?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
microblaze: Dont segfault when singlestepping first insn.
[qemu/agraf.git] / hw / eepro100.c
blobb33dbb85c81443a895d26bb808901f137d546275
1 /*
2 * QEMU i8255x (PRO100) emulation
3 *
4 * Copyright (c) 2006-2007 Stefan Weil
5 *
6 * Portions of the code are copies from grub / etherboot eepro100.c
7 * and linux e100.c.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, see <http://www.gnu.org/licenses/>.
21 *
22 * Tested features (i82559):
23 * PXE boot (i386) no valid link
24 * Linux networking (i386) ok
25 *
26 * Untested:
27 * non-i386 platforms
28 * Windows networking
29 *
30 * References:
31 *
32 * Intel 8255x 10/100 Mbps Ethernet Controller Family
33 * Open Source Software Developer Manual
34 */
35
36 #if defined(TARGET_I386)
37 # warning "PXE boot still not working!"
38 #endif
39
40 #include <stddef.h> /* offsetof */
41 #include <stdbool.h>
42 #include "hw.h"
43 #include "pci.h"
44 #include "net.h"
45 #include "eeprom93xx.h"
46
47 /* Common declarations for all PCI devices. */
48
49 #define PCI_CONFIG_8(offset, value) \
50 (pci_conf[offset] = (value))
51 #define PCI_CONFIG_16(offset, value) \
52 (*(uint16_t *)&pci_conf[offset] = cpu_to_le16(value))
53 #define PCI_CONFIG_32(offset, value) \
54 (*(uint32_t *)&pci_conf[offset] = cpu_to_le32(value))
55
56 #define KiB 1024
57
58 /* Debug EEPRO100 card. */
59 //~ #define DEBUG_EEPRO100
60
61 #ifdef DEBUG_EEPRO100
62 #define logout(fmt, ...) fprintf(stderr, "EE100\t%-24s" fmt, __func__, ## __VA_ARGS__)
63 #else
64 #define logout(fmt, ...) ((void)0)
65 #endif
66
67 /* Set flags to 0 to disable debug output. */
68 #define INT 1 /* interrupt related actions */
69 #define MDI 1 /* mdi related actions */
70 #define OTHER 1
71 #define RXTX 1
72 #define EEPROM 1 /* eeprom related actions */
73
74 #define TRACE(flag, command) ((flag) ? (command) : (void)0)
75
76 #define missing(text) fprintf(stderr, "eepro100: feature is missing in this emulation: " text "\n")
77
78 #define MAX_ETH_FRAME_SIZE 1514
79
80 /* This driver supports several different devices which are declared here. */
81 #define i82550 0x82550
82 #define i82551 0x82551
83 #define i82557A 0x82557a
84 #define i82557B 0x82557b
85 #define i82557C 0x82557c
86 #define i82558A 0x82558a
87 #define i82558B 0x82558b
88 #define i82559A 0x82559a
89 #define i82559B 0x82559b
90 #define i82559C 0x82559c
91 #define i82559ER 0x82559e
92 #define i82562 0x82562
93
94 /* Use 64 word EEPROM. TODO: could be a runtime option. */
95 #define EEPROM_SIZE 64
96
97 #define PCI_MEM_SIZE (4 * KiB)
98 #define PCI_IO_SIZE 64
99 #define PCI_FLASH_SIZE (128 * KiB)
100
101 #define BIT(n) (1 << (n))
102 #define BITS(n, m) (((0xffffffffU << (31 - n)) >> (31 - n + m)) << m)
103
104 /* The SCB accepts the following controls for the Tx and Rx units: */
105 #define CU_NOP 0x0000 /* No operation. */
106 #define CU_START 0x0010 /* CU start. */
107 #define CU_RESUME 0x0020 /* CU resume. */
108 #define CU_STATSADDR 0x0040 /* Load dump counters address. */
109 #define CU_SHOWSTATS 0x0050 /* Dump statistical counters. */
110 #define CU_CMD_BASE 0x0060 /* Load CU base address. */
111 #define CU_DUMPSTATS 0x0070 /* Dump and reset statistical counters. */
112 #define CU_SRESUME 0x00a0 /* CU static resume. */
113
114 #define RU_NOP 0x0000
115 #define RX_START 0x0001
116 #define RX_RESUME 0x0002
117 #define RX_ABORT 0x0004
118 #define RX_ADDR_LOAD 0x0006
119 #define RX_RESUMENR 0x0007
120 #define INT_MASK 0x0100
121 #define DRVR_INT 0x0200 /* Driver generated interrupt. */
122
123 /* Offsets to the various registers.
124 All accesses need not be longword aligned. */
125 enum speedo_offsets {
126 SCBStatus = 0,
127 SCBAck = 1,
128 SCBCmd = 2, /* Rx/Command Unit command and status. */
129 SCBIntmask = 3,
130 SCBPointer = 4, /* General purpose pointer. */
131 SCBPort = 8, /* Misc. commands and operands. */
132 SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */
133 SCBCtrlMDI = 16, /* MDI interface control. */
134 SCBEarlyRx = 20, /* Early receive byte count. */
135 SCBFlow = 24,
136 };
137
138 /* A speedo3 transmit buffer descriptor with two buffers... */
139 typedef struct {
140 uint16_t status;
141 uint16_t command;
142 uint32_t link; /* void * */
143 uint32_t tbd_array_addr; /* transmit buffer descriptor array address. */
144 uint16_t tcb_bytes; /* transmit command block byte count (in lower 14 bits */
145 uint8_t tx_threshold; /* transmit threshold */
146 uint8_t tbd_count; /* TBD number */
147 //~ /* This constitutes two "TBD" entries: hdr and data */
148 //~ uint32_t tx_buf_addr0; /* void *, header of frame to be transmitted. */
149 //~ int32_t tx_buf_size0; /* Length of Tx hdr. */
150 //~ uint32_t tx_buf_addr1; /* void *, data to be transmitted. */
151 //~ int32_t tx_buf_size1; /* Length of Tx data. */
152 } eepro100_tx_t;
153
154 /* Receive frame descriptor. */
155 typedef struct {
156 int16_t status;
157 uint16_t command;
158 uint32_t link; /* struct RxFD * */
159 uint32_t rx_buf_addr; /* void * */
160 uint16_t count;
161 uint16_t size;
162 char packet[MAX_ETH_FRAME_SIZE + 4];
163 } eepro100_rx_t;
164
165 typedef struct {
166 uint32_t tx_good_frames, tx_max_collisions, tx_late_collisions,
167 tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
168 tx_multiple_collisions, tx_total_collisions;
169 uint32_t rx_good_frames, rx_crc_errors, rx_alignment_errors,
170 rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
171 rx_short_frame_errors;
172 uint32_t fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
173 uint16_t xmt_tco_frames, rcv_tco_frames;
174 /* TODO: i82559 has six reserved statistics but a total of 24 dwords. */
175 uint32_t reserved[4];
176 } eepro100_stats_t;
177
178 typedef enum {
179 cu_idle = 0,
180 cu_suspended = 1,
181 cu_active = 2,
182 cu_lpq_active = 2,
183 cu_hqp_active = 3
184 } cu_state_t;
185
186 typedef enum {
187 ru_idle = 0,
188 ru_suspended = 1,
189 ru_no_resources = 2,
190 ru_ready = 4
191 } ru_state_t;
192
193 typedef struct {
194 PCIDevice dev;
195 uint8_t mult[8]; /* multicast mask array */
196 int mmio_index;
197 NICState *nic;
198 NICConf conf;
199 uint8_t scb_stat; /* SCB stat/ack byte */
200 uint8_t int_stat; /* PCI interrupt status */
201 /* region must not be saved by nic_save. */
202 uint32_t region[3]; /* PCI region addresses */
203 uint16_t mdimem[32];
204 eeprom_t *eeprom;
205 uint32_t device; /* device variant */
206 uint32_t pointer;
207 /* (cu_base + cu_offset) address the next command block in the command block list. */
208 uint32_t cu_base; /* CU base address */
209 uint32_t cu_offset; /* CU address offset */
210 /* (ru_base + ru_offset) address the RFD in the Receive Frame Area. */
211 uint32_t ru_base; /* RU base address */
212 uint32_t ru_offset; /* RU address offset */
213 uint32_t statsaddr; /* pointer to eepro100_stats_t */
214
215 /* Temporary status information (no need to save these values),
216 * used while processing CU commands. */
217 eepro100_tx_t tx; /* transmit buffer descriptor */
218 uint32_t cb_address; /* = cu_base + cu_offset */
219
220 /* Statistical counters. Also used for wake-up packet (i82559). */
221 eepro100_stats_t statistics;
222
223 #if 0
224 uint16_t status;
225 #endif
226
227 /* Configuration bytes. */
228 uint8_t configuration[22];
229
230 /* Data in mem is always in the byte order of the controller (le). */
231 uint8_t mem[PCI_MEM_SIZE];
232 /* vmstate for each particular nic */
233 VMStateDescription *vmstate;
234
235 /* Quasi static device properties (no need to save them). */
236 uint16_t stats_size;
237 bool has_extended_tcb_support;
238 } EEPRO100State;
239
240 /* Default values for MDI (PHY) registers */
241 static const uint16_t eepro100_mdi_default[] = {
242 /* MDI Registers 0 - 6, 7 */
243 0x3000, 0x780d, 0x02a8, 0x0154, 0x05e1, 0x0000, 0x0000, 0x0000,
244 /* MDI Registers 8 - 15 */
245 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
246 /* MDI Registers 16 - 31 */
247 0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
248 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
249 };
250
251 /* Readonly mask for MDI (PHY) registers */
252 static const uint16_t eepro100_mdi_mask[] = {
253 0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000,
254 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
255 0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
256 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
257 };
258
259 /* XXX: optimize */
260 static void stl_le_phys(target_phys_addr_t addr, uint32_t val)
261 {
262 val = cpu_to_le32(val);
263 cpu_physical_memory_write(addr, (const uint8_t *)&val, sizeof(val));
