3 #include "hw/nvram/fw_cfg.h"
7 * get_image_size: retrieve size of an image file
8 * @filename: Path to the image file
10 * Returns the size of the image file on success, -1 otherwise.
11 * On error, errno is also set as appropriate.
13 int64_t get_image_size(const char *filename
);
15 * load_image_size: load an image file into specified buffer
16 * @filename: Path to the image file
17 * @addr: Buffer to load image into
18 * @size: Size of buffer in bytes
20 * Load an image file from disk into the specified buffer.
21 * If the image is larger than the specified buffer, only
22 * @size bytes are read (this is not considered an error).
24 * Prefer to use the GLib function g_file_get_contents() rather
25 * than a "get_image_size()/g_malloc()/load_image_size()" sequence.
27 * Returns the number of bytes read, or -1 on error. On error,
28 * errno is also set as appropriate.
30 ssize_t
load_image_size(const char *filename
, void *addr
, size_t size
);
32 /**load_image_targphys_as:
33 * @filename: Path to the image file
34 * @addr: Address to load the image to
35 * @max_sz: The maximum size of the image to load
36 * @as: The AddressSpace to load the ELF to. The value of address_space_memory
37 * is used if nothing is supplied here.
39 * Load a fixed image into memory.
41 * Returns the size of the loaded image on success, -1 otherwise.
43 int load_image_targphys_as(const char *filename
,
44 hwaddr addr
, uint64_t max_sz
, AddressSpace
*as
);
46 /**load_targphys_hex_as:
47 * @filename: Path to the .hex file
48 * @entry: Store the entry point given by the .hex file
49 * @as: The AddressSpace to load the .hex file to. The value of
50 * address_space_memory is used if nothing is supplied here.
52 * Load a fixed .hex file into memory.
54 * Returns the size of the loaded .hex file on success, -1 otherwise.
56 int load_targphys_hex_as(const char *filename
, hwaddr
*entry
, AddressSpace
*as
);
58 /** load_image_targphys:
59 * Same as load_image_targphys_as(), but doesn't allow the caller to specify
62 int load_image_targphys(const char *filename
, hwaddr
,
66 * load_image_mr: load an image into a memory region
67 * @filename: Path to the image file
68 * @mr: Memory Region to load into
70 * Load the specified file into the memory region.
71 * The file loaded is registered as a ROM, so its contents will be
72 * reinstated whenever the system is reset.
73 * If the file is larger than the memory region's size the call will fail.
74 * Returns -1 on failure, or the size of the file.
76 int load_image_mr(const char *filename
, MemoryRegion
*mr
);
78 /* This is the limit on the maximum uncompressed image size that
79 * load_image_gzipped_buffer() and load_image_gzipped() will read. It prevents
80 * g_malloc() in those functions from allocating a huge amount of memory.
82 #define LOAD_IMAGE_MAX_GUNZIP_BYTES (256 << 20)
84 int load_image_gzipped_buffer(const char *filename
, uint64_t max_sz
,
86 int load_image_gzipped(const char *filename
, hwaddr addr
, uint64_t max_sz
);
88 #define ELF_LOAD_FAILED -1
89 #define ELF_LOAD_NOT_ELF -2
90 #define ELF_LOAD_WRONG_ARCH -3
91 #define ELF_LOAD_WRONG_ENDIAN -4
92 const char *load_elf_strerror(int error
);
95 * @filename: Path of ELF file
96 * @elf_note_fn: optional function to parse ELF Note type
97 * passed via @translate_opaque
98 * @translate_fn: optional function to translate load addresses
99 * @translate_opaque: opaque data passed to @translate_fn
100 * @pentry: Populated with program entry point. Ignored if NULL.
101 * @lowaddr: Populated with lowest loaded address. Ignored if NULL.
102 * @highaddr: Populated with highest loaded address. Ignored if NULL.
103 * @bigendian: Expected ELF endianness. 0 for LE otherwise BE
104 * @elf_machine: Expected ELF machine type
105 * @clear_lsb: Set to mask off LSB of addresses (Some architectures use
106 * this for non-address data)
107 * @data_swab: Set to order of byte swapping for data. 0 for no swap, 1
108 * for swapping bytes within halfwords, 2 for bytes within
109 * words and 3 for within doublewords.
110 * @as: The AddressSpace to load the ELF to. The value of address_space_memory
111 * is used if nothing is supplied here.
112 * @load_rom : Load ELF binary as ROM
113 * @sym_cb: Callback function for symbol table entries
115 * Load an ELF file's contents to the emulated system's address space.
