vmport: QOM'ify
[qemu/agraf.git] / hw / misc / exynos4210_pmu.c
blobba5aa8d0e4805efcdd440b7e4b6c5dfa1a16753b
1 /*
2 * Exynos4210 Power Management Unit (PMU) Emulation
4 * Copyright (C) 2011 Samsung Electronics Co Ltd.
5 * Maksim Kozlov <m.kozlov@samsung.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 * for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
22 * This model implements PMU registers just as a bulk of memory. Currently,
23 * the only reason this device exists is that secondary CPU boot loader
24 * uses PMU INFORM5 register as a holding pen.
27 #include "hw/sysbus.h"
29 #ifndef DEBUG_PMU
30 #define DEBUG_PMU 0
31 #endif
33 #ifndef DEBUG_PMU_EXTEND
34 #define DEBUG_PMU_EXTEND 0
35 #endif
37 #if DEBUG_PMU
38 #define PRINT_DEBUG(fmt, args...) \
39 do { \
40 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
41 } while (0)
43 #if DEBUG_PMU_EXTEND
44 #define PRINT_DEBUG_EXTEND(fmt, args...) \
45 do { \
46 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
47 } while (0)
48 #else
49 #define PRINT_DEBUG_EXTEND(fmt, args...) do {} while (0)
50 #endif /* EXTEND */
52 #else
53 #define PRINT_DEBUG(fmt, args...) do {} while (0)
54 #define PRINT_DEBUG_EXTEND(fmt, args...) do {} while (0)
55 #endif
58 * Offsets for PMU registers
60 #define OM_STAT 0x0000 /* OM status register */
61 #define RTC_CLKO_SEL 0x000C /* Controls RTCCLKOUT */
62 #define GNSS_RTC_OUT_CTRL 0x0010 /* Controls GNSS_RTC_OUT */
63 /* Decides whether system-level low-power mode is used. */
64 #define SYSTEM_POWER_DOWN_CTRL 0x0200
65 /* Sets control options for CENTRAL_SEQ */
66 #define SYSTEM_POWER_DOWN_OPTION 0x0208
67 #define SWRESET 0x0400 /* Generate software reset */
68 #define RST_STAT 0x0404 /* Reset status register */
69 #define WAKEUP_STAT 0x0600 /* Wakeup status register */
70 #define EINT_WAKEUP_MASK 0x0604 /* Configure External INTerrupt mask */
71 #define WAKEUP_MASK 0x0608 /* Configure wakeup source mask */
72 #define HDMI_PHY_CONTROL 0x0700 /* HDMI PHY control register */
73 #define USBDEVICE_PHY_CONTROL 0x0704 /* USB Device PHY control register */
74 #define USBHOST_PHY_CONTROL 0x0708 /* USB HOST PHY control register */
75 #define DAC_PHY_CONTROL 0x070C /* DAC control register */
76 #define MIPI_PHY0_CONTROL 0x0710 /* MIPI PHY control register */
77 #define MIPI_PHY1_CONTROL 0x0714 /* MIPI PHY control register */
78 #define ADC_PHY_CONTROL 0x0718 /* TS-ADC control register */
79 #define PCIe_PHY_CONTROL 0x071C /* TS-PCIe control register */
80 #define SATA_PHY_CONTROL 0x0720 /* TS-SATA control register */
81 #define INFORM0 0x0800 /* Information register 0 */
82 #define INFORM1 0x0804 /* Information register 1 */
83 #define INFORM2 0x0808 /* Information register 2 */
84 #define INFORM3 0x080C /* Information register 3 */
85 #define INFORM4 0x0810 /* Information register 4 */
86 #define INFORM5 0x0814 /* Information register 5 */
