4 #include "qemu/units.h"
5 #include "sysemu/dma.h"
7 #include "hw/ppc/spapr_drc.h"
8 #include "hw/mem/pc-dimm.h"
9 #include "hw/ppc/spapr_ovec.h"
10 #include "hw/ppc/spapr_irq.h"
15 typedef struct sPAPREventLogEntry sPAPREventLogEntry
;
16 typedef struct sPAPREventSource sPAPREventSource
;
17 typedef struct sPAPRPendingHPT sPAPRPendingHPT
;
18 typedef struct ICSState ICSState
;
20 #define HPTE64_V_HPTE_DIRTY 0x0000000000000040ULL
21 #define SPAPR_ENTRY_POINT 0x100
23 #define SPAPR_TIMEBASE_FREQ 512000000ULL
25 #define TYPE_SPAPR_RTC "spapr-rtc"
27 #define SPAPR_RTC(obj) \
28 OBJECT_CHECK(sPAPRRTCState, (obj), TYPE_SPAPR_RTC)
30 typedef struct sPAPRRTCState sPAPRRTCState
;
31 struct sPAPRRTCState
{
33 DeviceState parent_obj
;
37 typedef struct sPAPRDIMMState sPAPRDIMMState
;
38 typedef struct sPAPRMachineClass sPAPRMachineClass
;
40 #define TYPE_SPAPR_MACHINE "spapr-machine"
41 #define SPAPR_MACHINE(obj) \
42 OBJECT_CHECK(sPAPRMachineState, (obj), TYPE_SPAPR_MACHINE)
43 #define SPAPR_MACHINE_GET_CLASS(obj) \
44 OBJECT_GET_CLASS(sPAPRMachineClass, obj, TYPE_SPAPR_MACHINE)
45 #define SPAPR_MACHINE_CLASS(klass) \
46 OBJECT_CLASS_CHECK(sPAPRMachineClass, klass, TYPE_SPAPR_MACHINE)
49 SPAPR_RESIZE_HPT_DEFAULT
= 0,
50 SPAPR_RESIZE_HPT_DISABLED
,
51 SPAPR_RESIZE_HPT_ENABLED
,
52 SPAPR_RESIZE_HPT_REQUIRED
,
59 /* Hardware Transactional Memory */
60 #define SPAPR_CAP_HTM 0x00
61 /* Vector Scalar Extensions */
62 #define SPAPR_CAP_VSX 0x01
63 /* Decimal Floating Point */
64 #define SPAPR_CAP_DFP 0x02
65 /* Cache Flush on Privilege Change */
66 #define SPAPR_CAP_CFPC 0x03
67 /* Speculation Barrier Bounds Checking */
68 #define SPAPR_CAP_SBBC 0x04
69 /* Indirect Branch Serialisation */
70 #define SPAPR_CAP_IBS 0x05
71 /* HPT Maximum Page Size (encoded as a shift) */
72 #define SPAPR_CAP_HPT_MAXPAGESIZE 0x06
74 #define SPAPR_CAP_NUM (SPAPR_CAP_HPT_MAXPAGESIZE + 1)
80 #define SPAPR_CAP_OFF 0x00
81 #define SPAPR_CAP_ON 0x01
83 #define SPAPR_CAP_BROKEN 0x00
84 #define SPAPR_CAP_WORKAROUND 0x01
85 #define SPAPR_CAP_FIXED 0x02
86 #define SPAPR_CAP_FIXED_IBS 0x02
87 #define SPAPR_CAP_FIXED_CCD 0x03
89 typedef struct sPAPRCapabilities sPAPRCapabilities
;
90 struct sPAPRCapabilities
{
91 uint8_t caps
[SPAPR_CAP_NUM
];
97 struct sPAPRMachineClass
{
99 MachineClass parent_class
;
102 bool dr_lmb_enabled
; /* enable dynamic-reconfig/hotplug of LMBs */
103 bool use_ohci_by_default
; /* use USB-OHCI instead of XHCI */
104 bool pre_2_10_has_unused_icps
;
105 bool legacy_irq_allocation
;
107 void (*phb_placement
)(sPAPRMachineState
*spapr
, uint32_t index
,
108 uint64_t *buid
, hwaddr
*pio
,
109 hwaddr
*mmio32
, hwaddr
*mmio64
,
110 unsigned n_dma
, uint32_t *liobns
, Error
**errp
);
111 sPAPRResizeHPT resize_hpt_default
;
112 sPAPRCapabilities default_caps
;
119 struct sPAPRMachineState
{
121 MachineState parent_obj
;
123 struct VIOsPAPRBus
*vio_bus
;
124 QLIST_HEAD(, sPAPRPHBState
) phbs
;
125 struct sPAPRNVRAM
*nvram
;
129 sPAPRResizeHPT resize_hpt
;
132 uint64_t patb_entry
; /* Process tbl registed in H_REGISTER_PROCESS_TABLE */
133 sPAPRPendingHPT
*pending_hpt
; /* in-progress resize */
141 uint32_t initrd_base
;
143 uint64_t rtc_offset
; /* Now used only during incoming migration */
144 struct PPCTimebase tb
;
146 uint32_t vsmt
; /* Virtual SMT mode (KVM's "core stride") */
148 Notifier epow_notifier
;
149 QTAILQ_HEAD(, sPAPREventLogEntry
) pending_events
;
150 bool use_hotplug_event_source
