?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
libqtest: Inline g_assert_no_errno()
[qemu/armbru.git] / hw / ssi / aspeed_smc.c
blob1270842dcf0c45cce509c27074143b340c905dd5
1 /*
2 * ASPEED AST2400 SMC Controller (SPI Flash Only)
3 *
4 * Copyright (C) 2016 IBM Corp.
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24
25 #include "qemu/osdep.h"
26 #include "hw/sysbus.h"
27 #include "sysemu/sysemu.h"
28 #include "qemu/log.h"
29 #include "qemu/error-report.h"
30
31 #include "hw/ssi/aspeed_smc.h"
32
33 /* CE Type Setting Register */
34 #define R_CONF (0x00 / 4)
35 #define CONF_LEGACY_DISABLE (1 << 31)
36 #define CONF_ENABLE_W4 20
37 #define CONF_ENABLE_W3 19
38 #define CONF_ENABLE_W2 18
39 #define CONF_ENABLE_W1 17
40 #define CONF_ENABLE_W0 16
41 #define CONF_FLASH_TYPE4 8
42 #define CONF_FLASH_TYPE3 6
43 #define CONF_FLASH_TYPE2 4
44 #define CONF_FLASH_TYPE1 2
45 #define CONF_FLASH_TYPE0 0
46 #define CONF_FLASH_TYPE_NOR 0x0
47 #define CONF_FLASH_TYPE_NAND 0x1
48 #define CONF_FLASH_TYPE_SPI 0x2
49
50 /* CE Control Register */
51 #define R_CE_CTRL (0x04 / 4)
52 #define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */
53 #define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */
54 #define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */
55 #define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */
56 #define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */
57
58 /* Interrupt Control and Status Register */
59 #define R_INTR_CTRL (0x08 / 4)
60 #define INTR_CTRL_DMA_STATUS (1 << 11)
61 #define INTR_CTRL_CMD_ABORT_STATUS (1 << 10)
62 #define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9)
63 #define INTR_CTRL_DMA_EN (1 << 3)
64 #define INTR_CTRL_CMD_ABORT_EN (1 << 2)
65 #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1)
66
67 /* CEx Control Register */
68 #define R_CTRL0 (0x10 / 4)
69 #define CTRL_IO_DUAL_DATA (1 << 29)
70 #define CTRL_IO_DUAL_ADDR_DATA (1 << 28) /* Includes dummies */
71 #define CTRL_CMD_SHIFT 16
72 #define CTRL_CMD_MASK 0xff
73 #define CTRL_DUMMY_HIGH_SHIFT 14
74 #define CTRL_AST2400_SPI_4BYTE (1 << 13)
75 #define CTRL_DUMMY_LOW_SHIFT 6 /* 2 bits [7:6] */
76 #define CTRL_CE_STOP_ACTIVE (1 << 2)
77 #define CTRL_CMD_MODE_MASK 0x3
78 #define CTRL_READMODE 0x0
79 #define CTRL_FREADMODE 0x1
80 #define CTRL_WRITEMODE 0x2
81 #define CTRL_USERMODE 0x3
82 #define R_CTRL1 (0x14 / 4)
83 #define R_CTRL2 (0x18 / 4)
84 #define R_CTRL3 (0x1C / 4)
85 #define R_CTRL4 (0x20 / 4)
86
87 /* CEx Segment Address Register */
88 #define R_SEG_ADDR0 (0x30 / 4)
89 #define SEG_END_SHIFT 24 /* 8MB units */
90 #define SEG_END_MASK 0xff
91 #define SEG_START_SHIFT 16 /* address bit [A29-A23] */
92 #define SEG_START_MASK 0xff
93 #define R_SEG_ADDR1 (0x34 / 4)
94 #define R_SEG_ADDR2 (0x38 / 4)
95 #define R_SEG_ADDR3 (0x3C / 4)
96 #define R_SEG_ADDR4 (0x40 / 4)
97
98 /* Misc Control Register #1 */
99 #define R_MISC_CTRL1 (0x50 / 4)
100
101 /* Misc Control Register #2 */
102 #define R_MISC_CTRL2 (0x54 / 4)
103
104 /* DMA Control/Status Register */
105 #define R_DMA_CTRL (0x80 / 4)
106 #define DMA_CTRL_DELAY_MASK 0xf
107 #define DMA_CTRL_DELAY_SHIFT 8
108 #define DMA_CTRL_FREQ_MASK 0xf
109 #define DMA_CTRL_FREQ_SHIFT 4
110 #define DMA_CTRL_MODE (1 << 3)
111 #define DMA_CTRL_CKSUM (1 << 2)
112 #define DMA_CTRL_DIR (1 << 1)