87 #define INFORM6 0x0818 /* Information register 6 */
88 #define INFORM7 0x081C /* Information register 7 */
89 #define PMU_DEBUG 0x0A00 /* PMU debug register */
90 /* Registers to set system-level low-power option */
91 #define ARM_CORE0_SYS_PWR_REG 0x1000
92 #define ARM_CORE1_SYS_PWR_REG 0x1010
93 #define ARM_COMMON_SYS_PWR_REG 0x1080
94 #define ARM_CPU_L2_0_SYS_PWR_REG 0x10C0
95 #define ARM_CPU_L2_1_SYS_PWR_REG 0x10C4
96 #define CMU_ACLKSTOP_SYS_PWR_REG 0x1100
97 #define CMU_SCLKSTOP_SYS_PWR_REG 0x1104
98 #define CMU_RESET_SYS_PWR_REG 0x110C
99 #define APLL_SYSCLK_SYS_PWR_REG 0x1120
100 #define MPLL_SYSCLK_SYS_PWR_REG 0x1124
101 #define VPLL_SYSCLK_SYS_PWR_REG 0x1128
102 #define EPLL_SYSCLK_SYS_PWR_REG 0x112C
103 #define CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG 0x1138
104 #define CMU_RESET_GPS_ALIVE_SYS_PWR_REG 0x113C
105 #define CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140
106 #define CMU_CLKSTOP_TV_SYS_PWR_REG 0x1144
107 #define CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148
108 #define CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C
109 #define CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150
110 #define CMU_CLKSTOP_LCD1_SYS_PWR_REG 0x1154
111 #define CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158
112 #define CMU_CLKSTOP_GPS_SYS_PWR_REG 0x115C
113 #define CMU_RESET_CAM_SYS_PWR_REG 0x1160
114 #define CMU_RESET_TV_SYS_PWR_REG 0x1164
115 #define CMU_RESET_MFC_SYS_PWR_REG 0x1168
116 #define CMU_RESET_G3D_SYS_PWR_REG 0x116C
117 #define CMU_RESET_LCD0_SYS_PWR_REG 0x1170
118 #define CMU_RESET_LCD1_SYS_PWR_REG 0x1174
119 #define CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178
120 #define CMU_RESET_GPS_SYS_PWR_REG 0x117C
121 #define TOP_BUS_SYS_PWR_REG 0x1180
122 #define TOP_RETENTION_SYS_PWR_REG 0x1184
123 #define TOP_PWR_SYS_PWR_REG 0x1188
124 #define LOGIC_RESET_SYS_PWR_REG 0x11A0
125 #define OneNANDXL_MEM_SYS_PWR_REG 0x11C0
126 #define MODEMIF_MEM_SYS_PWR_REG 0x11C4
127 #define USBDEVICE_MEM_SYS_PWR_REG 0x11CC
128 #define SDMMC_MEM_SYS_PWR_REG 0x11D0
129 #define CSSYS_MEM_SYS_PWR_REG 0x11D4
130 #define SECSS_MEM_SYS_PWR_REG 0x11D8
131 #define PCIe_MEM_SYS_PWR_REG 0x11E0
132 #define SATA_MEM_SYS_PWR_REG 0x11E4
133 #define PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
134 #define PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204
135 #define PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
136 #define PAD_RETENTION_UART_SYS_PWR_REG 0x1224
137 #define PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228
138 #define PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C
139 #define PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230
140 #define PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234
141 #define PAD_ISOLATION_SYS_PWR_REG 0x1240
142 #define PAD_ALV_SEL_SYS_PWR_REG 0x1260
