hw/usb-msd.c

   1 /*
   2  * USB Mass Storage Device emulation
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the LGPL.
   8  */
   9
  10 #include "qemu-common.h"
  11 #include "qemu-option.h"
  12 #include "qemu-config.h"
  13 #include "usb.h"
  14 #include "usb-desc.h"
  15 #include "scsi.h"
  16 #include "console.h"
  17 #include "monitor.h"
  18 #include "sysemu.h"
  19 #include "blockdev.h"
  20
  21 //#define DEBUG_MSD
  22
  23 #ifdef DEBUG_MSD
  24 #define DPRINTF(fmt, ...) \
  25 do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
  26 #else
  27 #define DPRINTF(fmt, ...) do {} while(0)
  28 #endif
  29
  30 /* USB requests.  */
  31 #define MassStorageReset  0xff
  32 #define GetMaxLun         0xfe
  33
  34 enum USBMSDMode {
  35     USB_MSDM_CBW, /* Command Block.  */
  36     USB_MSDM_DATAOUT, /* Transfer data to device.  */
  37     USB_MSDM_DATAIN, /* Transfer data from device.  */
  38     USB_MSDM_CSW /* Command Status.  */
  39 };
  40
  41 typedef struct {
  42     USBDevice dev;
  43     enum USBMSDMode mode;
  44     uint32_t scsi_len;
  45     uint8_t *scsi_buf;
  46     uint32_t data_len;
  47     uint32_t residue;
  48     uint32_t tag;
  49     SCSIRequest *req;
  50     SCSIBus bus;
  51     BlockConf conf;
  52     char *serial;
  53     SCSIDevice *scsi_dev;
  54     uint32_t removable;
  55     int result;
  56     /* For async completion.  */
  57     USBPacket *packet;
  58 } MSDState;
  59
  60 struct usb_msd_cbw {
  61     uint32_t sig;
  62     uint32_t tag;
  63     uint32_t data_len;
  64     uint8_t flags;
  65     uint8_t lun;
  66     uint8_t cmd_len;
  67     uint8_t cmd[16];
  68 };
  69
  70 struct usb_msd_csw {
  71     uint32_t sig;
  72     uint32_t tag;
  73     uint32_t residue;
  74     uint8_t status;
  75 };
  76
  77 enum {
  78     STR_MANUFACTURER = 1,
  79     STR_PRODUCT,
  80     STR_SERIALNUMBER,
  81     STR_CONFIG_FULL,
  82     STR_CONFIG_HIGH,
  83 };
  84
  85 static const USBDescStrings desc_strings = {
  86     [STR_MANUFACTURER] = "QEMU " QEMU_VERSION,
  87     [STR_PRODUCT]      = "QEMU USB HARDDRIVE",
  88     [STR_SERIALNUMBER] = "1",
  89     [STR_CONFIG_FULL]  = "Full speed config (usb 1.1)",
  90     [STR_CONFIG_HIGH]  = "High speed config (usb 2.0)",
  91 };
  92
  93 static const USBDescIface desc_iface_full = {
  94     .bInterfaceNumber              = 0,
  95     .bNumEndpoints                 = 2,
  96     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
  97     .bInterfaceSubClass            = 0x06, /* SCSI */
  98     .bInterfaceProtocol            = 0x50, /* Bulk */
  99     .eps = (USBDescEndpoint[]) {
 100         {
 101             .bEndpointAddress      = USB_DIR_IN | 0x01,
 102             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 103             .wMaxPacketSize        = 64,
 104         },{
 105             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 106             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 107             .wMaxPacketSize        = 64,
 108         },
 109     }
 110 };
 111
 112 static const USBDescDevice desc_device_full = {
 113     .bcdUSB                        = 0x0200,
 114     .bMaxPacketSize0               = 8,
 115     .bNumConfigurations            = 1,
 116     .confs = (USBDescConfig[]) {
 117         {
 118             .bNumInterfaces        = 1,
 119             .bConfigurationValue   = 1,
 120             .iConfiguration        = STR_CONFIG_FULL,
 121             .bmAttributes          = 0xc0,
 122             .nif = 1,
 123             .ifs = &desc_iface_full,
 124         },
 125     },
 126 };
 127
 128 static const USBDescIface desc_iface_high = {
 129     .bInterfaceNumber              = 0,
 130     .bNumEndpoints                 = 2,
 131     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 132     .bInterfaceSubClass            = 0x06, /* SCSI */
 133     .bInterfaceProtocol            = 0x50, /* Bulk */
 134     .eps = (USBDescEndpoint[]) {
 135         {
 136             .bEndpointAddress      = USB_DIR_IN | 0x01,
 137             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 138             .wMaxPacketSize        = 512,