;
151 sPAPREventSource
*event_sources
;
153 /* ibm,client-architecture-support option negotiation */
155 bool cas_legacy_guest_workaround
;
156 sPAPROptionVector
*ov5
; /* QEMU-supported option vectors */
157 sPAPROptionVector
*ov5_cas
; /* negotiated (via CAS) option vectors */
158 uint32_t max_compat_pvr
;
160 /* Migration state */
162 bool htab_first_pass
;
165 /* Pending DIMM unplug cache. It is populated when a LMB
166 * unplug starts. It can be regenerated if a migration
167 * occurs during the unplug process. */
168 QTAILQ_HEAD(, sPAPRDIMMState
) pending_dimm_unplugs
;
173 const char *icp_type
;
175 unsigned long *irq_map
;
177 bool cmd_line_caps
[SPAPR_CAP_NUM
];
178 sPAPRCapabilities def
, eff
, mig
;
182 #define H_BUSY 1 /* Hardware busy -- retry later */
183 #define H_CLOSED 2 /* Resource closed */
184 #define H_NOT_AVAILABLE 3
185 #define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
187 #define H_IN_PROGRESS 14 /* Kind of like busy */
188 #define H_PAGE_REGISTERED 15
189 #define H_PARTIAL_STORE 16
190 #define H_PENDING 17 /* returned from H_POLL_PENDING */
191 #define H_CONTINUE 18 /* Returned from H_Join on success */
192 #define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
193 #define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
194 is a good time to retry */
195 #define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
196 is a good time to retry */
197 #define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
198 is a good time to retry */
199 #define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
200 is a good time to retry */
201 #define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
202 is a good time to retry */
203 #define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
204 is a good time to retry */
205 #define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
206 #define H_HARDWARE -1 /* Hardware error */
207 #define H_FUNCTION -2 /* Function not supported */
208 #define H_PRIVILEGE -3 /* Caller not privileged */
209 #define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
210 #define H_BAD_MODE -5 /* Illegal msr value */
211 #define H_PTEG_FULL -6 /* PTEG is full */
212 #define H_NOT_FOUND -7 /* PTE was not found" */
213 #define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
215 #define H_AUTHORITY -10
216 #define H_PERMISSION -11
217 #define H_DROPPED -12
218 #define H_SOURCE_PARM -13
219 #define H_DEST_PARM -14
220 #define H_REMOTE_PARM -15
221 #define H_RESOURCE -16
222 #define H_ADAPTER_PARM -17
223 #define H_RH_PARM -18
224 #define H_RCQ_PARM -19
225 #define H_SCQ_PARM -20
226 #define H_EQ_PARM -21
227 #define H_RT_PARM -22
228 #define H_ST_PARM -23
229 #define H_SIGT_PARM -24
230 #define H_TOKEN_PARM -25
231 #define H_MLENGTH_PARM -27
232 #define H_MEM_PARM -28
233 #define H_MEM_ACCESS_PARM -29
234 #define H_ATTR_PARM -30
235 #define H_PORT_PARM -31
236 #define H_MCG_PARM -32
237 #define H_VL_PARM -33
238 #define H_TSIZE_PARM -34
239 #define H_TRACE_PARM -35
241 #define H_MASK_PARM -37
242 #define H_MCG_FULL -38
243 #define H_ALIAS_EXIST -39
244 #define H_P_COUNTER -40
245 #define H_TABLE_FULL -41
246 #define H_ALT_TABLE -42
247 #define H_MR_CONDITION -43
248 #define H_NOT_ENOUGH_RESOURCES -44
249 #define H_R_STATE -45
250 #define H_RESCINDEND -46
259 #define H_UNSUPPORTED_FLAG -256
260 #define H_MULTI_THREADS_ACTIVE -9005