264 }
265
266 #define POLYNOMIAL 0x04c11db6
267
268 /* From FreeBSD */
269 /* XXX: optimize */
270 static unsigned compute_mcast_idx(const uint8_t * ep)
271 {
272 uint32_t crc;
273 int carry, i, j;
274 uint8_t b;
275
276 crc = 0xffffffff;
277 for (i = 0; i < 6; i++) {
278 b = *ep++;
279 for (j = 0; j < 8; j++) {
280 carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
281 crc <<= 1;
282 b >>= 1;
283 if (carry) {
284 crc = ((crc ^ POLYNOMIAL) | carry);
285 }
286 }
287 }
288 return (crc & BITS(7, 2)) >> 2;
289 }
290
291 #if defined(DEBUG_EEPRO100)
292 static const char *nic_dump(const uint8_t * buf, unsigned size)
293 {
294 static char dump[3 * 16 + 1];
295 char *p = &dump[0];
296 if (size > 16) {
297 size = 16;
298 }
299 while (size-- > 0) {
300 p += sprintf(p, " %02x", *buf++);
301 }
302 return dump;
303 }
304 #endif /* DEBUG_EEPRO100 */
305
306 enum scb_stat_ack {
307 stat_ack_not_ours = 0x00,
308 stat_ack_sw_gen = 0x04,
309 stat_ack_rnr = 0x10,
310 stat_ack_cu_idle = 0x20,
311 stat_ack_frame_rx = 0x40,
312 stat_ack_cu_cmd_done = 0x80,
313 stat_ack_not_present = 0xFF,
314 stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
315 stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
316 };
317
318 static void disable_interrupt(EEPRO100State * s)
319 {
320 if (s->int_stat) {
321 TRACE(INT, logout("interrupt disabled\n"));
322 qemu_irq_lower(s->dev.irq[0]);
323 s->int_stat = 0;
324 }
325 }
326
327 static void enable_interrupt(EEPRO100State * s)
328 {
329 if (!s->int_stat) {
330 TRACE(INT, logout("interrupt enabled\n"));
331 qemu_irq_raise(s->dev.irq[0]);
332 s->int_stat = 1;
333 }
334 }
335
336 static void eepro100_acknowledge(EEPRO100State * s)
337 {
338 s->scb_stat &= ~s->mem[SCBAck];
339 s->mem[SCBAck] = s->scb_stat;
340 if (s->scb_stat == 0) {
341 disable_interrupt(s);
342 }
343 }
344
345 static void eepro100_interrupt(EEPRO100State * s, uint8_t stat)
346 {
347 uint8_t mask = ~s->mem[SCBIntmask];
348 s->mem[SCBAck] |= stat;
349 stat = s->scb_stat = s->mem[SCBAck];
350 stat &= (mask | 0x0f);
351 //~ stat &= (~s->mem[SCBIntmask] | 0x0xf);
352 if (stat && (mask & 0x01)) {
353 /* SCB mask and SCB Bit M do not disable interrupt. */
354 enable_interrupt(s);
355 } else if (s->int_stat) {
356 disable_interrupt(s);
357 }
358 }
359
360 static void eepro100_cx_interrupt(EEPRO100State * s)
361 {
362 /* CU completed action command. */
363 /* Transmit not ok (82557 only, not in emulation). */
364 eepro100_interrupt(s, 0x80);
365 }
366
367 static void eepro100_cna_interrupt(EEPRO100State * s)
368 {
369 /* CU left the active state. */
370 eepro100_interrupt(s, 0x20);
371 }
372
373 static void eepro100_fr_interrupt(EEPRO100State * s)
374 {
375 /* RU received a complete frame. */
376 eepro100_interrupt(s, 0x40);
377 }
378
379 #if 0
380 static void eepro100_rnr_interrupt(EEPRO100State * s)
381 {
382 /* RU is not ready. */
383 eepro100_interrupt(s, 0x10);
384 }
385 #endif
386
387 static void eepro100_mdi_interrupt(EEPRO100State * s)
388 {
389 /* MDI completed read or write cycle. */
390 eepro100_interrupt(s, 0x08);
391 }
392
393 static void eepro100_swi_interrupt(EEPRO100State * s)
394 {
395 /* Software has requested an interrupt. */
396 eepro100_interrupt(s, 0x04);
397 }
398
399 #if 0
400 static void eepro100_fcp_interrupt(EEPRO100State * s)
401 {
402 /* Flow control pause interrupt (82558 and later). */
403 eepro100_interrupt(s, 0x01);
404 }
405 #endif
406
407 static void pci_reset(EEPRO100State * s)
408 {
409 uint32_t device = s->device;
410 uint8_t *pci_conf = s->dev.config;
411 bool power_management = 1;
412
413 TRACE(OTHER, logout("%p\n", s));
414
415 /* PCI Vendor ID */
416 pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
417 /* PCI Device ID depends on device and is set below. */
418 /* PCI Command */
419 /* TODO: this is the default, do not override. */
420 PCI_CONFIG_16(PCI_COMMAND, 0x0000);
421 /* PCI Status */
422 /* TODO: Value at RST# should be 0. */
423 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK);
424 /* PCI Revision ID */
425 PCI_CONFIG_8(PCI_REVISION_ID, 0x08);
426 /* TODO: this is the default, do not override. */
427 /* PCI Class Code */
428 PCI_CONFIG_8(PCI_CLASS_PROG, 0x00);
429 pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET);
430 /* PCI Cache Line Size */
431 /* check cache line size!!! */
432 //~ PCI_CONFIG_8(0x0c, 0x00);
433 /* PCI Latency Timer */
434 PCI_CONFIG_8(PCI_LATENCY_TIMER, 0x20); // latency timer = 32 clocks
435 /* PCI Header Type */
436 /* BIST (built-in self test) */
437 #if defined(TARGET_I386)
438 // !!! workaround for buggy bios
439 //~ #define PCI_BASE_ADDRESS_MEM_PREFETCH 0
440 #endif
441 #if 0
442 /* PCI Base Address Registers */
443 /* CSR Memory Mapped Base Address */
444 PCI_CONFIG_32(PCI_BASE_ADDRESS_0,
445 PCI_BASE_ADDRESS_SPACE_MEMORY |
446 PCI_BASE_ADDRESS_MEM_PREFETCH);
447 /* CSR I/O Mapped Base Address */
448 PCI_CONFIG_32(PCI_BASE_ADDRESS_1, PCI_BASE_ADDRESS_SPACE_IO);
449 #if 0
450 /* Flash Memory Mapped Base Address */
451 PCI_CONFIG_32(PCI_BASE_ADDRESS_2,
452 0xfffe0000 | PCI_BASE_ADDRESS_SPACE_MEMORY);
453 #endif
454 #endif
455 /* Expansion ROM Base Address (depends on boot disable!!!) */
456 /* TODO: not needed, set when BAR is registered */
457 PCI_CONFIG_32(PCI_ROM_ADDRESS, PCI_BASE_ADDRESS_SPACE_MEMORY);
458 /* Capability Pointer */
459 /* TODO: revisions with power_management 1 use this but
460 * do not set new capability list bit in status register. */
461 PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0xdc);
462 /* Interrupt Line */
463 /* Interrupt Pin */
464 /* TODO: RST# value should be 0 */
465 PCI_CONFIG_8(PCI_INTERRUPT_PIN, 1); // interrupt pin 0
466 /* Minimum Grant */
467 PCI_CONFIG_8(PCI_MIN_GNT, 0x08);
468 /* Maximum Latency */
469 PCI_CONFIG_8(PCI_MAX_LAT, 0x18);
470
471 switch (device) {
472 case i82550:
473 // TODO: check device id.
474 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT);
475 /* Revision ID: 0x0c, 0x0d, 0x0e. */
476 PCI_CONFIG_8(PCI_REVISION_ID, 0x0e);
477 // TODO: check size of statistical counters.
478 s->stats_size = 80;
479 // TODO: check extended tcb support.
480 s->has_extended_tcb_support = 1;
481 break;
482 case i82551:
483 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT);
484 /* Revision ID: 0x0f, 0x10. */
485 PCI_CONFIG_8(PCI_REVISION_ID, 0x0f);
486 // TODO: check size of statistical counters.
487 s->stats_size = 80;
488 s->has_extended_tcb_support = 1;
489 break;
490 case i82557A:
491 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
492 PCI_CONFIG_8(PCI_REVISION_ID, 0x01);
493 PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0x00);
494 power_management = 0;
495 break;
496 case i82557B:
497 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
498 PCI_CONFIG_8(PCI_REVISION_ID, 0x02);
499 PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0x00);
500 power_management = 0;
501 break;
502 case i82557C:
503 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
504 PCI_CONFIG_8(PCI_REVISION_ID, 0x03);
505 PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0x00);
506 power_management = 0;
507 break;
508 case i82558A:
509 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
510 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
511 PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST);
512 PCI_CONFIG_8(PCI_REVISION_ID, 0x04);
513 s->stats_size = 76;
514 s->has_extended_tcb_support = 1;
515 break;
516 case i82558B:
517 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
518 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
519 PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST);
520 PCI_CONFIG_8(PCI_REVISION_ID, 0x05);
521 s->stats_size = 76;
522 s->has_extended_tcb_support = 1;
523 break;
524 case i82559A:
525 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
526 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
527 PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST);
528 PCI_CONFIG_8(PCI_REVISION_ID, 0x06);
529 s->stats_size = 80;
530 s->has_extended_tcb_support = 1;
531 break;
532 case i82559B:
533 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
534 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
535 PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST);
536 PCI_CONFIG_8(PCI_REVISION_ID, 0x07);
537 s->stats_size = 80;
538 s->has_extended_tcb_support = 1;
539 break;
540 case i82559C:
541 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557);
542 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
543 PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST);
544 PCI_CONFIG_8(PCI_REVISION_ID, 0x08);
545 // TODO: Windows wants revision id 0x0c.