 139         },{
 140             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 141             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 142             .wMaxPacketSize        = 512,
 143         },
 144     }
 145 };
 146
 147 static const USBDescDevice desc_device_high = {
 148     .bcdUSB                        = 0x0200,
 149     .bMaxPacketSize0               = 64,
 150     .bNumConfigurations            = 1,
 151     .confs = (USBDescConfig[]) {
 152         {
 153             .bNumInterfaces        = 1,
 154             .bConfigurationValue   = 1,
 155             .iConfiguration        = STR_CONFIG_HIGH,
 156             .bmAttributes          = 0xc0,
 157             .nif = 1,
 158             .ifs = &desc_iface_high,
 159         },
 160     },
 161 };
 162
 163 static const USBDesc desc = {
 164     .id = {
 165         .idVendor          = 0,
 166         .idProduct         = 0,
 167         .bcdDevice         = 0,
 168         .iManufacturer     = STR_MANUFACTURER,
 169         .iProduct          = STR_PRODUCT,
 170         .iSerialNumber     = STR_SERIALNUMBER,
 171     },
 172     .full = &desc_device_full,
 173     .high = &desc_device_high,
 174     .str  = desc_strings,
 175 };
 176
 177 static void usb_msd_copy_data(MSDState *s, USBPacket *p)
 178 {
 179     uint32_t len;
 180     len = p->iov.size - p->result;
 181     if (len > s->scsi_len)
 182         len = s->scsi_len;
 183     usb_packet_copy(p, s->scsi_buf, len);
 184     s->scsi_len -= len;
 185     s->scsi_buf += len;
 186     s->data_len -= len;
 187     if (s->scsi_len == 0 || s->data_len == 0) {
 188         scsi_req_continue(s->req);
 189     }
 190 }
 191
 192 static void usb_msd_send_status(MSDState *s, USBPacket *p)
 193 {
 194     struct usb_msd_csw csw;
 195     int len;
 196
 197     csw.sig = cpu_to_le32(0x53425355);
 198     csw.tag = cpu_to_le32(s->tag);
 199     csw.residue = s->residue;
 200     csw.status = s->result;
 201
 202     len = MIN(sizeof(csw), p->iov.size);
 203     usb_packet_copy(p, &csw, len);
 204     p->result = len;
 205 }
 206
 207 static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len)
 208 {
 209     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 210     USBPacket *p = s->packet;
 211
 212     assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV));
 213     s->scsi_len = len;
 214     s->scsi_buf = scsi_req_get_buf(req);
 215     if (p) {
 216         usb_msd_copy_data(s, p);
 217         p = s->packet;
 218         if (p && p->result == p->iov.size) {
 219             /* Set s->packet to NULL before calling usb_packet_complete
 220                because another request may be issued before
 221                usb_packet_complete returns.  */
 222             DPRINTF("Packet complete %p\n", p);
 223             s->packet = NULL;
 224             usb_packet_complete(&s->dev, p);
 225         }
 226     }
 227 }
 228
 229 static void usb_msd_command_complete(SCSIRequest *req, uint32_t status)
 230 {
 231     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 232     USBPacket *p = s->packet;
 233
 234     DPRINTF("Command complete %d\n", status);
 235     s->residue = s->data_len;
 236     s->result = status != 0;
 237     if (s->packet) {
 238         if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
 239             /* A deferred packet with no write data remaining must be
 240                the status read packet.  */
 241             usb_msd_send_status(s, p);
 242             s->mode = USB_MSDM_CBW;
 243         } else {
 244             if (s->data_len) {
 245                 int len = (p->iov.size - p->result);
 246                 usb_packet_skip(p, len);
 247                 s->data_len -= len;
 248             }
 249             if (s->data_len == 0) {
 250                 s->mode = USB_MSDM_CSW;
 251             }
 252         }
 253         s->packet = NULL;
 254         usb_packet_complete(&s->dev, p);
 255     } else if (s->data_len == 0) {
 256         s->mode = USB_MSDM_CSW;
 257     }
 258     scsi_req_unref(req);
 259     s->req = NULL;
 260 }
 261
 262 static void usb_msd_request_cancelled(SCSIRequest *req)
 263 {
