hw/i2c/imx_i2c.c

   1 /*
   2  *  i.MX I2C Bus Serial Interface Emulation
   3  *
   4  *  Copyright (C) 2013 Jean-Christophe Dubois. <jcd@tribudubois.net>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License as published by the
   8  *  Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful, but WITHOUT
  12  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  14  *  for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License along
  17  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  18  *
  19  */
  20
  21 #include "qemu/osdep.h"
  22 #include "hw/i2c/imx_i2c.h"
  23 #include "hw/irq.h"
  24 #include "migration/vmstate.h"
  25 #include "hw/i2c/i2c.h"
  26 #include "qemu/log.h"
  27 #include "qemu/module.h"
  28
  29 #ifndef DEBUG_IMX_I2C
  30 #define DEBUG_IMX_I2C 0
  31 #endif
  32
  33 #define DPRINTF(fmt, args...) \
  34     do { \
  35         if (DEBUG_IMX_I2C) { \
  36             fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_I2C, \
  37                                              __func__, ##args); \
  38         } \
  39     } while (0)
  40
  41 static const char *imx_i2c_get_regname(unsigned offset)
  42 {
  43     switch (offset) {
  44     case IADR_ADDR:
  45         return "IADR";
  46     case IFDR_ADDR:
  47         return "IFDR";
  48     case I2CR_ADDR:
  49         return "I2CR";
  50     case I2SR_ADDR:
  51         return "I2SR";
  52     case I2DR_ADDR:
  53         return "I2DR";
  54     default:
  55         return "[?]";
  56     }
  57 }
  58
  59 static inline bool imx_i2c_is_enabled(IMXI2CState *s)
  60 {
  61     return s->i2cr & I2CR_IEN;
  62 }
  63
  64 static inline bool imx_i2c_interrupt_is_enabled(IMXI2CState *s)
  65 {
  66     return s->i2cr & I2CR_IIEN;
  67 }
  68
  69 static inline bool imx_i2c_is_master(IMXI2CState *s)
  70 {
  71     return s->i2cr & I2CR_MSTA;
  72 }
  73
  74 static void imx_i2c_reset(DeviceState *dev)
  75 {
  76     IMXI2CState *s = IMX_I2C(dev);
  77
  78     if (s->address != ADDR_RESET) {
  79         i2c_end_transfer(s->bus);
  80     }
  81
  82     s->address    = ADDR_RESET;
  83     s->iadr       = IADR_RESET;
  84     s->ifdr       = IFDR_RESET;
  85     s->i2cr       = I2CR_RESET;
  86     s->i2sr       = I2SR_RESET;
  87     s->i2dr_read  = I2DR_RESET;
  88     s->i2dr_write = I2DR_RESET;
  89 }
  90
  91 static inline void imx_i2c_raise_interrupt(IMXI2CState *s)
  92 {
  93     /*
  94      * raise an interrupt if the device is enabled and it is configured
  95      * to generate some interrupts.