263 /* Long Busy is a condition that can be returned by the firmware
264 * when a call cannot be completed now, but the identical call
265 * should be retried later. This prevents calls blocking in the
266 * firmware for long periods of time. Annoyingly the firmware can return
267 * a range of return codes, hinting at how long we should wait before
268 * retrying. If you don't care for the hint, the macro below is a good
269 * way to check for the long_busy return codes
271 #define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
272 && (x <= H_LONG_BUSY_END_RANGE))
275 #define H_LARGE_PAGE (1ULL<<(63-16))
276 #define H_EXACT (1ULL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
277 #define H_R_XLATE (1ULL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
278 #define H_READ_4 (1ULL<<(63-26)) /* Return 4 PTEs */
279 #define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
280 #define H_PAGE_UNUSED ((1ULL<<(63-29)) | (1ULL<<(63-30)))
281 #define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
282 #define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
283 #define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
284 #define H_AVPN (1ULL<<(63-32)) /* An avpn is provided as a sanity test */
285 #define H_ANDCOND (1ULL<<(63-33))
286 #define H_ICACHE_INVALIDATE (1ULL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
287 #define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
288 #define H_ZERO_PAGE (1ULL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
289 #define H_COPY_PAGE (1ULL<<(63-49))
290 #define H_N (1ULL<<(63-61))
291 #define H_PP1 (1ULL<<(63-62))
292 #define H_PP2 (1ULL<<(63-63))
294 /* Values for 2nd argument to H_SET_MODE */
295 #define H_SET_MODE_RESOURCE_SET_CIABR 1
296 #define H_SET_MODE_RESOURCE_SET_DAWR 2
297 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
298 #define H_SET_MODE_RESOURCE_LE 4
300 /* Flags for H_SET_MODE_RESOURCE_LE */
301 #define H_SET_MODE_ENDIAN_BIG 0
302 #define H_SET_MODE_ENDIAN_LITTLE 1
305 #define H_VASI_INVALID 0
306 #define H_VASI_ENABLED 1
307 #define H_VASI_ABORTED 2
308 #define H_VASI_SUSPENDING 3
309 #define H_VASI_SUSPENDED 4
310 #define H_VASI_RESUMED 5
311 #define H_VASI_COMPLETED 6
314 #define H_DABRX_HYPERVISOR (1ULL<<(63-61))
315 #define H_DABRX_KERNEL (1ULL<<(63-62))
316 #define H_DABRX_USER (1ULL<<(63-63))
318 /* Values for KVM_PPC_GET_CPU_CHAR & H_GET_CPU_CHARACTERISTICS */
319 #define H_CPU_CHAR_SPEC_BAR_ORI31 PPC_BIT(0)
320 #define H_CPU_CHAR_BCCTRL_SERIALISED PPC_BIT(1)
321 #define H_CPU_CHAR_L1D_FLUSH_ORI30 PPC_BIT(2)
322 #define H_CPU_CHAR_L1D_FLUSH_TRIG2 PPC_BIT(3)
323 #define H_CPU_CHAR_L1D_THREAD_PRIV PPC_BIT(4)
324 #define H_CPU_CHAR_HON_BRANCH_HINTS PPC_BIT(5)
325 #define H_CPU_CHAR_THR_RECONF_TRIG PPC_BIT(6)
326 #define H_CPU_CHAR_CACHE_COUNT_DIS PPC_BIT(7)
327 #define H_CPU_BEHAV_FAVOUR_SECURITY PPC_BIT(0)
328 #define H_CPU_BEHAV_L1D_FLUSH_PR PPC_BIT(1)
329 #define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR PPC_BIT(2)
331 /* Each control block has to be on a 4K boundary */
332 #define H_CB_ALIGNMENT 4096
334 /* pSeries hypervisor opcodes */
335 #define H_REMOVE 0x04
338 #define H_CLEAR_MOD 0x10
339 #define H_CLEAR_REF 0x14
340 #define H_PROTECT 0x18
341 #define H_GET_TCE 0x1c
342 #define H_PUT_TCE 0x20
343 #define H_SET_SPRG0 0x24
344 #define H_SET_DABR 0x28
345 #define H_PAGE_INIT 0x2c
346 #define H_SET_ASR 0x30
347 #define H_ASR_ON 0x34
348 #define H_ASR_OFF 0x38