113 #define DMA_CTRL_EN (1 << 0)
114
115 /* DMA Flash Side Address */
116 #define R_DMA_FLASH_ADDR (0x84 / 4)
117
118 /* DMA DRAM Side Address */
119 #define R_DMA_DRAM_ADDR (0x88 / 4)
120
121 /* DMA Length Register */
122 #define R_DMA_LEN (0x8C / 4)
123
124 /* Checksum Calculation Result */
125 #define R_DMA_CHECKSUM (0x90 / 4)
126
127 /* Misc Control Register #2 */
128 #define R_TIMINGS (0x94 / 4)
129
130 /* SPI controller registers and bits */
131 #define R_SPI_CONF (0x00 / 4)
132 #define SPI_CONF_ENABLE_W0 0
133 #define R_SPI_CTRL0 (0x4 / 4)
134 #define R_SPI_MISC_CTRL (0x10 / 4)
135 #define R_SPI_TIMINGS (0x14 / 4)
136
137 #define ASPEED_SMC_R_SPI_MAX (0x20 / 4)
138 #define ASPEED_SMC_R_SMC_MAX (0x20 / 4)
139
140 #define ASPEED_SOC_SMC_FLASH_BASE 0x10000000
141 #define ASPEED_SOC_FMC_FLASH_BASE 0x20000000
142 #define ASPEED_SOC_SPI_FLASH_BASE 0x30000000
143 #define ASPEED_SOC_SPI2_FLASH_BASE 0x38000000
144
145 /* Flash opcodes. */
146 #define SPI_OP_READ 0x03 /* Read data bytes (low frequency) */
147
148 /*
149 * Default segments mapping addresses and size for each slave per
150 * controller. These can be changed when board is initialized with the
151 * Segment Address Registers.
152 */
153 static const AspeedSegments aspeed_segments_legacy[] = {
154 { 0x10000000, 32 * 1024 * 1024 },
155 };
156
157 static const AspeedSegments aspeed_segments_fmc[] = {
158 { 0x20000000, 64 * 1024 * 1024 }, /* start address is readonly */
159 { 0x24000000, 32 * 1024 * 1024 },
160 { 0x26000000, 32 * 1024 * 1024 },
161 { 0x28000000, 32 * 1024 * 1024 },
162 { 0x2A000000, 32 * 1024 * 1024 }
163 };
164
165 static const AspeedSegments aspeed_segments_spi[] = {
166 { 0x30000000, 64 * 1024 * 1024 },
167 };
168
169 static const AspeedSegments aspeed_segments_ast2500_fmc[] = {
170 { 0x20000000, 128 * 1024 * 1024 }, /* start address is readonly */
171 { 0x28000000, 32 * 1024 * 1024 },
172 { 0x2A000000, 32 * 1024 * 1024 },
173 };
174
175 static const AspeedSegments aspeed_segments_ast2500_spi1[] = {
176 { 0x30000000, 32 * 1024 * 1024 }, /* start address is readonly */
177 { 0x32000000, 96 * 1024 * 1024 }, /* end address is readonly */
178 };
179
180 static const AspeedSegments aspeed_segments_ast2500_spi2[] = {
181 { 0x38000000, 32 * 1024 * 1024 }, /* start address is readonly */
182 { 0x3A000000, 96 * 1024 * 1024 }, /* end address is readonly */
183 };
184
185 static const AspeedSMCController controllers[] = {
186 {
187 .name = "aspeed.smc.smc",
188 .r_conf = R_CONF,
189 .r_ce_ctrl = R_CE_CTRL,
190 .r_ctrl0 = R_CTRL0,
191 .r_timings = R_TIMINGS,
192 .conf_enable_w0 = CONF_ENABLE_W0,
193 .max_slaves = 5,
194 .segments = aspeed_segments_legacy,
195 .flash_window_base = ASPEED_SOC_SMC_FLASH_BASE,
196 .flash_window_size = 0x6000000,
197 .has_dma = false,
198 .nregs = ASPEED_SMC_R_SMC_MAX,
199 }, {
200 .name = "aspeed.smc.fmc",
201 .r_conf = R_CONF,
202 .r_ce_ctrl = R_CE_CTRL,
203 .r_ctrl0 = R_CTRL0,
204 .r_timings = R_TIMINGS,
205 .conf_enable_w0 = CONF_ENABLE_W0,
206 .max_slaves = 5,
207 .segments = aspeed_segments_fmc,
208 .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE,
209 .flash_window_size = 0x10000000,
210 .has_dma = true,
211 .nregs = ASPEED_SMC_R_MAX,
212 }, {
213 .name = "aspeed.smc.spi",
214 .r_conf = R_SPI_CONF,
215 .r_ce_ctrl = 0xff,
