hw/versatilepb.c

   1 /*
   2  * ARM Versatile Platform/Application Baseboard System emulation.
   3  *
   4  * Copyright (c) 2005-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 #include "hw.h"
  11 #include "arm-misc.h"
  12 #include "primecell.h"
  13 #include "devices.h"
  14 #include "net.h"
  15 #include "sysemu.h"
  16 #include "pci.h"
  17 #include "boards.h"
  18
  19 /* Primary interrupt controller.  */
  20
  21 typedef struct vpb_sic_state
  22 {
  23   uint32_t level;
  24   uint32_t mask;
  25   uint32_t pic_enable;
  26   qemu_irq *parent;
  27   int irq;
  28 } vpb_sic_state;
  29
  30 static void vpb_sic_update(vpb_sic_state *s)
  31 {
  32     uint32_t flags;
  33
  34     flags = s->level & s->mask;
  35     qemu_set_irq(s->parent[s->irq], flags != 0);
  36 }
  37
  38 static void vpb_sic_update_pic(vpb_sic_state *s)
  39 {
  40     int i;
  41     uint32_t mask;
  42
  43     for (i = 21; i <= 30; i++) {
  44         mask = 1u << i;
  45         if (!(s->pic_enable & mask))
  46             continue;
  47         qemu_set_irq(s->parent[i], (s->level & mask) != 0);
  48     }
  49 }
  50
  51 static void vpb_sic_set_irq(void *opaque, int irq, int level)
  52 {
  53     vpb_sic_state *s = (vpb_sic_state *)opaque;
  54     if (level)
  55         s->level |= 1u << irq;
  56     else
  57         s->level &= ~(1u << irq);
  58     if (s->pic_enable & (1u << irq))
  59         qemu_set_irq(s->parent[irq], level);
  60     vpb_sic_update(s);
  61 }
  62
  63 static uint32_t vpb_sic_read(void *opaque, target_phys_addr_t offset)
  64 {
  65     vpb_sic_state *s = (vpb_sic_state *)opaque;
  66
  67     switch (offset >> 2) {
  68     case 0: /* STATUS */
  69         return s->level & s->mask;
  70     case 1: /* RAWSTAT */
  71         return s->level;
  72     case 2: /* ENABLE */
  73         return s->mask;
  74     case 4: /* SOFTINT */
  75         return s->level & 1;
  76     case 8: /* PICENABLE */
  77         return s->pic_enable;
  78     default:
  79         printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset);
  80         return 0;
  81     }
  82 }
  83
  84 static void vpb_sic_write(void *opaque, target_phys_addr_t offset,
  85                           uint32_t value)
  86 {
  87     vpb_sic_state *s = (vpb_sic_state *)opaque;
  88
  89     switch (offset >> 2) {
  90     case 2: /* ENSET */
  91         s->mask |= value;
  92         break;
  93     case 3: /* ENCLR */
  94         s->mask &= ~value;
  95         break;
  96     case 4: /* SOFTINTSET */
  97         if (value)
  98             s->mask |= 1;
  99         break;
 100     case 5: /* SOFTINTCLR */
 101         if (value)
 102             s->mask &= ~1u;
 103         break;
 104     case 8: /* PICENSET */
 105         s->pic_enable |= (value & 0x7fe00000);
 106         vpb_sic_update_pic(s);
 107         break;
 108     case 9: /* PICENCLR */
 109         s->pic_enable &= ~value;
 110         vpb_sic_update_pic(s);
 111         break;
 112     default:
 113         printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset);
 114         return;
 115     }
 116     vpb_sic_update(s);
 117 }
 118
 119 static CPUReadMemoryFunc *vpb_sic_readfn[] = {
 120    vpb_sic_read,
 121    vpb_sic_read,
 122    vpb_sic_read
 123 };
 124
 125 static CPUWriteMemoryFunc *vpb_sic_writefn[] = {
 126    vpb_sic_write,
 127    vpb_sic_write,
 128    vpb_sic_write
 129 };
 130
 131 static qemu_irq *vpb_sic_init(uint32_t base, qemu_irq *parent, int irq)
 132 {
 133     vpb_sic_state *s;
 134     qemu_irq *qi;
 135     int iomemtype;
 136
 137     s = (vpb_sic_state *)qemu_mallocz(sizeof(vpb_sic_state));
