MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
[qemu/armbru.git] / include / hw / usb / ehci-regs.h
blob3e91b8e610298124cb905f2ed8075d7832e4c293
1 #ifndef HW_USB_EHCI_REGS_H
2 #define HW_USB_EHCI_REGS_H
4 /* Capability Registers Base Address - section 2.2 */
5 #define CAPLENGTH 0x0000 /* 1-byte, 0x0001 reserved */
6 #define HCIVERSION 0x0002 /* 2-bytes, i/f version # */
7 #define HCSPARAMS 0x0004 /* 4-bytes, structural params */
8 #define HCCPARAMS 0x0008 /* 4-bytes, capability params */
9 #define EECP HCCPARAMS + 1
10 #define HCSPPORTROUTE1 0x000c
11 #define HCSPPORTROUTE2 0x0010
13 #define USBCMD 0x0000
14 #define USBCMD_RUNSTOP (1 << 0) // run / Stop
15 #define USBCMD_HCRESET (1 << 1) // HC Reset
16 #define USBCMD_FLS (3 << 2) // Frame List Size
17 #define USBCMD_FLS_SH 2 // Frame List Size Shift
18 #define USBCMD_PSE (1 << 4) // Periodic Schedule Enable
19 #define USBCMD_ASE (1 << 5) // Asynch Schedule Enable
20 #define USBCMD_IAAD (1 << 6) // Int Asynch Advance Doorbell
21 #define USBCMD_LHCR (1 << 7) // Light Host Controller Reset
22 #define USBCMD_ASPMC (3 << 8) // Async Sched Park Mode Count
23 #define USBCMD_ASPME (1 << 11) // Async Sched Park Mode Enable
24 #define USBCMD_ITC (0x7f << 16) // Int Threshold Control
25 #define USBCMD_ITC_SH 16 // Int Threshold Control Shift
27 #define USBSTS 0x0004
28 #define USBSTS_RO_MASK 0x0000003f
29 #define USBSTS_INT (1 << 0) // USB Interrupt
30 #define USBSTS_ERRINT (1 << 1) // Error Interrupt
31 #define USBSTS_PCD (1 << 2) // Port Change Detect
32 #define USBSTS_FLR (1 << 3) // Frame List Rollover
33 #define USBSTS_HSE (1 << 4) // Host System Error
34 #define USBSTS_IAA (1 << 5) // Interrupt on Async Advance
35 #define USBSTS_HALT (1 << 12) // HC Halted
36 #define USBSTS_REC (1 << 13) // Reclamation
37 #define USBSTS_PSS (1 << 14) // Periodic Schedule Status
38 #define USBSTS_ASS (1 << 15) // Asynchronous Schedule Status
41 * Interrupt enable bits correspond to the interrupt active bits in USBSTS
42 * so no need to redefine here.
44 #define USBINTR 0x0008
45 #define USBINTR_MASK 0x0000003f
47 #define FRINDEX 0x000c
48 #define CTRLDSSEGMENT 0x0010
49 #define PERIODICLISTBASE 0x0014
50 #define ASYNCLISTADDR 0x0018
51 #define ASYNCLISTADDR_MASK 0xffffffe0
53 #define CONFIGFLAG 0x0040
56 * Bits that are reserved or are read-only are masked out of values
57 * written to us by software
59 #define PORTSC_RO_MASK 0x007001c0
60 #define PORTSC_RWC_MASK 0x0000002a
61 #define PORTSC_WKOC_E (1 << 22) // Wake on Over Current Enable
62 #define PORTSC_WKDS_E (1 << 21) // Wake on Disconnect Enable
63 #define PORTSC_WKCN_E (1 << 20) // Wake on Connect Enable
64 #define PORTSC_PTC (15 << 16) // Port Test Control
65 #define PORTSC_PTC_SH 16 // Port Test Control shift
66 #define PORTSC_PIC (3 << 14) // Port Indicator Control
67 #define PORTSC_PIC_SH 14 // Port Indicator Control Shift
68 #define PORTSC_POWNER (1 << 13) // Port Owner
69 #define PORTSC_PPOWER (1 << 12) // Port Power
70 #define PORTSC_LINESTAT (3 << 10) // Port Line Status
71 #define PORTSC_LINESTAT_SH 10 // Port Line Status Shift
72 #define PORTSC_PRESET (1 << 8) // Port Reset
73 #define PORTSC_SUSPEND (1 << 7) // Port Suspend
74 #define PORTSC_FPRES (1 << 6) // Force Port Resume
75 #define PORTSC_OCC (1 << 5) // Over Current Change
76 #define PORTSC_OCA (1 << 4) // Over Current Active
77 #define PORTSC_PEDC (1 << 3) // Port Enable/Disable Change
78 #define PORTSC_PED (1 << 2) // Port Enable/Disable
79 #define PORTSC_CSC (1 << 1) // Connect Status Change
80 #define PORTSC_CONNECT (1 << 0) // Current Connect Status
82 #endif /* HW_USB_EHCI_REGS_H */