143 #define XUSBXTI_SYS_PWR_REG 0x1280
144 #define XXTI_SYS_PWR_REG 0x1284
145 #define EXT_REGULATOR_SYS_PWR_REG 0x12C0
146 #define GPIO_MODE_SYS_PWR_REG 0x1300
147 #define GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340
148 #define CAM_SYS_PWR_REG 0x1380
149 #define TV_SYS_PWR_REG 0x1384
150 #define MFC_SYS_PWR_REG 0x1388
151 #define G3D_SYS_PWR_REG 0x138C
152 #define LCD0_SYS_PWR_REG 0x1390
153 #define LCD1_SYS_PWR_REG 0x1394
154 #define MAUDIO_SYS_PWR_REG 0x1398
155 #define GPS_SYS_PWR_REG 0x139C
156 #define GPS_ALIVE_SYS_PWR_REG 0x13A0
157 #define ARM_CORE0_CONFIGURATION 0x2000 /* Configure power mode of ARM_CORE0 */
158 #define ARM_CORE0_STATUS 0x2004 /* Check power mode of ARM_CORE0 */
159 #define ARM_CORE0_OPTION 0x2008 /* Sets control options for ARM_CORE0 */
160 #define ARM_CORE1_CONFIGURATION 0x2080 /* Configure power mode of ARM_CORE1 */
161 #define ARM_CORE1_STATUS 0x2084 /* Check power mode of ARM_CORE1 */
162 #define ARM_CORE1_OPTION 0x2088 /* Sets control options for ARM_CORE0 */
163 #define ARM_COMMON_OPTION 0x2408 /* Sets control options for ARM_COMMON */
164 /* Configure power mode of ARM_CPU_L2_0 */
165 #define ARM_CPU_L2_0_CONFIGURATION 0x2600
166 #define ARM_CPU_L2_0_STATUS 0x2604 /* Check power mode of ARM_CPU_L2_0 */
167 /* Configure power mode of ARM_CPU_L2_1 */
168 #define ARM_CPU_L2_1_CONFIGURATION 0x2620
169 #define ARM_CPU_L2_1_STATUS 0x2624 /* Check power mode of ARM_CPU_L2_1 */
170 /* Sets control options for PAD_RETENTION_MAUDIO */
171 #define PAD_RETENTION_MAUDIO_OPTION 0x3028
172 /* Sets control options for PAD_RETENTION_GPIO */
173 #define PAD_RETENTION_GPIO_OPTION 0x3108
174 /* Sets control options for PAD_RETENTION_UART */
175 #define PAD_RETENTION_UART_OPTION 0x3128
176 /* Sets control options for PAD_RETENTION_MMCA */
177 #define PAD_RETENTION_MMCA_OPTION 0x3148
178 /* Sets control options for PAD_RETENTION_MMCB */
179 #define PAD_RETENTION_MMCB_OPTION 0x3168
180 /* Sets control options for PAD_RETENTION_EBIA */
181 #define PAD_RETENTION_EBIA_OPTION 0x3188
182 /* Sets control options for PAD_RETENTION_EBIB */
183 #define PAD_RETENTION_EBIB_OPTION 0x31A8
184 #define PS_HOLD_CONTROL 0x330C /* PS_HOLD control register */
185 #define XUSBXTI_CONFIGURATION 0x3400 /* Configure the pad of XUSBXTI */
186 #define XUSBXTI_STATUS 0x3404 /* Check the pad of XUSBXTI */
187 /* Sets time required for XUSBXTI to be stabilized */
188 #define XUSBXTI_DURATION 0x341C
189 #define XXTI_CONFIGURATION 0x3420 /* Configure the pad of XXTI */
190 #define XXTI_STATUS 0x3424 /* Check the pad of XXTI */
191 /* Sets time required for XXTI to be stabilized */
192 #define XXTI_DURATION 0x343C
193 /* Sets time required for EXT_REGULATOR to be stabilized */
194 #define EXT_REGULATOR_DURATION 0x361C
195 #define CAM_CONFIGURATION 0x3C00 /* Configure power mode of CAM */
