (value & 3) == 3)
512 fprintf(stderr, "%s: wrong PLL Control bits (%i)\n",
513 __FUNCTION__, value & 3);
514 break;
516 case 0x0e: /* Clock-Source Select */
517 s->clksel = value & 0xff;
518 break;
520 case 0x10: /* Memory Controller Activate */
521 s->memenable = value & 1;
522 break;
523 case 0x14: /* Memory Controller Bank 0 Status Flag */
524 break;
526 case 0x18: /* Auto-Refresh Interval Setting 0 */
527 s->memrefresh &= 0xf00;
528 s->memrefresh |= (value << 0) & 0x0ff;
529 break;
530 case 0x1a: /* Auto-Refresh Interval Setting 1 */
531 s->memrefresh &= 0x0ff;
532 s->memrefresh |= (value << 8) & 0xf00;
533 break;
535 case 0x1c: /* Power-On Sequence Timing Control */
536 s->timing[0] = value & 0x7f;
537 break;
538 case 0x1e: /* Timing Control 0 */
539 s->timing[1] = value & 0x17;
540 break;
541 case 0x20: /* Timing Control 1 */
542 s->timing[2] = value & 0x35;
543 break;
545 case 0x24: /* Arbitration Priority Control */
546 s->priority = value & 1;
547 break;
549 case 0x28: /* LCD Panel Configuration */
550 s->lcd_config = value & 0xff;
551 if (value & (1 << 7))
552 fprintf(stderr, "%s: data swap not supported!\n", __FUNCTION__);
553 break;
555 case 0x2a: /* LCD Horizontal Display Width */
556 s->x = value << 3;
557 break;
558 case 0x2c: /* LCD Horizontal Non-display Period */
559 s->hndp = value & 0xff;
560 break;
561 case 0x2e: /* LCD Vertical Display Height 0 */
562 s->y &= 0x300;
563 s->y |= (value << 0) & 0x0ff;
564 break;
565 case 0x30: /* LCD Vertical Display Height 1 */
566 s->y &= 0x0ff;
567 s->y |= (value << 8) & 0x300;
568 break;
569 case 0x32: /* LCD Vertical Non-display Period */
570 s->vndp = value & 0xff;
571 break;
572 case 0x34: /* LCD HS Pulse-width */
573 s->hsync = value & 0xff;
574 break;
575 case 0x36: /* LCD HS Pulse Start Position */
576 s->skipx = value & 0xff;
577 break;
578 case 0x38: /* LCD VS Pulse-width */
579 s->vsync = value & 0xbf;
580 break;
581 case 0x3a: /* LCD VS Pulse Start Position */
582 s->skipy = value & 0xff;
583 break;
585 case 0x3c: /* PCLK Polarity */
586 s->pclk = value & 0x82;
587 /* Affects calculation of s->hndp, s->hsync and s->skipx. */
588 break;
590 case 0x3e: /* High-speed Serial Interface Tx Configuration Port 0 */
591 s->hssi_config[0] = value;
592 break;
593 case 0x40: /* High-speed Serial Interface Tx Configuration Port 1 */
594 s->hssi_config[1] = value;
595 if (((value >> 4) & 3) == 3)
596 fprintf(stderr, "%s: Illegal active-data-links value\n",
597 __FUNCTION__);
598 break;
599 case 0x42: /* High-speed Serial Interface Tx Mode */
600 s->hssi_config[2] = value & 0xbd;
601 break;
603 case 0x44: /* TV Display Configuration */
604 s->tv_config = value & 0xfe;
605 break;
606 case 0x46 ... 0x4c: /* TV Vertical Blanking Interval Data bits 0 */
607 s->tv_timing[(reg - 0x46) >> 1] = value;
608 break;
609 case 0x4e: /* VBI: Closed Caption / XDS Control / Status */
610 s->vbi = value;
611 break;
612 case 0x50: /* TV Horizontal Start Position */
613 s->tv_x = value;
614 break;
615 case 0x52: /* TV Vertical Start Position */
616 s->tv_y = value & 0x7f;
617 break;
618 case 0x54: /* TV Test Pattern Setting */
619 s->tv_test = value;
620 break;
621 case 0x56: /* TV Filter Setting */
622 s->tv_filter_config = value & 0xbf;
623 break;
624 case 0x58: /* TV Filter Coefficient Index */