216 .r_ctrl0 = R_SPI_CTRL0,
217 .r_timings = R_SPI_TIMINGS,
218 .conf_enable_w0 = SPI_CONF_ENABLE_W0,
219 .max_slaves = 1,
220 .segments = aspeed_segments_spi,
221 .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE,
222 .flash_window_size = 0x10000000,
223 .has_dma = false,
224 .nregs = ASPEED_SMC_R_SPI_MAX,
225 }, {
226 .name = "aspeed.smc.ast2500-fmc",
227 .r_conf = R_CONF,
228 .r_ce_ctrl = R_CE_CTRL,
229 .r_ctrl0 = R_CTRL0,
230 .r_timings = R_TIMINGS,
231 .conf_enable_w0 = CONF_ENABLE_W0,
232 .max_slaves = 3,
233 .segments = aspeed_segments_ast2500_fmc,
234 .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE,
235 .flash_window_size = 0x10000000,
236 .has_dma = true,
237 .nregs = ASPEED_SMC_R_MAX,
238 }, {
239 .name = "aspeed.smc.ast2500-spi1",
240 .r_conf = R_CONF,
241 .r_ce_ctrl = R_CE_CTRL,
242 .r_ctrl0 = R_CTRL0,
243 .r_timings = R_TIMINGS,
244 .conf_enable_w0 = CONF_ENABLE_W0,
245 .max_slaves = 2,
246 .segments = aspeed_segments_ast2500_spi1,
247 .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE,
248 .flash_window_size = 0x8000000,
249 .has_dma = false,
250 .nregs = ASPEED_SMC_R_MAX,
251 }, {
252 .name = "aspeed.smc.ast2500-spi2",
253 .r_conf = R_CONF,
254 .r_ce_ctrl = R_CE_CTRL,
255 .r_ctrl0 = R_CTRL0,
256 .r_timings = R_TIMINGS,
257 .conf_enable_w0 = CONF_ENABLE_W0,
258 .max_slaves = 2,
259 .segments = aspeed_segments_ast2500_spi2,
260 .flash_window_base = ASPEED_SOC_SPI2_FLASH_BASE,
261 .flash_window_size = 0x8000000,
262 .has_dma = false,
263 .nregs = ASPEED_SMC_R_MAX,
264 },
265 };
266
267 /*
268 * The Segment Register uses a 8MB unit to encode the start address
269 * and the end address of the mapping window of a flash SPI slave :
270 *
271 * | byte 1 | byte 2 | byte 3 | byte 4 |
272 * +--------+--------+--------+--------+
273 * | end | start | 0 | 0 |
274 *
275 */
276 static inline uint32_t aspeed_smc_segment_to_reg(const AspeedSegments *seg)
277 {
278 uint32_t reg = 0;
279 reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT;
280 reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT;
281 return reg;
282 }
283
284 static inline void aspeed_smc_reg_to_segment(uint32_t reg, AspeedSegments *seg)
285 {
286 seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23;
287 seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr;
288 }
289
290 static bool aspeed_smc_flash_overlap(const AspeedSMCState *s,
291 const AspeedSegments *new,
292 int cs)
293 {
294 AspeedSegments seg;
295 int i;
296
297 for (i = 0; i < s->ctrl->max_slaves; i++) {
298 if (i == cs) {
299 continue;
300 }
301
302 aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + i], &seg);
303
304 if (new->addr + new->size > seg.addr &&
305 new->addr < seg.addr + seg.size) {
306 qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment CS%d [ 0x%"
307 HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with "
308 "CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
309 s->ctrl->name, cs, new->addr, new->addr + new->size,
310 i, seg.addr, seg.addr + seg.size);
311 return true;
312 }
313 }
314 return false;
315 }
316
317 static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs,
318 uint64_t new)
319 {
320 AspeedSMCFlash *fl = &s->flashes[cs];
321 AspeedSegments seg;
322
323 aspeed_smc_reg_to_segment(new, &seg);
324
325 /* The start address of CS0 is read-only */