196 #define CAM_STATUS 0x3C04 /* Check power mode of CAM */
197 #define CAM_OPTION 0x3C08 /* Sets control options for CAM */
198 #define TV_CONFIGURATION 0x3C20 /* Configure power mode of TV */
199 #define TV_STATUS 0x3C24 /* Check power mode of TV */
200 #define TV_OPTION 0x3C28 /* Sets control options for TV */
201 #define MFC_CONFIGURATION 0x3C40 /* Configure power mode of MFC */
202 #define MFC_STATUS 0x3C44 /* Check power mode of MFC */
203 #define MFC_OPTION 0x3C48 /* Sets control options for MFC */
204 #define G3D_CONFIGURATION 0x3C60 /* Configure power mode of G3D */
205 #define G3D_STATUS 0x3C64 /* Check power mode of G3D */
206 #define G3D_OPTION 0x3C68 /* Sets control options for G3D */
207 #define LCD0_CONFIGURATION 0x3C80 /* Configure power mode of LCD0 */
208 #define LCD0_STATUS 0x3C84 /* Check power mode of LCD0 */
209 #define LCD0_OPTION 0x3C88 /* Sets control options for LCD0 */
210 #define LCD1_CONFIGURATION 0x3CA0 /* Configure power mode of LCD1 */
211 #define LCD1_STATUS 0x3CA4 /* Check power mode of LCD1 */
212 #define LCD1_OPTION 0x3CA8 /* Sets control options for LCD1 */
213 #define GPS_CONFIGURATION 0x3CE0 /* Configure power mode of GPS */
214 #define GPS_STATUS 0x3CE4 /* Check power mode of GPS */
215 #define GPS_OPTION 0x3CE8 /* Sets control options for GPS */
216 #define GPS_ALIVE_CONFIGURATION 0x3D00 /* Configure power mode of GPS */
217 #define GPS_ALIVE_STATUS 0x3D04 /* Check power mode of GPS */
218 #define GPS_ALIVE_OPTION 0x3D08 /* Sets control options for GPS */
220 #define EXYNOS4210_PMU_REGS_MEM_SIZE 0x3d0c
222 typedef struct Exynos4210PmuReg {
223 const char *name; /* for debug only */
224 uint32_t offset;
225 uint32_t reset_value;
226 } Exynos4210PmuReg;
228 static const Exynos4210PmuReg exynos4210_pmu_regs[] = {
229 {"OM_STAT", OM_STAT, 0x00000000},
230 {"RTC_CLKO_SEL", RTC_CLKO_SEL, 0x00000000},
231 {"GNSS_RTC_OUT_CTRL", GNSS_RTC_OUT_CTRL, 0x00000001},
232 {"SYSTEM_POWER_DOWN_CTRL", SYSTEM_POWER_DOWN_CTRL, 0x00010000},
233 {"SYSTEM_POWER_DOWN_OPTION", SYSTEM_POWER_DOWN_OPTION, 0x03030000},
234 {"SWRESET", SWRESET, 0x00000000},
235 {"RST_STAT", RST_STAT, 0x00000000},
236 {"WAKEUP_STAT", WAKEUP_STAT, 0x00000000},
237 {"EINT_WAKEUP_MASK", EINT_WAKEUP_MASK, 0x00000000},
238 {"WAKEUP_MASK", WAKEUP_MASK, 0x00000000},
239 {"HDMI_PHY_CONTROL", HDMI_PHY_CONTROL, 0x00960000},
240 {"USBDEVICE_PHY_CONTROL", USBDEVICE_PHY_CONTROL, 0x00000000},
241 {"USBHOST_PHY_CONTROL", USBHOST_PHY_CONTROL, 0x00000000},
242 {"DAC_PHY_CONTROL", DAC_PHY_CONTROL, 0x00000000},
243 {"MIPI_PHY0_CONTROL", MIPI_PHY0_CONTROL, 0x00000000},
244 {"MIPI_PHY1_CONTROL", MIPI_PHY1_CONTROL, 0x00000000},
245 {"ADC_PHY_CONTROL", ADC_PHY_CONTROL, 0x00000001},
246 {"PCIe_PHY_CONTROL", PCIe_PHY_CONTROL, 0x00000000},
247 {"SATA_PHY_CONTROL", SATA_PHY_CONTROL, 0x00000000},
248 {"INFORM0", INFORM0, 0x00000000},
249 {"INFORM1", INFORM1, 0x00000000},