116 * Clients may optionally specify a callback to perform address
117 * translations. @pentry, @lowaddr and @highaddr are optional pointers
118 * which will be populated with various load information. @bigendian and
119 * @elf_machine give the expected endianness and machine for the ELF the
120 * load will fail if the target ELF does not match. Some architectures
121 * have some architecture-specific behaviours that come into effect when
122 * their particular values for @elf_machine are set.
123 * If @elf_machine is EM_NONE then the machine type will be read from the
124 * ELF header and no checks will be carried out against the machine type.
126 typedef void (*symbol_fn_t
)(const char *st_name
, int st_info
,
127 uint64_t st_value
, uint64_t st_size
);
129 int load_elf_ram_sym(const char *filename
,
130 uint64_t (*elf_note_fn
)(void *, void *, bool),
131 uint64_t (*translate_fn
)(void *, uint64_t),
132 void *translate_opaque
, uint64_t *pentry
,
133 uint64_t *lowaddr
, uint64_t *highaddr
, int big_endian
,
134 int elf_machine
, int clear_lsb
, int data_swab
,
135 AddressSpace
*as
, bool load_rom
, symbol_fn_t sym_cb
);
138 * Same as load_elf_ram_sym(), but doesn't allow the caller to specify a
139 * symbol callback function
141 int load_elf_ram(const char *filename
,
142 uint64_t (*elf_note_fn
)(void *, void *, bool),
143 uint64_t (*translate_fn
)(void *, uint64_t),
144 void *translate_opaque
, uint64_t *pentry
, uint64_t *lowaddr
,
145 uint64_t *highaddr
, int big_endian
, int elf_machine
,
146 int clear_lsb
, int data_swab
, AddressSpace
*as
,
150 * Same as load_elf_ram(), but always loads the elf as ROM
152 int load_elf_as(const char *filename
,
153 uint64_t (*elf_note_fn
)(void *, void *, bool),
154 uint64_t (*translate_fn
)(void *, uint64_t),
155 void *translate_opaque
, uint64_t *pentry
, uint64_t *lowaddr
,
156 uint64_t *highaddr
, int big_endian
, int elf_machine
,
157 int clear_lsb
, int data_swab
, AddressSpace
*as
);
160 * Same as load_elf_as(), but doesn't allow the caller to specify an
163 int load_elf(const char *filename
,
164 uint64_t (*elf_note_fn
)(void *, void *, bool),
165 uint64_t (*translate_fn
)(void *, uint64_t),
166 void *translate_opaque
, uint64_t *pentry
, uint64_t *lowaddr
,
167 uint64_t *highaddr
, int big_endian
, int elf_machine
,
168 int clear_lsb
, int data_swab
);
171 * @filename: Path of ELF file
172 * @hdr: Buffer to populate with header data. Header data will not be
173 * filled if set to NULL.
174 * @is64: Set to true if the ELF is 64bit. Ignored if set to NULL
175 * @errp: Populated with an error in failure cases
177 * Inspect an ELF file's header. Read its full header contents into a
178 * buffer and/or determine if the ELF is 64bit.
180 void load_elf_hdr(const char *filename
, void *hdr
, bool *is64
, Error
**errp
);
182 int load_aout(const char *filename
, hwaddr addr
, int max_sz
,
183 int bswap_needed
, hwaddr target_page_size
);
185 #define LOAD_UIMAGE_LOADADDR_INVALID (-1)
188 * @filename: Path of uimage file
189 * @ep: Populated with program entry point. Ignored if NULL.
190 * @loadaddr: load address if none specified in the image or when loading a
191 * ramdisk. Populated with the load address. Ignored if NULL or
192 * LOAD_UIMAGE_LOADADDR_INVALID (images which do not specify a load
193 * address will not be loadable).
194 * @is_linux: Is set to true if the image loaded is Linux. Ignored if NULL.
195 * @translate_fn: optional function to translate load addresses
196 * @translate_opaque: opaque data passed to @translate_fn
197 * @as: The AddressSpace to load the ELF to. The value of address_space_memory
198 * is used if nothing is supplied here.
200 * Loads a u-boot image into memory.
202 * Returns the size of the loaded image on success, -1 otherwise.