326 if (cs == 0 && seg.addr != s->ctrl->flash_window_base) {
327 qemu_log_mask(LOG_GUEST_ERROR,
328 "%s: Tried to change CS0 start address to 0x%"
329 HWADDR_PRIx "\n", s->ctrl->name, seg.addr);
330 seg.addr = s->ctrl->flash_window_base;
331 new = aspeed_smc_segment_to_reg(&seg);
332 }
333
334 /*
335 * The end address of the AST2500 spi controllers is also
336 * read-only.
337 */
338 if ((s->ctrl->segments == aspeed_segments_ast2500_spi1 ||
339 s->ctrl->segments == aspeed_segments_ast2500_spi2) &&
340 cs == s->ctrl->max_slaves &&
341 seg.addr + seg.size != s->ctrl->segments[cs].addr +
342 s->ctrl->segments[cs].size) {
343 qemu_log_mask(LOG_GUEST_ERROR,
344 "%s: Tried to change CS%d end address to 0x%"
345 HWADDR_PRIx "\n", s->ctrl->name, cs, seg.addr + seg.size);
346 seg.size = s->ctrl->segments[cs].addr + s->ctrl->segments[cs].size -
347 seg.addr;
348 new = aspeed_smc_segment_to_reg(&seg);
349 }
350
351 /* Keep the segment in the overall flash window */
352 if (seg.addr + seg.size <= s->ctrl->flash_window_base ||
353 seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size) {
354 qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is invalid : "
355 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
356 s->ctrl->name, cs, seg.addr, seg.addr + seg.size);
357 return;
358 }
359
360 /* Check start address vs. alignment */
361 if (seg.size && !QEMU_IS_ALIGNED(seg.addr, seg.size)) {
362 qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is not "
363 "aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
364 s->ctrl->name, cs, seg.addr, seg.addr + seg.size);
365 }
366
367 /* And segments should not overlap (in the specs) */
368 aspeed_smc_flash_overlap(s, &seg, cs);
369
370 /* All should be fine now to move the region */
371 memory_region_transaction_begin();
372 memory_region_set_size(&fl->mmio, seg.size);
373 memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base);
374 memory_region_set_enabled(&fl->mmio, true);
375 memory_region_transaction_commit();
376
377 s->regs[R_SEG_ADDR0 + cs] = new;
378 }
379
380 static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr,
381 unsigned size)
382 {
383 qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u"
384 PRIx64 "\n", __func__, addr, size);
385 return 0;
386 }
387
388 static void aspeed_smc_flash_default_write(void *opaque, hwaddr addr,
389 uint64_t data, unsigned size)
390 {
391 qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u: 0x%"
392 PRIx64 "\n", __func__, addr, size, data);
393 }
394
395 static const MemoryRegionOps aspeed_smc_flash_default_ops = {
396 .read = aspeed_smc_flash_default_read,
397 .write = aspeed_smc_flash_default_write,
398 .endianness = DEVICE_LITTLE_ENDIAN,
399 .valid = {
400 .min_access_size = 1,
401 .max_access_size = 4,
402 },
403 };
404
405 static inline int aspeed_smc_flash_mode(const AspeedSMCFlash *fl)
406 {
407 const AspeedSMCState *s = fl->controller;
408
409 return s->regs[s->r_ctrl0 + fl->id] & CTRL_CMD_MODE_MASK;
410 }
411
412 static inline bool aspeed_smc_is_writable(const AspeedSMCFlash *fl)
413 {
414 const AspeedSMCState *s = fl->controller;
415
416 return s->regs[s->r_conf] & (1 << (s->conf_enable_w0 + fl->id));
417 }
418
419 static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl)
420 {
421 const AspeedSMCState *s = fl->controller;