546 PCI_CONFIG_8(PCI_REVISION_ID, 0x0c);
547 #if EEPROM_SIZE > 0
548 PCI_CONFIG_16(PCI_SUBSYSTEM_VENDOR_ID, 0x8086);
549 PCI_CONFIG_16(PCI_SUBSYSTEM_ID, 0x0040);
550 #endif
551 s->stats_size = 80;
552 s->has_extended_tcb_support = 1;
553 break;
554 case i82559ER:
555 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT);
556 PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
557 PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST);
558 PCI_CONFIG_8(PCI_REVISION_ID, 0x09);
559 s->stats_size = 80;
560 s->has_extended_tcb_support = 1;
561 break;
562 case i82562:
563 // TODO: check device id.
564 pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT);
565 /* TODO: wrong revision id. */
566 PCI_CONFIG_8(PCI_REVISION_ID, 0x0e);
567 s->stats_size = 80;
568 s->has_extended_tcb_support = 1;
569 break;
570 default:
571 logout("Device %X is undefined!\n", device);
572 }
573
574 s->configuration[6] |= BIT(5);
575
576 if (s->stats_size == 80) {
577 /* TODO: check TCO Statistical Counters bit. Documentation not clear. */
578 if (s->configuration[6] & BIT(2)) {
579 /* TCO statistical counters. */
580 assert(s->configuration[6] & BIT(5));
581 } else {
582 if (s->configuration[6] & BIT(5)) {
583 /* No extended statistical counters, i82557 compatible. */
584 s->stats_size = 64;
585 } else {
586 /* i82558 compatible. */
587 s->stats_size = 76;
588 }
589 }
590 } else {
591 if (s->configuration[6] & BIT(5)) {
592 /* No extended statistical counters. */
593 s->stats_size = 64;
594 }
595 }
596 assert(s->stats_size > 0 && s->stats_size <= sizeof(s->statistics));
597
598 if (power_management) {
599 /* Power Management Capabilities */
600 PCI_CONFIG_8(0xdc, 0x01);
601 /* Next Item Pointer */
602 /* Capability ID */
603 PCI_CONFIG_16(0xde, 0x7e21);
604 /* TODO: Power Management Control / Status. */
605 /* TODO: Ethernet Power Consumption Registers (i82559 and later). */
606 }
607
608 #if EEPROM_SIZE > 0
609 if (device == i82557C || device == i82558B || device == i82559C) {
610 // TODO: get vendor id from EEPROM for i82557C or later.
611 // TODO: get device id from EEPROM for i82557C or later.
612 // TODO: status bit 4 can be disabled by EEPROM for i82558, i82559.
613 // TODO: header type is determined by EEPROM for i82559.
614 // TODO: get subsystem id from EEPROM for i82557C or later.
615 // TODO: get subsystem vendor id from EEPROM for i82557C or later.
616 // TODO: exp. rom baddr depends on a bit in EEPROM for i82558 or later.
617 // TODO: capability pointer depends on EEPROM for i82558.
618 logout("Get device id and revision from EEPROM!!!\n");
619 }
620 #endif /* EEPROM_SIZE > 0 */
621 }
622
623 static void nic_selective_reset(EEPRO100State * s)
624 {
625 size_t i;
626 uint16_t *eeprom_contents = eeprom93xx_data(s->eeprom);
627 //~ eeprom93xx_reset(s->eeprom);
628 memcpy(eeprom_contents, s->conf.macaddr.a, 6);
629 eeprom_contents[0xa] = 0x4000;
630 if (s->device == i82557B || s->device == i82557C)
631 eeprom_contents[5] = 0x0100;
632 uint16_t sum = 0;
633 for (i = 0; i < EEPROM_SIZE - 1; i++) {
634 sum += eeprom_contents[i];
635 }
636 eeprom_contents[EEPROM_SIZE - 1] = 0xbaba - sum;
637 TRACE(EEPROM, logout("checksum=0x%04x\n", eeprom_contents[EEPROM_SIZE - 1]));
638
639 memset(s->mem, 0, sizeof(s->mem));
640 uint32_t val = BIT(21);
641 memcpy(&s->mem[SCBCtrlMDI], &val, sizeof(val));
642
643 assert(sizeof(s->mdimem) == sizeof(eepro100_mdi_default));
644 memcpy(&s->mdimem[0], &eepro100_mdi_default[0], sizeof(s->mdimem));
645 }
646
647 static void nic_reset(void *opaque)
648 {
649 EEPRO100State *s = opaque;
650 TRACE(OTHER, logout("%p\n", s));
651 /* TODO: Clearing of multicast table for selective reset, too? */
652 memset(&s->mult[0], 0, sizeof(s->mult));
653 nic_selective_reset(s);
654 }
655
656 #if defined(DEBUG_EEPRO100)
657 static const char * const e100_reg[PCI_IO_SIZE / 4] = {
658 "Command/Status",
659 "General Pointer",
660 "Port",
661 "EEPROM/Flash Control",
662 "MDI Control",
663 "Receive DMA Byte Count",
664 "Flow Control",
665 "General Status/Control"
666 };
667
668 static char *regname(uint32_t addr)
669 {
670 static char buf[32];
671 if (addr < PCI_IO_SIZE) {
672 const char *r = e100_reg[addr / 4];
673 if (r != 0) {
674 snprintf(buf, sizeof(buf), "%s+%u", r, addr % 4);
675 } else {
676 snprintf(buf, sizeof(buf), "0x%02x", addr);
677 }
678 } else {
679 snprintf(buf, sizeof(buf), "??? 0x%08x", addr);
680 }
681 return buf;
682 }
683 #endif /* DEBUG_EEPRO100 */
684
685 #if 0
686 static uint16_t eepro100_read_status(EEPRO100State * s)
687 {
688 uint16_t val = s->status;
689 TRACE(OTHER, logout("val=0x%04x\n", val));
690 return val;
691 }
692
693 static void eepro100_write_status(EEPRO100State * s, uint16_t val)
694 {
695 TRACE(OTHER, logout("val=0x%04x\n", val));
696 s->status = val;
697 }
698 #endif
699
700 /*****************************************************************************
701 *
702 * Command emulation.
703 *
704 ****************************************************************************/
705
706 #if 0
707 static uint16_t eepro100_read_command(EEPRO100State * s)
708 {
709 uint16_t val = 0xffff;
710 //~ TRACE(OTHER, logout("val=0x%04x\n", val));
711 return val;
712 }
713 #endif
714
715 /* Commands that can be put in a command list entry. */
716 enum commands {
717 CmdNOp = 0,
718 CmdIASetup = 1,
719 CmdConfigure = 2,
720 CmdMulticastList = 3,
721 CmdTx = 4,
722 CmdTDR = 5, /* load microcode */
723 CmdDump = 6,
724 CmdDiagnose = 7,
725
726 /* And some extra flags: */
727 CmdSuspend = 0x4000, /* Suspend after completion. */
728 CmdIntr = 0x2000, /* Interrupt after completion. */
729 CmdTxFlex = 0x0008, /* Use "Flexible mode" for CmdTx command. */
730 };
731
732 static cu_state_t get_cu_state(EEPRO100State * s)
733 {
734 return ((s->mem[SCBStatus] >> 6) & 0x03);
735 }
736
737 static void set_cu_state(EEPRO100State * s, cu_state_t state)
738 {
739 s->mem[SCBStatus] = (s->mem[SCBStatus] & 0x3f) + (state << 6);
740 }
741
742 static ru_state_t get_ru_state(EEPRO100State * s)
743 {
744 return ((s->mem[SCBStatus] >> 2) & 0x0f);
745 }
746
747 static void set_ru_state(EEPRO100State * s, ru_state_t state)
748 {
749 s->mem[SCBStatus] = (s->mem[SCBStatus] & 0xc3) + (state << 2);
750 }
751
752 static void dump_statistics(EEPRO100State * s)
753 {
754 /* Dump statistical data. Most data is never changed by the emulation
755 * and always 0, so we first just copy the whole block and then those
756 * values which really matter.
757 * Number of data should check configuration!!!