250 {"INFORM2", INFORM2, 0x00000000},
251 {"INFORM3", INFORM3, 0x00000000},
252 {"INFORM4", INFORM4, 0x00000000},
253 {"INFORM5", INFORM5, 0x00000000},
254 {"INFORM6", INFORM6, 0x00000000},
255 {"INFORM7", INFORM7, 0x00000000},
256 {"PMU_DEBUG", PMU_DEBUG, 0x00000000},
257 {"ARM_CORE0_SYS_PWR_REG", ARM_CORE0_SYS_PWR_REG, 0xFFFFFFFF},
258 {"ARM_CORE1_SYS_PWR_REG", ARM_CORE1_SYS_PWR_REG, 0xFFFFFFFF},
259 {"ARM_COMMON_SYS_PWR_REG", ARM_COMMON_SYS_PWR_REG, 0xFFFFFFFF},
260 {"ARM_CPU_L2_0_SYS_PWR_REG", ARM_CPU_L2_0_SYS_PWR_REG, 0xFFFFFFFF},
261 {"ARM_CPU_L2_1_SYS_PWR_REG", ARM_CPU_L2_1_SYS_PWR_REG, 0xFFFFFFFF},
262 {"CMU_ACLKSTOP_SYS_PWR_REG", CMU_ACLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
263 {"CMU_SCLKSTOP_SYS_PWR_REG", CMU_SCLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
264 {"CMU_RESET_SYS_PWR_REG", CMU_RESET_SYS_PWR_REG, 0xFFFFFFFF},
265 {"APLL_SYSCLK_SYS_PWR_REG", APLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
266 {"MPLL_SYSCLK_SYS_PWR_REG", MPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
267 {"VPLL_SYSCLK_SYS_PWR_REG", VPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
268 {"EPLL_SYSCLK_SYS_PWR_REG", EPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
269 {"CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG", CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG,
270 0xFFFFFFFF},
271 {"CMU_RESET_GPS_ALIVE_SYS_PWR_REG", CMU_RESET_GPS_ALIVE_SYS_PWR_REG,
272 0xFFFFFFFF},
273 {"CMU_CLKSTOP_CAM_SYS_PWR_REG", CMU_CLKSTOP_CAM_SYS_PWR_REG, 0xFFFFFFFF},
274 {"CMU_CLKSTOP_TV_SYS_PWR_REG", CMU_CLKSTOP_TV_SYS_PWR_REG, 0xFFFFFFFF},
275 {"CMU_CLKSTOP_MFC_SYS_PWR_REG", CMU_CLKSTOP_MFC_SYS_PWR_REG, 0xFFFFFFFF},
276 {"CMU_CLKSTOP_G3D_SYS_PWR_REG", CMU_CLKSTOP_G3D_SYS_PWR_REG, 0xFFFFFFFF},
277 {"CMU_CLKSTOP_LCD0_SYS_PWR_REG", CMU_CLKSTOP_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
278 {"CMU_CLKSTOP_LCD1_SYS_PWR_REG", CMU_CLKSTOP_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
279 {"CMU_CLKSTOP_MAUDIO_SYS_PWR_REG", CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,
280 0xFFFFFFFF},
281 {"CMU_CLKSTOP_GPS_SYS_PWR_REG", CMU_CLKSTOP_GPS_SYS_PWR_REG, 0xFFFFFFFF},
282 {"CMU_RESET_CAM_SYS_PWR_REG", CMU_RESET_CAM_SYS_PWR_REG, 0xFFFFFFFF},
283 {"CMU_RESET_TV_SYS_PWR_REG", CMU_RESET_TV_SYS_PWR_REG, 0xFFFFFFFF},
284 {"CMU_RESET_MFC_SYS_PWR_REG", CMU_RESET_MFC_SYS_PWR_REG, 0xFFFFFFFF},
285 {"CMU_RESET_G3D_SYS_PWR_REG", CMU_RESET_G3D_SYS_PWR_REG, 0xFFFFFFFF},
286 {"CMU_RESET_LCD0_SYS_PWR_REG", CMU_RESET_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
287 {"CMU_RESET_LCD1_SYS_PWR_REG", CMU_RESET_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
288 {"CMU_RESET_MAUDIO_SYS_PWR_REG", CMU_RESET_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
289 {"CMU_RESET_GPS_SYS_PWR_REG", CMU_RESET_GPS_SYS_PWR_REG, 0xFFFFFFFF},
290 {"TOP_BUS_SYS_PWR_REG", TOP_BUS_SYS_PWR_REG, 0xFFFFFFFF},