422 int cmd = (s->regs[s->r_ctrl0 + fl->id] >> CTRL_CMD_SHIFT) & CTRL_CMD_MASK;
423
424 /* In read mode, the default SPI command is READ (0x3). In other
425 * modes, the command should necessarily be defined */
426 if (aspeed_smc_flash_mode(fl) == CTRL_READMODE) {
427 cmd = SPI_OP_READ;
428 }
429
430 if (!cmd) {
431 qemu_log_mask(LOG_GUEST_ERROR, "%s: no command defined for mode %d\n",
432 __func__, aspeed_smc_flash_mode(fl));
433 }
434
435 return cmd;
436 }
437
438 static inline int aspeed_smc_flash_is_4byte(const AspeedSMCFlash *fl)
439 {
440 const AspeedSMCState *s = fl->controller;
441
442 if (s->ctrl->segments == aspeed_segments_spi) {
443 return s->regs[s->r_ctrl0] & CTRL_AST2400_SPI_4BYTE;
444 } else {
445 return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->id));
446 }
447 }
448
449 static inline bool aspeed_smc_is_ce_stop_active(const AspeedSMCFlash *fl)
450 {
451 const AspeedSMCState *s = fl->controller;
452
453 return s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE;
454 }
455
456 static void aspeed_smc_flash_select(AspeedSMCFlash *fl)
457 {
458 AspeedSMCState *s = fl->controller;
459
460 s->regs[s->r_ctrl0 + fl->id] &= ~CTRL_CE_STOP_ACTIVE;
461 qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl));
462 }
463
464 static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl)
465 {
466 AspeedSMCState *s = fl->controller;
467
468 s->regs[s->r_ctrl0 + fl->id] |= CTRL_CE_STOP_ACTIVE;
469 qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl));
470 }
471
472 static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl,
473 uint32_t addr)
474 {
475 const AspeedSMCState *s = fl->controller;
476 AspeedSegments seg;
477
478 aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + fl->id], &seg);
479 if ((addr % seg.size) != addr) {
480 qemu_log_mask(LOG_GUEST_ERROR,
481 "%s: invalid address 0x%08x for CS%d segment : "
482 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
483 s->ctrl->name, addr, fl->id, seg.addr,
484 seg.addr + seg.size);
485 addr %= seg.size;
486 }
487
488 return addr;
489 }
490
491 static int aspeed_smc_flash_dummies(const AspeedSMCFlash *fl)
492 {
493 const AspeedSMCState *s = fl->controller;
494 uint32_t r_ctrl0 = s->regs[s->r_ctrl0 + fl->id];
495 uint32_t dummy_high = (r_ctrl0 >> CTRL_DUMMY_HIGH_SHIFT) & 0x1;
496 uint32_t dummy_low = (r_ctrl0 >> CTRL_DUMMY_LOW_SHIFT) & 0x3;
497 uint32_t dummies = ((dummy_high << 2) | dummy_low) * 8;
498
499 if (r_ctrl0 & CTRL_IO_DUAL_ADDR_DATA) {
500 dummies /= 2;
501 }
502
503 return dummies;
504 }
505
506 static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr)
507 {
508 const AspeedSMCState *s = fl->controller;
509 uint8_t cmd = aspeed_smc_flash_cmd(fl);
510 int i;
511
512 /* Flash access can not exceed CS segment */
513 addr = aspeed_smc_check_segment_addr(fl, addr);
514
515 ssi_transfer(s->spi, cmd);
516
517 if (aspeed_smc_flash_is_4byte(fl)) {
518 ssi_transfer(s->spi, (addr >> 24) & 0xff);
519 }
520 ssi_transfer(s->spi, (addr >> 16) & 0xff);
521 ssi_transfer(s->spi, (addr >> 8) & 0xff);
522 ssi_transfer(s->spi, (addr & 0xff));
523
524 /*
525 * Use fake transfers to model dummy bytes. The value should
526 * be configured to some non-zero value in fast read mode and
527 * zero in read mode. But, as the HW allows inconsistent