 138     if (!s)
 139         return NULL;
 140     qi = qemu_allocate_irqs(vpb_sic_set_irq, s, 32);
 141     s->parent = parent;
 142     s->irq = irq;
 143     iomemtype = cpu_register_io_memory(0, vpb_sic_readfn,
 144                                        vpb_sic_writefn, s);
 145     cpu_register_physical_memory(base, 0x00001000, iomemtype);
 146     /* ??? Save/restore.  */
 147     return qi;
 148 }
 149
 150 /* Board init.  */
 151
 152 /* The AB and PB boards both use the same core, just with different
 153    peripherans and expansion busses.  For now we emulate a subset of the
 154    PB peripherals and just change the board ID.  */
 155
 156 static struct arm_boot_info versatile_binfo;
 157
 158 static void versatile_init(ram_addr_t ram_size, int vga_ram_size,
 159                      const char *boot_device,
 160                      const char *kernel_filename, const char *kernel_cmdline,
 161                      const char *initrd_filename, const char *cpu_model,
 162                      int board_id)
 163 {
 164     CPUState *env;
 165     qemu_irq *pic;
 166     qemu_irq *sic;
 167     void *scsi_hba;
 168     PCIBus *pci_bus;
 169     NICInfo *nd;
 170     int n;
 171     int done_smc = 0;
 172     int index;
 173
 174     if (!cpu_model)
 175         cpu_model = "arm926";
 176     env = cpu_init(cpu_model);
 177     if (!env) {
 178         fprintf(stderr, "Unable to find CPU definition\n");
 179         exit(1);
 180     }
 181     /* ??? RAM should repeat to fill physical memory space.  */
 182     /* SDRAM at address zero.  */
 183     cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
 184
 185     arm_sysctl_init(0x10000000, 0x41007004);
 186     pic = arm_pic_init_cpu(env);
 187     pic = pl190_init(0x10140000, pic[0], pic[1]);
 188     sic = vpb_sic_init(0x10003000, pic, 31);
 189     pl050_init(0x10006000, sic[3], 0);
 190     pl050_init(0x10007000, sic[4], 1);
 191
 192     pci_bus = pci_vpb_init(sic, 27, 0);
 193     /* The Versatile PCI bridge does not provide access to PCI IO space,
 194        so many of the qemu PCI devices are not useable.  */
 195     for(n = 0; n < nb_nics; n++) {
 196         nd = &nd_table[n];
 197
 198         if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
 199             smc91c111_init(nd, 0x10010000, sic[25]);
 200             done_smc = 1;
 201         } else {
 202             pci_nic_init(pci_bus, nd, -1, "rtl8139");
 203         }
 204     }
 205     if (usb_enabled) {
 206         usb_ohci_init_pci(pci_bus, 3, -1);
 207     }
 208     if (drive_get_max_bus(IF_SCSI) > 0) {
 209         fprintf(stderr, "qemu: too many SCSI bus\n");
 210         exit(1);
 211     }
 212     scsi_hba = lsi_scsi_init(pci_bus, -1);
 213     for (n = 0; n < LSI_MAX_DEVS; n++) {
 214         index = drive_get_index(IF_SCSI, 0, n);
 215         if (index == -1)
 216             continue;
 217         lsi_scsi_attach(scsi_hba, drives_table[index].bdrv, n);
 218     }
 219
 220     pl011_init(0x101f1000, pic[12], serial_hds[0], PL011_ARM);
 221     pl011_init(0x101f2000, pic[13], serial_hds[1], PL011_ARM);
 222     pl011_init(0x101f3000, pic[14], serial_hds[2], PL011_ARM);
 223     pl011_init(0x10009000, sic[6], serial_hds[3], PL011_ARM);
 224
 225     pl080_init(0x10130000, pic[17], 8);
 226     sp804_init(0x101e2000, pic[4]);
 227     sp804_init(0x101e3000, pic[5]);
 228
 229     /* The versatile/PB actually has a modified Color LCD controller
 230        that includes hardware cursor support from the PL111.  */
 231     pl110_init(0x10120000, pic[16], 1);
 232
 233     index = drive_get_index(IF_SD, 0, 0);