204 int load_uimage_as(const char *filename
, hwaddr
*ep
,
205 hwaddr
*loadaddr
, int *is_linux
,
206 uint64_t (*translate_fn
)(void *, uint64_t),
207 void *translate_opaque
, AddressSpace
*as
);
210 * Same as load_uimage_as(), but doesn't allow the caller to specify an
213 int load_uimage(const char *filename
, hwaddr
*ep
,
214 hwaddr
*loadaddr
, int *is_linux
,
215 uint64_t (*translate_fn
)(void *, uint64_t),
216 void *translate_opaque
);
220 * @filename: Path to the ramdisk image
221 * @addr: Memory address to load the ramdisk to
222 * @max_sz: Maximum allowed ramdisk size (for non-u-boot ramdisks)
223 * @as: The AddressSpace to load the ELF to. The value of address_space_memory
224 * is used if nothing is supplied here.
226 * Load a ramdisk image with U-Boot header to the specified memory
229 * Returns the size of the loaded image on success, -1 otherwise.
231 int load_ramdisk_as(const char *filename
, hwaddr addr
, uint64_t max_sz
,
236 * Same as load_ramdisk_as(), but doesn't allow the caller to specify
239 int load_ramdisk(const char *filename
, hwaddr addr
, uint64_t max_sz
);
241 ssize_t
gunzip(void *dst
, size_t dstlen
, uint8_t *src
, size_t srclen
);
243 ssize_t
read_targphys(const char *name
,
244 int fd
, hwaddr dst_addr
, size_t nbytes
);
245 void pstrcpy_targphys(const char *name
,
246 hwaddr dest
, int buf_size
,
249 extern bool option_rom_has_mr
;
250 extern bool rom_file_has_mr
;
252 int rom_add_file(const char *file
, const char *fw_dir
,
253 hwaddr addr
, int32_t bootindex
,
254 bool option_rom
, MemoryRegion
*mr
, AddressSpace
*as
);
255 MemoryRegion
*rom_add_blob(const char *name
, const void *blob
, size_t len
,
256 size_t max_len
, hwaddr addr
,
257 const char *fw_file_name
,
258 FWCfgCallback fw_callback
,
259 void *callback_opaque
, AddressSpace
*as
,
261 int rom_add_elf_program(const char *name
, void *data
, size_t datasize
,
262 size_t romsize
, hwaddr addr
, AddressSpace
*as
);
263 int rom_check_and_register_reset(void);
264 void rom_set_fw(FWCfgState
*f
);
265 void rom_set_order_override(int order
);
266 void rom_reset_order_override(void);
269 * rom_transaction_begin:
271 * Call this before of a series of rom_add_*() calls. Call
272 * rom_transaction_end() afterwards to commit or abort. These functions are
273 * useful for undoing a series of rom_add_*() calls if image file loading fails
276 void rom_transaction_begin(void);
279 * rom_transaction_end:
280 * @commit: true to commit added roms, false to drop added roms
282 * Call this after a series of rom_add_*() calls. See rom_transaction_begin().
284 void rom_transaction_end(bool commit
);
286 int rom_copy(uint8_t *dest
, hwaddr addr
, size_t size
);
287 void *rom_ptr(hwaddr addr
, size_t size
);
288 void hmp_info_roms(Monitor
*mon
, const QDict
*qdict
);
290 #define rom_add_file_fixed(_f, _a, _i) \
291 rom_add_file(_f, NULL, _a, _i, false, NULL, NULL)
292 #define rom_add_blob_fixed(_f, _b, _l, _a) \
293 rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, NULL, true)
294 #define rom_add_file_mr(_f, _mr, _i) \
295 rom_add_file(_f, NULL, 0, _i, false, _mr, NULL)
296 #define rom_add_file_as(_f, _as, _i) \
297 rom_add_file(_f, NULL, 0, _i, false, NULL, _as)
298 #define rom_add_file_fixed_as(_f, _a, _i, _as) \
299 rom_add_file(_f, NULL, _a, _i, false, NULL, _as)
300 #define rom_add_blob_fixed_as(_f, _b, _l, _a, _as) \
301 rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, _as, true)
303 #define PC_ROM_MIN_VGA 0xc0000
304 #define PC_ROM_MIN_OPTION 0xc8000
305 #define PC_ROM_MAX 0xe0000
306 #define PC_ROM_ALIGN 0x800
307 #define PC_ROM_SIZE (PC_ROM_MAX - PC_ROM_MIN_VGA)
309 int rom_add_vga(const char *file
);
310 int rom_add_option(const char *file
, int32_t bootindex
);
312 /* This is the usual maximum in uboot, so if a uImage overflows this, it would
313 * overflow on real hardware too. */
314 #define UBOOT_MAX_GUNZIP_BYTES (64 << 20)