528 * settings, let's check for fast read mode.
529 */
530 if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) {
531 for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
532 ssi_transfer(fl->controller->spi, 0xFF);
533 }
534 }
535 }
536
537 static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
538 {
539 AspeedSMCFlash *fl = opaque;
540 AspeedSMCState *s = fl->controller;
541 uint64_t ret = 0;
542 int i;
543
544 switch (aspeed_smc_flash_mode(fl)) {
545 case CTRL_USERMODE:
546 for (i = 0; i < size; i++) {
547 ret |= ssi_transfer(s->spi, 0x0) << (8 * i);
548 }
549 break;
550 case CTRL_READMODE:
551 case CTRL_FREADMODE:
552 aspeed_smc_flash_select(fl);
553 aspeed_smc_flash_setup(fl, addr);
554
555 for (i = 0; i < size; i++) {
556 ret |= ssi_transfer(s->spi, 0x0) << (8 * i);
557 }
558
559 aspeed_smc_flash_unselect(fl);
560 break;
561 default:
562 qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid flash mode %d\n",
563 __func__, aspeed_smc_flash_mode(fl));
564 }
565
566 return ret;
567 }
568
569 static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data,
570 unsigned size)
571 {
572 AspeedSMCFlash *fl = opaque;
573 AspeedSMCState *s = fl->controller;
574 int i;
575
576 if (!aspeed_smc_is_writable(fl)) {
577 qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%"
578 HWADDR_PRIx "\n", __func__, addr);
579 return;
580 }
581
582 switch (aspeed_smc_flash_mode(fl)) {
583 case CTRL_USERMODE:
584 for (i = 0; i < size; i++) {
585 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff);
586 }
587 break;
588 case CTRL_WRITEMODE:
589 aspeed_smc_flash_select(fl);
590 aspeed_smc_flash_setup(fl, addr);
591
592 for (i = 0; i < size; i++) {
593 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff);
594 }
595
596 aspeed_smc_flash_unselect(fl);
597 break;
598 default:
599 qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid flash mode %d\n",
600 __func__, aspeed_smc_flash_mode(fl));
601 }
602 }
603
604 static const MemoryRegionOps aspeed_smc_flash_ops = {
605 .read = aspeed_smc_flash_read,
606 .write = aspeed_smc_flash_write,
607 .endianness = DEVICE_LITTLE_ENDIAN,
608 .valid = {
609 .min_access_size = 1,
610 .max_access_size = 4,
611 },
612 };
613
614 static void aspeed_smc_flash_update_cs(AspeedSMCFlash *fl)
615 {
616 const AspeedSMCState *s = fl->controller;
617
618 qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl));
619 }
620
621 static void aspeed_smc_reset(DeviceState *d)
622 {
623 AspeedSMCState *s = ASPEED_SMC(d);
624 int i;
625
626 memset(s->regs, 0, sizeof s->regs);
627
628 /* Pretend DMA is done (u-boot initialization) */
629 s->regs[R_INTR_CTRL] = INTR_CTRL_DMA_STATUS;
630
631 /* Unselect all slaves */
632 for (i = 0; i < s->num_cs; ++i) {
633 s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE;
634 qemu_set_irq(s->cs_lines[i], true);
635 }
636
637 /* setup default segment register values for all */
638 for (i = 0; i < s->ctrl->max_slaves; ++i) {
639 s->regs[R_SEG_ADDR0 + i] =
640 aspeed_smc_segment_to_reg(&s->ctrl->segments[i]);
641 }
642
643 /* HW strapping flash type for FMC controllers */
644 if (s->ctrl->segments == aspeed_segments_ast2500_fmc) {
645 /* flash type is fixed to SPI for CE0 and CE1 */
646 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0);
647 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1);
648 }