349 #define H_LOGICAL_CI_LOAD 0x3c
350 #define H_LOGICAL_CI_STORE 0x40
351 #define H_LOGICAL_CACHE_LOAD 0x44
352 #define H_LOGICAL_CACHE_STORE 0x48
353 #define H_LOGICAL_ICBI 0x4c
354 #define H_LOGICAL_DCBF 0x50
355 #define H_GET_TERM_CHAR 0x54
356 #define H_PUT_TERM_CHAR 0x58
357 #define H_REAL_TO_LOGICAL 0x5c
358 #define H_HYPERVISOR_DATA 0x60
364 #define H_PERFMON 0x7c
365 #define H_MIGRATE_DMA 0x78
366 #define H_REGISTER_VPA 0xDC
368 #define H_CONFER 0xE4
370 #define H_GET_PPP 0xEC
371 #define H_SET_PPP 0xF0
374 #define H_REG_CRQ 0xFC
375 #define H_FREE_CRQ 0x100
376 #define H_VIO_SIGNAL 0x104
377 #define H_SEND_CRQ 0x108
378 #define H_COPY_RDMA 0x110
379 #define H_REGISTER_LOGICAL_LAN 0x114
380 #define H_FREE_LOGICAL_LAN 0x118
381 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C
382 #define H_SEND_LOGICAL_LAN 0x120
383 #define H_BULK_REMOVE 0x124
384 #define H_MULTICAST_CTRL 0x130
385 #define H_SET_XDABR 0x134
386 #define H_STUFF_TCE 0x138
387 #define H_PUT_TCE_INDIRECT 0x13C
388 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C
389 #define H_VTERM_PARTNER_INFO 0x150
390 #define H_REGISTER_VTERM 0x154
391 #define H_FREE_VTERM 0x158
392 #define H_RESET_EVENTS 0x15C
393 #define H_ALLOC_RESOURCE 0x160
394 #define H_FREE_RESOURCE 0x164
395 #define H_MODIFY_QP 0x168
396 #define H_QUERY_QP 0x16C
397 #define H_REREGISTER_PMR 0x170
398 #define H_REGISTER_SMR 0x174
399 #define H_QUERY_MR 0x178
400 #define H_QUERY_MW 0x17C
401 #define H_QUERY_HCA 0x180
402 #define H_QUERY_PORT 0x184
403 #define H_MODIFY_PORT 0x188
404 #define H_DEFINE_AQP1 0x18C
405 #define H_GET_TRACE_BUFFER 0x190
406 #define H_DEFINE_AQP0 0x194
407 #define H_RESIZE_MR 0x198
408 #define H_ATTACH_MCQP 0x19C
409 #define H_DETACH_MCQP 0x1A0
410 #define H_CREATE_RPT 0x1A4
411 #define H_REMOVE_RPT 0x1A8
412 #define H_REGISTER_RPAGES 0x1AC
413 #define H_DISABLE_AND_GETC 0x1B0
414 #define H_ERROR_DATA 0x1B4
415 #define H_GET_HCA_INFO 0x1B8
416 #define H_GET_PERF_COUNT 0x1BC
417 #define H_MANAGE_TRACE 0x1C0
418 #define H_GET_CPU_CHARACTERISTICS 0x1C8
419 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
420 #define H_QUERY_INT_STATE 0x1E4
421 #define H_POLL_PENDING 0x1D8
422 #define H_ILLAN_ATTRIBUTES 0x244
423 #define H_MODIFY_HEA_QP 0x250
424 #define H_QUERY_HEA_QP 0x254
425 #define H_QUERY_HEA 0x258
426 #define H_QUERY_HEA_PORT 0x25C
427 #define H_MODIFY_HEA_PORT 0x260
428 #define H_REG_BCMC 0x264
429 #define H_DEREG_BCMC 0x268
430 #define H_REGISTER_HEA_RPAGES 0x26C
431 #define H_DISABLE_AND_GET_HEA 0x270
432 #define H_GET_HEA_INFO 0x274
433 #define H_ALLOC_HEA_RESOURCE 0x278
434 #define H_ADD_CONN 0x284
435 #define H_DEL_CONN 0x288
437 #define H_VASI_STATE 0x2A4
438 #define H_ENABLE_CRQ 0x2B0
439 #define H_GET_EM_PARMS 0x2B8
440 #define H_SET_MPP 0x2D0
441 #define H_GET_MPP 0x2D4
442 #define H_XIRR_X 0x2FC
443 #define H_RANDOM 0x300
444 #define H_SET_MODE 0x31C
445 #define H_RESIZE_HPT_PREPARE 0x36C
446 #define H_RESIZE_HPT_COMMIT 0x370
447 #define H_CLEAN_SLB 0x374
448 #define H_INVALIDATE_PID 0x378
449 #define H_REGISTER_PROC_TBL 0x37C
450 #define H_SIGNAL_SYS_RESET 0x380
451 #define MAX_HCALL_OPCODE H_SIGNAL_SYS_RESET
453 /* The hcalls above are standardized in PAPR and implemented by pHyp
456 * We also need some hcalls which are specific to qemu / KVM-on-POWER.
457 * We put those into the 0xf000-0xfffc range which is reserved by PAPR
458 * for "platform-specific" hcalls.
