openpic: export e500 epr enable into a ppc.c function
[qemu/agraf.git] / hw / sparc32_dma.c
blob6d0df51749c7e9505ceebffd78583d5d20faa7fd
1 /*
2 * QEMU Sparc32 DMA controller emulation
4 * Copyright (c) 2006 Fabrice Bellard
6 * Modifications:
7 * 2010-Feb-14 Artyom Tarasenko : reworked irq generation
9 * Permission is hereby granted, free of charge, to any person obtaining a copy
10 * of this software and associated documentation files (the "Software"), to deal
11 * in the Software without restriction, including without limitation the rights
12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
13 * copies of the Software, and to permit persons to whom the Software is
14 * furnished to do so, subject to the following conditions:
16 * The above copyright notice and this permission notice shall be included in
17 * all copies or substantial portions of the Software.
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 * THE SOFTWARE.
28 #include "hw.h"
29 #include "sparc32_dma.h"
30 #include "sun4m.h"
31 #include "sysbus.h"
32 #include "trace.h"
35 * This is the DMA controller part of chip STP2000 (Master I/O), also
36 * produced as NCR89C100. See
37 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
38 * and
39 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/DMA2.txt
42 #define DMA_REGS 4
43 #define DMA_SIZE (4 * sizeof(uint32_t))
44 /* We need the mask, because one instance of the device is not page
45 aligned (ledma, start address 0x0010) */
46 #define DMA_MASK (DMA_SIZE - 1)
47 /* OBP says 0x20 bytes for ledma, the extras are aliased to espdma */
48 #define DMA_ETH_SIZE (8 * sizeof(uint32_t))
49 #define DMA_MAX_REG_OFFSET (2 * DMA_SIZE - 1)
51 #define DMA_VER 0xa0000000
52 #define DMA_INTR 1
53 #define DMA_INTREN 0x10
54 #define DMA_WRITE_MEM 0x100
55 #define DMA_EN 0x200
56 #define DMA_LOADED 0x04000000
57 #define DMA_DRAIN_FIFO 0x40
58 #define DMA_RESET 0x80
60 /* XXX SCSI and ethernet should have different read-only bit masks */
61 #define DMA_CSR_RO_MASK 0xfe000007
63 typedef struct DMAState DMAState;
65 struct DMAState {
66 SysBusDevice busdev;
67 MemoryRegion iomem;
68 uint32_t dmaregs[DMA_REGS];
69 qemu_irq irq;
70 void *iommu;
71 qemu_irq gpio[2];
72 uint32_t is_ledma;
75 enum {
76 GPIO_RESET = 0,
77 GPIO_DMA,
80 /* Note: on sparc, the lance 16 bit bus is swapped */
81 void ledma_memory_read(void *opaque, hwaddr addr,
82 uint8_t *buf, int len, int do_bswap)
84 DMAState *s = opaque;
85 int i;
87 addr |= s->dmaregs[3];
88 trace_ledma_memory_read(addr);
89 if (do_bswap) {
90 sparc_iommu_memory_read(s->iommu, addr, buf, len);
91 } else {
92 addr &= ~1;
93 len &= ~1;
94 sparc_iommu_memory_read(s->iommu, addr, buf, len);
95 for(i = 0; i < len; i += 2) {
96 bswap16s((uint16_t *)(buf + i));
101 void ledma_memory_write(void *opaque, hwaddr addr,
102 uint8_t *buf, int len, int do_bswap)
104 DMAState *s = opaque;
105 int l, i;
106 uint16_t tmp_buf[32];
108 addr |= s->dmaregs[3];
109 trace_ledma_memory_write(addr);
110 if (do_bswap) {
111 sparc_iommu_memory_write(s->iommu, addr, buf, len);
112 } else {
113 addr &= ~1;
114 len &= ~1;
115 while (len > 0) {
116 l = len;
117 if (l > sizeof(tmp_buf))
118 l = sizeof(tmp_buf);
119 for(i = 0; i < l; i += 2) {
120 tmp_buf[i >> 1] = bswap16(*(uint16_t *)(buf + i));
122 sparc_iommu_memory_write(s->iommu, addr, (uint8_t *)tmp_buf, l);
123 len -= l;
124 buf += l;
125 addr += l;
130 static void dma_set_irq(void *opaque, int irq, int level)
132 DMAState *s = opaque;
133 if (level) {
134 s->dmaregs[0] |= DMA_INTR;
135 if (s->dmaregs[0] & DMA_INTREN) {
136 trace_sparc32_dma_set_irq_raise();
137 qemu_irq_raise(s->irq);
139 } else {
140 if (s->dmaregs[0] & DMA_INTR) {
141 s->dmaregs[0] &= ~DMA_INTR;
142 if (s->dmaregs[0] & DMA_INTREN) {
143 trace_sparc32_dma_set_irq_lower();
144 qemu_irq_lower(s->irq);
150 void espdma_memory_read(void *opaque, uint8_t *buf, int len)
152 DMAState *s = opaque;
154 trace_espdma_memory_read(s->dmaregs[1]);
155 sparc_iommu_memory_read(s->iommu, s->dmaregs[1], buf, len);
156 s->dmaregs[1] += len;