625 s->tv_filter_idx = value & 0x1f;
626 break;
627 case 0x5a: /* TV Filter Coefficient Data */
628 if (s->tv_filter_idx < 0x20)
629 s->tv_filter_coeff[s->tv_filter_idx ++] = value;
630 break;
632 case 0x60: /* Input YUV/RGB Translate Mode 0 */
633 s->yrc[0] = value & 0xb0;
634 break;
635 case 0x62: /* Input YUV/RGB Translate Mode 1 */
636 s->yrc[1] = value & 0x30;
637 break;
638 case 0x64: /* U Data Fix */
639 s->u = value & 0xff;
640 break;
641 case 0x66: /* V Data Fix */
642 s->v = value & 0xff;
643 break;
645 case 0x68: /* Display Mode */
646 if ((s->mode ^ value) & 3)
647 s->invalidate = 1;
648 s->mode = value & 0xb7;
649 s->enable = value & 1;
650 s->blank = (value >> 1) & 1;
651 if (value & (1 << 4))
652 fprintf(stderr, "%s: Macrovision enable attempt!\n", __FUNCTION__);
653 break;
655 case 0x6a: /* Special Effects */
656 s->effect = value & 0xfb;
657 break;
659 case 0x6c: /* Input Window X Start Position 0 */
660 s->ix[0] &= 0x300;
661 s->ix[0] |= (value << 0) & 0x0ff;
662 break;
663 case 0x6e: /* Input Window X Start Position 1 */
664 s->ix[0] &= 0x0ff;
665 s->ix[0] |= (value << 8) & 0x300;
666 break;
667 case 0x70: /* Input Window Y Start Position 0 */
668 s->iy[0] &= 0x300;
669 s->iy[0] |= (value << 0) & 0x0ff;
670 break;
671 case 0x72: /* Input Window Y Start Position 1 */
672 s->iy[0] &= 0x0ff;
673 s->iy[0] |= (value << 8) & 0x300;
674 break;
675 case 0x74: /* Input Window X End Position 0 */
676 s->ix[1] &= 0x300;
677 s->ix[1] |= (value << 0) & 0x0ff;
678 break;
679 case 0x76: /* Input Window X End Position 1 */
680 s->ix[1] &= 0x0ff;
681 s->ix[1] |= (value << 8) & 0x300;
682 break;
683 case 0x78: /* Input Window Y End Position 0 */
684 s->iy[1] &= 0x300;
685 s->iy[1] |= (value << 0) & 0x0ff;
686 break;
687 case 0x7a: /* Input Window Y End Position 1 */
688 s->iy[1] &= 0x0ff;
689 s->iy[1] |= (value << 8) & 0x300;
690 break;
691 case 0x7c: /* Output Window X Start Position 0 */
692 s->ox[0] &= 0x300;
693 s->ox[0] |= (value << 0) & 0x0ff;
694 break;
695 case 0x7e: /* Output Window X Start Position 1 */
696 s->ox[0] &= 0x0ff;
697 s->ox[0] |= (value << 8) & 0x300;
698 break;
699 case 0x80: /* Output Window Y Start Position 0 */
700 s->oy[0] &= 0x300;
701 s->oy[0] |= (value << 0) & 0x0ff;
702 break;
703 case 0x82: /* Output Window Y Start Position 1 */
704 s->oy[0] &= 0x0ff;
705 s->oy[0] |= (value << 8) & 0x300;
706 break;
707 case 0x84: /* Output Window X End Position 0 */
708 s->ox[1] &= 0x300;
709 s->ox[1] |= (value << 0) & 0x0ff;
710 break;
711 case 0x86: /* Output Window X End Position 1 */
712 s->ox[1] &= 0x0ff;
713 s->ox[1] |= (value << 8) & 0x300;
714 break;
715 case 0x88: /* Output Window Y End Position 0 */
716 s->oy[1] &= 0x300;
717 s->oy[1] |= (value << 0) & 0x0ff;
718 break;
719 case 0x8a: /* Output Window Y End Position 1 */
720 s->oy[1] &= 0x0ff;
721 s->oy[1] |= (value << 8) & 0x300;
722 break;
724 case 0x8c: /* Input Data Format */
725 s->iformat = value & 0xf;
726 s->bpp = blizzard_iformat_bpp[s->iformat];
727 if (!s->bpp)
728 fprintf(stderr, "%s: Illegal or unsupported input format %x\n",
729 __FUNCTION__, s->iformat);
730 break;
731 case 0x8e: /* Data Source Select */
732 s->source = value & 7;
733 /* Currently all windows will be "destructive overlays". */