460 #define KVMPPC_HCALL_BASE 0xf000
461 #define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
462 #define KVMPPC_H_LOGICAL_MEMOP (KVMPPC_HCALL_BASE + 0x1)
463 /* Client Architecture support */
464 #define KVMPPC_H_CAS (KVMPPC_HCALL_BASE + 0x2)
465 #define KVMPPC_HCALL_MAX KVMPPC_H_CAS
467 typedef struct sPAPRDeviceTreeUpdateHeader
{
469 } sPAPRDeviceTreeUpdateHeader
;
471 #define hcall_dprintf(fmt, ...) \
473 qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt, __func__, ## __VA_ARGS__); \
476 typedef target_ulong (*spapr_hcall_fn
)(PowerPCCPU
*cpu
, sPAPRMachineState
*sm
,
480 void spapr_register_hypercall(target_ulong opcode
, spapr_hcall_fn fn
);
481 target_ulong
spapr_hypercall(PowerPCCPU
*cpu
, target_ulong opcode
,
484 /* ibm,set-eeh-option */
485 #define RTAS_EEH_DISABLE 0
486 #define RTAS_EEH_ENABLE 1
487 #define RTAS_EEH_THAW_IO 2
488 #define RTAS_EEH_THAW_DMA 3
490 /* ibm,get-config-addr-info2 */
491 #define RTAS_GET_PE_ADDR 0
492 #define RTAS_GET_PE_MODE 1
493 #define RTAS_PE_MODE_NONE 0
494 #define RTAS_PE_MODE_NOT_SHARED 1
495 #define RTAS_PE_MODE_SHARED 2
497 /* ibm,read-slot-reset-state2 */
498 #define RTAS_EEH_PE_STATE_NORMAL 0
499 #define RTAS_EEH_PE_STATE_RESET 1
500 #define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
501 #define RTAS_EEH_PE_STATE_STOPPED_DMA 4
502 #define RTAS_EEH_PE_STATE_UNAVAIL 5
503 #define RTAS_EEH_NOT_SUPPORT 0
504 #define RTAS_EEH_SUPPORT 1
505 #define RTAS_EEH_PE_UNAVAIL_INFO 1000
506 #define RTAS_EEH_PE_RECOVER_INFO 0
508 /* ibm,set-slot-reset */
509 #define RTAS_SLOT_RESET_DEACTIVATE 0
510 #define RTAS_SLOT_RESET_HOT 1
511 #define RTAS_SLOT_RESET_FUNDAMENTAL 3
513 /* ibm,slot-error-detail */
514 #define RTAS_SLOT_TEMP_ERR_LOG 1
515 #define RTAS_SLOT_PERM_ERR_LOG 2
517 /* RTAS return codes */
518 #define RTAS_OUT_SUCCESS 0
519 #define RTAS_OUT_NO_ERRORS_FOUND 1
520 #define RTAS_OUT_HW_ERROR -1
521 #define RTAS_OUT_BUSY -2
522 #define RTAS_OUT_PARAM_ERROR -3
523 #define RTAS_OUT_NOT_SUPPORTED -3
524 #define RTAS_OUT_NO_SUCH_INDICATOR -3
525 #define RTAS_OUT_NOT_AUTHORIZED -9002
526 #define RTAS_OUT_SYSPARM_PARAM_ERROR -9999
528 /* DDW pagesize mask values from ibm,query-pe-dma-window */
529 #define RTAS_DDW_PGSIZE_4K 0x01
530 #define RTAS_DDW_PGSIZE_64K 0x02
531 #define RTAS_DDW_PGSIZE_16M 0x04
532 #define RTAS_DDW_PGSIZE_32M 0x08
533 #define RTAS_DDW_PGSIZE_64M 0x10
534 #define RTAS_DDW_PGSIZE_128M 0x20
535 #define RTAS_DDW_PGSIZE_256M 0x40
536 #define RTAS_DDW_PGSIZE_16G 0x80
539 #define RTAS_TOKEN_BASE 0x2000
541 #define RTAS_DISPLAY_CHARACTER (RTAS_TOKEN_BASE + 0x00)
542 #define RTAS_GET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x01)
543 #define RTAS_SET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x02)
544 #define RTAS_POWER_OFF (RTAS_TOKEN_BASE + 0x03)
545 #define RTAS_SYSTEM_REBOOT (RTAS_TOKEN_BASE + 0x04)
546 #define RTAS_QUERY_CPU_STOPPED_STATE (RTAS_TOKEN_BASE + 0x05)
547 #define RTAS_START_CPU (RTAS_TOKEN_BASE + 0x06)
548 #define RTAS_STOP_SELF (RTAS_TOKEN_BASE + 0x07)