291 {"TOP_RETENTION_SYS_PWR_REG", TOP_RETENTION_SYS_PWR_REG, 0xFFFFFFFF},
292 {"TOP_PWR_SYS_PWR_REG", TOP_PWR_SYS_PWR_REG, 0xFFFFFFFF},
293 {"LOGIC_RESET_SYS_PWR_REG", LOGIC_RESET_SYS_PWR_REG, 0xFFFFFFFF},
294 {"OneNANDXL_MEM_SYS_PWR_REG", OneNANDXL_MEM_SYS_PWR_REG, 0xFFFFFFFF},
295 {"MODEMIF_MEM_SYS_PWR_REG", MODEMIF_MEM_SYS_PWR_REG, 0xFFFFFFFF},
296 {"USBDEVICE_MEM_SYS_PWR_REG", USBDEVICE_MEM_SYS_PWR_REG, 0xFFFFFFFF},
297 {"SDMMC_MEM_SYS_PWR_REG", SDMMC_MEM_SYS_PWR_REG, 0xFFFFFFFF},
298 {"CSSYS_MEM_SYS_PWR_REG", CSSYS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
299 {"SECSS_MEM_SYS_PWR_REG", SECSS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
300 {"PCIe_MEM_SYS_PWR_REG", PCIe_MEM_SYS_PWR_REG, 0xFFFFFFFF},
301 {"SATA_MEM_SYS_PWR_REG", SATA_MEM_SYS_PWR_REG, 0xFFFFFFFF},
302 {"PAD_RETENTION_DRAM_SYS_PWR_REG", PAD_RETENTION_DRAM_SYS_PWR_REG,
303 0xFFFFFFFF},
304 {"PAD_RETENTION_MAUDIO_SYS_PWR_REG", PAD_RETENTION_MAUDIO_SYS_PWR_REG,
305 0xFFFFFFFF},
306 {"PAD_RETENTION_GPIO_SYS_PWR_REG", PAD_RETENTION_GPIO_SYS_PWR_REG,
307 0xFFFFFFFF},
308 {"PAD_RETENTION_UART_SYS_PWR_REG", PAD_RETENTION_UART_SYS_PWR_REG,
309 0xFFFFFFFF},
310 {"PAD_RETENTION_MMCA_SYS_PWR_REG", PAD_RETENTION_MMCA_SYS_PWR_REG,
311 0xFFFFFFFF},
312 {"PAD_RETENTION_MMCB_SYS_PWR_REG", PAD_RETENTION_MMCB_SYS_PWR_REG,
313 0xFFFFFFFF},
314 {"PAD_RETENTION_EBIA_SYS_PWR_REG", PAD_RETENTION_EBIA_SYS_PWR_REG,
315 0xFFFFFFFF},
316 {"PAD_RETENTION_EBIB_SYS_PWR_REG", PAD_RETENTION_EBIB_SYS_PWR_REG,
317 0xFFFFFFFF},
318 {"PAD_ISOLATION_SYS_PWR_REG", PAD_ISOLATION_SYS_PWR_REG, 0xFFFFFFFF},
319 {"PAD_ALV_SEL_SYS_PWR_REG", PAD_ALV_SEL_SYS_PWR_REG, 0xFFFFFFFF},
320 {"XUSBXTI_SYS_PWR_REG", XUSBXTI_SYS_PWR_REG, 0xFFFFFFFF},
321 {"XXTI_SYS_PWR_REG", XXTI_SYS_PWR_REG, 0xFFFFFFFF},
322 {"EXT_REGULATOR_SYS_PWR_REG", EXT_REGULATOR_SYS_PWR_REG, 0xFFFFFFFF},
323 {"GPIO_MODE_SYS_PWR_REG", GPIO_MODE_SYS_PWR_REG, 0xFFFFFFFF},
324 {"GPIO_MODE_MAUDIO_SYS_PWR_REG", GPIO_MODE_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
325 {"CAM_SYS_PWR_REG", CAM_SYS_PWR_REG, 0xFFFFFFFF},
326 {"TV_SYS_PWR_REG", TV_SYS_PWR_REG, 0xFFFFFFFF},
327 {"MFC_SYS_PWR_REG", MFC_SYS_PWR_REG, 0xFFFFFFFF},
328 {"G3D_SYS_PWR_REG", G3D_SYS_PWR_REG, 0xFFFFFFFF},
329 {"LCD0_SYS_PWR_REG", LCD0_SYS_PWR_REG, 0xFFFFFFFF},
330 {"LCD1_SYS_PWR_REG", LCD1_SYS_PWR_REG, 0xFFFFFFFF},
331 {"MAUDIO_SYS_PWR_REG", MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
332 {"GPS_SYS_PWR_REG", GPS_SYS_PWR_REG, 0xFFFFFFFF},
333 {"GPS_ALIVE_SYS_PWR_REG", GPS_ALIVE_SYS_PWR_REG, 0xFFFFFFFF},
334 {"ARM_CORE0_CONFIGURATION", ARM_CORE0_CONFIGURATION, 0x00000003},
335 {"ARM_CORE0_STATUS", ARM_CORE0_STATUS, 0x00030003},
336 {"ARM_CORE0_OPTION", ARM_CORE0_OPTION, 0x01010001},
337 {"ARM_CORE1_CONFIGURATION", ARM_CORE1_CONFIGURATION, 0x00000003},
338 {"ARM_CORE1_STATUS", ARM_CORE1_STATUS, 0x00030003},