 264     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 265
 266     if (req == s->req) {
 267         scsi_req_unref(s->req);
 268         s->req = NULL;
 269         s->packet = NULL;
 270         s->scsi_len = 0;
 271     }
 272 }
 273
 274 static void usb_msd_handle_reset(USBDevice *dev)
 275 {
 276     MSDState *s = (MSDState *)dev;
 277
 278     DPRINTF("Reset\n");
 279     s->mode = USB_MSDM_CBW;
 280 }
 281
 282 static int usb_msd_handle_control(USBDevice *dev, USBPacket *p,
 283                int request, int value, int index, int length, uint8_t *data)
 284 {
 285     MSDState *s = (MSDState *)dev;
 286     int ret;
 287
 288     ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
 289     if (ret >= 0) {
 290         return ret;
 291     }
 292
 293     ret = 0;
 294     switch (request) {
 295     case DeviceRequest | USB_REQ_GET_INTERFACE:
 296         data[0] = 0;
 297         ret = 1;
 298         break;
 299     case DeviceOutRequest | USB_REQ_SET_INTERFACE:
 300         ret = 0;
 301         break;
 302     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 303         ret = 0;
 304         break;
 305     case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
 306         ret = 0;
 307         break;
 308         /* Class specific requests.  */
 309     case ClassInterfaceOutRequest | MassStorageReset:
 310         /* Reset state ready for the next CBW.  */
 311         s->mode = USB_MSDM_CBW;
 312         ret = 0;
 313         break;
 314     case ClassInterfaceRequest | GetMaxLun:
 315         data[0] = 0;
 316         ret = 1;
 317         break;
 318     default:
 319         ret = USB_RET_STALL;
 320         break;
 321     }
 322     return ret;
 323 }
 324
 325 static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p)
 326 {
 327     MSDState *s = DO_UPCAST(MSDState, dev, dev);
 328     scsi_req_cancel(s->req);
 329 }
 330
 331 static int usb_msd_handle_data(USBDevice *dev, USBPacket *p)
 332 {
 333     MSDState *s = (MSDState *)dev;
 334     int ret = 0;
 335     struct usb_msd_cbw cbw;
 336     uint8_t devep = p->devep;
 337
 338     switch (p->pid) {
 339     case USB_TOKEN_OUT:
 340         if (devep != 2)
 341             goto fail;
 342
 343         switch (s->mode) {
 344         case USB_MSDM_CBW:
 345             if (p->iov.size != 31) {
 346                 fprintf(stderr, "usb-msd: Bad CBW size");
 347                 goto fail;
 348             }
 349             usb_packet_copy(p, &cbw, 31);
 350             if (le32_to_cpu(cbw.sig) != 0x43425355) {
 351                 fprintf(stderr, "usb-msd: Bad signature %08x\n",
 352                         le32_to_cpu(cbw.sig));
 353                 goto fail;
 354             }
 355             DPRINTF("Command on LUN %d\n", cbw.lun);
 356             if (cbw.lun != 0) {
 357                 fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun);
 358                 goto fail;
 359             }
 360             s->tag = le32_to_cpu(cbw.tag);
 361             s->data_len = le32_to_cpu(cbw.data_len);
 362             if (s->data_len == 0) {
 363                 s->mode = USB_MSDM_CSW;
 364             } else if (cbw.flags & 0x80) {
 365                 s->mode = USB_MSDM_DATAIN;
 366             } else {
 367                 s->mode = USB_MSDM_DATAOUT;
 368             }
 369             DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
 370                     s->tag, cbw.flags, cbw.cmd_len, s->data_len);
 371             s->residue = 0;
 372             s->scsi_len = 0;
 373             s->req = scsi_req_new(s->scsi_dev, s->tag, 0, cbw.cmd, NULL);
 374             scsi_req_enqueue(s->req);
 375             /* ??? Should check that USB and SCSI data transfer
 376                directions match.  */
 377             if (s->mode != USB_MSDM_CSW && s->residue == 0) {
 378                 scsi_req_continue(s->req);
 379             }
 380             ret = p->result;
 381             break;
 382
 383         case USB_MSDM_DATAOUT:
 384             DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len);
 385             if (p->iov.size > s->data_len) {
 386                 goto fail;
 387             }
 388