758 */
759 cpu_physical_memory_write(s->statsaddr,
760 (uint8_t *) & s->statistics, s->stats_size);
761 stl_le_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
762 stl_le_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
763 stl_le_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
764 stl_le_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
765 //~ stw_le_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
766 //~ stw_le_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
767 //~ missing("CU dump statistical counters");
768 }
769
770 static void tx_command(EEPRO100State *s)
771 {
772 uint32_t tbd_array = le32_to_cpu(s->tx.tbd_array_addr);
773 uint16_t tcb_bytes = (le16_to_cpu(s->tx.tcb_bytes) & 0x3fff);
774 /* Sends larger than MAX_ETH_FRAME_SIZE are allowed, up to 2600 bytes. */
775 uint8_t buf[2600];
776 uint16_t size = 0;
777 uint32_t tbd_address = s->cb_address + 0x10;
778 TRACE(RXTX, logout
779 ("transmit, TBD array address 0x%08x, TCB byte count 0x%04x, TBD count %u\n",
780 tbd_array, tcb_bytes, s->tx.tbd_count));
781
782 if (tcb_bytes > 2600) {
783 logout("TCB byte count too large, using 2600\n");
784 tcb_bytes = 2600;
785 }
786 if (!((tcb_bytes > 0) || (tbd_array != 0xffffffff))) {
787 logout
788 ("illegal values of TBD array address and TCB byte count!\n");
789 }
790 assert(tcb_bytes <= sizeof(buf));
791 while (size < tcb_bytes) {
792 uint32_t tx_buffer_address = ldl_phys(tbd_address);
793 uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
794 //~ uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
795 tbd_address += 8;
796 TRACE(RXTX, logout
797 ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
798 tx_buffer_address, tx_buffer_size));
799 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
800 cpu_physical_memory_read(tx_buffer_address, &buf[size],
801 tx_buffer_size);
802 size += tx_buffer_size;
803 }
804 if (tbd_array == 0xffffffff) {
805 /* Simplified mode. Was already handled by code above. */
806 } else {
807 /* Flexible mode. */
808 uint8_t tbd_count = 0;
809 if (s->has_extended_tcb_support && !(s->configuration[6] & BIT(4))) {
810 /* Extended Flexible TCB. */
811 for (; tbd_count < 2; tbd_count++) {
812 uint32_t tx_buffer_address = ldl_phys(tbd_address);
813 uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
814 uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
815 tbd_address += 8;
816 TRACE(RXTX, logout
817 ("TBD (extended flexible mode): buffer address 0x%08x, size 0x%04x\n",
818 tx_buffer_address, tx_buffer_size));
819 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
820 cpu_physical_memory_read(tx_buffer_address, &buf[size],
821 tx_buffer_size);
822 size += tx_buffer_size;
823 if (tx_buffer_el & 1) {
824 break;
825 }
826 }
827 }
828 tbd_address = tbd_array;
829 for (; tbd_count < s->tx.tbd_count; tbd_count++) {
830 uint32_t tx_buffer_address = ldl_phys(tbd_address);
831 uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
832 uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
833 tbd_address += 8;
834 TRACE(RXTX, logout
835 ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
836 tx_buffer_address, tx_buffer_size));
837 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
838 cpu_physical_memory_read(tx_buffer_address, &buf[size],
839 tx_buffer_size);
840 size += tx_buffer_size;
841 if (tx_buffer_el & 1) {
842 break;
843 }
844 }
845 }
846 TRACE(RXTX, logout("%p sending frame, len=%d,%s\n", s, size, nic_dump(buf, size)));
847 qemu_send_packet(&s->nic->nc, buf, size);
848 s->statistics.tx_good_frames++;
849 /* Transmit with bad status would raise an CX/TNO interrupt.
850 * (82557 only). Emulation never has bad status. */
851 //~ eepro100_cx_interrupt(s);
852 }
853
854 static void set_multicast_list(EEPRO100State *s)
855 {
856 uint16_t multicast_count = s->tx.tbd_array_addr & BITS(13, 0);
857 uint16_t i;
858 memset(&s->mult[0], 0, sizeof(s->mult));
859 TRACE(OTHER, logout("multicast list, multicast count = %u\n", multicast_count));
860 for (i = 0; i < multicast_count; i += 6) {
861 uint8_t multicast_addr[6];
862 cpu_physical_memory_read(s->cb_address + 10 + i, multicast_addr, 6);
863 TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr, 6)));
864 unsigned mcast_idx = compute_mcast_idx(multicast_addr);
865 assert(mcast_idx < 64);
866 s->mult[mcast_idx >> 3] |= (1 << (mcast_idx & 7));
867 }
868 }
869
870 static void action_command(EEPRO100State *s)
871 {
872 for (;;) {
873 s->cb_address = s->cu_base + s->cu_offset;
874 cpu_physical_memory_read(s->cb_address, (uint8_t *)&s->tx, sizeof(s->tx));
875 uint16_t status = le16_to_cpu(s->tx.status);
876 uint16_t command = le16_to_cpu(s->tx.command);
877 logout
878 ("val=0x%02x (cu start), status=0x%04x, command=0x%04x, link=0x%08x\n",
879 val, status, command, s->tx.link);
880 bool bit_el = ((command & 0x8000) != 0);
881 bool bit_s = ((command & 0x4000) != 0);
882 bool bit_i = ((command & 0x2000) != 0);
883 bool bit_nc = ((command & 0x0010) != 0);
884 bool success = true;
885 //~ bool bit_sf = ((command & 0x0008) != 0);
886 uint16_t cmd = command & 0x0007;
887 s->cu_offset = le32_to_cpu(s->tx.link);
888 switch (cmd) {
889 case CmdNOp:
890 /* Do nothing. */
891 break;
892 case CmdIASetup:
893 cpu_physical_memory_read(s->cb_address + 8, &s->conf.macaddr.a[0], 6);
894 TRACE(OTHER, logout("macaddr: %s\n", nic_dump(&s->macaddr[0], 6)));
895 break;
896 case CmdConfigure:
897 cpu_physical_memory_read(s->cb_address + 8, &s->configuration[0],
898 sizeof(s->configuration));
899 TRACE(OTHER, logout("configuration: %s\n", nic_dump(&s->configuration[0], 16)));
900 break;
901 case CmdMulticastList:
902 set_multicast_list(s);
903 break;
904 case CmdTx:
905 if (bit_nc) {
906 missing("CmdTx: NC = 0");
907 success = false;
908 break;
909 }
910 tx_command(s);
911 break;
912 case CmdTDR:
913 TRACE(OTHER, logout("load microcode\n"));
914 /* Starting with offset 8, the command contains
915 * 64 dwords microcode which we just ignore here. */
916 break;
917 default:
918 missing("undefined command");
919 success = false;
920 break;
921 }
922 /* Write new status. */
923 stw_phys(s->cb_address, status | 0x8000 | (success ? 0x2000 : 0));
924 if (bit_i) {
925 /* CU completed action. */
926 eepro100_cx_interrupt(s);
927 }
928 if (bit_el) {
929 /* CU becomes idle. Terminate command loop. */
930 set_cu_state(s, cu_idle);
931 eepro100_cna_interrupt(s);
932 break;
933 } else if (bit_s) {
934 /* CU becomes suspended. Terminate command loop. */
935 set_cu_state(s, cu_suspended);
936 eepro100_cna_interrupt(s);
937 break;
938 } else {
939 /* More entries in list. */
940 TRACE(OTHER, logout("CU list with at least one more entry\n"));
941 }
942 }
943 TRACE(OTHER, logout("CU list empty\n"));
944 /* List is empty. Now CU is idle or suspended. */
945 }
946
947 static void eepro100_cu_command(EEPRO100State * s, uint8_t val)
948 {
949 switch (val) {
950 case CU_NOP:
951 /* No operation. */
952 break;
953 case CU_START:
954 if (get_cu_state(s) != cu_idle) {
955 /* Intel documentation says that CU must be idle for the CU
956 * start command. Intel driver for Linux also starts the CU
957 * from suspended state. */
958 logout("CU state is %u, should be %u\n", get_cu_state(s), cu_idle);
959 //~ assert(!"wrong CU state");
960 }
961 set_cu_state(s, cu_active);
962 s->cu_offset = s->pointer;
963 action_command(s);
964 break;
965 case CU_RESUME:
966 if (get_cu_state(s) != cu_suspended) {
967 logout("bad CU resume from CU state %u\n", get_cu_state(s));
968 /* Workaround for bad Linux eepro100 driver which resumes
969 * from idle state. */
970 //~ missing("cu resume");
971 set_cu_state(s, cu_suspended);
972 }
973 if (get_cu_state(s) == cu_suspended) {
974 TRACE(OTHER, logout("CU resuming\n"));
975 set_cu_state(s, cu_active);
976 action_command(s);
977 }
978 break;
979 case CU_STATSADDR:
980 /* Load dump counters address. */
981 s->statsaddr = s->pointer;
982 TRACE(OTHER, logout("val=0x%02x (status address)\n", val));
983 break;
984 case CU_SHOWSTATS:
985 /* Dump statistical counters. */
986 TRACE(OTHER, logout("val=0x%02x (dump stats)\n", val));
987 dump_statistics(s);
988 stl_le_phys(s->statsaddr + s->stats_size, 0xa005);
989 break;
990 case CU_CMD_BASE:
991 /* Load CU base. */
992 TRACE(OTHER, logout("val=0x%02x (CU base address)\n", val));
993 s->cu_base = s->pointer;
994 break;
995 case CU_DUMPSTATS:
996 /* Dump and reset statistical counters. */
997 TRACE(OTHER, logout("val=0x%02x (dump stats and reset)\n", val));
998 dump_statistics(s);
999 stl_le_phys(s->statsaddr + s->stats_size, 0xa007);
1000 memset(&s->statistics, 0, sizeof(s->statistics));
1001 break;
1002 case CU_SRESUME:
1003 /* CU static resume. */
1004 missing("CU static resume");
1005 break;
1006 default:
1007 missing("Undefined CU command");
1008 }
1009 }
1010
1011 static void eepro100_ru_command(EEPRO100State * s, uint8_t val)
1012 {
1013 switch (val) {
1014 case RU_NOP:
1015 /* No operation. */
1016 break;
1017 case RX_START:
1018 /* RU start. */
1019 if (get_ru_state(s) != ru_idle) {
1020 logout("RU state is %u, should be %u\n", get_ru_state(s), ru_idle);
1021 //~ assert(!"wrong RU state");
1022 }
1023 set_ru_state(s, ru_ready);
1024 s->ru_offset = s->pointer;
1025 TRACE(OTHER, logout("val=0x%02x (rx start)\n", val));
1026 break;
1027 case RX_RESUME:
1028 /* Restart RU. */
1029 if (get_ru_state(s) != ru_suspended) {
1030 logout("RU state is %u, should be %u\n", get_ru_state(s),
1031 ru_suspended);
1032 //~ assert(!"wrong RU state");
1033 }
1034 set_ru_state(s, ru_ready);
1035 break;
1036 case RX_ADDR_LOAD:
1037 /* Load RU base. */
1038 TRACE(OTHER, logout("val=0x%02x (RU base address)\n", val));
1039 s->ru_base = s->pointer;
1040 break;
1041 default:
1042 logout("val=0x%02x (undefined RU command)\n", val);
1043 missing("Undefined SU command");
1044 }
1045 }
1046
1047 static void eepro100_write_command(EEPRO100State * s, uint8_t val)
1048 {
1049 eepro100_ru_command(s, val & 0x0f);
1050 eepro100_cu_command(s, val & 0xf0);
1051 if ((val) == 0) {
1052 TRACE(OTHER, logout("val=0x%02x\n", val));
1053 }
1054 /* Clear command byte after command was accepted. */
1055 s->mem[SCBCmd] = 0;
1056 }
1057
1058 /*****************************************************************************
1059 *
1060 * EEPROM emulation.