734 if ((!(s->effect & (1 << 3)) && (s->ix[0] != s->ox[0] ||
735 s->iy[0] != s->oy[0] ||
736 s->ix[1] != s->ox[1] ||
737 s->iy[1] != s->oy[1])) ||
738 !((s->ix[1] - s->ix[0]) & (s->iy[1] - s->iy[0]) &
739 (s->ox[1] - s->ox[0]) & (s->oy[1] - s->oy[0]) & 1))
740 fprintf(stderr, "%s: Illegal input/output window positions\n",
741 __FUNCTION__);
743 blizzard_transfer_setup(s);
744 break;
746 case 0x90: /* Display Memory Data Port */
747 if (!s->data.len && !blizzard_transfer_setup(s))
748 break;
750 *s->data.ptr ++ = value;
751 if (-- s->data.len == 0)
752 blizzard_window(s);
753 break;
755 case 0xa8: /* Border Color 0 */
756 s->border_r = value;
757 break;
758 case 0xaa: /* Border Color 1 */
759 s->border_g = value;
760 break;
761 case 0xac: /* Border Color 2 */
762 s->border_b = value;
763 break;
765 case 0xb4: /* Gamma Correction Enable */
766 s->gamma_config = value & 0x87;
767 break;
768 case 0xb6: /* Gamma Correction Table Index */
769 s->gamma_idx = value;
770 break;
771 case 0xb8: /* Gamma Correction Table Data */
772 s->gamma_lut[s->gamma_idx ++] = value;
773 break;
775 case 0xba: /* 3x3 Matrix Enable */
776 s->matrix_ena = value & 1;
777 break;
778 case 0xbc ... 0xde: /* Coefficient Registers */
779 s->matrix_coeff[(reg - 0xbc) >> 1] = value & ((reg & 2) ? 0x80 : 0xff);
780 break;
781 case 0xe0: /* 3x3 Matrix Red Offset */
782 s->matrix_r = value;
783 break;
784 case 0xe2: /* 3x3 Matrix Green Offset */
785 s->matrix_g = value;
786 break;
787 case 0xe4: /* 3x3 Matrix Blue Offset */
788 s->matrix_b = value;
789 break;
791 case 0xe6: /* Power-save */
792 s->pm = value & 0x83;
793 if (value & s->mode & 1)
794 fprintf(stderr, "%s: The display must be disabled before entering "
795 "Standby Mode\n", __FUNCTION__);
796 break;
797 case 0xe8: /* Non-display Period Control / Status */
798 s->status = value & 0x1b;
799 break;
800 case 0xea: /* RGB Interface Control */
801 s->rgbgpio_dir = value & 0x8f;
802 break;
803 case 0xec: /* RGB Interface Status */
804 s->rgbgpio = value & 0xcf;
805 break;
806 case 0xee: /* General-purpose IO Pins Configuration */
807 s->gpio_dir = value;
808 break;
809 case 0xf0: /* General-purpose IO Pins Status / Control */
810 s->gpio = value;
811 break;
812 case 0xf2: /* GPIO Positive Edge Interrupt Trigger */
813 s->gpio_edge[0] = value;
814 break;
815 case 0xf4: /* GPIO Negative Edge Interrupt Trigger */
816 s->gpio_edge[1] = value;
817 break;
818 case 0xf6: /* GPIO Interrupt Status */
819 s->gpio_irq &= value;
820 break;
821 case 0xf8: /* GPIO Pull-down Control */
822 s->gpio_pdown = value;
823 break;
825 default:
826 fprintf(stderr, "%s: unknown register %02x\n", __FUNCTION__, reg);
827 break;
831 uint16_t s1d13745_read(void *opaque, int dc)
833 BlizzardState *s = (BlizzardState *) opaque;
834 uint16_t value = blizzard_reg_read(s, s->reg);
836 if (s->swallow -- > 0)
837 return 0;
838 if (dc)
839 s->reg ++;
841 return value;
844 void s1d13745_write(void *opaque, int dc, uint16_t value)
846 BlizzardState *s = (BlizzardState *) opaque;
848 if (s->swallow -- > 0)
849 return;
850 if (dc) {
851 blizzard_reg_write(s, s->reg, value);
853 if (s->reg != 0x90 && s->reg != 0x5a && s->reg != 0xb8)
854 s->reg += 2;
855 } else
856 s->reg = value & 0xff;
859 void s1d13745_write_block(void *opaque, int dc,
860 void *buf, size_t len, int pitch)