339 {"ARM_CORE1_OPTION", ARM_CORE1_OPTION, 0x01010001},
340 {"ARM_COMMON_OPTION", ARM_COMMON_OPTION, 0x00000001},
341 {"ARM_CPU_L2_0_CONFIGURATION", ARM_CPU_L2_0_CONFIGURATION, 0x00000003},
342 {"ARM_CPU_L2_0_STATUS", ARM_CPU_L2_0_STATUS, 0x00000003},
343 {"ARM_CPU_L2_1_CONFIGURATION", ARM_CPU_L2_1_CONFIGURATION, 0x00000003},
344 {"ARM_CPU_L2_1_STATUS", ARM_CPU_L2_1_STATUS, 0x00000003},
345 {"PAD_RETENTION_MAUDIO_OPTION", PAD_RETENTION_MAUDIO_OPTION, 0x00000000},
346 {"PAD_RETENTION_GPIO_OPTION", PAD_RETENTION_GPIO_OPTION, 0x00000000},
347 {"PAD_RETENTION_UART_OPTION", PAD_RETENTION_UART_OPTION, 0x00000000},
348 {"PAD_RETENTION_MMCA_OPTION", PAD_RETENTION_MMCA_OPTION, 0x00000000},
349 {"PAD_RETENTION_MMCB_OPTION", PAD_RETENTION_MMCB_OPTION, 0x00000000},
350 {"PAD_RETENTION_EBIA_OPTION", PAD_RETENTION_EBIA_OPTION, 0x00000000},
351 {"PAD_RETENTION_EBIB_OPTION", PAD_RETENTION_EBIB_OPTION, 0x00000000},
352 {"PS_HOLD_CONTROL", PS_HOLD_CONTROL, 0x00005200},
353 {"XUSBXTI_CONFIGURATION", XUSBXTI_CONFIGURATION, 0x00000001},
354 {"XUSBXTI_STATUS", XUSBXTI_STATUS, 0x00000001},
355 {"XUSBXTI_DURATION", XUSBXTI_DURATION, 0xFFF00000},
356 {"XXTI_CONFIGURATION", XXTI_CONFIGURATION, 0x00000001},
357 {"XXTI_STATUS", XXTI_STATUS, 0x00000001},
358 {"XXTI_DURATION", XXTI_DURATION, 0xFFF00000},
359 {"EXT_REGULATOR_DURATION", EXT_REGULATOR_DURATION, 0xFFF03FFF},
360 {"CAM_CONFIGURATION", CAM_CONFIGURATION, 0x00000007},
361 {"CAM_STATUS", CAM_STATUS, 0x00060007},
362 {"CAM_OPTION", CAM_OPTION, 0x00000001},
363 {"TV_CONFIGURATION", TV_CONFIGURATION, 0x00000007},
364 {"TV_STATUS", TV_STATUS, 0x00060007},
365 {"TV_OPTION", TV_OPTION, 0x00000001},
366 {"MFC_CONFIGURATION", MFC_CONFIGURATION, 0x00000007},
367 {"MFC_STATUS", MFC_STATUS, 0x00060007},
368 {"MFC_OPTION", MFC_OPTION, 0x00000001},
369 {"G3D_CONFIGURATION", G3D_CONFIGURATION, 0x00000007},
370 {"G3D_STATUS", G3D_STATUS, 0x00060007},
371 {"G3D_OPTION", G3D_OPTION, 0x00000001},
372 {"LCD0_CONFIGURATION", LCD0_CONFIGURATION, 0x00000007},
373 {"LCD0_STATUS", LCD0_STATUS, 0x00060007},
374 {"LCD0_OPTION", LCD0_OPTION, 0x00000001},
375 {"LCD1_CONFIGURATION", LCD1_CONFIGURATION, 0x00000007},
376 {"LCD1_STATUS", LCD1_STATUS, 0x00060007},
377 {"LCD1_OPTION", LCD1_OPTION, 0x00000001},
378 {"GPS_CONFIGURATION", GPS_CONFIGURATION, 0x00000007},
379 {"GPS_STATUS", GPS_STATUS, 0x00060007},
380 {"GPS_OPTION", GPS_OPTION, 0x00000001},
381 {"GPS_ALIVE_CONFIGURATION", GPS_ALIVE_CONFIGURATION, 0x00000007},
382 {"GPS_ALIVE_STATUS", GPS_ALIVE_STATUS, 0x00060007},
383 {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001},
386 #define PMU_NUM_OF_REGISTERS \
387 (sizeof(exynos4210_pmu_regs) / sizeof(Exynos4210PmuReg))
389 typedef struct Exynos4210PmuState {
390 SysBusDevice busdev;
391 MemoryRegion iomem;
392 uint32_t reg[PMU_NUM_OF_REGISTERS];
393 } Exynos4210PmuState;