649
650 /* HW strapping for AST2400 FMC controllers (SCU70). Let's use the
651 * configuration of the palmetto-bmc machine */
652 if (s->ctrl->segments == aspeed_segments_fmc) {
653 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0);
654 }
655 }
656
657 static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size)
658 {
659 AspeedSMCState *s = ASPEED_SMC(opaque);
660
661 addr >>= 2;
662
663 if (addr == s->r_conf ||
664 addr == s->r_timings ||
665 addr == s->r_ce_ctrl ||
666 addr == R_INTR_CTRL ||
667 (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) ||
668 (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs)) {
669 return s->regs[addr];
670 } else {
671 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
672 __func__, addr);
673 return 0;
674 }
675 }
676
677 static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data,
678 unsigned int size)
679 {
680 AspeedSMCState *s = ASPEED_SMC(opaque);
681 uint32_t value = data;
682
683 addr >>= 2;
684
685 if (addr == s->r_conf ||
686 addr == s->r_timings ||
687 addr == s->r_ce_ctrl) {
688 s->regs[addr] = value;
689 } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) {
690 int cs = addr - s->r_ctrl0;
691 s->regs[addr] = value;
692 aspeed_smc_flash_update_cs(&s->flashes[cs]);
693 } else if (addr >= R_SEG_ADDR0 &&
694 addr < R_SEG_ADDR0 + s->ctrl->max_slaves) {
695 int cs = addr - R_SEG_ADDR0;
696
697 if (value != s->regs[R_SEG_ADDR0 + cs]) {
698 aspeed_smc_flash_set_segment(s, cs, value);
699 }
700 } else {
701 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
702 __func__, addr);
703 return;
704 }
705 }
706
707 static const MemoryRegionOps aspeed_smc_ops = {
708 .read = aspeed_smc_read,
709 .write = aspeed_smc_write,
710 .endianness = DEVICE_LITTLE_ENDIAN,
711 .valid.unaligned = true,
712 };
713
714 static void aspeed_smc_realize(DeviceState *dev, Error **errp)
715 {
716 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
717 AspeedSMCState *s = ASPEED_SMC(dev);
718 AspeedSMCClass *mc = ASPEED_SMC_GET_CLASS(s);
719 int i;
720 char name[32];
721 hwaddr offset = 0;
722
723 s->ctrl = mc->ctrl;
724
725 /* keep a copy under AspeedSMCState to speed up accesses */
726 s->r_conf = s->ctrl->r_conf;
727 s->r_ce_ctrl = s->ctrl->r_ce_ctrl;
728 s->r_ctrl0 = s->ctrl->r_ctrl0;
729 s->r_timings = s->ctrl->r_timings;
730 s->conf_enable_w0 = s->ctrl->conf_enable_w0;
731
732 /* Enforce some real HW limits */
733 if (s->num_cs > s->ctrl->max_slaves) {
734 qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n",
735 __func__, s->ctrl->max_slaves);
736 s->num_cs = s->ctrl->max_slaves;
737 }
738
739 s->spi = ssi_create_bus(dev, "spi");
740
741 /* Setup cs_lines for slaves */
742 sysbus_init_irq(sbd, &s->irq);
743 s->cs_lines = g_new0(qemu_irq, s->num_cs);
744 ssi_auto_connect_slaves(dev, s->cs_lines, s->spi);
745
746 for (i = 0; i < s->num_cs; ++i) {
747 sysbus_init_irq(sbd, &s->cs_lines[i]);
748 }
749
750 /* The memory region for the controller registers */
751 memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s,
752 s->ctrl->name, s->ctrl->nregs * 4);
753 sysbus_init_mmio(sbd, &s->mmio);
754
755 /*
756 * The container memory region representing the address space
757 * window in which the flash modules are mapped. The size and
758 * address depends on the SoC model and controller type.