1061 *
1062 ****************************************************************************/
1063
1064 #define EEPROM_CS 0x02
1065 #define EEPROM_SK 0x01
1066 #define EEPROM_DI 0x04
1067 #define EEPROM_DO 0x08
1068
1069 static uint16_t eepro100_read_eeprom(EEPRO100State * s)
1070 {
1071 uint16_t val;
1072 memcpy(&val, &s->mem[SCBeeprom], sizeof(val));
1073 if (eeprom93xx_read(s->eeprom)) {
1074 val |= EEPROM_DO;
1075 } else {
1076 val &= ~EEPROM_DO;
1077 }
1078 TRACE(EEPROM, logout("val=0x%04x\n", val));
1079 return val;
1080 }
1081
1082 static void eepro100_write_eeprom(eeprom_t * eeprom, uint8_t val)
1083 {
1084 TRACE(EEPROM, logout("val=0x%02x\n", val));
1085
1086 /* mask unwriteable bits */
1087 //~ val = SET_MASKED(val, 0x31, eeprom->value);
1088
1089 int eecs = ((val & EEPROM_CS) != 0);
1090 int eesk = ((val & EEPROM_SK) != 0);
1091 int eedi = ((val & EEPROM_DI) != 0);
1092 eeprom93xx_write(eeprom, eecs, eesk, eedi);
1093 }
1094
1095 static void eepro100_write_pointer(EEPRO100State * s, uint32_t val)
1096 {
1097 s->pointer = le32_to_cpu(val);
1098 TRACE(OTHER, logout("val=0x%08x\n", val));
1099 }
1100
1101 /*****************************************************************************
1102 *
1103 * MDI emulation.
1104 *
1105 ****************************************************************************/
1106
1107 #if defined(DEBUG_EEPRO100)
1108 static const char * const mdi_op_name[] = {
1109 "opcode 0",
1110 "write",
1111 "read",
1112 "opcode 3"
1113 };
1114
1115 static const char * const mdi_reg_name[] = {
1116 "Control",
1117 "Status",
1118 "PHY Identification (Word 1)",
1119 "PHY Identification (Word 2)",
1120 "Auto-Negotiation Advertisement",
1121 "Auto-Negotiation Link Partner Ability",
1122 "Auto-Negotiation Expansion"
1123 };
1124
1125 static const char *reg2name(uint8_t reg)
1126 {
1127 static char buffer[10];
1128 const char *p = buffer;
1129 if (reg < ARRAY_SIZE(mdi_reg_name)) {
1130 p = mdi_reg_name[reg];
1131 } else {
1132 snprintf(buffer, sizeof(buffer), "reg=0x%02x", reg);
1133 }
1134 return p;
1135 }
1136 #endif /* DEBUG_EEPRO100 */
1137
1138 static uint32_t eepro100_read_mdi(EEPRO100State * s)
1139 {
1140 uint32_t val;
1141 memcpy(&val, &s->mem[0x10], sizeof(val));
1142
1143 #ifdef DEBUG_EEPRO100
1144 uint8_t raiseint = (val & BIT(29)) >> 29;
1145 uint8_t opcode = (val & BITS(27, 26)) >> 26;
1146 uint8_t phy = (val & BITS(25, 21)) >> 21;
1147 uint8_t reg = (val & BITS(20, 16)) >> 16;
1148 uint16_t data = (val & BITS(15, 0));
1149 #endif
1150 /* Emulation takes no time to finish MDI transaction. */
1151 val |= BIT(28);
1152 TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
1153 val, raiseint, mdi_op_name[opcode], phy,
1154 reg2name(reg), data));
1155 return val;
1156 }
1157
1158 static void eepro100_write_mdi(EEPRO100State * s, uint32_t val)
1159 {
1160 uint8_t raiseint = (val & BIT(29)) >> 29;
1161 uint8_t opcode = (val & BITS(27, 26)) >> 26;
1162 uint8_t phy = (val & BITS(25, 21)) >> 21;
1163 uint8_t reg = (val & BITS(20, 16)) >> 16;
1164 uint16_t data = (val & BITS(15, 0));
1165 TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
1166 val, raiseint, mdi_op_name[opcode], phy, reg2name(reg), data));
1167 if (phy != 1) {
1168 /* Unsupported PHY address. */
1169 //~ logout("phy must be 1 but is %u\n", phy);
1170 data = 0;
1171 } else if (opcode != 1 && opcode != 2) {
1172 /* Unsupported opcode. */
1173 logout("opcode must be 1 or 2 but is %u\n", opcode);
1174 data = 0;
1175 } else if (reg > 6) {
1176 /* Unsupported register. */
1177 logout("register must be 0...6 but is %u\n", reg);
1178 data = 0;
1179 } else {
1180 TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
1181 val, raiseint, mdi_op_name[opcode], phy,
1182 reg2name(reg), data));
1183 if (opcode == 1) {
1184 /* MDI write */
1185 switch (reg) {
1186 case 0: /* Control Register */
1187 if (data & 0x8000) {
1188 /* Reset status and control registers to default. */
1189 s->mdimem[0] = eepro100_mdi_default[0];
1190 s->mdimem[1] = eepro100_mdi_default[1];
1191 data = s->mdimem[reg];
1192 } else {
1193 /* Restart Auto Configuration = Normal Operation */
1194 data &= ~0x0200;
1195 }
1196 break;
1197 case 1: /* Status Register */
1198 missing("not writable");
1199 data = s->mdimem[reg];
1200 break;
1201 case 2: /* PHY Identification Register (Word 1) */
1202 case 3: /* PHY Identification Register (Word 2) */
1203 missing("not implemented");
1204 break;
1205 case 4: /* Auto-Negotiation Advertisement Register */
1206 case 5: /* Auto-Negotiation Link Partner Ability Register */
1207 break;
1208 case 6: /* Auto-Negotiation Expansion Register */
1209 default:
1210 missing("not implemented");
1211 }
1212 s->mdimem[reg] = data;
1213 } else if (opcode == 2) {
1214 /* MDI read */
1215 switch (reg) {
1216 case 0: /* Control Register */
1217 if (data & 0x8000) {
1218 /* Reset status and control registers to default. */
1219 s->mdimem[0] = eepro100_mdi_default[0];
1220 s->mdimem[1] = eepro100_mdi_default[1];
1221 }
1222 break;
1223 case 1: /* Status Register */
1224 s->mdimem[reg] |= 0x0020;
1225 break;
1226 case 2: /* PHY Identification Register (Word 1) */
1227 case 3: /* PHY Identification Register (Word 2) */
1228 case 4: /* Auto-Negotiation Advertisement Register */
1229 break;
1230 case 5: /* Auto-Negotiation Link Partner Ability Register */
1231 s->mdimem[reg] = 0x41fe;
1232 break;
1233 case 6: /* Auto-Negotiation Expansion Register */
1234 s->mdimem[reg] = 0x0001;
1235 break;
1236 }
1237 data = s->mdimem[reg];
1238 }
1239 /* Emulation takes no time to finish MDI transaction.
1240 * Set MDI bit in SCB status register. */
1241 s->mem[SCBAck] |= 0x08;
1242 val |= BIT(28);
1243 if (raiseint) {
1244 eepro100_mdi_interrupt(s);
1245 }
1246 }
1247 val = (val & 0xffff0000) + data;
1248 memcpy(&s->mem[0x10], &val, sizeof(val));
1249 }
1250
1251 /*****************************************************************************
1252 *
1253 * Port emulation.
1254 *
1255 ****************************************************************************/
1256
1257 #define PORT_SOFTWARE_RESET 0
1258 #define PORT_SELFTEST 1
1259 #define PORT_SELECTIVE_RESET 2
1260 #define PORT_DUMP 3
1261 #define PORT_SELECTION_MASK 3
1262
1263 typedef struct {
1264 uint32_t st_sign; /* Self Test Signature */
1265 uint32_t st_result; /* Self Test Results */
1266 } eepro100_selftest_t;
1267
1268 static uint32_t eepro100_read_port(EEPRO100State * s)
1269 {
1270 return 0;
1271 }
1272
1273 static void eepro100_write_port(EEPRO100State * s, uint32_t val)
1274 {
1275 val = le32_to_cpu(val);
1276 uint32_t address = (val & ~PORT_SELECTION_MASK);
1277 uint8_t selection = (val & PORT_SELECTION_MASK);
1278 switch (selection) {
1279 case PORT_SOFTWARE_RESET:
1280 nic_reset(s);
1281 break;
1282 case PORT_SELFTEST:
1283 TRACE(OTHER, logout("selftest address=0x%08x\n", address));
1284 eepro100_selftest_t data;
1285 cpu_physical_memory_read(address, (uint8_t *) & data, sizeof(data));
1286 data.st_sign = 0xffffffff;
1287 data.st_result = 0;
1288 cpu_physical_memory_write(address, (uint8_t *) & data, sizeof(data));
1289 break;
1290 case PORT_SELECTIVE_RESET:
1291 TRACE(OTHER, logout("selective reset, selftest address=0x%08x\n", address));
1292 nic_selective_reset(s);
1293 break;
1294 default:
1295 logout("val=0x%08x\n", val);
1296 missing("unknown port selection");
1297 }
1298 }
1299
1300 /*****************************************************************************
1301 *
1302 * General hardware emulation.