 389             if (s->scsi_len) {
 390                 usb_msd_copy_data(s, p);
 391             }
 392             if (s->residue) {
 393                 int len = p->iov.size - p->result;
 394                 if (len) {
 395                     usb_packet_skip(p, len);
 396                     s->data_len -= len;
 397                     if (s->data_len == 0) {
 398                         s->mode = USB_MSDM_CSW;
 399                     }
 400                 }
 401             }
 402             if (p->result < p->iov.size) {
 403                 DPRINTF("Deferring packet %p\n", p);
 404                 s->packet = p;
 405                 ret = USB_RET_ASYNC;
 406             } else {
 407                 ret = p->result;
 408             }
 409             break;
 410
 411         default:
 412             DPRINTF("Unexpected write (len %zd)\n", p->iov.size);
 413             goto fail;
 414         }
 415         break;
 416
 417     case USB_TOKEN_IN:
 418         if (devep != 1)
 419             goto fail;
 420
 421         switch (s->mode) {
 422         case USB_MSDM_DATAOUT:
 423             if (s->data_len != 0 || p->iov.size < 13) {
 424                 goto fail;
 425             }
 426             /* Waiting for SCSI write to complete.  */
 427             s->packet = p;
 428             ret = USB_RET_ASYNC;
 429             break;
 430
 431         case USB_MSDM_CSW:
 432             DPRINTF("Command status %d tag 0x%x, len %zd\n",
 433                     s->result, s->tag, p->iov.size);
 434             if (p->iov.size < 13) {
 435                 goto fail;
 436             }
 437
 438             usb_msd_send_status(s, p);
 439             s->mode = USB_MSDM_CBW;
 440             ret = 13;
 441             break;
 442
 443         case USB_MSDM_DATAIN:
 444             DPRINTF("Data in %zd/%d, scsi_len %d\n",
 445                     p->iov.size, s->data_len, s->scsi_len);
 446             if (s->scsi_len) {
 447                 usb_msd_copy_data(s, p);
 448             }
 449             if (s->residue) {
 450                 int len = p->iov.size - p->result;
 451                 if (len) {
 452                     usb_packet_skip(p, len);
 453                     s->data_len -= len;
 454                     if (s->data_len == 0) {
 455                         s->mode = USB_MSDM_CSW;
 456                     }
 457                 }
 458             }
 459             if (p->result < p->iov.size) {
 460                 DPRINTF("Deferring packet %p\n", p);
 461                 s->packet = p;
 462                 ret = USB_RET_ASYNC;
 463             } else {
 464                 ret = p->result;
 465             }
 466             break;
 467
 468         default:
 469             DPRINTF("Unexpected read (len %zd)\n", p->iov.size);
 470             goto fail;
 471         }
 472         break;
 473
 474     default:
 475         DPRINTF("Bad token\n");
 476     fail:
 477         ret = USB_RET_STALL;
 478         break;
 479     }
 480
 481     return ret;
 482 }
 483
 484 static void usb_msd_password_cb(void *opaque, int err)
 485 {
 486     MSDState *s = opaque;
 487
 488     if (!err)
 489         err = usb_device_attach(&s->dev);
 490
 491     if (err)
 492         qdev_unplug(&s->dev.qdev);
 493 }
 494
 495 static const struct SCSIBusOps usb_msd_scsi_ops = {
 496     .transfer_data = usb_msd_transfer_data,
 497     .complete = usb_msd_command_complete,
 498     .cancel = usb_msd_request_cancelled
 499 };
 500
 501 static int usb_msd_initfn(USBDevice *dev)
 502 {
 503     MSDState *s = DO_UPCAST(MSDState, dev, dev);
 504     BlockDriverState *bs = s->conf.bs;
 505     DriveInfo *dinfo;
 506
 507     if (!bs) {
 508         error_report("usb-msd: drive property not set");
 509         return -1;
 510     }
 511
 512     /*
 513      * Hack alert: this pretends to be a block device, but it's really
 514      * a SCSI bus that can serve only a single device, which it
 515      * creates automatically.  But first it needs to detach from its
 516      * blockdev, or else scsi_bus_legacy_add_drive() dies when it
 517      * attaches again.
 518      *
 519      * The hack is probably a bad idea.
