hw/mcf5208.c

   1 /*
   2  * Motorola ColdFire MCF5208 SoC emulation.
   3  *
   4  * Copyright (c) 2007 CodeSourcery.
   5  *
   6  * This code is licenced under the GPL
   7  */
   8 #include "hw.h"
   9 #include "mcf.h"
  10 #include "qemu-timer.h"
  11 #include "sysemu.h"
  12 #include "net.h"
  13 #include "boards.h"
  14
  15 #define SYS_FREQ 66000000
  16
  17 #define PCSR_EN         0x0001
  18 #define PCSR_RLD        0x0002
  19 #define PCSR_PIF        0x0004
  20 #define PCSR_PIE        0x0008
  21 #define PCSR_OVW        0x0010
  22 #define PCSR_DBG        0x0020
  23 #define PCSR_DOZE       0x0040
  24 #define PCSR_PRE_SHIFT  8
  25 #define PCSR_PRE_MASK   0x0f00
  26
  27 typedef struct {
  28     qemu_irq irq;
  29     ptimer_state *timer;
  30     uint16_t pcsr;
  31     uint16_t pmr;
  32     uint16_t pcntr;
  33 } m5208_timer_state;
  34
  35 static void m5208_timer_update(m5208_timer_state *s)
  36 {
  37     if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
  38         qemu_irq_raise(s->irq);
  39     else
  40         qemu_irq_lower(s->irq);
  41 }
  42
  43 static void m5208_timer_write(void *opaque, target_phys_addr_t offset,
  44                               uint32_t value)
  45 {
  46     m5208_timer_state *s = (m5208_timer_state *)opaque;
  47     int prescale;
  48     int limit;
  49     switch (offset) {
  50     case 0:
  51         /* The PIF bit is set-to-clear.  */
  52         if (value & PCSR_PIF) {
  53             s->pcsr &= ~PCSR_PIF;
  54             value &= ~PCSR_PIF;
  55         }
  56         /* Avoid frobbing the timer if we're just twiddling IRQ bits. */
  57         if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
  58             s->pcsr = value;
  59             m5208_timer_update(s);
  60             return;
  61         }
  62
  63         if (s->pcsr & PCSR_EN)
  64             ptimer_stop(s->timer);
  65
  66         s->pcsr = value;
  67
  68         prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
  69         ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
  70         if (s->pcsr & PCSR_RLD)
  71             limit = s->pmr;
  72         else
  73             limit = 0xffff;
  74         ptimer_set_limit(s->timer, limit, 0);
  75
  76         if (s->pcsr & PCSR_EN)
  77             ptimer_run(s->timer, 0);
  78         break;
  79     case 2:
  80         s->pmr = value;
  81         s->pcsr &= ~PCSR_PIF;
  82         if ((s->pcsr & PCSR_RLD) == 0) {
  83             if (s->pcsr & PCSR_OVW)
  84                 ptimer_set_count(s->timer, value);
  85         } else {
  86             ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
  87         }
  88         break;
  89     case 4:
  90         break;
  91     default:
  92         hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
  93         break;
  94     }
  95     m5208_timer_update(s);
  96 }
  97
  98 static void m5208_timer_trigger(void *opaque)
  99 {
 100     m5208_timer_state *s = (m5208_timer_state *)opaque;
 101     s->pcsr |= PCSR_PIF;
 102     m5208_timer_update(s);
 103 }
 104
 105 static uint32_t m5208_timer_read(void *opaque, target_phys_addr_t addr)
 106 {
 107     m5208_timer_state *s = (m5208_timer_state *)opaque;
 108     switch (addr) {
 109     case 0:
 110         return s->pcsr;
 111     case 2:
 112         return s->pmr;
 113     case 4:
 114         return ptimer_get_count(s->timer);
 115     default:
 116         hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
 117         return 0;
 118     }
 119 }
 120
 121 static CPUReadMemoryFunc *m5208_timer_readfn[] = {
 122    m5208_timer_read,
 123    m5208_timer_read,
 124    m5208_timer_read
 125 };
 126
 127 static CPUWriteMemoryFunc *m5208_timer_writefn[] = {
 128    m5208_timer_write,
 129    m5208_timer_write,
 130    m5208_timer_write
 131 };
 132
 133 static uint32_t m5208_sys_read(void *opaque, target_phys_addr_t addr)
 134 {
 135     switch (addr) {
 136     case 0x110: /* SDCS0 */
 137         {
 138             int n;
 139             for (n = 0; n < 32; n++) {
 140                 if (ram_size < (2u << n))
 141                     break;
 142             }
 143             return (n - 1)  | 0x40000000;
 144         }
 145     case 0x114: /* SDCS1 */
 146         return 0;
 147
 148     default:
 149         hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
 150         return 0;
 151     }
 152 }
 153
 154 static void m5208_sys_write(void *opaque, target_phys_addr_t addr,
 155                             uint32_t value)
 156 {
 157     hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
 158 }
 159
 160 static CPUReadMemoryFunc *m5208_sys_readfn[] = {