1303 *
1304 ****************************************************************************/
1305
1306 static uint8_t eepro100_read1(EEPRO100State * s, uint32_t addr)
1307 {
1308 uint8_t val;
1309 if (addr <= sizeof(s->mem) - sizeof(val)) {
1310 memcpy(&val, &s->mem[addr], sizeof(val));
1311 }
1312
1313 switch (addr) {
1314 case SCBStatus:
1315 //~ val = eepro100_read_status(s);
1316 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1317 break;
1318 case SCBAck:
1319 //~ val = eepro100_read_status(s);
1320 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1321 break;
1322 case SCBCmd:
1323 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1324 //~ val = eepro100_read_command(s);
1325 break;
1326 case SCBIntmask:
1327 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1328 break;
1329 case SCBPort + 3:
1330 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1331 break;
1332 case SCBeeprom:
1333 val = eepro100_read_eeprom(s);
1334 break;
1335 case 0x1b: /* PMDR (power management driver register) */
1336 val = 0;
1337 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1338 break;
1339 case 0x1d: /* general status register */
1340 /* 100 Mbps full duplex, valid link */
1341 val = 0x07;
1342 TRACE(OTHER, logout("addr=General Status val=%02x\n", val));
1343 break;
1344 default:
1345 logout("addr=%s val=0x%02x\n", regname(addr), val);
1346 missing("unknown byte read");
1347 }
1348 return val;
1349 }
1350
1351 static uint16_t eepro100_read2(EEPRO100State * s, uint32_t addr)
1352 {
1353 uint16_t val;
1354 if (addr <= sizeof(s->mem) - sizeof(val)) {
1355 memcpy(&val, &s->mem[addr], sizeof(val));
1356 }
1357
1358 switch (addr) {
1359 case SCBStatus:
1360 //~ val = eepro100_read_status(s);
1361 case SCBCmd:
1362 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1363 break;
1364 case SCBeeprom:
1365 val = eepro100_read_eeprom(s);
1366 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1367 break;
1368 default:
1369 logout("addr=%s val=0x%04x\n", regname(addr), val);
1370 missing("unknown word read");
1371 }
1372 return val;
1373 }
1374
1375 static uint32_t eepro100_read4(EEPRO100State * s, uint32_t addr)
1376 {
1377 uint32_t val;
1378 if (addr <= sizeof(s->mem) - sizeof(val)) {
1379 memcpy(&val, &s->mem[addr], sizeof(val));
1380 }
1381
1382 switch (addr) {
1383 case SCBStatus:
1384 //~ val = eepro100_read_status(s);
1385 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1386 break;
1387 case SCBPointer:
1388 //~ val = eepro100_read_pointer(s);
1389 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1390 break;
1391 case SCBPort:
1392 val = eepro100_read_port(s);
1393 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1394 break;
1395 case SCBCtrlMDI:
1396 val = eepro100_read_mdi(s);
1397 break;
1398 default:
1399 logout("addr=%s val=0x%08x\n", regname(addr), val);
1400 missing("unknown longword read");
1401 }
1402 return val;
1403 }
1404
1405 static void eepro100_write1(EEPRO100State * s, uint32_t addr, uint8_t val)
1406 {
1407 if (addr <= sizeof(s->mem) - sizeof(val)) {
1408 memcpy(&s->mem[addr], &val, sizeof(val));
1409 }
1410
1411 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1412
1413 switch (addr) {
1414 case SCBStatus:
1415 //~ eepro100_write_status(s, val);
1416 break;
1417 case SCBAck:
1418 eepro100_acknowledge(s);
1419 break;
1420 case SCBCmd:
1421 eepro100_write_command(s, val);
1422 break;
1423 case SCBIntmask:
1424 if (val & BIT(1)) {
1425 eepro100_swi_interrupt(s);
1426 }
1427 eepro100_interrupt(s, 0);
1428 break;
1429 case SCBPort + 3:
1430 case SCBFlow: /* does not exist on 82557 */
1431 case SCBFlow + 1:
1432 case SCBFlow + 2:
1433 case SCBFlow + 3:
1434 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1435 break;
1436 case SCBeeprom:
1437 eepro100_write_eeprom(s->eeprom, val);
1438 break;
1439 default:
1440 logout("addr=%s val=0x%02x\n", regname(addr), val);
1441 missing("unknown byte write");
1442 }
1443 }
1444
1445 static void eepro100_write2(EEPRO100State * s, uint32_t addr, uint16_t val)
1446 {
1447 if (addr <= sizeof(s->mem) - sizeof(val)) {
1448 memcpy(&s->mem[addr], &val, sizeof(val));
1449 }
1450
1451 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1452
1453 switch (addr) {
1454 case SCBStatus:
1455 //~ eepro100_write_status(s, val);
1456 eepro100_acknowledge(s);
1457 break;
1458 case SCBCmd:
1459 eepro100_write_command(s, val);
1460 eepro100_write1(s, SCBIntmask, val >> 8);
1461 break;
1462 case SCBeeprom:
1463 eepro100_write_eeprom(s->eeprom, val);
1464 break;
1465 default:
1466 logout("addr=%s val=0x%04x\n", regname(addr), val);
1467 missing("unknown word write");
1468 }
1469 }
1470
1471 static void eepro100_write4(EEPRO100State * s, uint32_t addr, uint32_t val)
1472 {
1473 if (addr <= sizeof(s->mem) - sizeof(val)) {
1474 memcpy(&s->mem[addr], &val, sizeof(val));
1475 }
1476
1477 switch (addr) {
1478 case SCBPointer:
1479 eepro100_write_pointer(s, val);
1480 break;
1481 case SCBPort:
1482 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1483 eepro100_write_port(s, val);
1484 break;
1485 case SCBCtrlMDI:
1486 eepro100_write_mdi(s, val);
1487 break;
1488 default:
1489 logout("addr=%s val=0x%08x\n", regname(addr), val);
1490 missing("unknown longword write");
1491 }
1492 }
1493
1494 /*****************************************************************************
1495 *
1496 * Port mapped I/O.
1497 *
1498 ****************************************************************************/
1499
1500 static uint32_t ioport_read1(void *opaque, uint32_t addr)
1501 {
1502 EEPRO100State *s = opaque;
1503 //~ logout("addr=%s\n", regname(addr));
1504 return eepro100_read1(s, addr - s->region[1]);
1505 }
1506
1507 static uint32_t ioport_read2(void *opaque, uint32_t addr)
1508 {
1509 EEPRO100State *s = opaque;
1510 return eepro100_read2(s, addr - s->region[1]);
1511 }
1512
1513 static uint32_t ioport_read4(void *opaque, uint32_t addr)
1514 {
1515 EEPRO100State *s = opaque;
1516 return eepro100_read4(s, addr - s->region[1]);
1517 }
1518
1519 static void ioport_write1(void *opaque, uint32_t addr, uint32_t val)
1520 {
1521 EEPRO100State *s = opaque;
1522 //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
1523 eepro100_write1(s, addr - s->region[1], val);
1524 }
1525
1526 static void ioport_write2(void *opaque, uint32_t addr, uint32_t val)
1527 {
1528 EEPRO100State *s = opaque;
1529 eepro100_write2(s, addr - s->region[1], val);
1530 }
1531
1532 static void ioport_write4(void *opaque, uint32_t addr, uint32_t val)
1533 {
1534 EEPRO100State *s = opaque;
1535 eepro100_write4(s, addr - s->region[1], val);
1536 }
1537
1538 /***********************************************************/
1539 /* PCI EEPRO100 definitions */
1540
1541 static void pci_map(PCIDevice * pci_dev, int region_num,
1542 pcibus_t addr, pcibus_t size, int type)
1543 {
1544 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1545
1546 TRACE(OTHER, logout("region %d, addr=0x%08"FMT_PCIBUS", "
1547 "size=0x%08"FMT_PCIBUS", type=%d\n",
1548 region_num, addr, size, type));
1549
1550 assert(region_num == 1);
1551 register_ioport_write(addr, size, 1, ioport_write1, s);
1552 register_ioport_read(addr, size, 1, ioport_read1, s);
1553 register_ioport_write(addr, size, 2, ioport_write2, s);
1554 register_ioport_read(addr, size, 2, ioport_read2, s);
1555 register_ioport_write(addr, size, 4, ioport_write4, s);
1556 register_ioport_read(addr, size, 4, ioport_read4, s);
1557
1558 s->region[region_num] = addr;
1559 }
1560
1561 /*****************************************************************************
1562 *
1563 * Memory mapped I/O.
1564 *
1565 ****************************************************************************/
1566
1567 static void pci_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
1568 {
1569 EEPRO100State *s = opaque;
1570 //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
1571 eepro100_write1(s, addr, val);
1572 }
1573
1574 static void pci_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
1575 {
1576 EEPRO100State *s = opaque;
1577 //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
1578 eepro100_write2(s, addr, val);
1579 }
1580
1581 static void pci_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
1582 {
1583 EEPRO100State *s = opaque;
1584 //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
1585 eepro100_write4(s, addr, val);
1586 }
1587
1588 static uint32_t pci_mmio_readb(void *opaque, target_phys_addr_t addr)
1589 {
1590 EEPRO100State *s = opaque;
1591 //~ logout("addr=%s\n", regname(addr));
1592 return eepro100_read1(s, addr);
1593 }
1594
1595 static uint32_t pci_mmio_readw(void *opaque, target_phys_addr_t addr)
1596 {
1597 EEPRO100State *s = opaque;
1598 //~ logout("addr=%s\n", regname(addr));
1599 return eepro100_read2(s, addr);
1600 }
1601
1602 static uint32_t pci_mmio_readl(void *opaque, target_phys_addr_t addr)
1603 {
1604 EEPRO100State *s = opaque;
1605 //~ logout("addr=%s\n", regname(addr));
1606 return eepro100_read4(s, addr);
1607 }
1608
1609 static CPUWriteMemoryFunc * const pci_mmio_write[] = {
1610 pci_mmio_writeb,
1611 pci_mmio_writew,
1612 pci_mmio_writel
1613 };
1614
1615 static CPUReadMemoryFunc * const pci_mmio_read[] = {
1616 pci_mmio_readb,
1617 pci_mmio_readw,
1618 pci_mmio_readl
1619 };
1620
1621 static void pci_mmio_map(PCIDevice * pci_dev, int region_num,
1622 pcibus_t addr, pcibus_t size, int type)
1623 {
1624 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1625
1626 TRACE(OTHER, logout("region %d, addr=0x%08"FMT_PCIBUS", "
1627 "size=0x%08"FMT_PCIBUS", type=%d\n",
1628 region_num, addr, size, type));
1629
1630 if (region_num == 0) {
1631 /* Map control / status registers. */
1632 cpu_register_physical_memory(addr, size, s->mmio_index);
1633 s->region[region_num] = addr;
1634 }
1635 }
1636
1637 static int nic_can_receive(VLANClientState *nc)
1638 {
1639 EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
1640 TRACE(RXTX, logout("%p\n", s));
1641 return get_ru_state(s) == ru_ready;
1642 //~ return !eepro100_buffer_full(s);
1643 }
1644
1645 static ssize_t nic_receive(VLANClientState *nc, const uint8_t * buf, size_t size)
1646 {
1647 /* TODO:
1648 * - Magic packets should set bit 30 in power management driver register.