 234     if (index == -1) {
 235         fprintf(stderr, "qemu: missing SecureDigital card\n");
 236         exit(1);
 237     }
 238
 239     pl181_init(0x10005000, drives_table[index].bdrv, sic[22], sic[1]);
 240 #if 0
 241     /* Disabled because there's no way of specifying a block device.  */
 242     pl181_init(0x1000b000, NULL, sic, 23, 2);
 243 #endif
 244
 245     /* Add PL031 Real Time Clock. */
 246     pl031_init(0x101e8000,pic[10]);
 247
 248     /* Memory map for Versatile/PB:  */
 249     /* 0x10000000 System registers.  */
 250     /* 0x10001000 PCI controller config registers.  */
 251     /* 0x10002000 Serial bus interface.  */
 252     /*  0x10003000 Secondary interrupt controller.  */
 253     /* 0x10004000 AACI (audio).  */
 254     /*  0x10005000 MMCI0.  */
 255     /*  0x10006000 KMI0 (keyboard).  */
 256     /*  0x10007000 KMI1 (mouse).  */
 257     /* 0x10008000 Character LCD Interface.  */
 258     /*  0x10009000 UART3.  */
 259     /* 0x1000a000 Smart card 1.  */
 260     /*  0x1000b000 MMCI1.  */
 261     /*  0x10010000 Ethernet.  */
 262     /* 0x10020000 USB.  */
 263     /* 0x10100000 SSMC.  */
 264     /* 0x10110000 MPMC.  */
 265     /*  0x10120000 CLCD Controller.  */
 266     /*  0x10130000 DMA Controller.  */
 267     /*  0x10140000 Vectored interrupt controller.  */
 268     /* 0x101d0000 AHB Monitor Interface.  */
 269     /* 0x101e0000 System Controller.  */
 270     /* 0x101e1000 Watchdog Interface.  */
 271     /* 0x101e2000 Timer 0/1.  */
 272     /* 0x101e3000 Timer 2/3.  */
 273     /* 0x101e4000 GPIO port 0.  */
 274     /* 0x101e5000 GPIO port 1.  */
 275     /* 0x101e6000 GPIO port 2.  */
 276     /* 0x101e7000 GPIO port 3.  */
 277     /* 0x101e8000 RTC.  */
 278     /* 0x101f0000 Smart card 0.  */
 279     /*  0x101f1000 UART0.  */
 280     /*  0x101f2000 UART1.  */
 281     /*  0x101f3000 UART2.  */
 282     /* 0x101f4000 SSPI.  */
 283
 284     versatile_binfo.ram_size = ram_size;
 285     versatile_binfo.kernel_filename = kernel_filename;
 286     versatile_binfo.kernel_cmdline = kernel_cmdline;
 287     versatile_binfo.initrd_filename = initrd_filename;
 288     versatile_binfo.board_id = board_id;
 289     arm_load_kernel(env, &versatile_binfo);
 290 }
 291
 292 static void vpb_init(ram_addr_t ram_size, int vga_ram_size,
 293                      const char *boot_device,
 294                      const char *kernel_filename, const char *kernel_cmdline,
 295                      const char *initrd_filename, const char *cpu_model)
 296 {
 297     versatile_init(ram_size, vga_ram_size,
 298                    boot_device,
 299                    kernel_filename, kernel_cmdline,
 300                    initrd_filename, cpu_model, 0x183);
 301 }
 302
 303 static void vab_init(ram_addr_t ram_size, int vga_ram_size,
 304                      const char *boot_device,
 305                      const char *kernel_filename, const char *kernel_cmdline,
 306                      const char *initrd_filename, const char *cpu_model)
 307 {
 308     versatile_init(ram_size, vga_ram_size,
 309                    boot_device,
 310                    kernel_filename, kernel_cmdline,
 311                    initrd_filename, cpu_model, 0x25e);
 312 }
 313
 314 QEMUMachine versatilepb_machine = {
 315     .name = "versatilepb",
 316     .desc = "ARM Versatile/PB (ARM926EJ-S)",
 317     .init = vpb_init,
 318     .use_scsi = 1,
 319 };
 320
 321 QEMUMachine versatileab_machine = {
 322     .name = "versatileab",
 323     .desc = "ARM Versatile/AB (ARM926EJ-S)",
 324     .init = vab_init,
 325     .use_scsi = 1,
 326 };