  96      */
  97     if (imx_i2c_is_enabled(s) && imx_i2c_interrupt_is_enabled(s)) {
  98         s->i2sr |= I2SR_IIF;
  99         qemu_irq_raise(s->irq);
 100     }
 101 }
 102
 103 static uint64_t imx_i2c_read(void *opaque, hwaddr offset,
 104                              unsigned size)
 105 {
 106     uint16_t value;
 107     IMXI2CState *s = IMX_I2C(opaque);
 108
 109     switch (offset) {
 110     case IADR_ADDR:
 111         value = s->iadr;
 112         break;
 113     case IFDR_ADDR:
 114         value = s->ifdr;
 115         break;
 116     case I2CR_ADDR:
 117         value = s->i2cr;
 118         break;
 119     case I2SR_ADDR:
 120         value = s->i2sr;
 121         break;
 122     case I2DR_ADDR:
 123         value = s->i2dr_read;
 124
 125         if (imx_i2c_is_master(s)) {
 126             uint8_t ret = 0xff;
 127
 128             if (s->address == ADDR_RESET) {
 129                 /* something is wrong as the address is not set */
 130                 qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read "
 131                               "without specifying the slave address\n",
 132                               TYPE_IMX_I2C, __func__);
 133             } else if (s->i2cr & I2CR_MTX) {
 134                 qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read "
 135                               "but MTX is set\n", TYPE_IMX_I2C, __func__);
 136             } else {
 137                 /* get the next byte */
 138                 ret = i2c_recv(s->bus);
 139                 imx_i2c_raise_interrupt(s);
 140             }
 141
 142             s->i2dr_read = ret;
 143         } else {
 144             qemu_log_mask(LOG_UNIMP, "[%s]%s: slave mode not implemented\n",
 145                           TYPE_IMX_I2C, __func__);
 146         }
 147         break;
 148     default:
 149         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
 150                       HWADDR_PRIx "\n", TYPE_IMX_I2C, __func__, offset);
 151         value = 0;
 152         break;
 153     }
 154
 155     DPRINTF("read %s [0x%" HWADDR_PRIx "] -> 0x%02x\n",
 156             imx_i2c_get_regname(offset), offset, value);
 157
 158     return (uint64_t)value;
 159 }
 160
 161 static void imx_i2c_write(void *opaque, hwaddr offset,
 162                           uint64_t value, unsigned size)
 163 {
 164     IMXI2CState *s = IMX_I2C(opaque);
 165
 166     DPRINTF("write %s [0x%" HWADDR_PRIx "] <- 0x%02x\n",
 167             imx_i2c_get_regname(offset), offset, (int)value);
 168
 169     value &= 0xff;
 170
 171     switch (offset) {
 172     case IADR_ADDR:
 173         s->iadr = value & IADR_MASK;
 174         /* i2c_set_slave_address(s->bus, (uint8_t)s->iadr); */
 175         break;
 176     case IFDR_ADDR:
 177         s->ifdr = value & IFDR_MASK;
 178         break;
 179     case I2CR_ADDR:
 180         if (imx_i2c_is_enabled(s) && ((value & I2CR_IEN) == 0)) {
 181             /* This is a soft reset. IADR is preserved during soft resets */
 182             uint16_t iadr = s->iadr;
 183             imx_i2c_reset(DEVICE(s));
 184             s->iadr = iadr;
 185         } else { /* normal write */
 186             s->i2cr = value & I2CR_MASK;
 187
 188             if (imx_i2c_is_master(s)) {
 189                 /* set the bus to busy */
 190                 s->i2sr |= I2SR_IBB;
 191             } else { /* slave mode */
 192                 /* bus is not busy anymore */
 193                 s->i2sr &= ~I2SR_IBB;
 194
 195                 /*
 196                  * if we unset the master mode then it ends the ongoing
 197                  * transfer if any
 198                  */
 199                 if (s->address != ADDR_RESET) {
 200                     i2c_end_transfer(s->bus);
 201                     s->address = ADDR_RESET;
 202                 }
 203             }
 204
 205             if (s->i2cr & I2CR_RSTA) { /* Restart */
 206                 /* if this is a restart then it ends the ongoing transfer */
 207                 if (s->address != ADDR_RESET) {
 208                     i2c_end_transfer(s->bus);
 209                     s->address = ADDR_RESET;
 210                     s->i2cr &= ~I2CR_RSTA;
 211                 }
 212             }
 213         }
 214         break;
 215     case I2SR_ADDR:
 216         /*
 217          * if the user writes 0 to IIF then lower the interrupt and
 218          * reset the bit
 219          */
 220         if ((s->i2sr & I2SR_IIF) && !(value & I2SR_IIF)) {
 221             s->i2sr &= ~I2SR_IIF;
 222             qemu_irq_lower(s->irq);
 223         }
 224
 225         /*
 226          * if the user writes 0 to IAL, reset the bit
 227          */
 228         if ((s->i2sr & I2SR_IAL) && !(value & I2SR_IAL)) {
 229             s->i2sr &= ~I2SR_IAL;
 230         }
 231
 232         break;
 233     case I2DR_ADDR:
 234         /* if the device is not enabled, nothing to do */
 235         if (!imx_i2c_is_enabled(s)) {
 236             break;
 237         }
 238
 239         s->i2dr_write = value & I2DR_MASK;
 240
 241         if (imx_i2c_is_master(s)) {
 242             /* If this is the first write cycle then it is the slave addr */
 243             if (s->address == ADDR_RESET) {
 244                 if (i2c_start_transfer(s->bus, extract32(s->i2dr_write, 1, 7),
 245                                        extract32(s->i2dr_write, 0, 1))) {
 246                     /* if non zero is returned, the address is not valid */
 247                     s->i2sr |= I2SR_RXAK;
 248                 } else {
 249                     s->address = s->i2dr_write;
 250                     s->i2sr &= ~I2SR_RXAK;
 251                     imx_i2c_raise_interrupt(s);
 252                 }
 253             } else { /* This is a normal data write */
 254                 if (i2c_send(s->bus, s->i2dr_write)) {
 255                     /* if the target return non zero then end the transfer */
 256                     s->i2sr |= I2SR_RXAK;
 257                     s->address = ADDR_RESET;
 258                     i2c_end_transfer(s->bus);
 259                 } else {
 260                     s->i2sr &= ~I2SR_RXAK;
 261                     imx_i2c_raise_interrupt(s);
 262                 }
 263             }
 264         } else {
 265             qemu_log_mask(LOG_UNIMP, "[%s]%s: slave mode not implemented\n",
 266                           TYPE_IMX_I2C, __func__);
 267         }
 268         break;
 269     default:
 270         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
 271                       HWADDR_PRIx "\n", TYPE_IMX_I2C, __func__, offset);
 272         break;
 273     }
 274 }
 275
 276 static const MemoryRegionOps imx_i2c_ops = {
 277     .read = imx_i2c_read,
 278     .write = imx_i2c_write,
 279     .valid.min_access_size = 1,
 280     .valid.max_access_size = 2,
 281     .endianness = DEVICE_NATIVE_ENDIAN,
 282 };
 283
 284 static const VMStateDescription imx_i2c_vmstate = {
 285     .name = TYPE_IMX_I2C,
 286     .version_id = 1,
 287     .minimum_version_id = 1,
 288     .fields = (VMStateField[]) {
 289         VMSTATE_UINT16(address, IMXI2CState),
 290         VMSTATE_UINT16(iadr, IMXI2CState),
 291         VMSTATE_UINT16(ifdr, IMXI2CState),
 292         VMSTATE_UINT16(i2cr, IMXI2CState),
 293         VMSTATE_UINT16(i2sr, IMXI2CState),
 294         VMSTATE_UINT16(i2dr_read, IMXI2CState),
 295         VMSTATE_UINT16(i2dr_write, IMXI2CState),
 296         VMSTATE_END_OF_LIST()
 297     }
 298 };
 299
 300 static void imx_i2c_realize(DeviceState *dev, Error **errp)
 301 {
 302     IMXI2CState *s = IMX_I2C(dev);
 303
 304     memory_region_init_io(&s->iomem, OBJECT(s), &imx_i2c_ops, s, TYPE_IMX_I2C,
 305                           IMX_I2C_MEM_SIZE);
 306     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
 307     sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
 308     s->bus = i2c_init_bus(DEVICE(dev), NULL);
 309 }
 310
 311 static void imx_i2c_class_init(ObjectClass *klass, void *data)
 312 {
 313     DeviceClass *dc = DEVICE_CLASS(klass);
 314
 315     dc->vmsd = &imx_i2c_vmstate;
 316     dc->reset = imx_i2c_reset;
 317     dc->realize = imx_i2c_realize;
 318     dc->desc = "i.MX I2C Controller";
 319 }
 320
 321 static const TypeInfo imx_i2c_type_info = {
 322     .name = TYPE_IMX_I2C,
 323     .parent = TYPE_SYS_BUS_DEVICE,
 324     .instance_size = sizeof(IMXI2CState),
 325     .class_init = imx_i2c_class_init,
 326 };
 327
 328 static void imx_i2c_register_types(void)
 329 {
 330     type_register_static(&imx_i2c_type_info);
 331 }
 332
 333 type_init(imx_i2c_register_types)