395 static uint64_t exynos4210_pmu_read(void *opaque, hwaddr offset,
396 unsigned size)
398 Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
399 unsigned i;
400 const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
402 for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
403 if (reg_p->offset == offset) {
404 PRINT_DEBUG_EXTEND("%s [0x%04x] -> 0x%04x\n", reg_p->name,
405 (uint32_t)offset, s->reg[i]);
406 return s->reg[i];
408 reg_p++;
410 PRINT_DEBUG("QEMU PMU ERROR: bad read offset 0x%04x\n", (uint32_t)offset);
411 return 0;
414 static void exynos4210_pmu_write(void *opaque, hwaddr offset,
415 uint64_t val, unsigned size)
417 Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
418 unsigned i;
419 const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
421 for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
422 if (reg_p->offset == offset) {
423 PRINT_DEBUG_EXTEND("%s <0x%04x> <- 0x%04x\n", reg_p->name,
424 (uint32_t)offset, (uint32_t)val);
425 s->reg[i] = val;
426 return;
428 reg_p++;
430 PRINT_DEBUG("QEMU PMU ERROR: bad write offset 0x%04x\n", (uint32_t)offset);
433 static const MemoryRegionOps exynos4210_pmu_ops = {
434 .read = exynos4210_pmu_read,
435 .write = exynos4210_pmu_write,
436 .endianness = DEVICE_NATIVE_ENDIAN,
437 .valid = {
438 .min_access_size = 4,
439 .max_access_size = 4,
440 .unaligned = false
444 static void exynos4210_pmu_reset(DeviceState *dev)
446 Exynos4210PmuState *s =
447 container_of(dev, Exynos4210PmuState, busdev.qdev);
448 unsigned i;
450 /* Set default values for registers */
451 for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
452 s->reg[i] = exynos4210_pmu_regs[i].reset_value;
456 static int exynos4210_pmu_init(SysBusDevice *dev)
458 Exynos4210PmuState *s = FROM_SYSBUS(Exynos4210PmuState, dev);
460 /* memory mapping */
461 memory_region_init_io(&s->iomem, &exynos4210_pmu_ops, s, "exynos4210.pmu",
462 EXYNOS4210_PMU_REGS_MEM_SIZE);
463 sysbus_init_mmio(dev, &s->iomem);
464 return 0;
467 static const VMStateDescription exynos4210_pmu_vmstate = {
468 .name = "exynos4210.pmu",
469 .version_id = 1,
470 .minimum_version_id = 1,
471 .fields = (VMStateField[]) {
472 VMSTATE_UINT32_ARRAY(reg, Exynos4210PmuState, PMU_NUM_OF_REGISTERS),
473 VMSTATE_END_OF_LIST()
477 static void exynos4210_pmu_class_init(ObjectClass *klass, void *data)
479 DeviceClass *dc = DEVICE_CLASS(klass);
480 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
482 k->init = exynos4210_pmu_init;
483 dc->reset = exynos4210_pmu_reset;
484 dc->vmsd = &exynos4210_pmu_vmstate;
487 static const TypeInfo exynos4210_pmu_info = {
488 .name = "exynos4210.pmu",
489 .parent = TYPE_SYS_BUS_DEVICE,
490 .instance_size = sizeof(Exynos4210PmuState),
491 .class_init = exynos4210_pmu_class_init,
494 static void exynos4210_pmu_register(void)
496 type_register_static(&exynos4210_pmu_info);
499 type_init(exynos4210_pmu_register)