549 #define RTAS_IBM_GET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x08)
550 #define RTAS_IBM_SET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x09)
551 #define RTAS_IBM_SET_XIVE (RTAS_TOKEN_BASE + 0x0A)
552 #define RTAS_IBM_GET_XIVE (RTAS_TOKEN_BASE + 0x0B)
553 #define RTAS_IBM_INT_OFF (RTAS_TOKEN_BASE + 0x0C)
554 #define RTAS_IBM_INT_ON (RTAS_TOKEN_BASE + 0x0D)
555 #define RTAS_CHECK_EXCEPTION (RTAS_TOKEN_BASE + 0x0E)
556 #define RTAS_EVENT_SCAN (RTAS_TOKEN_BASE + 0x0F)
557 #define RTAS_IBM_SET_TCE_BYPASS (RTAS_TOKEN_BASE + 0x10)
558 #define RTAS_QUIESCE (RTAS_TOKEN_BASE + 0x11)
559 #define RTAS_NVRAM_FETCH (RTAS_TOKEN_BASE + 0x12)
560 #define RTAS_NVRAM_STORE (RTAS_TOKEN_BASE + 0x13)
561 #define RTAS_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x14)
562 #define RTAS_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x15)
563 #define RTAS_IBM_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x16)
564 #define RTAS_IBM_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x17)
565 #define RTAS_IBM_QUERY_INTERRUPT_SOURCE_NUMBER (RTAS_TOKEN_BASE + 0x18)
566 #define RTAS_IBM_CHANGE_MSI (RTAS_TOKEN_BASE + 0x19)
567 #define RTAS_SET_INDICATOR (RTAS_TOKEN_BASE + 0x1A)
568 #define RTAS_SET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1B)
569 #define RTAS_GET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1C)
570 #define RTAS_GET_SENSOR_STATE (RTAS_TOKEN_BASE + 0x1D)
571 #define RTAS_IBM_CONFIGURE_CONNECTOR (RTAS_TOKEN_BASE + 0x1E)
572 #define RTAS_IBM_OS_TERM (RTAS_TOKEN_BASE + 0x1F)
573 #define RTAS_IBM_SET_EEH_OPTION (RTAS_TOKEN_BASE + 0x20)
574 #define RTAS_IBM_GET_CONFIG_ADDR_INFO2 (RTAS_TOKEN_BASE + 0x21)
575 #define RTAS_IBM_READ_SLOT_RESET_STATE2 (RTAS_TOKEN_BASE + 0x22)
576 #define RTAS_IBM_SET_SLOT_RESET (RTAS_TOKEN_BASE + 0x23)
577 #define RTAS_IBM_CONFIGURE_PE (RTAS_TOKEN_BASE + 0x24)
578 #define RTAS_IBM_SLOT_ERROR_DETAIL (RTAS_TOKEN_BASE + 0x25)
579 #define RTAS_IBM_QUERY_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x26)
580 #define RTAS_IBM_CREATE_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x27)
581 #define RTAS_IBM_REMOVE_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x28)
582 #define RTAS_IBM_RESET_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x29)
584 #define RTAS_TOKEN_MAX (RTAS_TOKEN_BASE + 0x2A)
586 /* RTAS ibm,get-system-parameter token values */
587 #define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS 20
588 #define RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE 42
589 #define RTAS_SYSPARM_UUID 48
591 /* RTAS indicator/sensor types
593 * as defined by PAPR+ 2.7 7.3.5.4, Table 41
595 * NOTE: currently only DR-related sensors are implemented here
597 #define RTAS_SENSOR_TYPE_ISOLATION_STATE 9001
598 #define RTAS_SENSOR_TYPE_DR 9002
599 #define RTAS_SENSOR_TYPE_ALLOCATION_STATE 9003
600 #define RTAS_SENSOR_TYPE_ENTITY_SENSE RTAS_SENSOR_TYPE_ALLOCATION_STATE
602 /* Possible values for the platform-processor-diagnostics-run-mode parameter
603 * of the RTAS ibm,get-system-parameter call.