759 */
760 snprintf(name, sizeof(name), "%s.flash", s->ctrl->name);
761
762 memory_region_init_io(&s->mmio_flash, OBJECT(s),
763 &aspeed_smc_flash_default_ops, s, name,
764 s->ctrl->flash_window_size);
765 sysbus_init_mmio(sbd, &s->mmio_flash);
766
767 s->flashes = g_new0(AspeedSMCFlash, s->ctrl->max_slaves);
768
769 /*
770 * Let's create a sub memory region for each possible slave. All
771 * have a configurable memory segment in the overall flash mapping
772 * window of the controller but, there is not necessarily a flash
773 * module behind to handle the memory accesses. This depends on
774 * the board configuration.
775 */
776 for (i = 0; i < s->ctrl->max_slaves; ++i) {
777 AspeedSMCFlash *fl = &s->flashes[i];
778
779 snprintf(name, sizeof(name), "%s.%d", s->ctrl->name, i);
780
781 fl->id = i;
782 fl->controller = s;
783 fl->size = s->ctrl->segments[i].size;
784 memory_region_init_io(&fl->mmio, OBJECT(s), &aspeed_smc_flash_ops,
785 fl, name, fl->size);
786 memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio);
787 offset += fl->size;
788 }
789 }
790
791 static const VMStateDescription vmstate_aspeed_smc = {
792 .name = "aspeed.smc",
793 .version_id = 1,
794 .minimum_version_id = 1,
795 .fields = (VMStateField[]) {
796 VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX),
797 VMSTATE_END_OF_LIST()
798 }
799 };
800
801 static Property aspeed_smc_properties[] = {
802 DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1),
803 DEFINE_PROP_END_OF_LIST(),
804 };
805
806 static void aspeed_smc_class_init(ObjectClass *klass, void *data)
807 {
808 DeviceClass *dc = DEVICE_CLASS(klass);
809 AspeedSMCClass *mc = ASPEED_SMC_CLASS(klass);
810
811 dc->realize = aspeed_smc_realize;
812 dc->reset = aspeed_smc_reset;
813 dc->props = aspeed_smc_properties;
814 dc->vmsd = &vmstate_aspeed_smc;
815 mc->ctrl = data;
816 }
817
818 static const TypeInfo aspeed_smc_info = {
819 .name = TYPE_ASPEED_SMC,
820 .parent = TYPE_SYS_BUS_DEVICE,
821 .instance_size = sizeof(AspeedSMCState),
822 .class_size = sizeof(AspeedSMCClass),
823 .abstract = true,
824 };
825
826 static void aspeed_smc_register_types(void)
827 {
828 int i;
829
830 type_register_static(&aspeed_smc_info);
831 for (i = 0; i < ARRAY_SIZE(controllers); ++i) {
832 TypeInfo ti = {
833 .name = controllers[i].name,
834 .parent = TYPE_ASPEED_SMC,
835 .class_init = aspeed_smc_class_init,
836 .class_data = (void *)&controllers[i],
837 };
838 type_register(&ti);
839 }
840 }
841
842 type_init(aspeed_smc_register_types)
armbru's QEMU hackery