 161    m5208_sys_read,
 162    m5208_sys_read,
 163    m5208_sys_read
 164 };
 165
 166 static CPUWriteMemoryFunc *m5208_sys_writefn[] = {
 167    m5208_sys_write,
 168    m5208_sys_write,
 169    m5208_sys_write
 170 };
 171
 172 static void mcf5208_sys_init(qemu_irq *pic)
 173 {
 174     int iomemtype;
 175     m5208_timer_state *s;
 176     QEMUBH *bh;
 177     int i;
 178
 179     iomemtype = cpu_register_io_memory(0, m5208_sys_readfn,
 180                                        m5208_sys_writefn, NULL);
 181     /* SDRAMC.  */
 182     cpu_register_physical_memory(0xfc0a8000, 0x00004000, iomemtype);
 183     /* Timers.  */
 184     for (i = 0; i < 2; i++) {
 185         s = (m5208_timer_state *)qemu_mallocz(sizeof(m5208_timer_state));
 186         bh = qemu_bh_new(m5208_timer_trigger, s);
 187         s->timer = ptimer_init(bh);
 188         iomemtype = cpu_register_io_memory(0, m5208_timer_readfn,
 189                                            m5208_timer_writefn, s);
 190         cpu_register_physical_memory(0xfc080000 + 0x4000 * i, 0x00004000,
 191                                      iomemtype);
 192         s->irq = pic[4 + i];
 193     }
 194 }
 195
 196 static void mcf5208evb_init(ram_addr_t ram_size,
 197                      const char *boot_device,
 198                      const char *kernel_filename, const char *kernel_cmdline,
 199                      const char *initrd_filename, const char *cpu_model)
 200 {
 201     CPUState *env;
 202     int kernel_size;
 203     uint64_t elf_entry;
 204     target_ulong entry;
 205     qemu_irq *pic;
 206
 207     if (!cpu_model)
 208         cpu_model = "m5208";
 209     env = cpu_init(cpu_model);
 210     if (!env) {
 211         fprintf(stderr, "Unable to find m68k CPU definition\n");
 212         exit(1);
 213     }
 214
 215     /* Initialize CPU registers.  */
 216     env->vbr = 0;
 217     /* TODO: Configure BARs.  */
 218
 219     /* DRAM at 0x40000000 */
 220     cpu_register_physical_memory(0x40000000, ram_size,
 221         qemu_ram_alloc(ram_size) | IO_MEM_RAM);
 222
 223     /* Internal SRAM.  */
 224     cpu_register_physical_memory(0x80000000, 16384,
 225         qemu_ram_alloc(16384) | IO_MEM_RAM);
 226
 227     /* Internal peripherals.  */
 228     pic = mcf_intc_init(0xfc048000, env);
 229
 230     mcf_uart_mm_init(0xfc060000, pic[26], serial_hds[0]);
 231     mcf_uart_mm_init(0xfc064000, pic[27], serial_hds[1]);
 232     mcf_uart_mm_init(0xfc068000, pic[28], serial_hds[2]);
 233
 234     mcf5208_sys_init(pic);
 235
 236     if (nb_nics > 1) {
 237         fprintf(stderr, "Too many NICs\n");
 238         exit(1);
 239     }
 240     if (nd_table[0].vlan)
 241         mcf_fec_init(&nd_table[0], 0xfc030000, pic + 36);
 242
 243     /*  0xfc000000 SCM.  */
 244     /*  0xfc004000 XBS.  */
 245     /*  0xfc008000 FlexBus CS.  */
 246     /* 0xfc030000 FEC.  */
 247     /*  0xfc040000 SCM + Power management.  */
 248     /*  0xfc044000 eDMA.  */
 249     /* 0xfc048000 INTC.  */
 250     /*  0xfc058000 I2C.  */
 251     /*  0xfc05c000 QSPI.  */
 252     /* 0xfc060000 UART0.  */
 253     /* 0xfc064000 UART0.  */
 254     /* 0xfc068000 UART0.  */
 255     /*  0xfc070000 DMA timers.  */
 256     /* 0xfc080000 PIT0.  */
 257     /* 0xfc084000 PIT1.  */
 258     /*  0xfc088000 EPORT.  */
 259     /*  0xfc08c000 Watchdog.  */
 260     /*  0xfc090000 clock module.  */
 261     /*  0xfc0a0000 CCM + reset.  */
 262     /*  0xfc0a4000 GPIO.  */
 263     /* 0xfc0a8000 SDRAM controller.  */
 264
 265     /* Load kernel.  */
 266     if (!kernel_filename) {
 267         fprintf(stderr, "Kernel image must be specified\n");
 268         exit(1);
 269     }
 270
 271     kernel_size = load_elf(kernel_filename, 0, &elf_entry, NULL, NULL);
 272     entry = elf_entry;
 273     if (kernel_size < 0) {
 274         kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL);
 275     }
 276     if (kernel_size < 0) {
 277         kernel_size = load_image_targphys(kernel_filename, 0x40000000,
 278                                           ram_size);
 279         entry = 0x40000000;
 280     }
 281     if (kernel_size < 0) {
 282         fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename);
 283         exit(1);
 284     }
 285
 286     env->pc = entry;
 287 }
 288
 289 static QEMUMachine mcf5208evb_machine = {
 290     .name = "mcf5208evb",
 291     .desc = "MCF5206EVB",
 292     .init = mcf5208evb_init,
 293     .is_default = 1,
 294 };
 295
 296 static void mcf5208evb_machine_init(void)
 297 {
 298     qemu_register_machine(&mcf5208evb_machine);
 299 }
 300
 301 machine_init(mcf5208evb_machine_init);