hw/max111x.c

   1 /*
   2  * Maxim MAX1110/1111 ADC chip emulation.
   3  *
   4  * Copyright (c) 2006 Openedhand Ltd.
   5  * Written by Andrzej Zaborowski <balrog@zabor.org>
   6  *
   7  * This code is licensed under the GNU GPLv2.
   8  */
   9
  10 #include "ssi.h"
  11
  12 typedef struct {
  13     SSISlave ssidev;
  14     qemu_irq interrupt;
  15     uint8_t tb1, rb2, rb3;
  16     int cycle;
  17
  18     uint8_t input[8];
  19     int inputs, com;
  20 } MAX111xState;
  21
  22 /* Control-byte bitfields */
  23 #define CB_PD0          (1 << 0)
  24 #define CB_PD1          (1 << 1)
  25 #define CB_SGL          (1 << 2)
  26 #define CB_UNI          (1 << 3)
  27 #define CB_SEL0         (1 << 4)
  28 #define CB_SEL1         (1 << 5)
  29 #define CB_SEL2         (1 << 6)
  30 #define CB_START        (1 << 7)
  31
  32 #define CHANNEL_NUM(v, b0, b1, b2)      \
  33                         ((((v) >> (2 + (b0))) & 4) |    \
  34                          (((v) >> (3 + (b1))) & 2) |    \
  35                          (((v) >> (4 + (b2))) & 1))
  36
  37 static uint32_t max111x_read(MAX111xState *s)
  38 {
  39     if (!s->tb1)
  40         return 0;
  41
  42     switch (s->cycle ++) {
  43     case 1:
  44         return s->rb2;
  45     case 2:
  46         return s->rb3;
  47     }
  48
  49     return 0;
  50 }
  51
  52 /* Interpret a control-byte */
  53 static void max111x_write(MAX111xState *s, uint32_t value)
  54 {
  55     int measure, chan;
  56
  57     /* Ignore the value if START bit is zero */
  58     if (!(value & CB_START))
  59         return;
  60
  61     s->cycle = 0;
  62
  63     if (!(value & CB_PD1)) {
  64         s->tb1 = 0;
  65         return;
  66     }
  67
  68     s->tb1 = value;
  69
  70     if (s->inputs == 8)
  71         chan = CHANNEL_NUM(value, 1, 0, 2);
  72     else
  73         chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2);
  74
  75     if (value & CB_SGL)
  76         measure = s->input[chan] - s->com;
  77     else
  78         measure = s->input[chan] - s->input[chan ^ 1];
  79
  80     if (!(value & CB_UNI))
  81         measure ^= 0x80;
  82
  83     s->rb2 = (measure >> 2) & 0x3f;
  84     s->rb3 = (measure << 6) & 0xc0;
  85
  86     /* FIXME: When should the IRQ be lowered?  */
  87     qemu_irq_raise(s->interrupt);
  88 }
  89
  90 static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
  91 {
  92     MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
  93     max111x_write(s, value);
  94     return max111x_read(s);
  95 }
  96
  97 static const VMStateDescription vmstate_max111x = {
  98     .name = "max111x",
  99     .version_id = 0,
 100     .minimum_version_id = 0,
 101     .minimum_version_id_old = 0,
 102     .fields      = (VMStateField[]) {
 103         VMSTATE_UINT8(tb1, MAX111xState),
 104         VMSTATE_UINT8(rb2, MAX111xState),
 105         VMSTATE_UINT8(rb3, MAX111xState),
 106         VMSTATE_INT32_EQUAL(inputs, MAX111xState),
 107         VMSTATE_INT32(com, MAX111xState),
 108         VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs,
 109                                    vmstate_info_uint8, uint8_t),
 110         VMSTATE_END_OF_LIST()
 111     }
 112 };
 113
 114 static int max111x_init(SSISlave *dev, int inputs)
 115 {
 116     MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
 117
 118     qdev_init_gpio_out(&dev->qdev, &s->interrupt, 1);
 119
 120     s->inputs = inputs;
 121     /* TODO: add a user interface for setting these */
 122     s->input[0] = 0xf0;
 123     s->input[1] = 0xe0;
 124     s->input[2] = 0xd0;
 125     s->input[3] = 0xc0;
 126     s->input[4] = 0xb0;
 127     s->input[5] = 0xa0;
 128     s->input[6] = 0x90;
 129     s->input[7] = 0x80;
 130     s->com = 0;
 131
 132     vmstate_register(&dev->qdev, -1, &vmstate_max111x, s);
 133     return 0;
 134 }
 135
 136 static int max1110_init(SSISlave *dev)
 137 {
 138     return max111x_init(dev, 8);
 139 }
 140
 141 static int max1111_init(SSISlave *dev)
 142 {
 143     return max111x_init(dev, 4);
 144 }
 145
 146 void max111x_set_input(DeviceState *dev, int line, uint8_t value)
 147 {
 148     MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, SSI_SLAVE_FROM_QDEV(dev));
 149     assert(line >= 0 && line < s->inputs);
 150     s->input[line] = value;
 151 }
 152
 153 static SSISlaveInfo max1110_info = {
 154     .qdev.name = "max1110",
 155     .qdev.size = sizeof(MAX111xState),
 156     .init = max1110_init,
 157     .transfer = max111x_transfer
 158 };
 159
 160 static SSISlaveInfo max1111_info = {
 161     .qdev.name = "max1111",
 162     .qdev.size = sizeof(MAX111xState),
 163     .init = max1111_init,
 164     .transfer = max111x_transfer
 165 };
 166
 167 static void max111x_register_devices(void)
 168 {
 169     ssi_register_slave(&max1110_info);
 170     ssi_register_slave(&max1111_info);
 171 }
 172
 173 device_init(max111x_register_devices)