1649 * - Interesting packets should set bit 29 in power management driver register.
1650 */
1651 EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
1652 uint16_t rfd_status = 0xa000;
1653 static const uint8_t broadcast_macaddr[6] =
1654 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
1655
1656 /* TODO: check multiple IA bit. */
1657 if (s->configuration[20] & BIT(6)) {
1658 missing("Multiple IA bit");
1659 return -1;
1660 }
1661
1662 if (s->configuration[8] & 0x80) {
1663 /* CSMA is disabled. */
1664 logout("%p received while CSMA is disabled\n", s);
1665 return -1;
1666 } else if (size < 64 && (s->configuration[7] & 1)) {
1667 /* Short frame and configuration byte 7/0 (discard short receive) set:
1668 * Short frame is discarded */
1669 logout("%p received short frame (%zu byte)\n", s, size);
1670 s->statistics.rx_short_frame_errors++;
1671 //~ return -1;
1672 } else if ((size > MAX_ETH_FRAME_SIZE + 4) && !(s->configuration[18] & 8)) {
1673 /* Long frame and configuration byte 18/3 (long receive ok) not set:
1674 * Long frames are discarded. */
1675 logout("%p received long frame (%zu byte), ignored\n", s, size);
1676 return -1;
1677 } else if (memcmp(buf, s->conf.macaddr.a, 6) == 0) { // !!!
1678 /* Frame matches individual address. */
1679 /* TODO: check configuration byte 15/4 (ignore U/L). */
1680 TRACE(RXTX, logout("%p received frame for me, len=%zu\n", s, size));
1681 } else if (memcmp(buf, broadcast_macaddr, 6) == 0) {
1682 /* Broadcast frame. */
1683 TRACE(RXTX, logout("%p received broadcast, len=%zu\n", s, size));
1684 rfd_status |= 0x0002;
1685 } else if (buf[0] & 0x01) {
1686 /* Multicast frame. */
1687 TRACE(RXTX, logout("%p received multicast, len=%zu,%s\n", s, size, nic_dump(buf, size)));
1688 if (s->configuration[21] & BIT(3)) {
1689 /* Multicast all bit is set, receive all multicast frames. */
1690 } else {
1691 unsigned mcast_idx = compute_mcast_idx(buf);
1692 assert(mcast_idx < 64);
1693 if (s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7))) {
1694 /* Multicast frame is allowed in hash table. */
1695 } else if (s->configuration[15] & 1) {
1696 /* Promiscuous: receive all. */
1697 rfd_status |= 0x0004;
1698 } else {
1699 TRACE(RXTX, logout("%p multicast ignored\n", s));
1700 return -1;
1701 }
1702 }
1703 /* TODO: Next not for promiscuous mode? */
1704 rfd_status |= 0x0002;
1705 } else if (s->configuration[15] & 1) {
1706 /* Promiscuous: receive all. */
1707 TRACE(RXTX, logout("%p received frame in promiscuous mode, len=%zu\n", s, size));
1708 rfd_status |= 0x0004;
1709 } else {
1710 TRACE(RXTX, logout("%p received frame, ignored, len=%zu,%s\n", s, size,
1711 nic_dump(buf, size)));
1712 return size;
1713 }
1714
1715 if (get_ru_state(s) != ru_ready) {
1716 /* No resources available. */
1717 logout("no resources, state=%u\n", get_ru_state(s));
1718 s->statistics.rx_resource_errors++;
1719 //~ assert(!"no resources");
1720 return -1;
1721 }
1722 //~ !!!
1723 //~ $3 = {status = 0x0, command = 0xc000, link = 0x2d220, rx_buf_addr = 0x207dc, count = 0x0, size = 0x5f8, packet = {0x0 <repeats 1518 times>}}
1724 eepro100_rx_t rx;
1725 cpu_physical_memory_read(s->ru_base + s->ru_offset, (uint8_t *) & rx,
1726 offsetof(eepro100_rx_t, packet));
1727 uint16_t rfd_command = le16_to_cpu(rx.command);
1728 uint16_t rfd_size = le16_to_cpu(rx.size);
1729
1730 if (size > rfd_size) {
1731 logout("Receive buffer (%" PRId16 " bytes) too small for data "
1732 "(%zu bytes); data truncated\n", rfd_size, size);
1733 size = rfd_size;
1734 }
1735 if (size < 64) {
1736 rfd_status |= 0x0080;
1737 }
1738 TRACE(OTHER, logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n",
1739 rfd_command, rx.link, rx.rx_buf_addr, rfd_size));
1740 stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
1741 rfd_status);
1742 stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
1743 /* Early receive interrupt not supported. */
1744 //~ eepro100_er_interrupt(s);
1745 /* Receive CRC Transfer not supported. */
1746 if (s->configuration[18] & 4) {
1747 missing("Receive CRC Transfer");
1748 return -1;
1749 }
1750 /* TODO: check stripping enable bit. */
1751 //~ assert(!(s->configuration[17] & 1));
1752 cpu_physical_memory_write(s->ru_base + s->ru_offset +
1753 offsetof(eepro100_rx_t, packet), buf, size);
1754 s->statistics.rx_good_frames++;
1755 eepro100_fr_interrupt(s);
1756 s->ru_offset = le32_to_cpu(rx.link);
1757 if (rfd_command & 0x8000) {
1758 /* EL bit is set, so this was the last frame. */
1759 logout("receive: Running out of frames\n");
1760 set_ru_state(s, ru_suspended);
1761 }
1762 if (rfd_command & 0x4000) {
1763 /* S bit is set. */
1764 set_ru_state(s, ru_suspended);
1765 }
1766 return size;
1767 }
1768
1769 static const VMStateDescription vmstate_eepro100 = {
1770 .version_id = 3,
1771 .minimum_version_id = 2,
1772 .minimum_version_id_old = 2,
1773 .fields = (VMStateField []) {
1774 VMSTATE_PCI_DEVICE(dev, EEPRO100State),
1775 VMSTATE_UNUSED(32),
1776 VMSTATE_BUFFER(mult, EEPRO100State),
1777 VMSTATE_BUFFER(mem, EEPRO100State),
1778 /* Save all members of struct between scb_stat and mem. */
1779 VMSTATE_UINT8(scb_stat, EEPRO100State),
1780 VMSTATE_UINT8(int_stat, EEPRO100State),
1781 VMSTATE_UNUSED(3*4),
1782 VMSTATE_MACADDR(conf.macaddr, EEPRO100State),
1783 VMSTATE_UNUSED(19*4),
1784 VMSTATE_UINT16_ARRAY(mdimem, EEPRO100State, 32),
1785 /* The eeprom should be saved and restored by its own routines. */
1786 VMSTATE_UINT32(device, EEPRO100State),
1787 /* TODO check device. */
1788 VMSTATE_UINT32(pointer, EEPRO100State),
1789 VMSTATE_UINT32(cu_base, EEPRO100State),
1790 VMSTATE_UINT32(cu_offset, EEPRO100State),
1791 VMSTATE_UINT32(ru_base, EEPRO100State),
1792 VMSTATE_UINT32(ru_offset, EEPRO100State),
1793 VMSTATE_UINT32(statsaddr, EEPRO100State),
1794 /* Save eepro100_stats_t statistics. */
1795 VMSTATE_UINT32(statistics.tx_good_frames, EEPRO100State),
1796 VMSTATE_UINT32(statistics.tx_max_collisions, EEPRO100State),
1797 VMSTATE_UINT32(statistics.tx_late_collisions, EEPRO100State),
1798 VMSTATE_UINT32(statistics.tx_underruns, EEPRO100State),
1799 VMSTATE_UINT32(statistics.tx_lost_crs, EEPRO100State),
1800 VMSTATE_UINT32(statistics.tx_deferred, EEPRO100State),
1801 VMSTATE_UINT32(statistics.tx_single_collisions, EEPRO100State),
1802 VMSTATE_UINT32(statistics.tx_multiple_collisions, EEPRO100State),
1803 VMSTATE_UINT32(statistics.tx_total_collisions, EEPRO100State),
1804 VMSTATE_UINT32(statistics.rx_good_frames, EEPRO100State),
1805 VMSTATE_UINT32(statistics.rx_crc_errors, EEPRO100State),
1806 VMSTATE_UINT32(statistics.rx_alignment_errors, EEPRO100State),
1807 VMSTATE_UINT32(statistics.rx_resource_errors, EEPRO100State),
1808 VMSTATE_UINT32(statistics.rx_overrun_errors, EEPRO100State),
1809 VMSTATE_UINT32(statistics.rx_cdt_errors, EEPRO100State),
1810 VMSTATE_UINT32(statistics.rx_short_frame_errors, EEPRO100State),
1811 VMSTATE_UINT32(statistics.fc_xmt_pause, EEPRO100State),
1812 VMSTATE_UINT32(statistics.fc_rcv_pause, EEPRO100State),
1813 VMSTATE_UINT32(statistics.fc_rcv_unsupported, EEPRO100State),
1814 VMSTATE_UINT16(statistics.xmt_tco_frames, EEPRO100State),
1815 VMSTATE_UINT16(statistics.rcv_tco_frames, EEPRO100State),
1816 #if 0
1817 VMSTATE_UINT16(status, EEPRO100State),
1818 #endif
1819 /* Configuration bytes. */