605 #define DIAGNOSTICS_RUN_MODE_DISABLED 0
606 #define DIAGNOSTICS_RUN_MODE_STAGGERED 1
607 #define DIAGNOSTICS_RUN_MODE_IMMEDIATE 2
608 #define DIAGNOSTICS_RUN_MODE_PERIODIC 3
610 static inline uint64_t ppc64_phys_to_real(uint64_t addr
)
612 return addr
& ~0xF000000000000000ULL
;
615 static inline uint32_t rtas_ld(target_ulong phys
, int n
)
617 return ldl_be_phys(&address_space_memory
, ppc64_phys_to_real(phys
+ 4*n
));
620 static inline uint64_t rtas_ldq(target_ulong phys
, int n
)
622 return (uint64_t)rtas_ld(phys
, n
) << 32 | rtas_ld(phys
, n
+ 1);
625 static inline void rtas_st(target_ulong phys
, int n
, uint32_t val
)
627 stl_be_phys(&address_space_memory
, ppc64_phys_to_real(phys
+ 4*n
), val
);
630 typedef void (*spapr_rtas_fn
)(PowerPCCPU
*cpu
, sPAPRMachineState
*sm
,
632 uint32_t nargs
, target_ulong args
,
633 uint32_t nret
, target_ulong rets
);
634 void spapr_rtas_register(int token
, const char *name
, spapr_rtas_fn fn
);
635 target_ulong
spapr_rtas_call(PowerPCCPU
*cpu
, sPAPRMachineState
*sm
,
636 uint32_t token
, uint32_t nargs
, target_ulong args
,
637 uint32_t nret
, target_ulong rets
);
638 void spapr_dt_rtas_tokens(void *fdt
, int rtas
);
639 void spapr_load_rtas(sPAPRMachineState
*spapr
, void *fdt
, hwaddr addr
);
641 #define SPAPR_TCE_PAGE_SHIFT 12
642 #define SPAPR_TCE_PAGE_SIZE (1ULL << SPAPR_TCE_PAGE_SHIFT)
643 #define SPAPR_TCE_PAGE_MASK (SPAPR_TCE_PAGE_SIZE - 1)
645 #define SPAPR_VIO_BASE_LIOBN 0x00000000
646 #define SPAPR_VIO_LIOBN(reg) (0x00000000 | (reg))
647 #define SPAPR_PCI_LIOBN(phb_index, window_num) \
648 (0x80000000 | ((phb_index) << 8) | (window_num))
649 #define SPAPR_IS_PCI_LIOBN(liobn) (!!((liobn) & 0x80000000))
650 #define SPAPR_PCI_DMA_WINDOW_NUM(liobn) ((liobn) & 0xff)
652 #define RTAS_ERROR_LOG_MAX 2048
654 #define RTAS_EVENT_SCAN_RATE 1
656 /* This helper should be used to encode interrupt specifiers when the related
657 * "interrupt-controller" node has its "#interrupt-cells" property set to 2 (ie,
658 * VIO devices, RTAS event sources and PHBs).
660 static inline void spapr_dt_xics_irq(uint32_t *intspec
, int irq
, bool is_lsi
)
662 intspec
[0] = cpu_to_be32(irq
);
663 intspec
[1] = is_lsi
? cpu_to_be32(1) : 0;
666 typedef struct sPAPRTCETable sPAPRTCETable
;
668 #define TYPE_SPAPR_TCE_TABLE "spapr-tce-table"
669 #define SPAPR_TCE_TABLE(obj) \
670 OBJECT_CHECK(sPAPRTCETable, (obj), TYPE_SPAPR_TCE_TABLE)
672 #define TYPE_SPAPR_IOMMU_MEMORY_REGION "spapr-iommu-memory-region"
673 #define SPAPR_IOMMU_MEMORY_REGION(obj) \
674 OBJECT_CHECK(IOMMUMemoryRegion, (obj), TYPE_SPAPR_IOMMU_MEMORY_REGION)
676 struct sPAPRTCETable
{
683 uint32_t mig_nb_table
;
689 IOMMUMemoryRegion iommu
;
690 struct VIOsPAPRDevice
*vdev
; /* for @bypass migration compatibility only */
691 QLIST_ENTRY(sPAPRTCETable
) list
;
694 sPAPRTCETable
*spapr_tce_find_by_liobn(target_ulong liobn
);
696 struct sPAPREventLogEntry
{
698 uint32_t extended_length
;
700 QTAILQ_ENTRY(sPAPREventLogEntry
) next
;
703 void spapr_events_init(sPAPRMachineState
*sm
);
704 void spapr_dt_events(sPAPRMachineState
*sm
, void *fdt
);
705 int spapr_h_cas_compose_response(sPAPRMachineState
*sm
,
706 target_ulong addr
, target_ulong size
,
707 sPAPROptionVector
*ov5_updates
);
708 void close_htab_fd(sPAPRMachineState
*spapr
);
709 void spapr_setup_hpt_and_vrma(sPAPRMachineState
*spapr
);
710 void spapr_free_hpt(sPAPRMachineState
*spapr
);
711 sPAPRTCETable
*spapr_tce_new_table(DeviceState
*owner
, uint32_t liobn
);
712 void spapr_tce_table_enable(sPAPRTCETable
*tcet
,
713 uint32_t page_shift
, uint64_t bus_offset
,
715 void spapr_tce_table_disable(sPAPRTCETable
*tcet
);
716 void spapr_tce_set_need_vfio(sPAPRTCETable