 520      */
 521     bdrv_detach(bs, &s->dev.qdev);
 522     s->conf.bs = NULL;
 523
 524     if (!s->serial) {
 525         /* try to fall back to value set with legacy -drive serial=... */
 526         dinfo = drive_get_by_blockdev(bs);
 527         if (*dinfo->serial) {
 528             s->serial = strdup(dinfo->serial);
 529         }
 530     }
 531     if (s->serial) {
 532         usb_desc_set_string(dev, STR_SERIALNUMBER, s->serial);
 533     }
 534
 535     usb_desc_init(dev);
 536     scsi_bus_new(&s->bus, &s->dev.qdev, 0, 1, &usb_msd_scsi_ops);
 537     s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, bs, 0, !!s->removable);
 538     if (!s->scsi_dev) {
 539         return -1;
 540     }
 541     s->bus.qbus.allow_hotplug = 0;
 542     usb_msd_handle_reset(dev);
 543
 544     if (bdrv_key_required(bs)) {
 545         if (cur_mon) {
 546             monitor_read_bdrv_key_start(cur_mon, bs, usb_msd_password_cb, s);
 547             s->dev.auto_attach = 0;
 548         } else {
 549             autostart = 0;
 550         }
 551     }
 552
 553     add_boot_device_path(s->conf.bootindex, &dev->qdev, "/disk@0,0");
 554     return 0;
 555 }
 556
 557 static USBDevice *usb_msd_init(const char *filename)
 558 {
 559     static int nr=0;
 560     char id[8];
 561     QemuOpts *opts;
 562     DriveInfo *dinfo;
 563     USBDevice *dev;
 564     const char *p1;
 565     char fmt[32];
 566
 567     /* parse -usbdevice disk: syntax into drive opts */
 568     snprintf(id, sizeof(id), "usb%d", nr++);
 569     opts = qemu_opts_create(qemu_find_opts("drive"), id, 0);
 570
 571     p1 = strchr(filename, ':');
 572     if (p1++) {
 573         const char *p2;
 574
 575         if (strstart(filename, "format=", &p2)) {
 576             int len = MIN(p1 - p2, sizeof(fmt));
 577             pstrcpy(fmt, len, p2);
 578             qemu_opt_set(opts, "format", fmt);
 579         } else if (*filename != ':') {
 580             printf("unrecognized USB mass-storage option %s\n", filename);
 581             return NULL;
 582         }
 583         filename = p1;
 584     }
 585     if (!*filename) {
 586         printf("block device specification needed\n");
 587         return NULL;
 588     }
 589     qemu_opt_set(opts, "file", filename);
 590     qemu_opt_set(opts, "if", "none");
 591
 592     /* create host drive */
 593     dinfo = drive_init(opts, 0);
 594     if (!dinfo) {
 595         qemu_opts_del(opts);
 596         return NULL;
 597     }
 598
 599     /* create guest device */
 600     dev = usb_create(NULL /* FIXME */, "usb-storage");
 601     if (!dev) {
 602         return NULL;
 603     }
 604     if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
 605         qdev_free(&dev->qdev);
 606         return NULL;
 607     }
 608     if (qdev_init(&dev->qdev) < 0)
 609         return NULL;
 610
 611     return dev;
 612 }
 613
 614 static const VMStateDescription vmstate_usb_msd = {
 615     .name = "usb-storage",
 616     .unmigratable = 1, /* FIXME: handle transactions which are in flight */
 617     .version_id = 1,
 618     .minimum_version_id = 1,
 619     .fields = (VMStateField []) {
 620         VMSTATE_USB_DEVICE(dev, MSDState),
 621         VMSTATE_END_OF_LIST()
 622     }
 623 };
 624
 625 static struct USBDeviceInfo msd_info = {
 626     .product_desc   = "QEMU USB MSD",
 627     .qdev.name      = "usb-storage",
 628     .qdev.fw_name      = "storage",
 629     .qdev.size      = sizeof(MSDState),
 630     .qdev.vmsd      = &vmstate_usb_msd,
 631     .usb_desc       = &desc,
 632     .init           = usb_msd_initfn,
 633     .handle_packet  = usb_generic_handle_packet,
 634     .cancel_packet  = usb_msd_cancel_io,
 635     .handle_attach  = usb_desc_attach,
 636     .handle_reset   = usb_msd_handle_reset,
 637     .handle_control = usb_msd_handle_control,
 638     .handle_data    = usb_msd_handle_data,
 639     .usbdevice_name = "disk",
 640     .usbdevice_init = usb_msd_init,
 641     .qdev.props     = (Property[]) {
 642         DEFINE_BLOCK_PROPERTIES(MSDState, conf),
 643         DEFINE_PROP_STRING("serial", MSDState, serial),
 644         DEFINE_PROP_BIT("removable", MSDState, removable, 0, false),
 645         DEFINE_PROP_END_OF_LIST(),
 646     },
 647 };
 648
 649 static void usb_msd_register_devices(void)
 650 {
 651     usb_qdev_register(&msd_info);
 652 }
 653 device_init(usb_msd_register_devices)