159 void espdma_memory_write(void *opaque, uint8_t *buf, int len)
161 DMAState *s = opaque;
163 trace_espdma_memory_write(s->dmaregs[1]);
164 sparc_iommu_memory_write(s->iommu, s->dmaregs[1], buf, len);
165 s->dmaregs[1] += len;
168 static uint64_t dma_mem_read(void *opaque, hwaddr addr,
169 unsigned size)
171 DMAState *s = opaque;
172 uint32_t saddr;
174 if (s->is_ledma && (addr > DMA_MAX_REG_OFFSET)) {
175 /* aliased to espdma, but we can't get there from here */
176 /* buggy driver if using undocumented behavior, just return 0 */
177 trace_sparc32_dma_mem_readl(addr, 0);
178 return 0;
180 saddr = (addr & DMA_MASK) >> 2;
181 trace_sparc32_dma_mem_readl(addr, s->dmaregs[saddr]);
182 return s->dmaregs[saddr];
185 static void dma_mem_write(void *opaque, hwaddr addr,
186 uint64_t val, unsigned size)
188 DMAState *s = opaque;
189 uint32_t saddr;
191 if (s->is_ledma && (addr > DMA_MAX_REG_OFFSET)) {
192 /* aliased to espdma, but we can't get there from here */
193 trace_sparc32_dma_mem_writel(addr, 0, val);
194 return;
196 saddr = (addr & DMA_MASK) >> 2;
197 trace_sparc32_dma_mem_writel(addr, s->dmaregs[saddr], val);
198 switch (saddr) {
199 case 0:
200 if (val & DMA_INTREN) {
201 if (s->dmaregs[0] & DMA_INTR) {
202 trace_sparc32_dma_set_irq_raise();
203 qemu_irq_raise(s->irq);
205 } else {
206 if (s->dmaregs[0] & (DMA_INTR | DMA_INTREN)) {
207 trace_sparc32_dma_set_irq_lower();
208 qemu_irq_lower(s->irq);
211 if (val & DMA_RESET) {
212 qemu_irq_raise(s->gpio[GPIO_RESET]);
213 qemu_irq_lower(s->gpio[GPIO_RESET]);
214 } else if (val & DMA_DRAIN_FIFO) {
215 val &= ~DMA_DRAIN_FIFO;
216 } else if (val == 0)
217 val = DMA_DRAIN_FIFO;
219 if (val & DMA_EN && !(s->dmaregs[0] & DMA_EN)) {
220 trace_sparc32_dma_enable_raise();
221 qemu_irq_raise(s->gpio[GPIO_DMA]);
222 } else if (!(val & DMA_EN) && !!(s->dmaregs[0] & DMA_EN)) {
223 trace_sparc32_dma_enable_lower();
224 qemu_irq_lower(s->gpio[GPIO_DMA]);
227 val &= ~DMA_CSR_RO_MASK;
228 val |= DMA_VER;
229 s->dmaregs[0] = (s->dmaregs[0] & DMA_CSR_RO_MASK) | val;
230 break;
231 case 1:
232 s->dmaregs[0] |= DMA_LOADED;
233 /* fall through */
234 default:
235 s->dmaregs[saddr] = val;
236 break;
240 static const MemoryRegionOps dma_mem_ops = {
241 .read = dma_mem_read,
242 .write = dma_mem_write,
243 .endianness = DEVICE_NATIVE_ENDIAN,
244 .valid = {
245 .min_access_size = 4,
246 .max_access_size = 4,
250 static void dma_reset(DeviceState *d)
252 DMAState *s = container_of(d, DMAState, busdev.qdev);
254 memset(s->dmaregs, 0, DMA_SIZE);
255 s->dmaregs[0] = DMA_VER;
258 static const VMStateDescription vmstate_dma = {
259 .name ="sparc32_dma",
260 .version_id = 2,
261 .minimum_version_id = 2,
262 .minimum_version_id_old = 2,
263 .fields = (VMStateField []) {
264 VMSTATE_UINT32_ARRAY(dmaregs, DMAState, DMA_REGS),
265 VMSTATE_END_OF_LIST()
269 static int sparc32_dma_init1(SysBusDevice *dev)
271 DMAState *s = FROM_SYSBUS(DMAState, dev);
272 int reg_size;
274 sysbus_init_irq(dev, &s->irq);
276 reg_size = s->is_ledma ? DMA_ETH_SIZE : DMA_SIZE;
277 memory_region_init_io(&s->iomem, &dma_mem_ops, s, "dma", reg_size);
278 sysbus_init_mmio(dev, &s->iomem);
280 qdev_init_gpio_in(&dev->qdev, dma_set_irq, 1);
281 qdev_init_gpio_out(&dev->qdev, s->gpio, 2);
283 return 0;
286 static Property sparc32_dma_properties[] = {
287 DEFINE_PROP_PTR("iommu_opaque", DMAState, iommu),
288 DEFINE_PROP_UINT32("is_ledma", DMAState, is_ledma, 0),
289 DEFINE_PROP_END_OF_LIST(),
292 static void sparc32_dma_class_init(ObjectClass *klass, void *data)
294 DeviceClass *dc = DEVICE_CLASS(klass);
295 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
297 k->init = sparc32_dma_init1;
298 dc->reset = dma_reset;
299 dc->vmsd = &vmstate_dma;
300 dc->props = sparc32_dma_properties;
303 static const TypeInfo sparc32_dma_info = {
304 .name = "sparc32_dma",
305 .parent = TYPE_SYS_BUS_DEVICE,
306 .instance_size = sizeof(DMAState),
307 .class_init = sparc32_dma_class_init,
310 static void sparc32_dma_register_types(void)
312 type_register_static(&sparc32_dma_info);
315 type_init(sparc32_dma_register_types)