*tcet
, bool need_vfio
);
718 MemoryRegion
*spapr_tce_get_iommu(sPAPRTCETable
*tcet
);
719 int spapr_dma_dt(void *fdt
, int node_off
, const char *propname
,
720 uint32_t liobn
, uint64_t window
, uint32_t size
);
721 int spapr_tcet_dma_dt(void *fdt
, int node_off
, const char *propname
,
722 sPAPRTCETable
*tcet
);
723 void spapr_pci_switch_vga(bool big_endian
);
724 void spapr_hotplug_req_add_by_index(sPAPRDRConnector
*drc
);
725 void spapr_hotplug_req_remove_by_index(sPAPRDRConnector
*drc
);
726 void spapr_hotplug_req_add_by_count(sPAPRDRConnectorType drc_type
,
728 void spapr_hotplug_req_remove_by_count(sPAPRDRConnectorType drc_type
,
730 void spapr_hotplug_req_add_by_count_indexed(sPAPRDRConnectorType drc_type
,
731 uint32_t count
, uint32_t index
);
732 void spapr_hotplug_req_remove_by_count_indexed(sPAPRDRConnectorType drc_type
,
733 uint32_t count
, uint32_t index
);
734 int spapr_hpt_shift_for_ramsize(uint64_t ramsize
);
735 void spapr_reallocate_hpt(sPAPRMachineState
*spapr
, int shift
,
737 void spapr_clear_pending_events(sPAPRMachineState
*spapr
);
739 /* CPU and LMB DRC release callbacks. */
740 void spapr_core_release(DeviceState
*dev
);
741 void spapr_lmb_release(DeviceState
*dev
);
743 void spapr_rtc_read(sPAPRRTCState
*rtc
, struct tm
*tm
, uint32_t *ns
);
744 int spapr_rtc_import_offset(sPAPRRTCState
*rtc
, int64_t legacy_offset
);
746 #define TYPE_SPAPR_RNG "spapr-rng"
748 int spapr_rng_populate_dt(void *fdt
);
750 #define SPAPR_MEMORY_BLOCK_SIZE (1 << 28) /* 256MB */
753 * This defines the maximum number of DIMM slots we can have for sPAPR
754 * guest. This is not defined by sPAPR but we are defining it to 32 slots
755 * based on default number of slots provided by PowerPC kernel.
757 #define SPAPR_MAX_RAM_SLOTS 32
759 /* 1GB alignment for hotplug memory region */
760 #define SPAPR_DEVICE_MEM_ALIGN (1 * GiB)
763 * Number of 32 bit words in each LMB list entry in ibm,dynamic-memory
764 * property under ibm,dynamic-reconfiguration-memory node.
766 #define SPAPR_DR_LMB_LIST_ENTRY_SIZE 6
769 * Defines for flag value in ibm,dynamic-memory property under
770 * ibm,dynamic-reconfiguration-memory node.
772 #define SPAPR_LMB_FLAGS_ASSIGNED 0x00000008
773 #define SPAPR_LMB_FLAGS_DRC_INVALID 0x00000020
774 #define SPAPR_LMB_FLAGS_RESERVED 0x00000080
776 void spapr_do_system_reset_on_cpu(CPUState
*cs
, run_on_cpu_data arg
);
778 #define HTAB_SIZE(spapr) (1ULL << ((spapr)->htab_shift))
780 int spapr_get_vcpu_id(PowerPCCPU
*cpu
);
781 void spapr_set_vcpu_id(PowerPCCPU
*cpu
, int cpu_index
, Error
**errp
);
782 PowerPCCPU
*spapr_find_cpu(int vcpu_id
);
784 int spapr_caps_pre_load(void *opaque
);
785 int spapr_caps_pre_save(void *opaque
);
788 * Handling of optional capabilities
790 extern const VMStateDescription vmstate_spapr_cap_htm
;
791 extern const VMStateDescription vmstate_spapr_cap_vsx
;
792 extern const VMStateDescription vmstate_spapr_cap_dfp
;
793 extern const VMStateDescription vmstate_spapr_cap_cfpc
;
794 extern const VMStateDescription vmstate_spapr_cap_sbbc
;
795 extern const VMStateDescription vmstate_spapr_cap_ibs
;
797 static inline uint8_t spapr_get_cap(sPAPRMachineState
*spapr
, int cap
)
799 return spapr
->eff
.caps
[cap
];
802 void spapr_caps_init(sPAPRMachineState
*spapr
);
803 void spapr_caps_apply(sPAPRMachineState
*spapr
);
804 void spapr_caps_cpu_apply(sPAPRMachineState
*spapr
, PowerPCCPU
*cpu
);
805 void spapr_caps_add_properties(sPAPRMachineClass
*smc
, Error
**errp
);
806 int spapr_caps_post_migration(sPAPRMachineState
*spapr
);
808 void spapr_check_pagesize(sPAPRMachineState
*spapr
, hwaddr pagesize
,
811 #endif /* HW_SPAPR_H */