hw/arm11mpcore.c

   1 /*
   2  * ARM11MPCore internal peripheral emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 /* ??? The MPCore TRM says the on-chip controller has 224 external IRQ lines
  11    (+ 32 internal).  However my test chip only exposes/reports 32.
  12    More importantly Linux falls over if more than 32 are present!  */
  13 #define GIC_NIRQ 64
  14 #include "mpcore.c"
  15
  16 /* Dummy PIC to route IRQ lines.  The baseboard has 4 independent IRQ
  17    controllers.  The output of these, plus some of the raw input lines
  18    are fed into a single SMP-aware interrupt controller on the CPU.  */
  19 typedef struct {
  20     SysBusDevice busdev;
  21     SysBusDevice *priv;
  22     qemu_irq cpuic[32];
  23     qemu_irq rvic[4][64];
  24     uint32_t num_cpu;
  25 } mpcore_rirq_state;
  26
  27 /* Map baseboard IRQs onto CPU IRQ lines.  */
  28 static const int mpcore_irq_map[32] = {
  29     -1, -1, -1, -1,  1,  2, -1, -1,
  30     -1, -1,  6, -1,  4,  5, -1, -1,
  31     -1, 14, 15,  0,  7,  8, -1, -1,
  32     -1, -1, -1, -1,  9,  3, -1, -1,
  33 };
  34
  35 static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
  36 {
  37     mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
  38     int i;
  39
  40     for (i = 0; i < 4; i++) {
  41         qemu_set_irq(s->rvic[i][irq], level);
  42     }
  43     if (irq < 32) {
  44         irq = mpcore_irq_map[irq];
  45         if (irq >= 0) {
  46             qemu_set_irq(s->cpuic[irq], level);
  47         }
  48     }
  49 }
  50
  51 static void mpcore_rirq_map(SysBusDevice *dev, target_phys_addr_t base)
  52 {
  53     mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
  54     sysbus_mmio_map(s->priv, 0, base);
  55 }
  56
  57 static int realview_mpcore_init(SysBusDevice *dev)
  58 {
  59     mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
  60     DeviceState *gic;
  61     DeviceState *priv;
  62     int n;
  63     int i;
  64
  65     priv = qdev_create(NULL, "arm11mpcore_priv");
  66     qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
  67     qdev_init_nofail(priv);
  68     s->priv = sysbus_from_qdev(priv);
  69     sysbus_pass_irq(dev, s->priv);
  70     for (i = 0; i < 32; i++) {
  71         s->cpuic[i] = qdev_get_gpio_in(priv, i);
  72     }
  73     /* ??? IRQ routing is hardcoded to "normal" mode.  */
  74     for (n = 0; n < 4; n++) {
  75         gic = sysbus_create_simple("realview_gic", 0x10040000 + n * 0x10000,
  76                                    s->cpuic[10 + n]);
  77         for (i = 0; i < 64; i++) {
  78             s->rvic[n][i] = qdev_get_gpio_in(gic, i);
  79         }
  80     }
  81     qdev_init_gpio_in(&dev->qdev, mpcore_rirq_set_irq, 64);
  82     sysbus_init_mmio_cb(dev, 0x2000, mpcore_rirq_map);
  83     return 0;
  84 }
  85
  86 static SysBusDeviceInfo mpcore_rirq_info = {
  87     .init = realview_mpcore_init,
  88     .qdev.name  = "realview_mpcore",
  89     .qdev.size  = sizeof(mpcore_rirq_state),
  90     .qdev.props = (Property[]) {
  91         DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
  92         DEFINE_PROP_END_OF_LIST(),
  93     }
  94 };
  95
  96 static SysBusDeviceInfo mpcore_priv_info = {
  97     .init = mpcore_priv_init,
  98     .qdev.name  = "arm11mpcore_priv",
  99     .qdev.size  = sizeof(mpcore_priv_state),
 100     .qdev.props = (Property[]) {
 101         DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
 102         DEFINE_PROP_END_OF_LIST(),
 103     }
 104 };
 105
 106 static void arm11mpcore_register_devices(void)
 107 {
 108     sysbus_register_withprop(&mpcore_rirq_info);
 109     sysbus_register_withprop(&mpcore_priv_info);
 110 }
 111
 112 device_init(arm11mpcore_register_devices)