1820 VMSTATE_BUFFER(configuration, EEPRO100State),
1821 VMSTATE_END_OF_LIST()
1822 }
1823 };
1824
1825 static void nic_cleanup(VLANClientState *nc)
1826 {
1827 EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
1828
1829 s->nic = NULL;
1830 }
1831
1832 static int pci_nic_uninit(PCIDevice *pci_dev)
1833 {
1834 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1835
1836 cpu_unregister_io_memory(s->mmio_index);
1837 vmstate_unregister(s->vmstate, s);
1838 eeprom93xx_free(s->eeprom);
1839 qemu_del_vlan_client(&s->nic->nc);
1840 return 0;
1841 }
1842
1843 static NetClientInfo net_eepro100_info = {
1844 .type = NET_CLIENT_TYPE_NIC,
1845 .size = sizeof(NICState),
1846 .can_receive = nic_can_receive,
1847 .receive = nic_receive,
1848 .cleanup = nic_cleanup,
1849 };
1850
1851 static int nic_init(PCIDevice *pci_dev, uint32_t device)
1852 {
1853 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1854
1855 TRACE(OTHER, logout("\n"));
1856
1857 s->device = device;
1858
1859 pci_reset(s);
1860
1861 /* Add 64 * 2 EEPROM. i82557 and i82558 support a 64 word EEPROM,
1862 * i82559 and later support 64 or 256 word EEPROM. */
1863 s->eeprom = eeprom93xx_new(EEPROM_SIZE);
1864
1865 /* Handler for memory-mapped I/O */
1866 s->mmio_index =
1867 cpu_register_io_memory(pci_mmio_read, pci_mmio_write, s);
1868
1869 pci_register_bar(&s->dev, 0, PCI_MEM_SIZE,
1870 PCI_BASE_ADDRESS_SPACE_MEMORY |
1871 PCI_BASE_ADDRESS_MEM_PREFETCH, pci_mmio_map);
1872 pci_register_bar(&s->dev, 1, PCI_IO_SIZE, PCI_BASE_ADDRESS_SPACE_IO,
1873 pci_map);
1874 pci_register_bar(&s->dev, 2, PCI_FLASH_SIZE, PCI_BASE_ADDRESS_SPACE_MEMORY,
1875 pci_mmio_map);
1876
1877 qemu_macaddr_default_if_unset(&s->conf.macaddr);
1878 logout("macaddr: %s\n", nic_dump(&s->macaddr[0], 6));
1879 assert(s->region[1] == 0);
1880
1881 nic_reset(s);
1882
1883 s->nic = qemu_new_nic(&net_eepro100_info, &s->conf,
1884 pci_dev->qdev.info->name, pci_dev->qdev.id, s);
1885
1886 qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a);
1887 TRACE(OTHER, logout("%s\n", s->nic->nc.info_str));
1888
1889 qemu_register_reset(nic_reset, s);
1890
1891 s->vmstate = qemu_malloc(sizeof(vmstate_eepro100));
1892 memcpy(s->vmstate, &vmstate_eepro100, sizeof(vmstate_eepro100));
1893 s->vmstate->name = s->nic->nc.model;
1894 vmstate_register(-1, s->vmstate, s);
1895
1896 return 0;
1897 }
1898
1899 static int pci_i82550_init(PCIDevice *pci_dev)
1900 {
1901 return nic_init(pci_dev, i82550);
1902 }
1903
1904 static int pci_i82551_init(PCIDevice *pci_dev)
1905 {
1906 return nic_init(pci_dev, i82551);
1907 }
1908
1909 static int pci_i82557a_init(PCIDevice *pci_dev)
1910 {
1911 return nic_init(pci_dev, i82557A);
1912 }
1913
1914 static int pci_i82557b_init(PCIDevice *pci_dev)
1915 {
1916 return nic_init(pci_dev, i82557B);
1917 }
1918
1919 static int pci_i82557c_init(PCIDevice *pci_dev)
1920 {
1921 return nic_init(pci_dev, i82557C);
1922 }
1923
1924 static int pci_i82558a_init(PCIDevice *pci_dev)
1925 {
1926 return nic_init(pci_dev, i82558A);
1927 }
1928
1929 static int pci_i82558b_init(PCIDevice *pci_dev)
1930 {
1931 return nic_init(pci_dev, i82558B);
1932 }
1933
1934 static int pci_i82559a_init(PCIDevice *pci_dev)
1935 {
1936 return nic_init(pci_dev, i82559A);
1937 }
1938
1939 static int pci_i82559b_init(PCIDevice *pci_dev)
1940 {
1941 return nic_init(pci_dev, i82559B);
1942 }
1943
1944 static int pci_i82559c_init(PCIDevice *pci_dev)
1945 {
1946 return nic_init(pci_dev, i82559C);
1947 }
1948
1949 static int pci_i82559er_init(PCIDevice *pci_dev)
1950 {
1951 return nic_init(pci_dev, i82559ER);
1952 }
1953
1954 static int pci_i82562_init(PCIDevice *pci_dev)
1955 {
1956 return nic_init(pci_dev, i82562);
1957 }
1958
1959 static PCIDeviceInfo eepro100_info[] = {
1960 {
1961 .qdev.name = "i82550",
1962 .qdev.size = sizeof(EEPRO100State),
1963 .init = pci_i82550_init,
1964 .exit = pci_nic_uninit,
1965 .qdev.props = (Property[]) {
1966 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
1967 DEFINE_PROP_END_OF_LIST(),
1968 },
1969 },{
1970 .qdev.name = "i82551",
1971 .qdev.size = sizeof(EEPRO100State),
1972 .init = pci_i82551_init,
1973 .exit = pci_nic_uninit,
1974 .qdev.props = (Property[]) {
1975 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
1976 DEFINE_PROP_END_OF_LIST(),
1977 },
1978 },{
1979 .qdev.name = "i82557a",
1980 .qdev.size = sizeof(EEPRO100State),
1981 .init = pci_i82557a_init,
1982 .exit = pci_nic_uninit,
1983 .qdev.props = (Property[]) {
1984 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
1985 DEFINE_PROP_END_OF_LIST(),
1986 },
1987 },{
1988 .qdev.name = "i82557b",
1989 .qdev.size = sizeof(EEPRO100State),
1990 .init = pci_i82557b_init,
1991 .exit = pci_nic_uninit,
1992 .qdev.props = (Property[]) {
1993 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
1994 DEFINE_PROP_END_OF_LIST(),
1995 },
1996 },{
1997 .qdev.name = "i82557c",
1998 .qdev.size = sizeof(EEPRO100State),
1999 .init = pci_i82557c_init,
2000 .exit = pci_nic_uninit,
2001 .qdev.props = (Property[]) {
2002 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2003 DEFINE_PROP_END_OF_LIST(),
2004 },
2005 },{
2006 .qdev.name = "i82558a",
2007 .qdev.size = sizeof(EEPRO100State),
2008 .init = pci_i82558a_init,
2009 .exit = pci_nic_uninit,
2010 .qdev.props = (Property[]) {
2011 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2012 DEFINE_PROP_END_OF_LIST(),
2013 },
2014 },{
2015 .qdev.name = "i82558b",
2016 .qdev.size = sizeof(EEPRO100State),
2017 .init = pci_i82558b_init,
2018 .exit = pci_nic_uninit,
2019 .qdev.props = (Property[]) {
2020 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2021 DEFINE_PROP_END_OF_LIST(),
2022 },
2023 },{
2024 .qdev.name = "i82559a",
2025 .qdev.size = sizeof(EEPRO100State),
2026 .init = pci_i82559a_init,
2027 .exit = pci_nic_uninit,
2028 .qdev.props = (Property[]) {
2029 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2030 DEFINE_PROP_END_OF_LIST(),
2031 },
2032 },{
2033 .qdev.name = "i82559b",
2034 .qdev.size = sizeof(EEPRO100State),
2035 .init = pci_i82559b_init,
2036 .exit = pci_nic_uninit,
2037 .qdev.props = (Property[]) {
2038 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2039 DEFINE_PROP_END_OF_LIST(),
2040 },
2041 },{
2042 .qdev.name = "i82559c",
2043 .qdev.size = sizeof(EEPRO100State),
2044 .init = pci_i82559c_init,
2045 .exit = pci_nic_uninit,
2046 .qdev.props = (Property[]) {
2047 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2048 DEFINE_PROP_END_OF_LIST(),
2049 },
2050 },{
2051 .qdev.name = "i82559er",
2052 .qdev.size = sizeof(EEPRO100State),
2053 .init = pci_i82559er_init,
2054 .exit = pci_nic_uninit,
2055 .romfile = "pxe-i82559er.bin",
2056 .qdev.props = (Property[]) {
2057 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2058 DEFINE_PROP_END_OF_LIST(),
2059 },
2060 },{
2061 .qdev.name = "i82562",
2062 .qdev.size = sizeof(EEPRO100State),
2063 .init = pci_i82562_init,
2064 .exit = pci_nic_uninit,
2065 .qdev.props = (Property[]) {
2066 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2067 DEFINE_PROP_END_OF_LIST(),
2068 },
2069 },{
2070 /* end of list */
2071 }
2072 };
2073
2074 static void eepro100_register_devices(void)
2075 {
2076 pci_qdev_register_many(eepro100_info);
2077 }
2078
2079 device_init(eepro100_register_devices)
Qemu with PowerPC KVM improvements