862 BlizzardState *s = (BlizzardState *) opaque;
864 while (len > 0) {
865 if (s->reg == 0x90 && dc &&
866 (s->data.len || blizzard_transfer_setup(s)) &&
867 len >= (s->data.len << 1)) {
868 len -= s->data.len << 1;
869 s->data.len = 0;
870 s->data.data = buf;
871 if (pitch)
872 s->data.pitch = pitch;
873 blizzard_window(s);
874 s->data.data = s->data.buf;
875 continue;
878 s1d13745_write(opaque, dc, *(uint16_t *) buf);
879 len -= 2;
880 buf += 2;
883 return;
886 static void blizzard_update_display(void *opaque)
888 BlizzardState *s = (BlizzardState *) opaque;
889 int y, bypp, bypl, bwidth;
890 uint8_t *src, *dst;
892 if (!s->enable)
893 return;
895 if (s->x != ds_get_width(s->state) || s->y != ds_get_height(s->state)) {
896 s->invalidate = 1;
897 qemu_console_resize(s->state, s->x, s->y);
900 if (s->invalidate) {
901 s->invalidate = 0;
903 if (s->blank) {
904 bypp = (ds_get_bits_per_pixel(s->state) + 7) >> 3;
905 memset(ds_get_data(s->state), 0, bypp * s->x * s->y);
906 return;
909 s->mx[0] = 0;
910 s->mx[1] = s->x;
911 s->my[0] = 0;
912 s->my[1] = s->y;
915 if (s->mx[1] <= s->mx[0])
916 return;
918 bypp = (ds_get_bits_per_pixel(s->state) + 7) >> 3;
919 bypl = bypp * s->x;
920 bwidth = bypp * (s->mx[1] - s->mx[0]);
921 y = s->my[0];
922 src = s->fb + bypl * y + bypp * s->mx[0];
923 dst = ds_get_data(s->state) + bypl * y + bypp * s->mx[0];
924 for (; y < s->my[1]; y ++, src += bypl, dst += bypl)
925 memcpy(dst, src, bwidth);
927 dpy_update(s->state, s->mx[0], s->my[0],
928 s->mx[1] - s->mx[0], y - s->my[0]);
930 s->mx[0] = s->x;
931 s->mx[1] = 0;
932 s->my[0] = s->y;
933 s->my[1] = 0;
936 static void blizzard_screen_dump(void *opaque, const char *filename) {
937 BlizzardState *s = (BlizzardState *) opaque;
939 blizzard_update_display(opaque);
940 if (s && ds_get_data(s->state))
941 ppm_save(filename, s->state->surface);
944 #define DEPTH 8
945 #include "blizzard_template.h"
946 #define DEPTH 15
947 #include "blizzard_template.h"
948 #define DEPTH 16
949 #include "blizzard_template.h"
950 #define DEPTH 24
951 #include "blizzard_template.h"
952 #define DEPTH 32
953 #include "blizzard_template.h"
955 void *s1d13745_init(qemu_irq gpio_int)
957 BlizzardState *s = (BlizzardState *) qemu_mallocz(sizeof(*s));
959 s->fb = qemu_malloc(0x180000);
961 s->state = graphic_console_init(blizzard_update_display,
962 blizzard_invalidate_display,
963 blizzard_screen_dump, NULL, s);
965 switch (ds_get_bits_per_pixel(s->state)) {
966 case 0:
967 s->line_fn_tab[0] = s->line_fn_tab[1] =
968 qemu_mallocz(sizeof(blizzard_fn_t) * 0x10);
969 break;
970 case 8:
971 s->line_fn_tab[0] = blizzard_draw_fn_8;
972 s->line_fn_tab[1] = blizzard_draw_fn_r_8;
973 break;
974 case 15:
975 s->line_fn_tab[0] = blizzard_draw_fn_15;
976 s->line_fn_tab[1] = blizzard_draw_fn_r_15;
977 break;
978 case 16:
979 s->line_fn_tab[0] = blizzard_draw_fn_16;
980 s->line_fn_tab[1] = blizzard_draw_fn_r_16;
981 break;
982 case 24:
983 s->line_fn_tab[0] = blizzard_draw_fn_24;
984 s->line_fn_tab[1] = blizzard_draw_fn_r_24;
985 break;
986 case 32:
987 s->line_fn_tab[0] = blizzard_draw_fn_32;
988 s->line_fn_tab[1] = blizzard_draw_fn_r_32;
989 break;
990 default:
991 fprintf(stderr, "%s: Bad color depth\n", __FUNCTION__);
992 exit(1);
995 blizzard_reset(s);
997 return s;